Condition: excellent (used), Year of construction: 2020, operating hours: 9,900 h, Functionality: fully functional, clamping force: 800 kN, screw diameter: 25 mm, injection pressure: 2.025 bar, ejector force: 22 N, ejector stroke: 150 mm, TECHNICAL DETAILS Closing force of the mold: 800 kN Mold opening force: 120 kN Clamping platen dimensions (h x v): 640 x 590 mm Clearance between the columns (h x v): 485 x 435 mm Opening stroke of the mold: 350 mm Mold height: 150 - 400 mm Opening width: 750 mm Ejector stroke: 150 mm Ejector force forwards/backwards: 22 / 10 kN Ejector speed: 350 mm/s Injection unit Screw diameter: 25 mm Ratio Ls/D: 20 Injection pressure: 2.025 bar Injection volume: 49 cm³ Injection weight: 45 g Dcsleul Uiheitli Hsg Injection speed: 125 mm/s Injection capacity: 61 cm³/s Screw speed: 382 1/min Plasticizing capacity: 7.8 g/s Torque: 89 Nm Thrust of the nozzle: 21 kN MACHINE DETAILS Net weight with control cabinet: 5.9 t Machine dimensions (L x W x H): 4.80 x 1.60 x 1.88 m Connected load: 6.1 kW Fuse rating: 63 A Installed heating capacity: 6.3 kW Number of cylinder heating zones: 4 Drying time / stroke according to Euromap 6: 1.5 s / 340 mm Oil tank capacity: 120 dm³ EQUIPMENT - Five-point double-lever toggle clamping unit mechanism (three-platen unit) with servo-electric drive - Injection unit with servo-electric drive for injection and plasticizing as well as servo-hydraulic drive for moving the entire injection unit - MC6 control system based on an industrial PC with real-time Ethernet technology - Plasticizing system with a screw diameter of 25 mm, nozzle radius 10 mm, nozzle opening 4 mm

Condition: good (used), Year of construction: 2000, Injection molding machine Arburg 520C 2000-675 Dcslitouipbrjli Heg Year of manufacture: 2000 Closing unit Closing force [kN] 2000 Clamping plate dimensions (hxv) [mm] 685 x 685 Clearance between columns (hxv) [mm] 520 x 520 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 353 Injection weight [g] 297 Injection pressure [bar] 2080 Electric-hydraulic equipment Pump motor power [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (L x W x H) [m] 5.35x1.93x2.20

Condition: good (used), Year of construction: 1998, Clamping force: 800 kN, Screw diameter: 40 mm, Stroke volume: 204 cm³, Injection volume: 131 cm³/s, Screw speed: 310 1/min, Plasticizing capacity max.29 g/s, Nozzle pressure: 84 kN, Nominal power of pump motor: 15 kW, Installed heating power: 12 kW, Adjustable barrel heating zones: 5, Drying cycle rate: 2000 1/h, Tank capacity: 270 ltr, Machine dimensions approx.: 4.10 m x 1.40 m x 2.02 m, Total weight of machine: 3500 kg, Weight of mold: 860 kg Dceljuc Szzeitli Hjg

Condition: excellent (used), Year of construction: 2003, operating hours: 54,000 h, Functionality: fully functional, machine/vehicle number: 75-268, clamping force: 270 kN, screw diameter: 52 mm, clearance between the columns: 630 mm, displacement volume: 580 cm³, injection pressure: 2.2 bar, injection weight: 580 g, mold height (min.): 250 mm, plate width: 940 mm, plate height: 880 mm, total length: 6,000 mm, total width: 2,000 mm, total height: 3,500 mm, overall weight: 10,000 kg, connection type: Euromap, The machine has been fully operationnal until last month, the machine is including a Dal Maschio Robot from 2013 : DMG Type 3 ; DMGP4999 Dcolitloq Nn Itoi Heg

Condition: excellent (used), Year of construction: 2010, Clamping force: 3200 t Delitou N Tg Uoli Hjcg Tie bar distance: 2240x1800 mm Mould height min/max: 600-2000mm Platen size HxV: 3020x2680mm Max mould weight: 81000kg Screw dia: 215mm Injection volume: 38120 cm3 For more information contact us.

Condition: like new (used), Year of construction: 2021, Functionality: fully functional, Machine in good condition Dcolitlev H Dxloi Heg For more info please contact us

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, clamping force: 4,200 kN, screw diameter: 60 mm, injection pressure: 2.42 bar, ejector force: 95 N, ejector stroke: 250 mm, plate length: 1,230 mm, plate width: 1,270 mm, TECHNICAL DETAILS Closing force of the mold: 4,200 kN Mold opening force: 250 kN Dimensions of the clamping platen (hxv): 1,270 x 1,230 mm Distance between the standard columns (hxv): 800 x 800 mm Distance of the mold opening: max. 1,020 mm Formwork height: min. 580 mm (380 mm standard + 200 mm extended - ZE45.462) Panel opening stroke: max. 1,600 mm (1,400 mm standard + 200 mm extended - ZE45.462) Ejector stroke: 250 mm Ejection force forwards/backwards: 95 kN / 49 kN Injection unit Screw diameter: 60 mm Ratio Ls/D: 23.3 Injection pressure: 2,420 bar Injection volume: 792 cm³ Injection weight: 720 g Injection speed: 130 mm/s Injection speed: 368 cm³/s Screw speed: 285 rpm Plasticizing capacity: 72.2 g/s at standard screw speed Thrust force of the nozzle: 82 kN Pump motor power: 75 kW Dolitoul Ug Heli Hecg Installed heating power: 29 kW Number of cylinder heating zones: 6 (+1 extended nozzle ZE33.00) Drying time / stroke according to Euromap 6: 3.0 s / 560 mm Required oil volume: 1,000 dm³ MACHINE DETAILS Net weight with control cabinet: 21.5 t Machine dimensions (L x W x H): 6.90 x 2.49 x 2.38 m Maximum tool weight: 6,700 kg EQUIPMENT - Fully hydraulic clamping system - MC 5 control system with color monitor, integrated control panel and integrated platen station - Plasticizing system SP 2000 - Complete plasticizing system for thermoplastics with 60 mm screw diameter, non-return valve and open nozzle, nozzle radius 15 mm, nozzle opening 6 mm

Year of construction: 2002, Condition: excellent (used), Injection molding machine Arburg 520C 2000-675 Year of manufacture: 2002 Number of working hours : 64763 Injection parts: Screw diameter: 45 mm Injection weight: 240 g Injection pressure: 2500 bar Injection volume: 286 ccm Closure elements: Closing force: 200 t Clearance between columns: 520x520 mm Dimensions of table plates max: 685x685 mm Ejector: hydraulic Closing system: hydraulic Control: SELOGICA Accessories: Euromap Robot interface Dimensions: Weight: 6630 kg Length/Width/Height: 5.35x1.93x2.20 m Power Supply: Pump/motor: 30 kW Delitliom Sglqj Hecg Heaters: 14.9 kW Total: 44.9 kW

Condition: excellent (used), Year of construction: 2011, operating hours: 37,500 h, Functionality: fully functional, machine/vehicle number: 181517, clamping force: 4,000 kN, screw diameter: 60 mm, injection weight: 700 g, Injection machine 2K 60 mm - 35 mm, in very good condition with few hours of work. Machine in operation in Sabadell. Machine equipped with a Wittmann robot of 2014. With safety grid and 2 belts. Dcolitlievgq Hpo Hog

Year of construction: 2024, Condition: new, Demag Panel NC3 Made in Germany width-30CM height-5CM length-50CM TYPE: 6EJ5 Dcsliteqvuigoli Hjg 398-0DE14

Condition: like new (used), Year of construction: 2019, Machine 1200t in good condition For more info please contact us Dsliov H Dwbotli Hscg

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, clamping force: 6,500 kN, screw diameter: 90 mm, opening stroke: 1,800 mm, TECHNICAL DETAILS Clamping force: 6,500 kN Clearance between the columns (hxv): 1,025 mm x 930 mm Mold height: min. 450 mm Mold height: max. 950 mm Opening width: max. 1,800 mm Screw diameter: 90 mm (barrier) Injection volume: 2,480 cm³ Injection quantity: 2,254 g Rated power of the pump motor: 55 kW Heater output: 62 kW Tank capacity: 1,000 l Pneumatic cascades: 4 pieces EQUIPMENT Dcslitsul Ubwsli Hog - Engel ERC robot

Year of construction: 2000, Condition: excellent (used), Injection moulding machine Arburg 221 K 350 - 100 U Year of manufacture: 2001 Control type: Selogica Closing system: Knee TECHNICAL DATA Closing force: 350 kN Clearance between columns: 221 mm Plate dimensions: 324 mm x 250 mm Mould size: min. 150 mm - 300 mm Dcjlitsp At Rdjli Hog Maximum opening distance: 200 mm Max distance between plates: 500 mm Screw diameter: 20 mm Injection volume / Injection weight: 31 ccm / 26 grams PS Injection pressure: 2500 bar GENERAL DATA Engine: 7.5 kW Heaters: 4.5 kW Operating hours: On request Dimensions L x W x D: 2.7 m x 1.4 m x 2.2 m Weight: 1060 kg

Year of construction: 2024, Condition: new, Demag NC3 panel new never used width- 30cm height- 5cm length- 50 cm Dcjlsqvuinoitli Hjg

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, machine/vehicle number: AEFM6010, clamping force: 1,000 kN, Machine 1000t like new For more info please contact me Dcslitlov H Du Hji Hsg

Year of construction: 2007, Condition: excellent (used), Injection moulding machine TOSHIBA IS 450 GSW Year of manufacture - 2007 Parameters: Closing force : 4410 kN Screw diameter : 70 mm Injection volume: 1480 cm³ Injection weight: 1360 g Min. clamping plate height: 1230 mm Min. clamping plate width: 1230 mm Spacing between columns - 870X870 mm Ejector force: 243 kN Ejector stroke length: 1050 mm Maximum injection pressure: 178 MPa Delijm Sgr Totli Hscg Oil tank capacity - 1500 litres Machine length: 7600 mm Machine width: 2200 mm Machine height: 2100 mm Injection weight: 22000 kg

Year of construction: 2022, Condition: like new (used), New injection unit for Boy machine Silicon Screw dia: 32 mm Dcolitljn R D Erei Heg Material : Silicon Condition: new never used (new cost: 20.000€)

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: AEFLCC05, clamping force: 800 kN, MAchine in very good condition year of production 12/2022 Dcjliov H Dq Ijtli Heg For more info please contact

Condition: excellent (used), Year of construction: 2001, Battenfeld injection molding machine TM 4500/2800 Year of manufacture 2001 Control Unilog B4 There are 4 machines available the same ( 2001,2002 ) Closing system : Closing force 4500 kN Minimum mold height 425mm Maximum mold height 770mm Column spacing 800 x 800mm Dimension of mounting plates 1155 x 1195mm Mould opening stroke 760mm Injection unit Dcolitlist Ef Inj Hog Screw diameter 75mm Injection weight (ps) 1506g Injection volume 1657cm3 Specific injection pressure 1739bar Robot interface Euromap 12 Machine dimensions : 8.3 x 1.9 x 2.4 Weight : 20400 kg Oil tank capacity : 800 liters

Condition: good (used), VT 5041-21/3-OD Dcelitsu Ilmkoli Heg

Year of construction: 2002, Condition: excellent (used), Injection moulding machine Demag Ergotech 250/630 - 1450 Year of manufacture - 2002 Djliom Sg Hretli Hscg Control - NC4 Screw diameter [mm] -60 Injection size [g]: 690 Injection pressure [bar]: 1905 Short-circuit force [kN]: 2500 Column spacing [mm]: 630 x 630 Plate dimensions [mm]: 950 x 950 Min. mould height [Mm ]: 330 Bimetallic injection system Air valve on moving platen Core - 2 Euromap 12 Heated ducts

Year of construction: 2012, Condition: excellent (used), Hopper loader SAL-6U-3-CE description : 37 kg / 1 palette Djleu H U Izsitli Hjcg

Condition: good (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot Year of manufacture - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. PV - adjustment of the injection unit. Dslietrya Rstli Hscg MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment - rated power of pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71

Condition: good (used), 100 kW 470 kg, 130x80 cm on europallet, H 700 mm Loher MOTOR JNGA from injection molding machine Krauss Maffei 650 tonne Dolitju Axineli Hscg

Year of construction: 2010, Condition: excellent (used), Krauss Maffei KM 180 - 750 AX injection molding machine Fully electric machine Year of manufacture -2010 Replaced new plastification system motor MC5 control system with color monitor, integrated control panel and built-in disk station. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 50 mm TECHNICAL DATA Closing unit - Closing force of the mold: kN 1760 - Clamping plate dimensions (h x v): mm 790 x 740 - Clearance between columns (h x v): mm 560 x 510 - Mold opening path max: mm 450 - Mold installation height min/max: mm 200/600 - Plate opening stroke: mm 1050 - Ejector stroke: mm 130 - Ejector force: kN 49 Injection unit - Auger diameter: mm 50 - Ls/D ratio: 20,2 - Injection pressure: bar 1892 - Injection volume: cm3 393 - Injection weight for PS: g 357 - Injection capacity: cm3/s 314 - Screw speed, max: rpm 320 - Nozzle clamping force: kN 29,4 Electrical parameters - Connection value: kW 38 - Heater power: kW 15,6 - Number of cylinder heating zones: - 5 - Dry cycle time according to Euromap 6: 1/h 2000 Dcjlitlsn Atndoi Hsg - Dry cycle time according to Euromap 6: s 1.8 Weight and dimensions - Net weight with control cabinet: t 6.5 - Machine dimensions (L x W x H): m 6.07 x 1.92 x 2.01