Used machining centers with traverse tables for sale (184)

Condition: good (used), Edgebander Holzher Streamer 1057 Pre-milling cutters Glue application, GLUE JET cartridge system Suitable for PUR glue Codpjxzfhmjfx Afljhf Equipped with glue discharge Pneumatic pre-cut guillotine Pressure rollers Final trimming saws adjustable at an angle Top and bottom milling units R1, R2 Corner rounding unit Profile scraper Flat scraper Max edge height mm: 60 Max edge thickness in roll mm: 3 Feed speed 10m/min Comes with fluids Polishing unit

Condition: used, Year of construction: 2000, Used machine MAKA CNC Door Processing Center HC 55 TBZ Year of manufacture: 2000 CNC machining center for processing interior doors (hardware mortising, vision panel cut-outs, peephole machining, etc.) CNC control BWO 900C, with 1 MB memory, integrated PC. Working ranges: For door width: 250 – 1,280 mm For door height: max. 2,500 mm For door leaf thickness: max. 80 mm Rapid traverse speed: X / Y-axis: 45 m/min Z-axis: 10 m/min 1 universal milling unit SK40 With integrated A-axis swivel 190° (+/- 95°), along X-axis for lock/hinge machining on both sides along the longitudinal door edge directly with the unit. Water-cooled milling spindle, nominal output 8 kW, available from 7,000 rpm, continuously variable speed from 1,000 – 17,100 rpm, SK40 tool holder for automatic tool change. 1 chain-type tool magazine with 24 positions, for tools up to Ø 90 mm, for sorted storage up to max. Ø 160 mm, positioned at unit’s service position. Max. tool length 200 mm from spindle mount. Milling spindle and 2 x magazine positions equipped for angle/feeler heads with torque support. Cedev S Dn Dspfx Aflshf Machine table with width adjustment via program, as well as width measurement for edge processing for consistent milling depth on both sides. 1 set of infeed rollers for manual loading, automatically elevating and lowering. 1 longitudinal stop with pneumatic insertion stroke, mounted on the traversing unit for positioning according to door length and thickness. 4 pneumatic lateral stops, swing-in type, for doors with veneer/cover overhang up to max. 15 mm, with selectable height adjustment for varying stop heights on finished doors (single/double rebate doors). 2 vacuum clamping lines, 5 vacuum suction cups per line, 130/200 x 70 mm, with touch valve and blow-off device. Per line, 3 vacuum cups can be lowered according to the door height being processed. 1 vacuum pump, approx. 128 m³/h suction capacity, with 250-liter intermediate tank, enabling rapid vacuum build-up. Automatic central lubrication, free-standing control cabinet with air conditioner. Safety features: Bumper on both sides of the gantry, protective fencing on the sides. Various tools and tool holders can be taken over by agreement. The machine can be inspected in Hermaringen.

Condition: used, Year of construction: 2007, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 0-250-21-0442, travel distance X-axis: 3,850 mm, travel distance Y-axis: 2,015 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 3,850 mm, feed length Y-axis: 2,015 mm, feed length Z-axis: 80 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 20 m/min, Equipment: documentation/manual, Sale of a CNC machining center that is fully operational and has been completely overhauled. Homag Weeke Venture 5 Optimat BHC 550 In 2024, extensive maintenance measures were carried out. The main spindle was completely refurbished. Additionally, a new UPS and a new vacuum pump were installed. The frequency converter was also replaced. The offer also includes a Flex 5 aggregate (not required for standard operations); however, this unit is non-functional but a repair quote is available. Specification sheet for the Weeke Venture 5 Optimat BHC 550 (year of manufacture: 2007) Main technical data Dimensions & Weight Length: approx. 6,350 mm | Width: approx. 2,550 mm | Height: approx. 2,450 mm | Weight: approx. 6,500 kg • Processing Area (X, Y, Z) X-axis approx. 3,250 mm | Y-axis approx. 1,300 mm | Z approx. 150 mm • Main Spindle Power: 12 kW, liquid-cooled Tool holder: HSK-F63 Speed steplessly programmable from 1,250 to 24,000 rpm • Drilling Units & Milling o Vertical: 25 spindles (32 mm pitch), depths up to 38/55 mm, tool holder diameter 10 mm, max. drill diameter 35 mm o Horizontal: 4 spindles in X-direction, 2 in Y-direction (32 mm pitch), depths up to 38 mm, max. drill diameter 20 mm o Grooving/Sawing unit: swivels 90° in XY-direction, cutting depth up to 30 mm, up to 7,500 rpm, max. tool diameter 1 mm • Workpiece Clamping & Table o Pod and rail table or console table with 6 adjustable supports in X-direction, LED display for position o Suction cups: e.g., 12 vacuum suction cups or various tubeless versions o Vacuum pump: approx. 100 m³/h • Tool Changer & Control o Tool changer: 14 positions front (X-direction) and 8 positions rear (Y-direction) o Control: POWERCONTROL PC 85T (TFT 17″), WOODWOP 5.0 software, incl. MDE and production lists • Additional Equipment & Safety o FLEX-5 interface for sawing/milling/drilling o Tool picking function (Pick-Up), safety mats, safety fence/doors, barcode scanner, etc. Additional technical key data from supplementary sources for 2007 • Work area: X ≈ 3,250 mm · Y ≈ 1,220 mm · Z ≈ 125 mm Chodoxrcf Djpfx Aflof • Tool slots: approx. 16 positions • Vertical drilling spindles: 12 units • Horizontal drilling spindles: 4 in X, 2 in Y • Main motor: 12 kW, HSK-F63, speed up to 24,000 rpm • Other equipment: Pod-and-rail table, positioning aids, crosshair laser, LED display, HOMAG POWER CONTROL, WOODWOP 5.0 software, safety mats, handheld terminal, UPS, CE marking

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Equipment and technical data: Nesting system with grid table Processing dimensions: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Chjdswka Ipepfx Aflef Traverse paths: - X: 5665 mm - Y: 1650 mm - Z: 325 mm with milling unit 7933: - Motor 11 kW (S6) - HSK 63 - water-cooled with C-axis with 18-position disc tool changer with vacuum pump 250 m³ with handheld control device with central lubrication with minimum quantity lubrication system Availability: short-term Location: Röllbach

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis (5 axis with FLEX 5) Gantry-drive (axe X) machine Numerical Control Control Powertouch (PC85) Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 8 Table dimensions (mm) 1340 Automatic deplacement by CNC (X axis) of the Supports rails LED system (on the rails) for the vacuum pods positioning Clamps for workpieces fixing - POWERCLAMP Automatic Tools Changing System Tools storage plate (No. of folds-positions) 18 Max. useful working area (X - Y - Z) mm 4000 x mm 1550 x mm 60 Max. useful working area (X - Y - Z) in edge banding (mm) 4000 x mm 1500 x mm 60 Chedew Dc Niopfx Aflef No. 2 Working areas - Vacuum pump (capacity m3/h) 100/140 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes Total installed power (52 A) WORKING GROUPS (TOP): No. 17 Independent vertical boring spindles (High Speed 7500) No. 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,2 No. 1 Vertical electro-spindles HSK63. Vertical electro-spindles motor power (KW 15) No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 1 reels/Coils) Pre-End cutting unit Crosshead aggregate (4 horizontal drilling spindles) N° 1 Circular saw aggregate (diam. mm 125) Combined aggregate (Flush-Trimming/Scraping)

Condition: used, machine/vehicle number: 008205, Y axis working area: 1250 mm Csdpfx Aox A Th Rsflehf Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes

Condition: excellent (used), Year of construction: 2018, Used 5-axis CNC machining center including edge banding Manufacturer: HOMAG Model: PROFI BMG310/42/F/V/K Year of manufacture: 2018 Main spindle overhauled by Benz GmbH Working area X: 4200 mm (4375 mm with tool diameter 25 mm) Working area Y: 1350 mm for all units - Milling with tool diameter 25 mm: 1600 mm - PowerEdge: 1600 mm Chodow H Nzdepfx Afljf Workpiece thickness: 300 mm Equipment: - Speed Pack - 32-position disc tool changer (24+8) - 10-position disc tool changer - 8-position linear tool changer - Processing spindle 12 kW Drive5C - Spindle vibration visualization - Drilling head with 31 spindles: Vertical 21 / Horizontal 10 / 0° / 90° - Additional milling spindle 6 kW for drilling head - Blowing nozzle for workpiece edge, 60 mm - PowerEdge edge banding unit - Pre-trimming station and double roller BMG310/V - Additional roll plate for pre-trimming station KH 65 mm - Pneumatic lift for drive spindle - Saw/trimming unit for tool changer - Combination flush trimming and scraper unit - LED positioning display system - PowerClamp fixture interface for console table - Dynamic nesting management - Vacuum system 290/345 m³/h - PowerControl PC87 Powertouch - Collision control - Tool length measuring system - WoodWop component Lamello Clamex-P - Chip conveyor - SafeScan for Speed Pack BMG And much more. Complete technical data available in the attached PDF document.

Condition: as good as new (ex-display), functionality: fully functional, The Format4 creator 950 in a wide range of equipment variants - your CNC machine for individual woodworking challenges. Efficient CNC processing at a fair price - this principle is at the heart of the creator machine series. All models are attractively equipped with the latest CNC technology and can be customized to meet specific requirements. The creator 950 is not only an easy and safe entry into the CNC world, but also serves to relieve your CNC machining centers. Your advantages at a glance: Concentrated CNC technology on a footprint of just 5 m² All-inclusive: 4-sided formatting as standard Get started right away: Maximum productivity without set-up times No suction cup and console positioning Use from interior fittings to room doors Traditional processing from above - extremely simple loading Intuitive control via control panel Easy to understand software Best suction result High-end at the best price in every configuration Carcass processing with Lamello Clamex-P Additional equipment: C19 2nd stop reference cylinder for long workpieces C71 Folding support tables front+rear - roller table C198 Pick-up space for tool and unit change C200 4-fold linear changer for use of units C233 Holder for crane transport C490 F4design (incl. 3-axis PP) 800 E-Learning F4Design Creator processing field: Travel of the axis X= 1475mm (bracket) Y=1550mm Z= 225 mm Working field X= 3500 mm (infinite) or 130 kg maximum load Codju Eg A Uopfx Aflehf Y= 950 mm Z= 80 mm Machinable workpiece Equipped with: High-performance PC 24" LED color display Keyboard, mouse and mouse pad 1 USB interface

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Manufacturer: BACCI Model: EVO JET Type of machine: CNC Machining Center Year of manufacture: 2013 The EVOLUTION JET is an extremely flexible machining center, both in terms of adjustable dimensions and the number of worktables, onto which devices for manual, semi-automatic, or fully automatic loading and unloading can be installed. Ideal for simultaneous processing of all components required for assembling chairs or furniture on a single machine. Technical data: Fully digital NC axes: 12 Linearly interpolated axes: 3 + 3 or more Rotary interpolated axes: 2 + 2 Longitudinal axis (X): 3,400 mm or more Transverse axis (Y): 1,300 mm Head transverse axis (Y): 1,000 mm Vertical axis (Z): 750 mm A-axis: unlimited C-axis: +/- 180° 5-axis spindle CNC self-adjusting worktables Special material clamping system Rack gripper OSAI machine control Electrical cabinet cooling Codpfx Aoxw Nv Heflshf Independent Z-axes: 2 Number of milling spindles: 4 Maximum spindle speed (rpm): 24,000 Cantilever design 2 tables Belt feed loading External transport: roller conveyor Enclosed cabin CE marking

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 218, travel distance X-axis: 5,500 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 54 m/min, rapid traverse Z-axis: 38 m/min, controller manufacturer: OSAI, controller model: OPENkey, total height: 8,100 mm, total length: 5,100 mm, total width: 3,400 mm, spindle speed (min.): 3,000 rpm, spindle speed (max.): 24,000 rpm, spindle motor power: 7,400 W, number of spindles: 4, input voltage: 400 V, type of input current: three-phase, Equipment: CE marking, documentation/manual, We've lowered the price!!! NEW PRICE ONLY €165,000!!! This price is valid only until September 30, 2025! Don’t miss this opportunity! We invite you to purchase a BRAND NEW, top-quality 5-AXIS MACHINING CENTER from the renowned manufacturer FANUM. We are offering the brand new SIGMA model, supplied with a rich equipment package. The machine is entirely new; the attached specification describes its features, technical parameters, and production capabilities. FANUM is a well-established brand, widely recognized for reliability, precision, high power, and fast operating speeds. The MACHINING CENTER being offered is in BRAND NEW condition. It was purchased from FANUM Sp. z o.o. in 2021 and delivered directly by the manufacturer. The FANUM Sp. z o.o. service team performed the initial commissioning, but the machine has not been used since. Its condition is therefore absolutely NEW. Our model is exceptionally well-equipped, with almost all available options included. Currently, a comparable new machine would cost approximately €282,350 net (PLN 1,200,000 net). We have direct access to the manufacturer, FANUM Sp. z o.o., for technical support. Upon request, we can organize a new start-up inspection and demonstration at our location. Transportation to the new owner and installation/start-up by FANUM technicians at the destination is also possible. The offered price is for the machine itself, but we can also provide a comprehensive quotation including installation and commissioning at the new location. With a discount of more than 40% (over €117,640 net, approx. PLN 500,000 net) off the price of a new unit, this offer represents an extremely attractive value for buyers seeking to add a state-of-the-art, highly efficient machine to their facility, especially those who did not expect to acquire a modern and powerful machining center within their current budget. General information about the sales offer: • Although the machine is NEW, it was manufactured in 2021 and is sold without guarantee or warranty; • Returns are not accepted; • The price listed does not include VAT (23% for buyers in Poland), which will be added to the invoice—please verify the advertised price conditions; • Single owner. * The EUR price is based on the NBP exchange rate: 1 EUR = 4.25 PLN. Cedow E Hufopfx Aflehf Welcome to all users of the MACHINESEEKER platform. We are new to MACHINESEEKER. Please note, we are not a furniture, manufacturing, or machinery trading company. We own several properties across Poland and operate as a real estate developer, building houses and apartments in Warsaw (the capital of Poland). All machines in our offer are our own property, acquired as part of settlements with our tenants from the furniture industry. We know their history and condition, which fully corresponds with our descriptions. We maintain contact with the machine manufacturers, who can provide further technical support—Homag, Otto Martin, OMC Machinery, and FANUM. As we do not require these machines in our business, our prices are very attractive, especially since the equipment is practically unused. We offer assistance with transportation anywhere in Poland or within the EU. You are welcome to inspect the machines in person prior to purchase. Best regards.

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Equipment and technical data: Travel paths: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder: HSK 63 F - Speed: 1,000 - 18,000 rpm Tool changer: 6-position, side-mounted Drilling head: Cjdpfx Afjwka H Eolehf - 9 vertical drilling spindles, 32 mm pitch - Horizontal spindle: 1+1 - Vertical spindle: 1+1 Grooving saw in X direction Control: Twin CAM 32 Vacuum pump: 100 m³/h Includes vacuum suction cups Dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: used, machine/vehicle number: 007813, X axis working area: 3390 mm Y axis working area: 1552 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Cedpfx Afox A Thdolohf Number of controlled axes: 4 axes Total number of drilling spindles: 34 Total number of tool changer positions: 12

Year of construction: 2013, condition: excellent (used), Technical design: Console table 3050 x 1200 mm with manually movable 6 consoles , each console 2vacuum suction cups and a pneumatic lifting rail point laser set-up aid, vacuum pump Chjdpfxskqyizj Aflef CNC control XILOG Plus main spindle 8,5 kW (12 HP) HSK 63F with C-axis , 1500 - 24.000 rpm tool changer plate 12-fold 1 adapter unit swiveling saw drilling head with: 12 vertical spindles, 4+2 horizontal spindles, grooving saw bumper safety system The shown tools, HSK- tool holders, drills etc. are not included in delivery!

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: AL1/003895, travel distance X-axis: 2,949 mm, travel distance Y-axis: 1,353 mm, input voltage: 400 V, Working area: 2500 x 1240 mm Z-axis travel length: 200 mm Passage height: 180 mm Drilling unit: Drill head with 10 + 4 spindles 6 individually selectable vertical spindles in X 4 individually selectable vertical spindles in Y 2 horizontal spindles in X (1+1) 2 horizontal spindles in Y (1+1) Spindle speed: 4,000 rpm Power: 2.2 kW Pitch: 32 mm Drill holder: M10 with 11 mm mounting face Extraction port: D=160 mm Milling spindle: Tool holder: HSK 63F Spindle speed: 1,500 – 24,000 rpm, stepless via inverter Motor power: 6.6 kW (9 HP from 12,000 rpm (S1)) Right/left rotation Ceramic bearings Prepared for automatic change of angle heads Grooving saw unit: Fixed in X-direction (longitudinal) Power: 2.2 kW (3 HP) Speed: 6,000 rpm Max. saw blade diameter: 160 mm Saw blade thickness: approx. 3.2–6 mm Saw blade bore: 30 mm Extraction port: D=200 mm Worktable: 4 supports, 900 mm, stepless manual adjustment in X 12 round vacuum pods, D=110 mm, stepless adjustment in Y (2 pods per support) 2 stops in X (1x left / 1x right) 1 stop in Y per support (total 6) Additional right-side stop with roller track for extending X-axis to 3,230 mm (2 clampings) Cjdpfjxxik Hsx Aflohf Retractable reference stops are CNC-controlled Pendulum operation (2 working zones) Further technical data: Total connected load max.: 16 kW Recommended fuse: 64 A Power supply: 400 V (50 Hz) Compressed air: 7 bar System pressure: 10 bar Compressed air consumption: 150 nl/min Central extraction port with flap control: D=250 or D=300 mm Extraction speed: 30 m/sec Air consumption: 3,400 m³/h Vacuum: 3,000 Pascal Machine weight: approx. 2,700 kg Required floor space: approx. 6,400 x 2,970 mm Loading dimensions: 4,400 x 2,200 x 2,500 mm

Condition: used, Year of construction: 2007, The SHARP double-table machining center with 6 or more interpolated axes has an extremely rigid gantry frame and is particularly suitable for the production of elements for chairs, furniture, tables, beds, shells, stair components and musical instruments. • 4 motors of 9.6 kW each • Possibility of machining elements up to 145 cm wide and 200 cm long • Technically efficient machine with PITAGORA simulator and anti-collision program, AlpaCAM software and OSAI control • Year 2007, machine no. 445 Chsdpfx Aexxh Haeflef • Dimensions that are needed in the hall to set it (building dimensions) - width 3.7 m (from the operator's side) x length (depth) x 4.9 m • Equipped with: a) 4 higher tables for attaching elements / beams b) 4 lower tables for attaching elements / beams c) vacuum pump d) bars with a length of 113 cm for vacuum / for mounting pressure / positioning cylinders - 4 items

Condition: ready for operation (used), Operation in X, Y, Z axes Horizontal drills on X-axis – 10 pcs Horizontal drills on Y-axis – 2 pcs Vertical drills on Y-axis – 14 pcs Vacuum pump 3 kW Capability for dual-field operation 6 beams Milling unit 2 work zones 3000 kg Csdsx An Avspfx Aflehf Year of manufacture: 1992

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 0-201-76-6720, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 270 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BMG311 VENTURE316XXL 6m machine 10 consoles 6 stops at the rear 6 stops at the front Vacuum system 2 x 90/108 m³/h (50/60 Hz) LED position display system Cjdpfoxw H Tcsx Aflshf 5-axis main spindle 10 kW Drive5C Programming 5-axis spindle with WoodWop 18-position disc changer below Drilling head with 21 spindles: V17/H4/S0/90° Safety barrier on the left Viewing element barrier on the right VENT.+BMG+B200/300 Chip conveyor on the right PowerClamp pneumatic package for K+AP table Performance pack for Drive5C 9-position linear changer for BMG311 without FLEX5 Measuring probe for tool changer Visualization of vibrations on machining spindle collisionControl Barcode reader package VENTURE for 1D codes HOMAG GROUP control system PowerTouch WoodWop CAD plugin WoodWop CAM plugin Professional Machine WoodMotion

Condition: used, machine/vehicle number: 008169, X axis working area: 4500 mm Chjdpoxaud Isfx Aflof Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 14

Condition: used, Year of construction: 2014, Maximized productivity with two heads and two autoloaders. The exclusive design of hopperfeeders (Pade patent) allow the manual loading of the pieces without any barrier in front of the operator. The piece-holder magazine can be easily “parked” to the side to allow the manual loading of the pieces. Pneumatic clamps with locking from bottom to top that can be easily positioned on the TANDEM pods in order to quickly change the configuration from manual to automatic loading. Main features: - Working heads with the possibility of choosing between 1, 2 and 4 spindles - 2 working tables with pods, vacuum table or combined with customizable dimensions - Possibility to add single or multiple clamping systems and CNC lathe - Automatic workpiece loaders with magazine - E-LAB programming system, automatic trajectories manager Main functions: - Mortising - Drilling - Milling - Cutting Codpfexw Ty Nsx Aflshf - Tenoning

Condition: used, machine/vehicle number: 008166, X axis working area: 4250 mm Y axis working area: 1250 mm Cjdpfx Afox A Hdreljhf Working Table: Pod and Rail Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 25 Total number of tool changer positions: 14

Condition: good (used), Production line consisting of: Chjdpot Txfpjfx Afljf - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 4000mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: used, machine/vehicle number: 006351, X axis working area: 4250 mm Chjdpfswcyflex Aflof Y axis working area: 1250 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 007716, X axis working area: 3250 mm Y axis working area: 1220 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 16 Chedpswuz N Nsfx Aflof

Condition: used, machine/vehicle number: 005521, X axis working area: 4000 mm Chsdpfx Aovctlgsflsf Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 24

Condition: used, machine/vehicle number: 007350, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Codpewcyd Iofx Aflshf Total number of tool changer positions: 28