Used Machining centers with traverse tables for sale (177)

Condition: used, XNC Numerical Control Working range on X axis mm 3400 Working range on Y axis mm 1300 Working stroke in Z axis mm 155 N ° 2 work fields Bar worktop No. 8 manually adjustable bars for suction cup support with display for viewing working heights No. 8 pneumatic bakelite bars for lifting the panel No. 3 manually adjustable suction cups for each bar with vacuum seal for fixing the panel during assembly processing No. 1 vertical electrospindle with C-axis Vector, with automatic tool change, Iso 30 type cones, flange for use aggregates Automatic tool change system with 3 positions for aggregates positioned on the side Automatic tool change system with 20 positions and chain Drilling head with mandrels arranged as follows: - No. 10 verticals on X axis - No. 12 verticals in Y axis - N° 6 horizontal on X axis - No. 2 horizontals on Y axis Front protection and safety system with carpets Perimeter protection grids Motorized carpet for chip evacuation Vacuum pump Kedpfx Agsv Edgge Nodu

Condition: used, Year of construction: 2004, functionality: fully functional, spindle motor power: 6,600 W, number of slots in tool magazine: 7, 3 AXIS machine Vacuum pump 100 m3 Electrospindle 6,6 kW motor power Routing unit + Saw aggregate Drilling unit 10 +4 (10 vertical + 4 horizontal) ISO 30 router chuck Manual lubrication Monitor 15" XILOG PLUS Software Windows XP Machine is still working at Sellers, video of machine in working mode available on request Ksdpfx Agjwhvwns Njdu

Condition: good (used), Machining center HOMAG BAZ 723 58/18/FC 4-axis CNC portal machine with 2 moving tables and edge banding unit Kodpfx Agjxc Ir Re Njdu

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 0-201-25-5219, travel distance X-axis: 4,800 mm, travel distance Y-axis: 1,400 mm, input frequency: 50 Hz, Equipment: rotational speed infinitely variable, No reserve price – guaranteed sale to the highest bidder! Kdjdpfx Aew Ekkkeg Nou Bidding obligates timely collection by the end of August! TECHNICAL DETAILS Travel distances X-axis travel: 4,800 mm Y-axis travel: 1,400 mm MACHINE DETAILS Electrical data Supply voltage: 400 V Frequency: 50 Hz Number of phases: 3 Rated current: 53 A Fuse: 63 A Control voltage: 24 V Type of input current: Three-phase EQUIPMENT Continuously adjustable spindle speed Edge processing unit

Condition: used, machine/vehicle number: 006351, X axis working area: 4250 mm Y axis working area: 1250 mm Kodswcyfljpfx Ag Nsdu Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 38

Condition: reconditioned (used), Year of construction: 2010, operating hours: 24,170 h, functionality: fully functional, machine/vehicle number: 0-250-21-1078, travel distance X-axis: 3,945 mm, travel distance Y-axis: 1,953 mm, travel distance Z-axis: 150 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 3,995 mm, feed length Y-axis: 1,976 mm, feed length Z-axis: 150 mm, controller manufacturer: Beckhoff, controller model: MCC, workpiece length (max.): 3,130 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 100 mm, total height: 100 mm, total length: 3,130 mm, total width: 1,250 mm, table width: 3,130 mm, table height: 1,250 mm, table length: 3,130 mm, rotational speed (max.): 7,500 rpm, overall weight: 8,000 kg, spindle speed (min.): 1,500 rpm, spindle speed (max.): 24,000 rpm, distance between spindles: 32 mm, spindle motor power: 9 W, number of spindles: 12, number of slots in tool magazine: 16, tool length: 260 mm, tool diameter: 130 mm, tool weight: 5,000 g, input voltage: 400 V, type of input current: three-phase, number of previous owners: 1, gear speed: 7,500 rpm, milling spindle motor power: 9,000 W, spindle stroke: 60 mm, year of last overhaul: 2024, Equipment: milling spindle speed infinitely variable, rotational speed infinitely variable, We are offering a Homag Weeke Venture 08 M for sale. The machine was disassembled at the customer's premises and inspected in my workshop, and some necessary repairs were carried out. Paint damage was repaired, and the inside of the table was completely painted. It is in no way inferior to a general overhaul. I have 12 years of experience with IMA and 18 years of experience at Homag Bohrsysteme as a service technician worldwide. In 2023, the machine PC was upgraded from Windows XP to Windows 10, and Woodwop 8.0 was installed. Two additional workstation licenses are available. We are also happy to install the machine and repair your Homag Weeke IMA machines on-site. Loading, delivery, and installation are available at cost or at a fixed price. The warranty is only partially valid for mechanical components. Electrical/electromechanical components are excluded. We also offer annual maintenance. We also offer reconditioned tool change adapter units in like-new condition. Saws/lock cases/corner notchers/tracing milling units/pivoting saws/units available upon request. General overhauls of drilling gears and milling spindles available upon request and quotation. Machine relocations and complete overhauls. Please contact us if you are interested in discussing the details. Kjdsvfql Nspfx Ag Nodu

Condition: used, Power Control Numerical Control with Wood Wop Software Working range on X axis mm 3130 Working range on Y axis mm 1250 Working range on Z axis 100 mm N ° 2 work fields Bar worktop No. 6 manually adjustable bars for suction cup support No. 3 pneumatic Bakelite bars for lifting the panel No. 2 manually adjustable suction cups for each bar with vacuum seal for fixing the panel during the processing No. 1 Vektor vertical electrospindle with C-axis, with automatic tool change No. 1 automatic tool change system with no. 8 + 1 lateral positions No. 1 automatic tool change system with 12 rear positions Drilling head with 18 spindles arranged as follows: - N° 6 verticals on X axis - N° 6 verticals in Y axis - N° 4 horizontal on X axis - No. 2 horizontals on Y axis Integrated blade for making grooves Front protection and safety system with carpets Vacuum pump mc/h 100 No. 1 double outlet horizontal aggregate included TECHNICAL DETAILS TO BE CHECKED Kedpfx Aewzlg Esg Njdu

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 08070013, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,785 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 20 m/min, number of slots in tool magazine: 12, TECHNICAL DETAILS X-axis: 4000 mm Y-axis: 1785 mm Z-axis: 280 mm Kdodov Aiibopfx Ag Nou Rapid traverse X / Y / Z: 60 / 50 / 20 m/min Tool holder: HSK-F63 Tool changer: 12 stations Drilling units: 4x horizontal, 11x vertical Control software: Masterwood MW310 MACHINE DETAILS Transport dimensions (LxWxH): 9,600 x 2,450 x 2,450 mm Total weight: 3,500 kg Power supply: 400V Connection power: 37.1 kVA Required extraction power: 6,500 m³/h EQUIPMENT - Vacuum pump Becker Picchio 2200 included (capacity: 90/108 m³/h) - Saw unit included - Original vacuum cleaner included Robot not included

Condition: like new (used), Year of construction: 2020, operating hours: 335 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 250 mm, Equipment: USB port, Fully equipped machine, only 335 hours extra tool holder running with frame largest drill head with spindles discharge belt laser pneumatic pistons on the beam Kjdpjwinkpefx Ag Nodu automatic lubrication

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 14-1332-015/23270, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 20 m/min, nominal power (apparent): 28 kVA, controller manufacturer: OSAI, controller model: OPEN, total height: 3,000 mm, total length: 5,400 mm, total width: 3,200 mm, overall weight: 4,100 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 12,000 W, number of spindles: 1, number of slots in tool magazine: 14, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Purchased new in 2024 – minimal use, excellent condition Ready to use immediately – fully operational, well-maintained Original purchase price: over €85,000 lkjhiuhgftflkji can operate ksjf Machine Specifications: Type: 3-axis Gantry CNC (Pod and Rail design) with 2 working zones Working table dimensions: 3200 mm (X) x 1300 mm (Y) x 300 mm (Z) Axis speeds: 100 / 100 / 20 m/min Tool changer: 14 places with HSK-63F collet chucks Spindle: HSD 12 kW, air-cooled Boring head: HSD BHZ17 (6 vertical + 4 vertical / 4 horizontal + 2 horizontal / 1 blade) Controller: OSAI Open Smart Kedpfxowlaxqe Ag Njdu Vacuum system: Becker KVT3100 pump (100 m³/h, purchased 2023) Key Components: Yaskawa motors, Gudel linear guides, Festo pneumatics, Schmalz vacuum components, HSD, OSAI Installation Support: While I am not able to provide transport services, I can offer support for installation and commissioning of the machine. Assistance can be provided either remotely or on-site (depending on location), to ensure proper setup and smooth operation from the start. Reason for Selling: Downgrade due to family reasons Pricing and VAT: Asking price: €52,900 (net, VAT not applicable) – seller is not VAT registered. VAT-registered buyers can apply reverse charge. klkkklsdfg dsfsdf

Condition: used, machine/vehicle number: 005521, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Kjdjvctlgopfx Ag Nsdu Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 24

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,730 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 24,000 rpm, Equipment: documentation/manual, Main spindle is equipped with C-axis and extension for Flex-5 unit! TECHNICAL DETAILS Machining Area X-axis machining area: 6,000 mm Y-axis machining area: 1,730/1,600 mm Z-axis machining area: 300 mm (80 mm with standard vacuum suction cup) Y-depth of machining: 1,450 mm (1,525 mm at the front stops) Clamping System Number of consoles: 11 pcs. Quick-Move system: automatic console positioning in X-direction Pneumatic clamping elements: 11 pcs., 3-stage, clamping range 15–120 mm Clamping aids: 11 pcs., pneumatically lowerable Vacuum Supply Vacuum pumps: 2 pcs., 66/100 m³/h Spindle and Drive Main spindle power: 15 kW Kdsdow Emdgjpfx Ag Nou Speed range: 1,500–24,000 rpm Tool holder: HSK 63 Tool changer: 30-position disc-type changer, traveling with X-support Drill Head Drill head: 12 spindles, V12/H4 Drilling spindles in X-direction: 6 Drilling spindles in Y-direction: 7 C-axis Extension Designation: C-axis extension for Flex-5 unit Purpose: for automatic changing of the Flex-5 unit Compatibility: in combination with PC85 Control Control: powerControl PC85 with WoodWop 6.0 EQUIPMENT Saw unit diameter: 200 mm Cross head: 4-spindle (drilling, milling) Lock case aggregate: 2-spindle WoodWop window/entrance door software 17-inch TFT screen Chip conveyor belt Documentation and control texts

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Kjdpfx Agjugpwne Nodu Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Year of construction: 1994, condition: used, - More information: on request Kedpfxjnzh Uxe Ag Nodu

Condition: good (used), Year of construction: 2002, Working range X 6,170 mm Working range Y 1,380 mm Working range Z 155 mm Main motor Kw7.5 kW Max rotation speed 24,000 rpm Aggregate heads 4. axis C-axis tool change positions 10 vertex boring heads 20 Horizontal boring heads X 6 Horizontal boring heads Y 2 Arm structure Work surface Console table Kedpfor E A U Iox Ag Nsdu Number of bars 10 Positioning aid Vacuum pump capacity 2 x 125m³/h Chip conveyor belt

Year of construction: 2023, condition: new, machine/vehicle number: MR005063, Maximum technology with limited space requirements. Four-axis CNC machine with bumper protection, to be used for panel machining and solid wood. Machine with industrial designed frame, heavy duty, maximum precision on operations. Equipped with Easy2Go modern interface.Machine is equipped with the following options: - Machine conforming to CE regulations Kedpsqw U D Refx Ag Nsdu - Automatic lubrication system - Suction hood main motor 3-position adjustable - Tool length control Technical specifications: - Maximum panel thickness : 180 mm - Maximum panel length : 3115 mm - Maximum panel width : 1320 mm - Machine table : Beams with vacuum cups - Safety system : Bumper protection - Number of drilling spindles vertical : 12 piece - Number of horizontal drilling spindles (over Y-axis) : 2 piece - Number of horizontal drilling spindles (over X-axis) : 4 piece - Power milling motor : 13 hp - Milling spindle change : HSK63F - Tool changer positions : 11 piece - Milling spindle speed : 24000 /min - Tool length measuring system : Yes - Serial number : AH00006001

Condition: used, machine/vehicle number: 007716, X axis working area: 3250 mm Kdodpfx Aewuz N Nsg Nju Y axis working area: 1220 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 16

Condition: good (used), Year of construction: 2006, 3 XYZ axes Kedpfxow Iluhs Ag Nedu beam table with suction cups fencing included in the set sold without tools

Condition: used, Year of construction: 2019, Numerical control with bSolid software The multi-document software application in Windows environment allows the design of the finished product, the definition of its processes, the definition of the work plan, the simulation of the piece machining operations on the 3D model of the machine and generation of the necessary machine programs. bSolid - 3-Axis Machining bSolid - 5-Axis Machining Module for surface machining with 5-axis units and interpolation movements on all 5 available axes (X,Y,Z,C,B). The module includes the following commands: · assignment to surfaces three-dimensional roughing and finishing operations · spread or project a path onto a curved surface machining lying on a plane · follow 2D or 3D curves with any type of tool bSolid - 3D Engraving bSolid - Import external formats Fields of work: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable piece in Y: * 1650 mm, with thickness up to 60 mm on H=74 mm modules * 1600 mm, with thickness over 60 mm on H=74 mm modules. 10 ATS floors – 40 trolleys The code includes: • 2 aluminium bars (n. 1 left and n. 1 right) on which the lateral stops slide. • 10 aluminum worktops. The worktops slide on hardened and ground linear guides using recirculating ball bearing slides. Locking occurs on both linear guides, front and rear, by means of four pneumatic cylinders. The control is activated by a button located in front of the work surface. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system divided into 2 locking zones in X Automatic positioning (EPS) for worktops. "EPS" (Electronic Positioning System) device for the automatic positioning by NC of the work surfaces and trolleys complete with locking devices capable of eliminate possible operator errors. Rear row stop, with 140 mm stroke Intermediate row stop, positioned at 405 mm, with 140 mm stroke. Front row stop, positioned at 1460 mm, with 140 mm stroke 4 lateral stops, with 140 mm stroke (2 right + 2 left) with system 2 additional side stops, with 140 mm stroke (1 right + 1 left). Sensor for checking whether the stops have descended 12 clamping devices for clamping narrow workpieces 6 loading aid bar lifts, for H=74 mm modules Configuration 5A, for Rover B. Configuration for high productivity and flexibility, thanks to the two operating groups 4 and 5 axes and the possibility of performing tool changes in concurrent time. It includes the axes and carriages for the movement of the main operating groups. Includes 2 inverters. Second Y-axis. Introduces the separation of the front and rear Y-carriages, with independent motorization. The two Y-carts have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 connection, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 service. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 service. • Bearings ceramics. • Right and left rotation. • Rotation speed from 1,000 to 24,000 rpm programmable by NC. • The release pneumatic operation is carried out via a prismatic linear guide and recirculating ball bearings. A cover is included for chip extraction, with 6 different positions in Z managed by the NC, depending on the length of the tool, or by program. The suction mouth is automatically closed when the electrospindle is not working. Provision for subsequent installation of the 360° operating group (C-axis) Revolver tool maga... Kdedpfxow D E A Eo Ag Neu

Condition: good (used), Year of construction: 2008, functionality: fully functional, 4-axis machining center Homag Optimat BOF 311 venture 15 XXL New spindle Machine in excellent condition Can be inspected in department 14 Kdedpfx Agjw A R D Es Neu Dismantling, loading and transport at buyer's expense

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 4-Axis Machining Center IMA BIMA 300 Year of Production: 2009 Technical Condition: Very good Technical Data: * Work Table: 4,300 × 1,250 mm * Supports and Suction Cups: 8 supports, total 24 suction cups * Main Spindle: 7.5 kW (max 11 kW), 1,500–18,000 rpm, HSK-F63 holder, cone diameter 38 mm * Tool Magazine: 18 positions, max tool weight 6 kg, max length 150 mm, tool diameter up to 100 mm (150 mm if adjacent slots are free) * Drilling Unit: IMA 14, 14 vertical spindles, 6 horizontal spindles, grooving saw Ø150 mm, 4,500–6,000 rpm, max drill diameter 35 mm * Tool Set: shank cutter Ø18×43/Ø25/110 mm, grooving saw Ø125/Ø30×4/12Z, drills Ø5–10 mm, HSK-F63 tool holder, tool basket * Vacuum Pumps: 2 × 90 m³/h * Protective Mats: operation in alternating mode, front access * Software: IMAWOP installed on the machine + 1 office license * Emergency Power Supply (UPS): computer power backup approx. 10 minutes * Control Cabinet Air Conditioner: ensures trouble-free operation above 35 °C * Main Spindle Horizontal Unit: cross head with 4 spindles, tool diameter 1–16 mm, speed up to 15,000 rpm Kdjdpfx Ajw R S Dnjg Neu * Maximum Feed Rates: X 60 m/min, Y 60 m/min, Z 30 m/min * Dust Extraction: central port Ø250 mm, air speed 28 m/s, according to connection diagram * Weight: approx. 5,500 kg * Compressed Air: connection ¾", pressure 6 bar, dry operation recommended with air dryer * Electrical Installation: main switch in a separate control cabinet; complete control cabinet with monitoring; all safety devices CE-compliant; typical cabinet dimensions: H 2,000 × W 1,200 × D 800 mm; power supply 400/230 V, 50 Hz * Working Environment: permissible ambient temperature +15…+35 °C (without cabinet air conditioner) CNC Control: * System: ICOS OPEN 321 (Polish language version) * Interpolation: simultaneous linear interpolation for 3 axes, 2½D circular interpolation on any two axes * Selected IMAWOP Functions: * Operation selection: drilling, milling, grooves * Graphic updates after corrections * Drilling time optimization * Graphical positioning of suction cups * Conditional and formula-based programming * Technological and tool databases * Alphanumeric names/descriptions up to 28 characters * Subprograms, manual input of machining sequences * Error/alert messages * Acceleration/deceleration control (accuracy 0.001 mm) * Automatic zeroing * Corrections from portable console Additional: IMAWOP machining program

Condition: used, functionality: fully functional, HSK F63 chuck for HOMAG / Weeke machines Max. speed 12,000 rpm Saw blade bore 30 mm 4 auxiliary holes for saw blade screw connection Gear ratio 1:1 Kdsdewld Sbopfx Ag Neu Drill bit chuck shank diameter 10 mm

Condition: excellent (used), Year of construction: 2011, 5-axis gantry machining center for the production of components for chairs, tables, doors, etc. from wood and MDF Max. useful working area (X-Y-Z) mm: 3550 x 1800 x 750 Spindle power: 2 x 7.5 KW Spindle speed: 2000 - 18000 rpm Equipment: Frame 2 x movable loading tables 4-spindle head 2 x loading magazines Numerical controller Electrical cabinet Kdsdpfxsxau Uyo Ag Nsu Control panel Protective cabin

Condition: used, Year of construction: 2015, working area: 6000 x 1550 mm, z = 400 mm on 100 mm vacuum cup vector speed: 85 m/min x-axis: 35 m/min y-axis: 80 m/min z-axis: 25 m/min 1 piece – tool delivery position for bmg300/500/600 auxiliary device for automatic loading of the tool changer 1 piece – disc tool changer, 18 positions, d = 130 lower for tools and aggregates with hskf63 Kjdpowt N H Hefx Ag Nedu 1 piece – machining spindle 15 kw drive 5+ double-sided mounted 5-axis head for milling, drilling, and sawing at any angle to the workpiece 1 piece – drilling head with 21 spindles: v17 / h4 / s0/90° 1 motor, 2.2 kw, frequency controlled maximum speed: 7500 rpm, selectable via program for fast machining even with small diameters 1 piece – manual console table with led position display system console 1300–1850 mm 1 time – powercontrol pc86 powertouch modern control system based on windows pc hardware: control unit with 21.5" full hd avaiable fra aprox week 44/2025

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) with 5 axis (X-Y-Z-C-5th) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (IMAWOP) Max useful working area (without edge banding) mm 4000 x 1600 (2000) x 100 (axe Z stroke mm 650) Max useful working area (edge banding process) mm 4000 x 1600 x 100 (panel thickness) No. 8 movable rails (supports) length mm 1400, LED displaying both the axe X and axe Y position Vacuum cups (with No. 2 vacuum pumps, capacity 140 m3/h each) Kjdew A Ruqepfx Ag Njdu Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process No. 1 Vertical Electro-spindle ROBOTKOPF HSK F63 (Kw 16) Automatic Tools Changing System, with 18 folds (places) No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 8 Independent horizontal boring spindles (4 in X + 4 in Y) Circular Saw (tiltable 0°- 90°) diam. (mm) 200 Glueing Unit (P.U.R. Glue + Quick Melt unit 283.203) VT 100 / 100 WITH 45° INCLINED EDGE BANDING UNIT Edge coils supporting unit (No. 2 reels) OPTIONALS: No. 1 Aggregate Flush Milling / Trimming No. 1 Aggregate Flush-Trimming / Profile Scraping Unit