Used multi blade saws for sale (198)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1500x1580 mm Weight 2300 kg Iajdpfxsvz Hwyj Abvsp Total power requirement 40 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1930x1580x1580 mm Iaodpevz Hw Tjfx Abvsp Weight 2250 kg Total power requirement 32,57 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1800x1250 mm Weight 1700 kg Iasdjvz Hrkopfx Abvep Total power requirement 23,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2100x1900x1980 mm Weight 3500 kg Total power requirement 77,2 kw Iaodpfx Asvz Hwmsbvop

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3225x1750x1200 mm Weight 1200 kg Isdpfx Ajvz Ezkobvoap Total power requirement 16,75 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2300x1800x1400 mm Iedpjvz Hrwsfx Abvsap Weight 2500 kg Total power requirement 37 kw

Condition: good (used), Year of construction: 1993, COSMEC SM 400 multi-saw - after the technical review - very good condition - Italian production - year of production 1993 TECHNICAL PARAMETERS: cutting width 400 mm cutting height 160 mm engine power 37 kW smoothly adjustable feed speed spindle diameter 55 mm sleeve diameter 70 mm four rows of anti-recoil pawls the three upper pressure rollers table width 710 mm minimum element length 700 mm shaft height adjustment guide ruler Iaodpfx Abegyz Rvsvep laser central lubrication spigot diameter 200 mm dimensions of the machine (length / width / height) 220/190/180 cm weight 1800 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, saw blade diameter: 360 mm, Raimann ProfiRip KM310 Multi-blade Saw Isdpfsx E Ug Aex Abveap Track width: 330 mm Maximum saw blade spacing: 310 mm Cutting height: 120 mm Sleeve diameter: 80 mm Passage width: up to 650 mm Feed speed: up to 35 m/min Electrically adjustable saw shaft height Saw blade size: 280-360 mm Quickfix rapid-change system Motor power: 30 kW CE certificate Year of manufacture: 2007

Condition: used, WD Edger: - Motor power 55 kW - Two movable sleeves - Sleeve length 60 mm Isdpfxoxuipbo Abveap - Max saw blade diameter 400 mm - Hydraulic saw blade spacing - Four lower feed rollers - Two upper feed rollers Centering roller table: - Total length 7000 mm - Total width 160 mm - Five lower feed rollers - Roller diameter 160 mm - Length 1000 mm - Four upper hydraulic hold-downs - Six centering material clamps - Hydraulic feed

Condition: good (used), Year of construction: 2000, Multiblade tracked SCM M3 4 - Italian production Iaodpfx Aeg Tdfdsbvop - year of production 2000 - DTR TECHNICAL SPECIFICATIONS: track width 300 mm cutting height 120 mm engine power 25 kW max. blade diameter 350 mm max. workpiece width 1000 mm min. workpiece length 400 mm adjustable feed on the inverter pneumatically adjustable ruler on the right revolver ruler setting of 6 types three rows of anti-recoil pawls possibility of putting on a board - a shoe spindle diameter 50 mm sleeve diameter 70 mm sleeve equipped with spacers automatic central lubrication four upper pressure shafts spigot diameter 180 mm and 120 mm dimensions of the machine (length / width / height) 210/175/160 cm weight 1800 kg

Condition: used, Year of construction: 2002, machine/vehicle number: 3398, functionality: fully functional, input voltage: 380 V, shaft diameter: 70 mm, Equipment: rotational speed infinitely variable, SECOND-HAND 2 SHAFTS MULTIRIP SAW COSMEC MOD SMB200 - Max. Cutting height mm. 200 - Belt width mm. 400 - Adjustable feeding speed m/min 5/30 - Main motor KW 45 x 2 - Shaft diam. mm. 70 - CE rules Iodox Rvblepfx Abvsap - Year 2002

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, cutting height (max.): 160 mm, cutting width (max.): 450 mm, saw blade diameter: 450 mm, working width: 870 mm, track width: 450 mm, chain width: 450 mm, disc diameter: 450 mm, – very good condition – manufactured in the Czech Republic – year of manufacture: 1998 TECHNICAL SPECIFICATIONS: – track width: 450 mm – cutting height: 160 mm – max. blade diameter: 450 mm – main motor power: 45 kW Iajdpfoxtabxox Abvop – min. cutting length: 800 mm – max. input material width: 870 mm – shaft diameter: 65 mm – sleeve diameter: 80 mm – feed adjustable via frequency inverter – feed speed range: 4-40 m/min – three rows of anti-kickback pawls – connection spigot diameter: 300 mm – dimensions (L/W/H): 240 x 210 x 200 cm – weight: 3300 kg

Condition: used, Year of construction: 2015, functionality: fully functional, SECOND-HAND MULTI RIPS SAW CML MOD. SCAJ350RT - CE RULES - N. 2 mobile blades - Kw 37 Ijdsx Run Ropfx Abvsap - Year 2015

Condition: reconditioned (used), Year of construction: 1970, torwegge multi-saw after major repair two lasers, chain after regeneration, bearings, electrics, ready to work. Iaodpfou U Dmasx Abvsp

Condition: new, Year of construction: 2026, I am selling this industrial heavy-duty rip saw RS-ES-800 KUSING. The machine is in stock in Kežmarok (Slovakia). It is an industrial heavy-duty rip saw intended for processing soft and hard lumber of larger cross-sections with multiple blades. Technical parameters • Number of blades: up to 15pcs (+ 3pcs on the movable unit) • Motor power: 37 kW (standard), adjustable according to requirements • Machine weight: 3 500 kg • Pressure roller lift: Electric, controlled from external panel • Blade positioning: Electric, via computer • Number of feed rollers: 6 + 3 (upper and lower) • Front traction roller: Positioned in front of the wedges for rapid ripping • Extraction system: Upper and lower dust extraction for maximum cleanliness • Material width: 800 mm Multi-blade solution: - Possibility to install up to 15 blades + 3 movable blades. - Movable unit with a separate space for 3 blades, each 110 mm in length. Power: - Standard motor 37 kW (adjustable according to customer requirements). - Feed motor power 1.5 kW. Material feed: - A total of 9 feed rollers (6 + 3) ensures even advance and prevents torsion of the lumber during cutting. - Front traction roller placed in front of the wedges minimizes kickback and significantly facilitates feeding of boards or tall timbers. Electric control: - The lift of the pressure rollers and blade positioning are performed electronically via an external control panel, which increases the speed of setup during line ripping. Perfect dust extraction: - Integrated extraction systems in both upper and lower parts of the machine ensure maximum cleanliness of the workspace. Easy maintenance: - Special construction allows the top cover to be folded up, so maintenance and cleaning of the machine are quick and hassle-free. The specialty of this machine is the front traction roller, which is placed in front of the wedges against kickback—this speeds up feeding boards into the machine and especially helps when feeding tall timbers, as it is not necessary to overcome the resistance of the wedges and the machine pulls the material in by itself. Thanks to the three traction rollers, it is ensured that the material does not tend to twist during the cutting process, thereby increasing the quality of the cut. Ijdsx Uty Tepfx Abvoap The machine has excellent dust extraction from both the upper and lower parts, which ensures maximum cleanliness of the machine. The machine is specially constructed to be as easy as possible to maintain and clean. The top cover folds open and allows the operator to easily clean the machine.

Condition: new, Year of construction: 2026, I am selling a KUSING RP-OP-600 PRO rip saw. This is a top-of-the-line rip saw with one or two simultaneously digitally adjustable saw blades. The control has a memory with 5 values for faster and more precise work on the machine. The machine has both upper and lower traction using six steel traction rollers to ensure maximum traction even when processing thicker materials and prisms up to a maximum height of 105 to 130mm. The machine can be equipped with any number of blades with a clamping system using sliding housings for quick change of dimensions. Technical parameters: Input width: 700 (up to 900mm) Feeding roller length: 600mm Number of pulling rollers: 6x Maximum cutting size: 550mm (700mm) Main motor power: 11 / 15 / 18 kW Max. Disc diameter: 350mm Maximum cutting height: 105 mm (130 mm) Shaft diameter: 50mm Shaft length: 600mm Iajdpjx Utyyefx Abvjp The machine meets all safety requirements for CE standards. The machine is made in Slovakia. Possibility of configuring the machine according to requirements, whether it is the number of lasers, selection of input and output roller paths, etc.

Condition: new, Year of construction: 2026, I am selling this excellent helper in a carpentry workshop or a smaller sawmill for preparing plastered lumber and producing boards. This is a double-blade edge saw / Rip saw KUSING OP-400 ECO. Motor power: 2x 4kW Maximum cutting height: 55mm Feed speed: 4-18 m/min Maximum material width: 600mm Maximum width between blades: 400mm The machine's primary purpose is as a complementary machine to smaller band saws. The machine rapidly speeds up the process of producing boards, saving time in their production. With a special option, it is possible to adjust and extend individual shafts by 55 to 105mm, thanks to which you can place up to 4 blades in the machine at once. Motor 55 KW. Isdpfxex Utv Ie Abvjap Total weight approx. 4000kg. Blades and adjusting rings included. KUSING OP-400 ECO Double-Blade Rip Saw Are you looking to speed up board production in your carpentry workshop or smaller sawmill? The KUSING OP-400 ECO is the perfect partner for preparing planed lumber and turning logs into boards quickly and efficiently. _____ Why Choose the OP-400 ECO? • High Productivity: Dual 4 kW motors ensure consistent cutting power, allowing you to process lumber faster than with a single-blade setup. • Versatile Cutting Capacity: o Max. Cutting Height: 55 mm o Max. Material Width: 600 mm o Max. Distance Between Blades: 400 mm • Efficient Feed System: Adjustable feed speed from 4 to 18 m/min gives you precise control over material flow for different wood densities and board thicknesses. • Expandable Blade Configuration: With the optional shaft-extension kit, you can extend each shaft from 55 mm up to 105 mm, accommodating up to four saw blades simultaneously. This means you can rip multiple boards in a single pass, dramatically reducing setup times. • Ideal Secondary Machine: Designed as a complement to smaller bandsaws—speed up your workflow by rough-cutting logs into boards before final dimensioning. Technical Specifications • Motors: 2 × 4 kW • Maximum Cutting Height: 55 mm • Feed Speed Range: 4 – 18 m/min • Maximum Material Width: 600 mm • Max. Blade Gap (between blades): 400 mm • Shaft Extension (optional): 55 – 105 mm (fits up to four blades) The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: used, Year of construction: 2006, functionality: fully functional, cutting height (max.): 170 mm, cutting width (max.): 450 mm, saw blade diameter: 450 mm, – Year of manufacture: 2006 – Original paint TECHNICAL SPECIFICATIONS: – Main motor: 30 kW – Feed motor: 1.5 kW – Cutting height: 170 mm – Cutting width: 450 mm – Max. blade diameter: 450 mm – Two upper pressure rollers – Two lower feed rollers – Spindle diameter: 70 mm – Feed speed adjustable via gear motor – Three rollers before and after the saw Iaedpfx Absxqlu Eevsp – Roller length: 64 cm – Dimensions (L/W/H): 280 x 140 x 160 cm – Weight: 1100 kg

Condition: good (used), Year of construction: 2010, RAIMANN Econorip 310 multi-saw - German production - CE marking - Quickfix disc sliding system - year of production 2010 TECHNICAL PARAMETERS: - cutting height 110 mm - cutting width 340 mm - engine power 22 kW - adjustable feed on the inverter - electric shaft height adjustment - electric adjustment of the pressure height - spindle in the Quickfix system (the possibility of changing the dimensions without the need for tools) - track diameter max 350 mm - spindle diameter 65 mm - sleeve diameter 80 mm - four upper pressure rollers - four rows of anti-jet pawls Isdpfx Aeh Tm Alobveap - boot for short elements - max width of the element 700mm - minimum element length 300 mm - central lubrication - diameter of the stub pipe 250 mm - ruler Machine dimensions: 190x185x165 cm weight 1800 kg

Condition: used, functionality: fully functional, type of input current: three-phase, cutting height (max.): 170 mm, cutting width (max.): 380 mm, working height: 170 mm, – Italian manufacture TECHNICAL SPECIFICATIONS: – cutting width: 380 mm – cutting height: 170 mm – motors: 2 x 55 kW – feed motor: 3 kW – height adjustment motor: 1.1 kW – max. blade diameter: 350 mm – spindle diameter: 2 x 60 mm – sleeve diameter: 2 x 80 mm – track width: 350 mm – total power: 114.1 kW – feed speed adjustment via frequency inverter – automatic central lubrication – minimum workpiece length: 800 mm – electric height adjustment – shaft height adjustment – six top pressure rollers – pneumatic hold-downs – five anti-kickback devices – powered lower outfeed roller – connector diameter: 2 x 200 mm – spindle speed: 4500 RPM – machine dimensions (L/W/H): 300 / 220 / 190 cm – weight: approx. 5000 kg Isdpfxjw H R R Hs Abvsap

Condition: used, Year of construction: 2013, functionality: fully functional, – CE certificate – Year of manufacture: 2013 TECHNICAL SPECIFICATIONS: – Max. blade diameter: Ø 380 mm – Min. blade diameter: Ø 200 mm – Track width: 300 mm – Max. workpiece width: 750 mm – Cutting height: 10-120 mm – Set for short workpieces INCLUDED for FREE!!! – Spindle diameter: Ø 55 mm – Sleeve diameter: Ø 70 mm – Min. workpiece length: 600 mm – Working table height: 740 mm – Main spindle speed: 4000 rpm – Air requirement for extraction: 3800 m³/h – Extraction air velocity: 25-35 m/s – Extraction outlet: 2 x Ø 150 mm – Table dimensions: 1760×770 mm – Number of revolutions: 4000 rpm – Variable feed speed via inverter: 4-30 m/min – Electric cutting height adjustment Iasdpfjw H R N Nox Abvep – Feed motor power: 2.2 kW – Total power: 39 kW – Digital feed speed display – Automatic lubricating system with adjustable settings – Automatic star-delta starter – Overall dimensions (L/W/H): 1900 x 1600 x 1750 mm – Weight: 2600 kg

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, cutting height (max.): 80 mm, saw blade diameter: 280 mm, overall weight: 1,500 kg, Powerful lamella saw from Swedish production. Equipped with a 30 kW motor. Additional saw blades and spacer rings are included in the scope of delivery. Very good condition, beam width 200 mm. Transport across Europe can be organized at a good price. Iajdpfxsxg N Emj Abvop

Year of construction: 1996, condition: reconditioned (used), after a major renovation, new electrics – Czech production TECHNICAL PARAMETERS: cutting width 240 mm cutting height 105 mm disc diameter 350 mm main engine 22 kW feed motor 1.5 kW smooth adjustment of the feed speed electric roller height adjustment electric shaft height adjustment three rows of pawls two upper pressure rollers shaft diameter 50 mm sleeve diameter 70 mm machine dimensions (length/width/height) 150 / 165 / 160 cm Iajdpfx Asmcb Rtobvep weight ~ 2000 kg

Condition: excellent (used), Year of construction: 2009, Multi chain saw in good condition ready to work .Cutting height 120 mm .Net price fv. Iodpst Nc Rzofx Abvjap

Condition: new, Year of construction: 2025, The multi-blade or double arbor circular saw SQUALO 420 is a technologically advanced, easy-to-use, precise, and highly reliable machine. It is essential in a modern sawmill for optimizing the production of sawn timber. Iaedex Urucopfx Abvep Ideal for the production of battens, squares, sawn timber, profiles, trimmed boards, prisms, slats, and pallet components. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE