Used Material testing for sale (493)

Condition: excellent (used), Eliog Here we offer you a chamber air circulation furnace. Usable space dimensions : height mm 900 / width mm 600 / depth mm 600 324 liters Outer dimensions : height mm 1775 / width mm 900 / depth mm 953 Door leaf 1 Connected load: 3X400V 50 Hz 13 kVA Heating power: 12 kW Nominal temperature: 300°C weight: 400 kg Type: KU 300/09-06/2 K1051071 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Dcsbeifkiis Hdrdqog Further questions we can answer on the phone for you.

Year of construction: 2011, Condition: excellent (used), Here we offer you CTS temperature test chamber. Control-32 bit controller Deb Heihb Amodrdqjcg LCD control panel Digital display of set and actual values Numerical input of the setpoints Error messages in plain text Interface RS 232 Free switching channels for on-site test material control Temperature tests: temperature range -30°C to +80°C temperature deviation ±0,3 K temporally Temperature change rate heating 2 K/min Cooling 1.5 K/min to -10°C Heat radiation approx. 1000 W at +20°C approx. 200 W at -25°C Data for gas supply: Temperature range: -25°C to +55°C Temperature deviation: ±0.25 K to the test space Temperature change rate measured on average at a gas flow of 10 Nm³/h: at least as fast as the test chamber Data for the gas return: Temperature range: +18°C to +30°C Temperature deviation: ±0.25 K to the test chamber Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with the large purge volume N2 until the oxygen content is less than 3%. After that, the system switches to a base load (approx. 10% of the large flush volume). is switched over. The nitrogen flow rate of the base load is measured with a flow meter, displayed and monitored by a limit switch. and monitored by means of a limit switch. The O2 monitoring system continuously extracts from the test chamber via a flashback arrestor gas from the test chamber via a flame arrester and passes it over an O2 sensor that monitors the residual oxygen content of the extracted air. The gas is then returned to the test chamber via a second flashback arrestor. test chamber. The exhaust pump is monitored by a volumetric flow meter. Further details can be found can be found in the Dräger operating instructions in the appendix. The gas device is currently out of service! The technical data refer to an ambient temperature of +25 °C, Nominal voltage 400V , without test material, without irradiation and without additional equipment. Dimensions: Test volume 950 liters Test chamber dimensions height approx. 700 mm / width approx. 900 mm depth approx. 1500 mm External dimensions height approx. 2400 mm / width approx. 1270 mm depth approx. 3125 mm Operating data: Electrical connection 400V+6/-10 %, 3/N,50 Hz rated power 21,6 kW rated current: 36,5 A Protection class IP 54 condensate drain pressureless R 1/2" female thread Sound pressure level < 62 dB(A) (according to DIN EN ISO 3744 measured at 1m distance from front) weight: approx. 1500 kg, control cabinet approx. 300 kg external refrigeration unit refrigerant R404A / R23 Type: T-30/950 Ex/I For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), RMS vibration exciter with power amplifier and cooling fan Here we offer you a RMS vibration exciter with power amplifier. Vibration exciter SW 1507 Max force 2158 N max. speed 1,3 ms Power amplifier TGA 1500 3 x 380V/ 50Hz/ 35A / 8 kVA Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Dcob Hdrjgkaibjdqeg Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), Vötsch climatic test chamber Here we offer a Vötsch climate test chamber. Designation VC³ 4100 Air-cooled With temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x width 1100 mm x depth 950 mm Device dimensions: Height 2000 mm x width 1300 mm x depth 1916 mm Volume: 990 liters Feed-through: Ø 125 mm Ø 50 mm Data for temperature tests: Temperature range -42°C to +180°C Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.5 K Djb Hdrjqnutmjdqocg Rate of temperature change: Heating 4.0 K/min Cooling 3.0 K/min max. heat compensation at +20°C 4500 Watt Data for climate tests Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% r. h. Temperature deviation temporal ± 0.1 to ± 0.3 K Spatial temperature homogeneity ± 0.5 to ± 1.0 K Humidity deviation temporal ± 1 to ± 3% r. h. Heat compensation max. 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404 A Weight approx. 840 kg Type: VC³ 4100 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after a successful check, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Weiss climatic test chamber. Dcjb Hdeq Dpzyordqog Water-cooled Test chamber lighting Halogen bulb 24V, 50W Data for temperature tests: Temperature range: -40°C to +180°C Temporal temperature deviation in the center of the chamber: ± 0.3 to ± 0.8 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate Heating: 10 K/min Cooling: 12.5 K/min Heat compensation at +20°C 8000 W Heat compensation at -20°C 3000 W Data for climate tests Temperature range: +10°C to +95°C Humidity range: 10 to 98 % r.h. Temperature deviation in time in the center of the usable space: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Humidity fluctuation over time in the center of the usable space: ± 1 to ± 3 % RH Test chamber dimensions: Height 950 mm, width 760 mm, depth 650 mm, External dimensions: Height 2025 mm, width 1090 mm, depth 2480 mm, Nominal voltage: 3/N/PE AC 400 V ± 10% 50 Hz Rated current: 24 A Rated power: 16.0 KW Refrigerant: R452A Weight: approx. 900 kg Type: WK-480/40/10 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Despatch lab oven. Despatch Laboratory Ovens + 8 "WAFER LCC: Maximum temperature 260 ° C Lockable circuit breakers turn on the control panel for easy maintenance Protocol 3 control with large LCD display, built-in data logging capabilities and USB port for easy oven setup and data export Edelstellenne room with interior seams welded continuously on the insulation side to protect the working space from pollution Programmable door locking prevents the operator from opening the oven door while the cycle is running The door lock switch turns off the heating when the door is open The rolled air flow consists of 100% HEPA (High Efficiency Particulate Air) and is filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic Manometer monitors the pressure drop of the HEPA filter so you know when to replace the filter Electric door unlocking for ergonomic operation UL & C-UL Listed Control Panel Open Modbus communication connection (RS485) for remote monitoring and recording Chamber measure L 350 mm Chamber measure B 350 mm Chamber Measure H 350 mm Djb Hod Nfq Isdrdqjcg Maximum temperature 260°C Digital screen Yes Electric connection 230 V Total size L 830 mm Total dimensions B 910 mm Total Measure H 560 mm Type: LCC1-16NV-3 Condition: used/used Delivery: (See picture) (Changes and errors in technical D

Condition: good (used), Here we offer a Jouan C02 incubator CO2 incubator. The CO2 incubator is used to grow cell cultures. The following conditions are required for this: a sterile atmosphere a constant temperature a CO2-enriched atmosphere high humidity Dimensions and weight: Temperature range: room temperature + 5 ° C to 50 ° C CO2 detector: Infrared Size: 90 x 73 x 60cm Internal dimensions: 66 x 48 x 45 cm Outer material: steel Interior material: Stainless steel Inner door: Safety glass CO2 Incubator Jouan IG 150 Water jacket volume 85 liters maximum Volume 154 liters Maximum number of trays (3 supplied) Usable area per tray 0.16 m2 Usable maximum incubation area: 1.28 m2 minimum spacing height 66 mm empty weight approx. 80 kg Weight when filled with water approx. 170 kg Weight with packaging approx. 100 kg Power connection required: 230 V, 50 or 60 Hz. Power consumption max. 800 VA, normal consumption at 37 °C: 220 watts Fuses therm. Magnetic switch, set to 5 A at 220 V Phases earthed. Color of connections brown = phase, blue = neutral, yellow/green = earth Working range: Ambient temperature 15 - 30°C CO2 inlet pressure 300 mbar - 3 bar Interior temperature range from 5°C above room temperature to 45°C Working range with CO2 gas 0.0 % to 20.0 0/0 Article weight: 80.00 kg Type IG 150 Scope of delivery: (see picture) 2 weeks commissioning guarantee The device comes from stock. We deliver with express shipping (DHL, UPS, TNT) Dceb Hdsccb N Uordqjg We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Here we offer you an S & A test chamber for parametric testing. S & A test chamber for parametric testing Temperature range: 55°C to +150°C Stability: ± 0.1 ° C including the effects of mains voltage, ambient temperature and ageing. temperature and ageing Cooling medium: Water-cooled mechanical cooling Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 250 kg Type: 4220A Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Dcob Hdecnic Sordqog We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), White Type: SC / KWT - 1000 Technical data: Salt spray mist test MIN 5 K > Tu MAX +50°C Condensation water test MIN 5 K > Tu MAX +45°C Humidifier MIN 5 K > Tu MAX +75°C Temperature constancy The temperature deviation over time is ±1 K Dimension with hood: Test chamber: H 1190 mm x W 1650 mm x D 570 mm Dimensions without hood: Test area: H 740 mm x W 1650 mm x D 570 mm Dimensions with hood: Outside: H 1370 mm x W 2730 mm x D 800 mm Djb Hdrderh Dmqoqecg Dimensions without hood: Outside: H 920 mm x W 2730 mm x D 800 mm Capacity approx. 700 - 1130 liters 3/N/PE AC 400V ±10%50Hz Rated power 4 KW Rated current 7.5 A Weight: 180 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Dcsbsrknagj Hdrdqjg Specification jacket heating VT 6025 Temperature (metric) 200 °C Dimensions, inside (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements 230 V, 50/60 Hz Frequency 50/60 Hz Capacity (metric) 25 l Heating jacket type without inert gas connection Voltage 230 V 1.3 kW, 5.9 A Weight: 58 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Weiss temperature chamber. Weiss temperature test chamber With S!MCON / 32 control Water-cooled (refrigerant converted to R-452A) Touch panel" control unit All control and operating commands can be triggered on the "touch panel" control unit by simply touching the function icons. all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm Test chamber capacity: approx. 335 liters Test chamber dimensions: Height 750 mm, width 580 mm, depth 765 mm External dimensions: Height 1775 mm, width 870 mm, depth 1600 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate Djb Hdrorbigfsdqocg Heating: 3.2 K/min Cooling: 4.0 K/min Heat compensation max. 2300 W Data for operation: Test room lighting Halogen bulb 2x 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Rated power 4.1 kW On-site fuse 16 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 56 dB(A) Refrigerant: R-452A Weight: 515 kg Type: WT3-340/40 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Zwick / Roell Type: Mflow Area of application With increasing test volumes, the need for a higher degree of automation also increases (compared to the Cflow). The Mflow is a modularly expandable device, with which you can determine the melt mass and melt volume flow rate. The basic version of the Mflow extrusion plastometer is designed for MFR tests according to method A and can be upgraded for MVR tests according to method B. Tests according to the following standards are possible: - Methods A and B according to ISO 1133 - Methods A, B and C according to ASTM D 1238 - ASTM D 3364 - JIS K 7210 As an option, you can equip the Mflow with the pneumatic weight lift with and without cleaning function, for example. without cleaning function or weight staking. The Mflow can be operated both stand-alone via a modern touch display, as well as with the ZwickRoell testing software on a PC. Technical data Test load: 0.325 - 21.6 kg Compressed air, lubricated, dry: 6 - 10 bar Dimensions Height: 510 mm Width: 360 mm Depth: 419 mm Weight: approx. approx.: 43 kg Test temperature: +50°C - +450°C Display: Capacitive touch display Resolution of the temperature display: < 0.1 K Number of storable parameter sets: >100 Temperature accuracy in the range 0 - 75 mm above the nozzle in the temperature range 50°C - 450°C: < 0,3 K Time measurement Error limit (method A): ± 0.02 (with automatic cut-off device) Error limit (method B): ± 0.01 Displacement measurement Error limit (method B): ±0.02 mm (ISO 1133) / ±0.4 % of 6.25 mm (ASTM D 1238) Resolution: < 0.005 Multi-device operation on one PC: Available working memory, min.: 1.54 GB Clock frequency: 3 GHz Connectable Mflow extrusion plastometers per PC: 6 Mains connection: 220 - 240 V, 1L/PE/N Power consumption: 2.6 A Mains frequency: 50/60 Hz SW version: V4.2 Year of manufacture: 2021 Condition: used / second-hand Scope of delivery: (see picture) Dceb Hdetq Em Tsrdqsg (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), RS. simulators Type: ST2K320/45 K Water-cooled shock test system Temperatures in the upper test chamber Temperature range: + 40 °C to + 180 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Temperatures in the lower test chamber Temperature range: - 40 °C to +100 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Humidity in the upper test room Climatic temperature range: + 40 °C to +90 °C Humidity range: 20 % to 98 % (± 2 to 5 %) relative humidity Humidity: 25% to 75% relative humidity Working climate range: Temperature: + 12 °C to + 30 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 900 mm Height 2000 mm Depth 2300 mm Test room dimensions: Width 470 mm Depth 700 mm Height 440 mm Electrical power supply: Total power: 13 KVA Current consumption: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 950 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate Dcob Hdrstrf Uljdqsg 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Internal dimensions (net) H approx. 2150 mm W approx. 3000 mm D approx. 6000 mm Air circulation system (on chamber rear wall) Width approx. 800 mm External dimensions with machine unit and without control cabinets Height approx. 3360 mm Width approx. 3320 mm Depth approx. 8620 mm Machine room, attached to the rear wall of the chamber Height approx. 2340 mm Width approx. 3320 mm Depth approx. 1500 mm Electrical control cabinet, mounted on the side of the base frame Height approx. 2340 mm Width approx. 2400 mm Depth approx. 600 mm Chamber door (double-leaf) Height approx. 2150 mm Width approx. 3000 mm Pedestrian door (single-leaf) Height approx. 1900 mm Width approx. 900 mm Lighting (switch next to pedestrian door) 4 incandescent lamps 60W Djbetrmm No Hdrdqjcg Feed-throughs 4 pcs. 125 mm ∅ Floor load capacity 30,000 N/m² (surface load); 2,500 N per polyamide wheel Ø100mm; 4,000 N for a wheel with 4 cm² Ceiling opening (clear dimensions of the lower disk) Length approx. 600 mm Width approx. 700 mm Quantity: 10 pieces Ceiling load: 10 SoSi radiators + 1 person 90 kg Working temperature range: Temperature range -40 °C ... +120 °C (discontinuous) Cooling speed: approx. 1 K/min. linear from 80°C to -40°C with test specimen mass and without thermal load, measured in the air outlet of the air circulation system. At temperatures < (-20°C) the recirculated air volume is reduced by 50%. (e.g. PV 1200) Heating speed: approx. 1 K/min. linear from -30°C to +90°C with test specimen mass and without thermal load, measured in the air outlet of the air circulation system. (e.g. PR 308.2) Test specimen mass: 600 kg aluminum (vehicle - partial body) Working range climate without sunlight simulation: Temperature range: +10 °C ...+95 °C Temperature constancy: ≤ ± 0.5 K (temporal) Temperature constancy: ≤ ± 2 K (spatial) Humidity range: 20 ... 80 % r.h., without thermal load Dew point temperature range: -2 °C ...85 °C without thermal load Climate working range with sunlight simulation: Temperature range: +23 °C ...+50 °C Temperature constancy: ≤ ± 0.5 K (temporal) Humidity range: 20 ... 70 % r.h., with thermal load Dew point temperature range: -2 °C ...43 °C without thermal load Thermal load of the SoSi: Max. 10 kW Temperature and humidity instances: Temperature The following maximum deviation is specified for the temperature in the climate and temperature range (including measurement uncertainty and with test material): Blow-out after 15 minutes: ±1K Intake after 45 minutes: ±1.5K (external sensor) Humidity For the relative humidity at the operating point 80°C / 80% r.h. the following maximum deviation (including measurement uncertainty and with test material) is specified: Blow-out after 30 minutes: ±3% r.h. Intake after 60 minutes: ±3% r.h. (external sensor) Connection and consumption data: Air-cooled refrigeration unit, maximum air temperature +38°C Refrigerant R 404 A and R23 Water supply for humidifier: Approx. 40 l/h = 40 kg/h installed steam output, demineralized water, electrical conductivity 5-20 μS/m Mains connection: 400 V; 3 PH + N + PE; 50 Hz Connected load: 250 kVA, 350 A Connection according to VDE 0110 group 2: 5x185 mm2 CU On-site fuse protection: 355 A Air circulation volume (FI-controlled): 24,000 to 28,000 m³/h FC basic setting: 50% (achievement of the parameters) Technical data solar simulation: Manufacturer: BF Engineering GmbH Type: G-BEM-1119 Number of lights: EPSU 2 x 2k_HQI Ballast: 10 Ignitor: IGC-4k-03 Light source: OSRAM HQI 2000W High Flux 3〜/ N / PE

Condition: excellent (used), CTS Type: C-40/1000 CTS climatic test chamber Condenser chiller air-cooled Control: 32 bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature test: Temperature range: -40°C to +180°C Temperature change rate Heating speed 2.0 K/min Cooling rate 2.5 K/min Temperature deviation ± 0.1 to ± 0.3 K in time Heat radiation: approx. 2500 W at +20°C approx. 2500 W at ± 0°C approx. 1500 W at -20°C Climate Working range: Temperature range +10°C to +95°C Humidity range 10 to 98% r.h. Dew point range I +7 to +94°C Dew point range II -10 to +7°C Temperature deviation ± 0.1 to ± 0.3 K in time Humidity constancy I, temporal ± 0.5 to ± 1.5 % r.h. Humidity constancy II, temporal ± 1 to ± 3 % r.h. Panorama window 570 x 710 mm Test chamber dimensions Width 1000 mm Depth 1100 mm Height 900 mm External dimensions Width 1270 mm Depth 2220 mm Height 1950 mm Test chamber volume 1000 liters Pipe feed-throughs, ø 50 Electrical connection: 400 V +6/-10% 3/N, PE 50 Hz Connected load: 8.4 kW Rated current: 12.4 A Refrigerant: R-404A Weight: 800 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant Dob Hdsru Dzujrdqjcg 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Heraeus Vötsch Dceb Hdeu Hf Hhjrdqog Type: VT 4021 Heraeus Vötsch temperature test chamber air-cooled Housing dimensions: Width 850 mm Depth 1250 mm Height 1640 mm Interior: Width 560 mm Depth 570 mm Height 630 mm Temperature range -40°C to + 180°C Temperature deviation in time ±0.2 to ±0.5 K Spatial temperature deviation ±0.5 to ±1.5 K Temperature change rate cooling 3.1 K/min Temperature change rate heating 2.5 K/min Nominal voltage: 1/N/PE AC 230V±10% 50Hz Rated power: 1.5 kW Rated current: 7 A 2X side feed-through 90 mm Refrigerant: R-404A Weight approx. 325 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus temperature chamber Here we offer a temperature chamber. Water-cooled Outside: W x D x H (mm) 1100 x 2200 x 2320 Inside: W x D x H (mm) 800 x 800 x 790 Test chamber volume 500 L Characteristic values for temperature tests: Temp. range -70°C to +180°C Heating speed: 3 K/min Cooling speed: 2 K/min Electrical power: Rated power 15 kW Rated current 26 A 400 V +6/-10% 3/N 50Hz Weights: 675 kg Type: HT/S 7050 R404 A and R23 The following information is for your safety as a buyer! Dcebju Efm So Hdrdqog The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VT³ 4150 Vötsch temperature test chamber Air-cooled Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Rate of change: Cooling approx. 3.5 K/min. Rate of change: Heating approx. 4 K/min. Temperature test Temperature range -40°C to + 180°C Display plan External dimensions: W x D x H approx. 1390 x 2380 x 1995 mm Test chamber dimensions: W x D x H approx. 1100 x 1475 x 950 mm Weight approx. 1020 kg / 1540 liters Refrigerant R 404A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Dcjb Hsu Nh Rbodrdqjg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion test chamber for salt spray tests Specifications: Test chamber volume: approx. 1000 L Test chamber dimensions (ΒχΤχΗ1/Η2): 1400x800x800/1020 mm Deb Hdet Igc Sjrdqocg Door opening dimensions (WxH): 1300x680 mm External housing dimensions втн: 2162 x 995 x 2080 mm Operating temperature range: 5°C > room temperature to +80°C High-load version for loads up to 350 kg Process control: Beckhoff PLC, color touch screen display display, 50 memory locations for test procedures, 50 Memory locations for test segments, ramps: Humidity-temperature over the entire working range, Ether connection Electrical connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar Tap connection 3/4" External thread for connecting an ion exchanger cartridge Compressed air: 7-8 bar Waste water: Siphon / 30 mm ID hose nozzle Exhaust air: pipe end OD 75 mm Operating systems: Salt spray Condensation water (CWC) Ventilation Room air Warm air Controlled humidity

Condition: excellent (used), Sonix Type: Echo VS Acoustic scanning microscope enables the inspection of packaging. Features: To detect the smallest and most subtle defects in state-of-the-art packaged microelectronics applications, ECHO VS includes standard features such as heated water for optimal acoustic coupling, flexible TAMI for efficient acquisition of the most useful data, Deb Hdotz Rkmsrdqscg Waveform Averaging for improved signal-to-noise ratio, ICEBERG for improved image quality and MFCI for improved image quality in the most demanding applications. ECHO VS is the ultimate ultrasonic NDT device for molded flip chips, CSP, MCM, stacked die, MUF and other advanced packaging technologies. Detects air defects as small as 0.01 microns and spatially resolves defects down to 5 microns. Image enhancement suite with heated water, waveform simulation and other innovations for industry-leading image quality in advanced packaging applications Image optimization for improved image quality in complex molded flip chips (MUF) and packages with polyimide layers Waveform averaging for improved signal-to-noise ratio Wide range of converters from very low to ultra-high frequency Stacked Die Imaging (SDI) (optional) Molded Flip Chip Imaging (MFCI) Voltage / power consumption: 100-120/220-240 VAC 1PH/N/PE, 50/60 Hz 10 A Condition: gebraucht / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances of 40 % of the lower explosion limit (LEL) Highest temperature of the heating surface above 750 °C Device description: Technical data: Interior (usable space) 0.216 m3 Internal dimensions: Width 600 mm Height 600 mm Depth 600 mm External dimensions: Total width 796 mm Height 1725 mm Depth 850 mm Loading / load capacity Total roller conveyor 55 kg Loading height above installation floor 820 mm Weight (net) kg 275 Minimum exhaust air volume flow 96 m3/h Purge time 5-fold air change 90 sec. Increased recirculation air volume flow 33 m3/h Total vapor space 0.414 m3 Sound pressure level (according to DIN 45635) < 70 dB(A) Switch-off temperature Temperature limiter (TB) fixed setting 300 °C Temperature selector limiter (TWB) adjustable above nominal temperature 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB) 1 Temperature selector limiter (TWB) 2 Nominal temperature 200 °C Electrical data Rated voltage / frequency 400V, 3/(N)PE, AC 50/60 Hz Rated current 12.0 A Nominal power 6.0 kW Dcebjun Rrqs Hdrdqog Connected load 7.0 kW Weight: 275kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), RMS Type: SW 3509 + amplifier TGD 6000-000.00 and fan Test Manager SWR 900 Power amplifier: TGD 6000 Vibration exciter: SW 3709 High-pressure fan HVM 80-100 GL 270 RMS electrodynamic vibration test system: Technical data system: Performance data Max. Vector force sine 7.5 kN Max. Vector force noise 6.75 kN Max. Vector force shock 13.1 kN Frequency range 0 - 3000 Hz Mass of the vibrating system (Dyn.) 9 kg Main resonance (unloaded) 2.5 kHz Max. Amplitude (sine) 18 mm (noise, shock) 26 mm Max. speed (sine) 1.5 m/s (noise, shock) 2.5 m/s Max. Acceleration sine vibrating system unloaded 833 m/s² Additional load 10 kg 394 m/s² Additional load 30 kg 192 m/s² Additional load 50 kg 127 m/s² Max. Acceleration noise Additional load 30 kg 173 m/s² Max. Acceleration shock vibrating system unloaded 1450 m/s² Additional load 30 kg 335 m/s² Stray field Stray field without counter field coil On the table surface 20 mT 120mm above the table surface 7 mT Stray field with counter field coil On the table surface 10 mT 120mm above the table surface 2 mT Vibration isolator Operating range vertical/ horizontal Resonant frequency 2.7 Hz Operating air pressure 5 bar Pneumatic weight compensation Max. Weight compensation 250 kg Operating air pressure 2.3 bar Cooling Vibration exciter air min. Cooling air volume 9 m/min Max. exhaust air temperature (based on room temperature 35°C) 80°C Power booster air Heat dissipation to room air 1.5 kw Emission: Sound pressure level 1m - distance at a height of 1.6m 105 dBA Electromagnetic field SW 3709 typ. 1.5 mT ( 50Hz) typ. 0.5 mT (100Hz) Electromagnetic field TGD 3000 typ. 150 HT (50Hz) Dimensions / Weights Table diameter / insert thread 224mm / M8 Vibration exciter with integrated isolators Dsb Hsu Tud Hedrdqocg 970 × 695 x 950 mm (W x D x H) Weight: 1200 kg Power amplifier 550 x 700 x 2075 mm (W x D x H) Weight: 270 kg Cooling fan 839 x 582 x 900 mm (W x D x H) Weight: 80 kg Connection values: Mains voltage +6/-10% 3 x 400V, 50Hz Connected load 18 KVA Power consumption (sweep mode sine wave) 12 kW Total weight approx. 2000 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2010, Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VLM 3068/S air-cooled (building material test chambers loaded from above) Control panel The control panel is mounted on a console on the temperature test chamber. By control and operating commands can be triggered by simply touching the function symbols. can be triggered. The operating instructions for the control panel are enclosed Main switch The main switch is located at the front of the temperature test chamber. Air treatment room The air treatment room is located in the test room and contains the components required for temperature control. In the air treatment room, the air is tempered (cooling/heating) and circulated by the test room fan. circulated by the test room fan. The air is sucked in at the center of the side wall and enters the test chamber again via the air baffles on the long sides. Feed-throughs The temperature test chamber can optionally be equipped with feed-throughs. Through these can be used to route cables and test equipment into the test chamber. Entry port front 2 x 82 mm ∅ rear 1 x 85 mm ∅ Internal dimensions Width 2000 mm Depth 570 mm Height 600 mm External dimensions Width 3000 mm Depth 870 mm Height 1060 mm Technical data: Data for mechanical load: Max. load with test material Test area floor (evenly distributed over the surface) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Nominal voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Customer fuse 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Dcsb Hdjrbiyfsrdqsg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), White Type: WK-1000/40/5 Weiss climatic test chamber with Weiss air-cooled condenser S!MCON / 32 control unit Test chamber capacity: approx. 990 liters Test chamber dimensions: Height 950 mm, width 1100 mm, depth 950 mm, External dimensions: Height 1995 mm, width 1390 mm, depth 1855 mm, Data for operation: Test room lighting Halogen bulb 24V, 50W Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power 23 KW Rated current: 33 A Debou Ap Sms Hdrdqecg Data for temperature tests: Temperature range: -40 to +180 °C Temperature deviation in time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate Heating: 6.1 K/min Cooling: 6.7 K/min Heat compensation max. 5000 W Data for climate tests Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature deviation in time in the center of the usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Humidity fluctuation over time in the center of the usable space: ± 1 to ± 3 % r.h. Dimensions incl. feet Width x depth x height: 1190 x 1120 x 1093 mm Refrigerant: R404 A 5.2 kg Weight: approx. 840 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Djb Hdsrm Rihordqecg Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification jacket heating VT 6025 Temperature (metric) 200 °C Dimensions, inside (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements 230 V, 50/60 Hz Frequency 50/60 Hz Capacity (metric) 25 l Heating jacket type without inert gas connection Voltage 230 V 1.3 kW, 5.9 A Weight: 58 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.