Used Material testing for sale (494)

Condition: excellent (used), Vötsch Type: VC³ 4018 Vötsch climate test chamber VC³ 4018 air-cooled Technical data: Test room dimensions: width 580 mm x depth 450 mm x height 750 mm Housing dimensions: width 870 mm x depth 1550 mm x height 1800 mm Test room volume: 190 liters Implementation built into basic equipment R1: ® 125 mm L1: © 50 mm Data for temperature tests: Temperature range: -40°C to +180°C Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.5 K Temperature change rate Heating 4 K/min Cooling 4 K/min max. heat compensation 2300 W Data for climate tests: Temperature range + 10 to +95 °C Dew point range -3 to +94 °C Humidity range 10 to 98 %r.h. Temperature deviation over time ± 0.1 to ± 0.3 K Temperature homogeneity spatial ± 0.5 to ± K Humidity deviation over time ± 1 to ± 3 %r.h. Cgeb Hagjvpt Ins Hzst Heat compensation 400 W Data for operation: Test room lighting halogen bulb 2 x 24V, 50W 3/N/PE AC 400V±10% 50 Hz Rated power 4.1 kW Rated current 14 A Weight: 470 kg For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2017, Condition: not inspected (used), Functionality: unexamined, We offer you, HI-SCAN 6046si detector manufactured in 2017 by Malaysian manufacturer SMITHS DETECTION. X-ray inspection system designed for security checks of baggage, parcels, or screening of technical products. Cgjb Hag Hjv Ewdxjzjt Physical dimensions: length: 2004mm (79 inches) width: 850mm (33 inches) Through-hole size: 62 x 45 cm Tape width 53cm X-ray generator: voltage: 160kV; penetration: ability to penetrate steel up to 37mm; detector: high-resolution XADA detector modules; resolution: ability to detect wires up to AWG 41; total weight: 400kg (882 pounds) During the inspection, the machine was disconnected from the power supply - no possibility of testing in operation.

Condition: good (used), We offer for sale a Heraeus heating and drying oven. Heraeus heating and drying oven Cgob Hagevzqyfo Hzet manufacturer HERAEUS Type: 6200 condition: Used in good condition air mixing oven: up to 250°C Internal volume: 180 liters temperature controller and timer air mixing voltage: 2800watt 1 phase 230volt 50Hz 12.3A IP20 External housing: width 800 mm, length 890mm, height 810 mm. Internal dimensions: width 510 mm, length 550 mm, height 650 mm weight: 100kg

Condition: refurbished (used), Basic equipment: - Set of weights from 1 kg to 250 kg. - Complete optical equipment with vertical illuminator and interchangeable 70x Zeiss lens - Scale holder with interchangeable 70x scale - Available as an OPTION for an extra charge: scale with vernier 70/140x - Ground glass holder with ground glass D=135mm and Fresnel lens to brighten the ground glass. - 1 pc. Ball holder D=2.5mm with carbide ball - 1 pc. Hardness comparison plate HBW 2.5/187.5 - Clamping cap - Threaded spindle with handwheel Cgjb Hag Hepm Efbezet - Spindle guard - Test table flat D= 80mm (available at extra charge: test table 200mm x 200mm or D= 235mm) - Incandescent lamp 12 Volt 50 Watt - Mains connection 230 V / 50/60Hz. - Factory test certificate This device is equipped with a digital caliper gauge, which is not included in the price. This is what a reconditioned Dia Testor 2Rc can look like: This device serves only as a sample.

Year of construction: 2020, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 1731677, THERMAL & VIBRATION CHAMBER THERMAL and VIBRATION TEST CHAMBER Cob Hev A Rrweag Hzegt CHART TYPE : TVC -4 Temp. Range: -100 to +200 Celsius Prod Temp Change 60 Celsius/Min Vibration level 60gRMS Vibration Table: 61 x 61 cm Interior dimensions 76 x 66 x 91 cm Exterior dimensions 152 x 112 x 216 cm Vibration Table Size: 61 x 61 cm Weight About: 400kg Line Volt Input 400 3 Phase 50 Hz Chamber comes out of the running in 2023. Delivery including many replacement modules and parts see pictures. Shipping with a forwarding agent is possible, please inquire

Year of construction: 2015, Condition: used, Tension-compression-rotation universal testing machine with 2 separate drives (linear/angular) in alternative operation. Max. nominal load: 250kN Ceb Haov Edudjg Hzogt Max. torque: 500Nm Machine has a swiveling oven for hot tensile testing

Condition: excellent (used), Primus Engineering Type: DST 2000 This test device was designed to carry out IP protection class tests "dust" according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust within the limits specified in the technical data. It was developed for this purpose and must not be used for other purposes. The test device may only be operated with non-flammable and non-explosive dust! Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Technical data: Total electrical power: Max. 2 KW Connection voltage: 400 V / 50 Hz 3-N/PE (16 A EEC socket) Exhaust air connection: DN100 (flange) Cjb Hag Hovptykezjgt Dimensions: Width approx. 1,300 mm Depth approx. 1,000 mm Height approx. 2,000 mm Dimensions of test chamber: Width approx. 1,000 mm Depth approx. 1,000 mm Height approx. 1,000 mm Volume approx. 1,000 liters Mass: approx. 350 kg Dust test: Dust-protected IP5X Dust-tight IP6X with and without vacuum Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: like new (used), Functionality: fully functional, Year of construction: 2021, operating hours: 421 h, Equipment: onboard computer, ICT Testing and Inspection Machine for Electronic Boards with 4 Flying Probes, Model SPEA 4050S2M with Manual Loading, Practically New and Complete with Various Accessories and Computer, Licenses and Installation CD. Cgsb Hajv Tb Udeg Hzot

Condition: like new (used), Binder FED 400 as good as new. PRODUCT DESCRIPTION The BINDER FED series heating chamber offers almost unlimited performance options and is particularly adaptable. Thanks to the extended time functions and the adjustable fan, the temperature and convection conditions can be ideally controlled. KEY FEATURES Temperature range: Ambient temperature plus 5 °C to 300 °C APT.line™ preheating chamber technology Adjustable fan speed Adjustable air outlet flap Controller with extended time functions 2 chrome-plated wire shelves Independent, adjustable temperature protection class 2 (DIN 12880) with visual alarm Interface for connecting to a computer: RS 422 Cgeb Hagov Up Nxe Hzst

Condition: as good as new (ex-display), Hardness tester Vickers UCI mini (Portable) incl. probe Standard scope of delivery: - Device - Probe cable - Charger 230V/50/60 Hz - mains plug Cjb Hajqt Eddsg Hzogt - carrying case - Operating instructions - Certificate

Condition: excellent (used), Here we offer a climate test chamber. Cjb Hag Hjvu Ui Rjzsgt Climate cabinet RS SIMULATORS KS600/70 AIR COOLED Climatic test chamber -70/180°C + humidity Last maintenance and leak test carried out 03/2024 by RS simulators Here we offer a climate test chamber. RS climate test chamber air-cooled Refrigerant: R404/R23 Temperature range -70°C to + 180°C Time deviations +/- 0.5 K with empty test chamber Average heating and cooling time approx. 2 K / min Humidity range 10% to 95 % External dimensions: width 1200 mm depth 1600 mm x height 1995 mm Test chamber dimensions width 840 mm x depth 840 mm x height 840 mm Nominal voltage: 3/N/PE AC, 400 V, 50 Hz Nominal power: 7.5 KVA Nominal current: 15 A Fuse, on-site: 16 A slow-blow Side feedthrough Cabinet is air-cooled Refrigerant R-404A/R23 Weight approx. 600 kg Type: KS 600/70

Condition: used, machine/vehicle number: 83040, Projection: 150 mm Inspection height: 200 mm Space requirement: 350 x 600 x 1410 mm Csb Hag Hjb Dkh Nezogt

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Ceb Hagsrt U Nuj Hzjgt Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2016, Condition: ready for operation (used), An almost new Anritsu X-ray inspection system is available. X-ray power: 100W, max. detection width: 240mm, max. detection height: 120mm, detection speed from 2kg to 5kg: 10m-60m/min, detection speed up to 2kg: 60m-90m/min, detection speed from 5kg to 10kg: 10m-40m/min, housing material: stainless steel, machine weight: approx. 255kg, operating hours: less than 50h. The machine shows no wear on the conveyor belt or the radiation protection curtains. Documentation available. On-site inspection is possible. Cob Haovzr Aujg Hzsgt

Condition: as good as new (ex-display), Year of construction: 2022, Binder VDL 115 vacuum dryer like new. Manufacturer's description: Fast, gentle drying Safe operation thanks to the safety concept in accordance with the ATEX directive Also optionally available as a complete modular system with vacuum pump and pump cabinet Temperature range: ambient temperature +9 °C to +110 °C Device complies with ATEX standards: EX II 2/3/- G IIB T3 Gb/Gc/- X Intuitive controller with touchscreen graphical display of pressure and temperature Software-controlled drying monitoring with automatic aeration at the end of the process Internal data logger, measured values in open format can be read via USB Pressure safety device for activating heating from < 100 mbar 2 aluminium expansion shelves, individually positionable Universal connection for ventilation with ambient air or inert gas Universal access port with small DN 16 flange and cap, for mounting sensors or feeding power lines into the chamber. Safety glass pane, spring-mounted, with splash protection Large viewing window PC interface: Ethernet Optional equipment Shelves – choice of aluminium or stainless steel shelves depending on the requirements of the given test Analog output for pressure and temperature signals – for external monitoring and analysis of process parameters, can be integrated with your own systems Universal ventilation – various ventilation options: air or inert gas DN 40 access port – for inserting external measuring instruments APT-COM Multi Management Software – device parameter management, recording and documentation Services – a wide range of service services ensures correct operation of the devices External dimensions: width 743 [mm] height 942 [mm] depth 581 [mm] Internal dimensions: width 506 [mm] Cjbevq I Tns Hag Hzegt height 506 [mm] depth 460 [mm]

Year of construction: 2018, Condition: good (used), Self-clamping wedge grips 100KN. The wedges remain stationary over the shaft when the initial gripping force is applied to the specimen, preventing excessive compression of the specimen prior to testing. The clamps are used with cross-hatched jaw faces for clamping flat specimens. Clamping dimensions H75mm W50mm Opening width 14mm Cgeb Hagoupfk Ds Hzot

Condition: used, Measurement data acquisition device, test device, telemetry system -Axon: J1-CS10 Torque Telemeter Ceb Hefg E Haeag Hzogt -Dimensions: 205/60/H110 mm -Weight: 0.8 kg

Condition: excellent (used), White Type: WKL 100/70 Air-cooled with humidity -70 to 180°C Test chamber capacity approx. 100 liters Weight 210 kg Internal dimensions: Height 400 mm Width 470 mm Depth 345 mm External dimensions: Height 1776 mm Width 745 mm Depth 980 mm Data for mechanical stress: Maximum load on the test chamber floor 10 kg 10 kg per grate insert Total load on the grate supports 50 kg Data for operation: Test chamber lighting halogen bulb 24V, 50W Nominal voltage 1/N / PE AC 230 V ± 10% 50 Hz Nominal power 3.5 kW Nominal current 15.2 A Fuse provided by the customer 16A slow-blow Protection class Control cabinet IP 22 and control panel IP 54 Heat emission air-cooled test cabinets: Max. heat emission to the environment 2500 W Noise measurement Sound pressure level free field measurement at a distance of 2 m from the front and 1.0 m high approx. 59 dB(A) Characteristics for temperature tests Temperature range -70 to +180°C Temperature differences in steady state Temperature fluctuation over time in the middle of the usable space ± 0.3 to ± 1 K Temperature deviation spatially ± 1 to ± 2 K Temperature change rate Heating 3.5 K/min Cooling 3.5 K/min Heat compensation max. 700 W Characteristics for climate tests Data for humidification system Contents of the storage tank approx. 13 l Water quality Demineralized pH value 6 – 7 Conductivity max. 20 μS/cm Water consumption at constant temperature +40 °C, 92 %RH 2 l / 24 h Ceb Hsvpgnusag Hzogt Temperature range +10 to +95 °C Humidity range 10 to 98 %RH Temperature and humidity differences (in steady state) Temperature fluctuation over time in the middle of the usable space ± 0.3 to ± 0.5 K Temperature deviation spatially ± 0.5 to ± 1.5 K Humidity fluctuation over time in the middle of the usable space ± 1 to ± 3 %RH Flow through 50 mm ∅ Interfaces: Ethernet interface (RJ45), USB interface Refrigerant: R404A / R 23 For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Inductive conductivity transmitter, conductivity transmitter, conductivity measurement -Manufacturer: EH Endress Hauser, conductivity transmitter -Type: conducta XR 2 -100434-0100 -Measuring range: 0 to 100% -Voltage: 220V 50/60Hz Csb Hageldk I De Hzogt -Dimension: 180/95/H95 mm -Weight: 0.8 kg

Condition: used, Clamping jaws for round specimens -Manufacturer: VAS, clamping jaws for round specimens 4 pieces Cgsb Hag Hjmiqm Sezjt -Type: 15-30mm -Dimensions: see photo techn. drawing -Dimensions case: 270/230/H80 mm -Weight: 6.2 kg

Condition: used, Measurement data acquisition device, test device, telemetry system, Can-Bus monitoring -Gemac: CANobserver Cgjb Hagefg E E Nj Hzjt .: 22550-00 -Number: 1 pieces -Dimensions: 115/50/H125 mm -Weight: 0.5 kg

Condition: used, Measurement data acquisition device, test device, telemetry system Cgob Hagofg E E Us Hzst -Telemetry Division: Microdac B1A -Frequency: 10.7 MHz -Price: per piece -Number: 2 pieces -Dimensions: 220/105/H85 mm -Weight: 1.0 kg/piece

Condition: used, Inductive conductivity transmitter, conductivity transmitter, conductivity measurement -Manufacturer: EH Endress + Hauser, conductivity transmitter Cjbsldk Ikj Hag Hzjgt -Type: conducta XR 2 -Measurement range: 0 to 200 mS -Voltage: 220V 50/60Hz -Dimension: 180/95/H95 mm -Weight: 0.8 kg

Condition: used, Sample gas cooler Csb Haodnca Hsg Hzsgt -Measuring gas cooler with: protective lining -Connection: 240 volts -Dimensions: 335/560/H390 mm -Weight: 32 kg

Condition: used, Pore finder, pore finder, surface tester -portable high-voltage pore detector -Pore locator is an ideal device for detecting pores and imperfections -in dielectric (electrically insulating) coatings -such as paints, enamels, plastic layers on all metals and concrete. -Dimensions: 390/220/H260 mm Csb Haob Uhtqsg Hzsgt -Weight: 7 kg