Used other measuring & testing equipment for sale (161)

Condition: good (used), Force measuring device, force measuring instrument, calibration, force measurement technology, load cell, tensile force measuring bearing, force sensor, tensile and compressive force sensor -Manufacturer: Lorenz, 4 pieces tension and compression force sensor with Durbal, rod end spherical bearing -Sensor: Lorenz Type K-12 -Measuring range: - 100 kN -Sensitivity: 1.000mV/V / 0.999mV/V / 1.001mV/V -Swivel bearing: Durbal EF 35-20-501 -Dimensions of the articulated rod: 445 to 530 x 81 x 65 mm -Fork head: Bore Ø 35 mm -Number: 3 boxes available, sensitivity as shown in photos -Price: per box Itsdpfxeg Sxyvo Addob -Box dimensions: 590/390/H200 mm -Weight: 30.2 kg/box

Year of construction: 2010, condition: used, Shear beam load cell -Nominal load: 500 kg -Nominal value tolerance: %+/- 0.1 Itedpfx Ajdkpa Sjddob -Stainless steel: 1.4548 -Protection class: IP 68 -calibratable -Dimensions: 32/32/130 mm -Net weight: 0.98 kg

Condition: used, Terminal and trim box, road cell -Terminal box: for up to 4 load cells -Inputs and outputs: via PG screw connections -Protection class: IP 65 -4 inputs, cable gland M12 for cable diameter: 2 to 6.5 mm -1 output, cable gland M20 for cable diameter: 7 to 12 mm Itjdpfx Ajdntfxsddjb -Number: 2x available -Price: per piece -Dimensions: 205/110/H70 mm -Weight: 0.8 kg

Condition: used, Load cell, double bending beam load cell -Nominal load: 100 kg Isdpfx Aed Al Hioddstb -Accuracy class: C3 -Cable length: 3 m -Material: stainless steel -Protection class: IP 68 -Dimensions: 39/120 mm -Own weight: 0.4 kg

Condition: good (used), -Testing device for electrical equipment -each with isolation transformer Itedpfx Aob A Ivzoddeb -Number: 7 available Price: per piece

Condition: defective spare-parts repository (used), Oxford Instruments X-Strata 960 X-ray Fluorescence Analyzer – For Parts / Defective Item Description: For sale is a used X-ray fluorescence analyzer, model Oxford Instruments X-Strata 960. This device was removed during a laboratory decommission and is being offered exclusively for parts or potential repair. No functionality test has been carried out – the unit is therefore considered defective for the purposes of this sale. Technical Data – Oxford Instruments X-Strata 960 (non-binding) Feature Description Model: X-Strata 960 Manufacturer: Oxford Instruments Analysis Method: X-ray fluorescence analysis (XRF) Itodpshaapfefx Addob Applications: Coating thickness measurement, material analysis, precious metal testing Measurement Geometry: Top-down or bottom-up, depending on configuration Radiation Source: X-ray tube (e.g., rhodium anode), 50–100 W output Detector: Proportional counter or silicon drift detector (SDD), depending on version Measurement Range: Coating thickness approx. 0.005 – 50 µm (material-dependent) Spot Size: Approx. 15 μm – 1 mm (depending on collimator) Z-axis: Motorized travel, up to approx. 230 mm measurement height Sample Chamber (W × D × H): Approx. 580 × 510 × 230 mm Sample Table: Manual or motorized (200 × 200 mm or larger, depending on configuration) Focusing System: Optical / laser focus, semi-automatic Operating System: Integrated industrial PC with Windows-based evaluation software Power Supply: 220–240 V / 50–60 Hz / approx. 500–800 W Unit Weight: Approx. 150–200 kg (depending on version) Condition: Used / Defective / For parts Scope of Delivery: As shown in the images – without accessories or software Important Notes: - Sale expressly as a defective device with no guarantee of functionality. - The item is offered for parts or for repair enthusiasts. - No warranty as to function, completeness, or technical specifications. - Commercial sale excluding any liability for defects, in accordance with § 447 BGB (Shipping Purchase). Scope of Delivery: - Oxford Instruments X-Strata 960 - All components visible in the images - No further parts, accessories or documentation included unless explicitly listed. Shipping & Collection: - Collection is possible and preferred in Borken - Shipping available upon arrangement. (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Year of construction: 2016, condition: excellent (used), Horiba Here we offer a Horiba exhaust system Mexa 7100D. Including JAG-10-000-061 cylinder trolley approx 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust gas aftertreatment, Ijdjgkglxepfx Addjtb Evaluation of exhaust gas aftertreatment systems Modal analysis (dynamic or transient analysis) during transient operating processes Analyzer for CO/CO2 (HC, NO, N2o, SO2), O2, THC 200 operating hours Weight 620 Kg Year of manufacture 2016 Type: Mexa 7100D Condition: used / used Pick up from location Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), G.i.N. Type: GL5350 GL5350-8H-1R3L G.i.N. Intelligent data logger GL5350 Performance meets intelligence Future generations of vehicles will be increasingly equipped with intelligent driver assistance systems, complex multimedia components and and systems for autonomous driving. These complex, networked technologies provide ever larger amounts of data, which makes and more complex during the development phase. In order to shorten the test drives, reduce their number and still meet the test requirements of all departments, the advantages of an intelligent and powerful data logger data logger such as the GL5300 series come into play. The GL5300 series covers the time-synchronous recording of LIN/ CAN & CAN FD bus systems via FlexRay networks through to Ether- networks (TCP/UDP/DLT/ADB and Ethernet raw logging). This series also offers the connection of up to 8 cameras and up to 5 GLX504 for a further 20 CAN FD channels with SIC transceiver and up to 3 GL5450 for synchronous recording of up to 60 100-base T1 (30 taps) and up to 18 1000-base T1 routes (9 taps). Residual bus simulation Classifier Gateway CCP/XCP on CAN, XCP on CAN FD, XCP on FLexray, XCP on Ethernet Transmission of any freely configurable messages Selective recording (extensive triger and filter conditions) Data transmission via LAN/WLAN, USB and mobile radio Operation via menu control Technical data: GL5300 Configuration GL5350-8H-1R3L CAN interfaces CAN 2.0 16 CAN FD 4 LIN interfaces 5 RS-232 interfaces 7 Analog inputs 10 Bit 4 Operating voltage +7 V ... +50 V Power consumption at 12 V: typ. 10.3 W Current consumption at 12 V: in sleep mode < 2 mA in half-sleep mode typ. 180 mA in operation typ. 860 mA Operating temperature range -40 °C... +70 °C Housing: Material side profiles: Al Mg3 Cover: EN AW-6060 (AlMgSiO,5) T66 Trim strip: ABS Itedpfx Ajt R R Uweddob Dimensions (LxWxH) 212x 290 x 80 Weight ~ 3500g Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CEAST Type: 7026.000 CEAST Modular Melt Flow Tester Modular device for determining the melt flow rate Modular device for determining the melt flow rate in g/10 min and cm3/10 min according to international standards. Temperature range: +30 - +400°С (additionally up to 500°С). In the design of the device: - Microprocessor for automatic testing, storing test conditions (25 methods), storing and saving the results of 40 tests; Automatic calculation and display of temperature value and basic rheological data RS 232 and USB connection Diagnostics Automatic rotary knife for cutting extrudate Nozzle lock Loads: 500, 1000, 1050, 1200, 2160, 3800, 5000, 1600, 2500 The device can be connected to a computer and all functions are transferred to it. Itjdpfxevx Sxde Addeb The Visual MELT program is used. Standards: ASTM-ISO-DIN-BS-NF-UNI - GOST or equivalent. Methods A and B. Basic model + encoder + lift for raising and lowering the load + automatic knife for cutting the extrudate, code 7026.000 Maximum force: 1200 N Stroke mm.: 220 Volt: AC 230 50 Hz Serv: Temp. (S2 60 sec) ASS.: 1.8 A Vel. max: 10 mm/sec Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Testing System – For Laboratory Use Incl. PC, software & technical documentation For sale is a professional battery test system, consisting of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber - Monitoring/Sampling Unit - Control PC with original software - Technical documentation The system is fully functional, well-maintained, and ideally suited for battery module testing, research, development, and quality assurance. Technical Data – Scienlab SL1001A: - Manufacturer: Keysight / Scienlab - Model: SL1001A - Year of manufacture: 2020 - Voltage / Current / Power: 80 V / 600 A / 24 kW - Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m - Weight: approx. 700 kg - Function: Charging, discharging, and cycling of battery modules - Condition: Very well maintained, laboratory use only Technical Data – Angelantoni DM500 C 10 ESS SPEEDY BT SP: - Manufacturer: Angelantoni Industrie S.r.l., Italy - Model: DM500 C 10 ESS SPEEDY BT SP - Year of manufacture: 2019 - Weight: approx. 1,225 kg - Temperature range: -70 °C ... +180 °C - Humidity range: 10 ... 98 % rH - Refrigerants: R449A + R23 - Pressure ranges (PS Hi/Lo): 28 bar / 8 bar - Wi-Fi integrated - CE certification present - Internal dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m - Function: Temperature and humidity testing, ESS (Environmental Stress Screening) - Power supply: 3PH + N + PE, 400 V ±10 %, 50 Hz, full load 54 A - Max. power consumption: 32.5 kW Monitoring / Sampling Unit: - Dimensions: 0.6 × 0.5 × 0.2 m - Measured variables: Cell voltages, current, temperature - Interfaces: CAN, Ethernet - Compatible with Scienlab / Keysight PathWave software PC + Software + Documentation: - Industrial PC with control and measurement software - Enables automated test runs, logging, and data analysis Overall Dimensions / Weight (approx.): Component Dimensions (L×W×H) Weight Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Angelantoni Chamber 1.6 × 2.3 × 3.3 m 1,225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Total system L 3.2 m × W 2.5 m × H 3.3 m approx. 1,975 kg Applications: - Development, testing, and lifespan analysis of battery modules (e.g., Li-ion, LFP, NMC) - Fast charging and cycle tests - Environmental simulation for temperature and humidity - Research, industrial, and university laboratories Important Note: "The table shown in the photos is not included in the sale." Iodpfx Aoxuqk Hoddjtb Scope of Delivery: - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber - Monitoring/Sampling unit - Control PC with software - Technical documentation and manuals - Connection cables and accessories (as available) Condition: used Scope of delivery: (see image) (Specifications and data are subject to change and error!) For any further questions, we are happy to assist you by phone.

Condition: excellent (used), Perkin Elmer Type: Optima 7300 V Spectrometer Perkin Elmer ICP-OES Optima 7300V with cooler and S10 autosampler Itsdpfx Adsv Hzpuedob The optical system of the Optima 7300 V enables simultaneous measurement and coverage of the entire wavelength range (UV and visible). More than 73 elements can be measured in seconds to achieve exceptional sample throughput, and all raw spectral data is stored with full reprocessing capabilities. This allows sample results to be evaluated under different processing conditions, reducing the need for re-sampling and saving time and money. The Optima 7300 V was specifically developed for the special challenges of oil sample analysis and the analysis of special metals in laboratories and offers the following features: Classic vertical burner configuration with radial view Problem-free sample feed system Proven high-performance optical system Robust solid-state generator Two models available: oil version for oil analysis and HF version for geochemical and high-solid analysis Technical data: Ultraviolet wavelength range from 165 to 403 nm and for the VIS detector in the visible spectrum 404 to 782 nm Measurement of the spectral background possible during the analyte line Solid state 40 MHz signal generator Dimensions 150 x 76 x 89 cm (W x H x D) Power supply 200-240 V, 20 A line, single-phase, 50/60 Hz Maximum power 2800 VA Connection current 15 A Circulation cooler PolyScience Recirculator N0772025 Mains connection 200-240 V 50Hz Weight: 200 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, HPLC Waters Itsdpfxjvcnpae Addjb The system consists of these modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow control modules Flow rate from 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates from 0.10 to 5.00 µl/min. Flow control module Flow rate from 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples it takes from microplates or vials into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard rinse, or it can do so in less than 60 seconds, including a double standard flush. The sample manager accepts standard impression plates, 5.03 $0.02 in. x 3.365 $0.02 in, SBS/ANSI compliant plates (maximum height of 2.2 inches, including covers). The sample manager can test samples at any temperature between 4 and 40 °C (39 and 104 °F) at ambient conditions of 25 °C (77 °F) or less. Heating and trapping module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient to 65 °C (149 °F). The column base can be swiveled outwards to any position between 0° and 180°. In the 0° "Home" position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° "away" position, the analytical column can be connected to a mass spectrometer (on the right-hand side of the system). The Synapt G2 is a Q-TOF based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used as a peptide identification only (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Instruction manual Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), KSE Leak Test Bench Here we offer a KSE leak test bench. Test bench for automotive Testing of electric drives Isolatio/Tightness E-Motors Supply voltage: 400 VAC Control voltage: 24 VDC Iodpfx Adoiu H Hcsdetb Connected load: 0,75 kW Type: KSE I/SB-3 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Vision Engineering Specifications of the microscope from Vision Engineering: Eyepiece-less Three-dimensional viewing x3.5 - x120 stereo zoom magnification Features: Optical type: Application laboratory, inspection, for research purposes, forensic medicine, for dental laboratory, for welding work Observation technology 3D Configuration Desktop device Options and accessories USB camera, zoom Magnification Min: 3 unit Max: 240 unit Description: Lynx EVO is designed to increase productivity and efficiency through superior ergonomics. Iedpfxetqnklj Addjtb Regardless of the challenge - inspection, rework or refurbishment high resolution and high contrast 3D stereo images, you will work more comfortably and and more concentrated. Magnifications from 2.7x to 240x make it ideal for a wide range of applications. Greater efficiency: Lynx EVO offers improved hand-eye coordination, more working space for tools and better peripheral vision for easy interaction with the wider working environment and transforms the way you work. With no eyepieces to adjust, you can easily share between multiple users, to get maximum return on your investment. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 1998, condition: excellent (used), Article description: Itedsx Sw E Ujpfx Addjb Garant HD1 HC1 Digital Height Gauge 0 - 600 mm ----- Condition of the item: The item comes from a spare parts warehouse liquidation. The device has been stored dry and protected and is in good external condition. Flawless condition.

Year of construction: 2001, condition: used, Technical details: measuring range X-axis: 150-300 mm measuring range Y-axis: * mm Table dimensions: * mm Ijdexxl Saepfx Addstb measurement range Z =: 450 mm tool diameter: * mm tool taper: * SK compressed air: * bar dimensions: * m machine weight ab.: * kg clamping surface upper angle: * Mounted on 1 cabinet, equipped with 2 monitors, with keyboard, 1 control computer, 1 operating data printer *

Condition: good (used), Year of construction: 2015, functionality: fully functional, SPC measuring device / remeasurement station for measuring diameters and cylindrical form Measuring device, manual measuring station, testing device, test station Measuring computer QDS-Base, manufacturer KOMEG Manufacturer: Hafner Fertigungsmesstechnik Philipp Hafner GmbH & Co. KG 3 levels, each with 3 probes Measurement with pneumatic jet measuring mandrel in 3 levels, each level with one pair of nozzles Measuring computer QDS-Base, make KOMEG incl. measurement software, Profibus, interface, monitor, and keyboard Temperature compensation "Price / details on request". Itsdpfx Adjwxb Sfedob All technical data subject to typing errors or mistakes. We sell exclusively only to countries of the European Union.

Condition: used, Technical details: checking height: ca. 600 mm voltage: 220V / 80VA machine weight approx.: auf Anfrage kg dimension machine xH: Messständer: 0,75x0,45x1,04 m dimensions L x W x H: Messwertaufnehmer: 0,32x0,51x0,23 m Control unit module TPX Base plate/granite plate with T-slot: Size=L:650 x W:450 x H: 80mm Travelling beam travel Z = 600mm, by hand knob, and swivel 45° Measuring device, type perthometer PRK, size L:330 x W:150 x H:105mm; measuring head insert type Perthon RFHTB-250, Y-travel=60mm automatic/manual, as well as Z-travel=40mm via knurled wheel Itedou N Aw Nspfx Addob Measuring sensor, type Perthometer, digital display with printer Equipped with accessory box with various measuring head inserts (photo comparable) *

Year of construction: 1991, condition: used, Technical details: x-axis: 500 mm z-axis: 685 mm diameter: 300 mm air pressure - required: 5 bar tool table-turnable: 360° Tool table: Dm=745 mm tool diameter: ca. 290 mm total power requirement: 0,5 kW weight of the machine ca.: ca. 0,15 t space requirement of the machine approx.: 2,38x1,45x1,94 m Adjustment- and Measuring Device - measuring range z = 680mm - measuring range x = 500mm - pneumatical slide clamping - manual endless fine adjustment - turret rotating table - 220V/; 50/60Hz Itjdpou N An Iofx Addsb accessories: - taper 1x SK40 and 2 x SK 45 + chisel holder and adapter - brochure Sold as is. EDP not connected - hard disk and software missing *

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, Image processing system consisting of 5 million pixel B/W camera ( model number CA-H500M) and image processing controller (model number XG-X1500). The set includes cables and a white backlight (model number CA-DSW30). Type: Camera*1 Image pickup element:2/3" B/W CCD image receiving element, 11x high-speed square pixel capture, 5,050,000 pixel Cell size 3, 45 x 3, 45 µm Valid pixel count:4,990,000 pixels 2432 (H) x 2050 (V) Pixel transmission speed: 130 MHz (65 MHz x 2 channels) Scanning system: Full frame (61.2 ms), interlaced (40.3 ms) Transmission system: Digital serial transmission Electronic shutter: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0.05 ms to 9000 ms can be set with numerical values. Lens mount: C screw mount Ijdpfxomza Ils Addstb

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, For sale is a Cognex camera system for difficult OCR assembly verification and defect detection applications. The system never went into use and is being sold with all accessories as a set as shown in the pictures. The model number is IS7802-373-50-LAB // 821-10035-2R and is welcome to be researched on the internet. Digital Machine Vision Camera (2Mpixel) with PatMax RedLine + Gigabit Ethernet (GigE) - Demonstrator - COGNEX (In-Sight 7000 Gen2 Series) - 7802 - 1600x1200pixels UXGA resolution (1/1.8" CMOS monochrome scanning with global shutter) - 53fps - C-mount type / S-mount type - 7. 2GB (program; non-volatile flash memory) + 512MB (SDRAM) + 8GB (SD card) - 1 x digital input (15-28Vdc / optocoupler; isolated trigger input) + 3 x digital inputs (15-28Vdc / optocoupler; isolated discrete inputs) + 4 x digital outputs (26. 4Vdc 50mA / sink/source discrete outputs) - 8-pin M12 connector (Ethernet) + 5-pin M12 connector (supply) + 12-pin M12 connector (breakout) + Micro SD card slot - supply voltage 24Vdc - with RS-232C + Ethernet + PROFINET + CC-Link + Modbus TCP communication capability - IP67 - aluminum (die-cast) housing - compatible with Patmax redline Itsdpfxjmx Sl Te Addsb

Condition: used, optical angel measuring unit. Itedpfxjgw Tw Rj Addjb

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Itsdjxl Rgiepfx Addeb

Condition: excellent (used), Precision workshop micrometer from renowned German manufacturer Mahr, model Marameter M, designed for highly accurate measurement of external diameters in the range of 0–40 mm. The device is in very good condition, fully functional, and stored in its original wooden protective case. Specification: • Measuring range: 0 – 40 mm • Model: Marameter M Isdpfoxmlgtjx Addetb • Manufacturer: Mahr (Germany) • Catalogue number: 3206064 • Application: precise measurement of external diameters / shafts / cylindrical components • Durable metal housing • Arm with interchangeable measuring tips • High measurement stability and repeatability • Comes with the original wooden case Condition: • Used, very well preserved • Last calibration: 2023 • Ready for use in a measurement room or laboratory.

Condition: excellent (used), Professional outside micrometer from the renowned brand Mahr, designed for precise measurements in industry, workshops, and laboratories. The device features high accuracy and robust construction, while its large LCD display enables quick and convenient readout of results. . Measuring range: 25–50 mm / 1–2” . Resolution: 0.001 mm (1 µm) . Functions: ZERO, ABS, REL, TOL . Protection class: IP65 – dust and splash resistant . Power supply: CR2032 battery (3 V) . Ergonomic, precision design made of hardened steel . Clear LCD display . Catalogue number: 4157042 . Manufacturer: Mahr GmbH – Germany Included: . Mahr Micromar 40 EWR-S digital micrometer . Calibration standard . Adjustment key . Documentation and user manual . Original carrying case Device condition: very good – fully functional and ready for operation. An excellent choice for industrial plants, precision workshops, and measurement laboratories. Isdpfjxl Rf Ssx Addotb