Used Other drilling machines and boring mills for sale (63)

Year of construction: 1989, condition: excellent (used), 1 used centering drilling machine make Jones &Shipmann infinitely variable speed up to 1400 rpm drive 0,37 KW first class condition Gksdpfshg Ennjx Ag Njc

Condition: used, Year of construction: 1990, Type/Designation: 307-153/714-750 Serial Number: 82/293 Country of Manufacture: Made in West Germany (before 1990) Technical Data (approximate, for this type of CHIRON machine from the 1970s/80s): Machine Type: Column drill / single-station drilling machine for metal Motor Power: typically from 1.5 kW to 3 kW (three-phase, 380 V) Spindle Speeds: 100 – 4000 rpm (mechanically or electrically switched) Max. Drilling Diameter in Steel: approx. 20–25 mm (depending on the version) Spindle Taper: usually MT2 or MT3 Feed: manual or mechanical (some models equipped with automatic feed) Weight: several hundred kilograms (approx. 300–600 kg) Gksdpfx Asw T U Ubsg Njc Intended Use: serial production in industry (precise hole drilling, light milling operations in metals, use in production lines) Machine Table: cast iron, capable of securing workpieces Full control panel – variable speed adjustment available 2. Key Working Head Parameters (important for riveting): Press Force (kN) – if specified on the cylinder label or in the electrical box (often 10–30 kN for this size) Spindle/Slide Stroke (mm) – measure from top to bottom position Daylight (working clearance: distance between tool tip and table at top position) Throat Depth – from spindle axis to column (working reach) Max. Rivet Diameter / Work Range – specify based on tests or prior use Voltage: usually 380/400 V, 50 Hz 3. Dimensions and Logistics: L×W×H (of base/overall, in cm) Electrical Supply: 3×400 V, protection e.g. C16–C20 (indicate according to power rating) Weight (weigh with pallet jack with scale or estimate)

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 60176, New pneumatic self feed drill unit with 2 signal transmitters and their holders Gkedpsv Tnh Rofx Ag Nsc good for drilling or milling Speed (r.p.m. no load): 32,000 rpm Stroke: 40 mm dashpot: 15 mm Motor power: 0.25 kW Total length: 10.63 In. Operating pressure: 5.5 bar lubricated compressed air Suitable for collets (not included) with diameters of 3 to 8 mm Included are 2 signal transmitters (24 V DC, M8 connector, 5 m cable) and holders Other versions (speeds, stroke, etc.) are available upon request.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Equipment: lighting, rotational speed infinitely variable, type plate available, Out of insolvency: Erlo Iberdrill AZ 34 Year of construction 2020 Speeds infinitely variable via potentiometer 80-2010 rpm automatic feed 0,1--0,2--0,3 Digital speed display Coolant pump Thread cutting function with foot switch working light Pinol stroke 150mm throat depth 300mm Mounting MK 4 Röhm Supra 3-16mm drill chuck Gkodpfsrfxqljx Ag Nec Table clamping surface 330x320mm Height of the machine 1930mm Weight approx. 350kg 3KW power 380 Volt

Condition: repair required (used), Somex max 2 drilling unit Manufacturer: Somex Gksdpsd Huwgjfx Ag Njc Model: Max 2 Spindle retainer: Arbor pliers he 20 Rpm: 2820 *. Hz: 50 *. kW: 0.37 *. V: 220 / 380 *. A: 2.1 / 1.2 *. Motor data are not understandable and not readable! Probably similar data as for identical units.

Year of construction: 1988, condition: used, throat - mm tool adaptor - power requirement - kW 23 mm Godotqqkxopfx Ag Nokc spindle distance max. 400 mm 1200 U/min total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: ready for operation (used), machine/vehicle number: 13110506, Item number MA1165 Manufacturer Flott Type SB 10 Year of manufacture older Machine-No. 13110506 length [mm] 600 width [mm] 300 height [mm] 1500 Weight [kg] 70 Connected load 380V Gear [rpm] 400/4800 Gsdslz I Twepfx Ag Nekc Mounting MK 2

Year of construction: 1995, condition: used, bore capacity in steel (diameter) 50 mm throat 335 mm bore stroke 250 mm feed power max. 16 kN Gedpfx Ajwu Hg Teg Njkc spindle taper MK4 spindle motor 3 kW table surface area 850 x 450 mm travel -x axis 600 mm travel -y axis 300 mm travel -z axis 205 mm weight of the machine ca. 1,8 t dimensions of the machine ca. 1,618 x 1,802 x 2,520 m

Condition: new, functionality: fully functional, sheet thickness aluminum (max.): 25 mm, sheet thickness steel (max.): 20 mm, Fein KBH 25 metal core drilling system The world's first hand-held metal core drilling system, the FEIN KBH 25, combines the advantages of powerful hand drills and carbide-tipped core drills in one system. With significantly less effort, the new drilling technology enables high work progress, allowing you to work up to 5 times faster when core drilling. The FEIN KBH 25 also shows its strengths in tight, hard-to-reach places. A result of FEIN's many years of experience and enormous development lead as the inventor of the drill. Technical data: - Nominal power consumption 1,200 W - Power output 680 W - Load speed 0-520 rpm - max. drill Ø steel carbide core drill 14-25 mm - max. drill Ø aluminum carbide core drill 4-30 mm - max. drilling Ø steel HM hole saw 14-54 mm - max. corner dimension 27 mm - Weight 3.3 kg Scope of delivery: Metal core drill KBH 25, core drill Ø 18 mm incl. centering drill, additional handle, cutting spray, plastic tool case The core drill is new and unused. Only traces of storage may be present, as the machine was hanging in our showroom. Gkodpou R Dktofx Ag Nec You will receive an invoice with VAT shown. Payment: Prepayment by bank transfer - NO PAYPAL! If you have any questions, please do not hesitate to contact us.

Condition: good (used), ERLO SG- 18 tapping drill Gksdetrdimopfx Ag Njc CEE Table with casters Instruction booklet

Condition: new, Milling drill with gears Fervi T047/400VDA tapping 400V 1,5kW NEW MANUFACTURING " CE ". The machine can be used for the processing of: Milling Gkodeg Npiwepfx Ag Nsc Drilling Tapping. Drilling capacity on cast iron with pre-hole : ø 40 mm. Max. drilling capacity on steel with pre-hole: 32 mm dia. Milling capacity with insert cutter : 80 mm dia. Milling capacity : Ø 25 mm. Tapping capacity : Ø 22 mm. Conical shank : CM 4. Spindle stroke : 130 mm. Sleeve : ø 76 mm. Column : ø 115 mm. Head inclination : ± 60°. Spindle speed : (12) 75 ÷ 3200 rpm. Three-phase motor : 400 V 50 Hz 1,1 - 1,5 kW. Table dimensions : 585 x 190 mm. Keyway : 12 mm. Base dimensions : 648 x 412 mm. Overall dimensions: 740 x 790 x 1960h mm. Weight : 390 Kg.

Condition: good (used), Year of construction: 2003, NAGEL MODEL TBT M320-6 6 SPINDLE CNC HORIZONTAL GUN DRILL, 2003 Gjdpfx Agortrztj Nokc Equipped with: Panel Mate Power Pro Control Counter Rotation Cross Drilling High Pressure Coolant System Auto Loader Magnetic Chip Separator Hydraulic System Chiller Specifications: Maximum Drill Depth (Approx): 16" Maximum Drill Length: 36" Number of Drill Spindles: 6 Spindle Motors (3): 7.5HP HP Per Spindle: 3.75 Drill Head Slide Stroke: 16.9" Maximum Diameter Mild Steel: 0.750"

Year of construction: 2015, condition: excellent (used), CNC Travelling Column Horizontal Boring and Milling Machine Mitsubishi MAF180C Spindle Diameter: 180 mm Vertical Head Travel, Y-Axis: 5,000 mm Column Travel, X-Axis: 18,000 mm Ram Travel, Z-1 Axis: 1,250 mm Spindle Travel, Z-2 Axis: 1,000 mm Ram Cross Section: 420 mm x 420 mm Total Axial Travel: 2,250 mm Spindle Taper: ISO 50 Spindle Speeds: 6-2,500 RPM Equipped with: Fanuc 31iMB CNC Control 100-position Automatic Tool Changer Right Angle Milling Heads 4,000 mm x 4,500 mm CNC Infeed Table Floor Plates Gedpfx Aowbnqmsg Nokc Telescoping Steel Way Covers Operator's Platform 86 kW Spindle Motor