Used Other metal presses for sale (161)

Year of construction: 1991, condition: ready for operation (used), A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible. Iedow A R Spspfx Ag Noih

Condition: good (used), Year of construction: 1982, Strojarne Piesok LODD-50 press brake Iiodpfow Ua Ebox Ag Njh Year of manufacture: 1982

Year of construction: 2005, condition: used, SCHULER HYDRAP SH 630 - 1.6 x 1.3 (2005) Total weight 74,000 kg Rated force 6,300 kN Max. stroke length 600 mm Mounting height 900 mm Closes quickly 500 mm/s Max. working speed 23 mm/s Min. working speed 51 mm/s Base and tool max. (xH) 2,280 x 1,200 mm Base and tool min. (xH) 1,250 x 600 mm Tool height min. 300 mm Total tool weight max. 2,500 kg Iijdpfx Aewf D Shjg Noh Total tool weight max. 5,000 kg Permissible eccentric hydraulic press load left right Permissible eccentric load front rear 490 kNm 250 kNm Installed power 295 kW Rated current 565 A Voltage 400 V Frequency 50 Hz Operating hydraulic pressure 278 bar Total oil volume 5.185 l Oil type HLP 68 in accordance with DIN 51524

Condition: used, TECHNICAL DETAILS - Pressure : 2 - 125 [t] - Working speed : 0 - 7.6 [mm/sec] - Vertical rapid speed : 440 [mm/sec] - Compressor piston stroke : 0 - 130 [mm] - Upper extractor stroke : 15 [mm] - Passage between uprights : 404 / 104 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1500 x 1500 [mm] - Machine height : 2450 [mm] - Machine weight : 2300 [kg] MACHINE HOURS Iisdpfx Agew Ihtmj Njh - Number of hours under power : 35271 [h] EQUIPMENT - CNC : Siemens - Oil mist extractor : Elbaron RON/A 100 SV

Condition: used, COLLY Press Brake Capacity 3000 x 90T Distance between uprights 2600 mm Gooseneck depth 410 mm Working height 900 mm Max. distance between table and ram 420 mm Slide travel (Y1 / Y2) 200 mm Backgauge travel (X) 600 mm Approach speed 10 mm /s Iiodpfx Ajumlxvog Njh Working speed 9.3 mm /s Table width 90 mm Complete tooling 4-sided vee bending punch length 4000

Year of construction: 2019, condition: new, machine/vehicle number: DF0364, pressure:20 t passage width:500 mm stroke:250 mm Weight of machine approx.:2,6 t dimensions:1200 x 1400 x 2900 mm power capacity:11 kW Ijdpfxefxykzo Ag Noih table plate:450 x 400 mm Table cut-out:150 x 150 mm table height over floor:900 mm max. working heidht:500 mm Return Capacity:2 t Approach Speed:300 mm/sec pressure speed:50 mm/sec speed rapid traverse:300 mm/sec Travel:250 mm Oil Tank Capacity:250 l Oil cooling (electric):1,5 kW (max) Monitor:Siemens 10 Zoll

Condition: used, functionality: fully functional, Year of construction: 1991, We offer for sale a used hydraulic press from the manufacturer ACM - Inter Hydro (part of the SIF group). Technical data: • Model: DZ8024 • Year of manufacture: 1991 • Drive: Hydraulic • Equipment: Roller conveyor system for material feed, hydraulic control unit Iedpev Exxqofx Ag Neih Description: The DZ8024 is a robust hydraulic press, ideal for processing metals and other materials. Thanks to the hydraulic drive, it offers a high pressing force, while the roller conveyor system ensures efficient material feed. The machine is ideal for industrial applications such as the production of metal profiles, cutting or bending. Condition: The press is in working condition. Regular maintenance has been carried out and all relevant documentation is available.

Year of construction: 2025, operating hours: 10 h, condition: new, functionality: fully functional, machine/vehicle number: C1-25sE_1, CrimpOne C1-25sE - Made in Finland Servo-electric hose press with spindle drive Technical data Main technology: AC servo ball screw Max. pressing force: 250kN Crimp range: 10 - 54 mm Max. hose size: 1¼ inch Master die D / L: 84 / 78 mm Servo motor: 5kW Repeatability: 0.01 mm Max. opening: +100 mm Max. feed channel: 45 mm Max. closing speed: 80 mm/s Max. opening speed: 80 mm/s Max. crimping speed: 10 mm/s Length: 1250 mm Width: 850 mm Height: 2100 mm Weight: 700 kg Control: TC12 - Omron touchscreen Iijdpfjvr Dnksx Ag Noh

Condition: not inspected (used), Year of construction: 1961, machine/vehicle number: 64/61, Müller Weingarten press 1600 kN, pitch 8 ER 160 Year of construction 1961 Pressing force 1600 kN Maximum sheet thickness 14 mm Ram stroke 20-120 mm Ram adjustment 100 mm Iiodpfxsruahhe Ag Noh Stroke rate 45 / min

Condition: ready for operation (used), Parker 80C080 Hose press press with hose jaws No. 241 Hose sizes: 1/4 " - 2" Power: 3 kW Isdpfx Agolvrlks Neih You are welcome to come by for a visit. You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. Visit our store and see our other offers. Indicated company names and trademarks are the property of their owners and serve only for identification and description of the products. Deviations from technical data as well as errors in the description of the article can happen and remain reserved.

Condition: used, Year of construction: 2025, A universal arbor press made of high-quality cast iron. Products of this series provide great capabilities in one reliable and inexpensive device. Simple in handling in such processes as bushing, bending, straightening and reaming. Machine features Iijdpfx Agow Hxmco Neh For mounting and removing bearings, sleeves and pins High-quality cast iron Table adjustable in four positions Can be used in all workshops Technical data Pressing force 3 t Maximum workpiece height 285 mm Distance from piston axis to column surface 165 mm Table diameter 163 mm Arbor dimensions 38×38 mm Largest hole in the table 44 mm Height after arbor lowering 615 mm Base dimensions 455×300 mm Weight 65 kg NOTE: 100% COMPLETE, SIGNS OF CORROSION

Condition: used, Year of construction: 2018, functionality: fully functional, HPFS series are suitable for processing metal materials, such as stamping, bending, compressing and drawing metal sheet etc. It can also be used for straightening, pressing, plastic molding, balsa wood punching and sintered parts compacting. Nominal force 1000KN Max. working pressure of liquid 25Mpa Slider stroke 400mm Max. opening height 700mm Worktable size 1700 x 800mm Idle speed of slider 100mm/s Working speed od slider10-25mm/s Return speed of slider 30-80mm/s Height above floor 800mm Specification Unit Parameter Model No. HPHS-100T Nominal Pressure KN 1000 Iiodpfx Agoquqc Ie Njh Return force KN 320 Slide Stroke mm 400 Max. Opening Height mm 700 Slider Speed: -Downstream speed mm/s 100 -Pressing mm/s 10-25 -Return mm/s 30-80 Table Size: -L.R. mm 1700 -F.B. mm 800 Overall dimensions: -L.R. mm 2300 -F.B. mm 800 -Height above floor mm 3000 Servo motor Power KW 18.5 Voltage 400V, 50Hz, 3 Phase Total Weight app. T 12 Below attached drawing with tech. specification

Condition: good (used), We offer Becker scrap metal packer, ready to work. Dimensions of the packet 40cm/40cm. Supply voltage; 3F˜380 V 50Hz Connection power; 75 kW motor Work cycle; 48 seconds Iiedpfx Ajt Hfqfjg Nsh Capacity; 8-10 tons/h Feed chamber 130cm x 200cm x 76cm (depth) Machine equipped with: - heaters for hydraulic oil, - oil cooling system, - hydraulic oil level sensor, - hydraulic oil temperature sensor, - remote control for remote operation in automatic mode, - panel for operation in manual mode, - counter for made packages, .

Condition: not inspected (used), fustellatrice Iiedpfx Ageuau Sqs Njh

Condition: good (used), functionality: fully functional, total height: 1,480 mm, table height: 780 mm, installation height: 400 mm, total width: 1,730 mm, total length: 3,370 mm, throat depth: 400 mm, pressing force: 160 t, table width: 850 mm, operating speed: 30 mm/s, overall weight: 6,500 kg, reverse speed: 40 mm/s, stroke length: 500 mm, oil tank capacity: 210 l, pressing speed: 3 mm/s, Equipment: documentation/manual, Hydraulic horizontal box press PYXWM-160. Manufactured by WMW VEB Dessau - 1978. The machine has been overhauled. Ready to work. Max. pressing force 160 tons. Piston stroke 500 mm. Isdjwndnuopfx Ag Njih Piston speed: Forward 30 mm/sec Pressing 2.5 mm/sec Backward 40 mm/sec Height from base to center of piston 260 mm. Machine frame height 780 mm. Base length from support tool 600 mm. Support tool length 520 mm. Max. clamping width 1730 mm. Working clamping width 400 mm. Support tool height 400 mm. Support tool spacing min-max 240-1100 mm. Dimensions: Length 3370 mm. Width 1730 mm. Height 1480 mm. Frame width 700 mm. Engine power 11 kW. Oil tank capacity 210 liters.

Condition: ready for operation (used), Parker 80 CE 082 Hose press Crimping machine with hose jaws Power: 1.5 kW Jaw sizes: 1/2" ; 3/8" ; 3/4" ; 1" ; 1/4" You are welcome to come by for a viewing. Iedpfxju Hidko Ag Nsih We can also arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: good (used), For sale Special press 63 Ton Iiedpfjv Uxc Uox Ag Neh The price given in the advertisement is a net price to which VAT should be added

Condition: new, Year of construction: 2025, A universal arbor press made of high-quality cast iron. Products of this series provide great capabilities in one reliable and inexpensive device. Simple in handling in such processes as bushing, bending, straightening and reaming. Machine features For mounting and removing bearings, sleeves and pins High-quality cast iron Table adjustable in four positions Can be used in all workshops Technical data Pressing force 3 t Maximum arbor height (from fixed table surface) 310 mm Arbor reach 145 mm Iisdpfx Aev Hqfrog Nsh Fixed table dimensions 190×180 mm Swivel table dimensions Ø166×20 mm Holes in swivel table 18, 25, 36, 46 mm Arbor dimensions 38×38 mm Base dimensions 455×195 mm Height after arbor lowering 570 (without lever) Weight 63 kg Manufacturer: Cormak

Condition: good (used), We offer Riko S-26 parcel machine for scrap metal after renovation, ready to work. Package dimensions 30x30 cm. Supply voltage; 3F˜380 V 50Hz Connection power; 50 kW Work cycle; 45 seconds Capacity; 5-7 tons/hour Feed chamber; 120 cm x 135 cm x 66 cm (depth) Machine equipped with: - heaters for hydraulic oil, - oil cooling system, - hydraulic oil level sensor, - hydraulic oil temperature sensor, - remote control for remote operation in automatic mode, - panel for operation in manual mode, - counter of made packages, Isdjq H Sdkspfx Ag Noih - new hydraulic pumps, - new distributors, - new automation control system,

Condition: ready for operation (used), Hertweck P4 hydraulic press stamp press You are welcome to come by for a viewing. Iijdpfxjvux Spj Ag Nsh We are happy to organize a cost-effective shipping company for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and take a look at our other offers. The company names and trademarks given are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article can occur and are reserved.

Condition: used, Year of construction: 2009, For sale 200 ton press brake Iiedpfx Aov Uxvbog Njh The price given in the advertisement is a net price to which VAT should be added

Condition: new, Year of construction: 2025, A universal arbor press made of high-quality cast iron. Products of this series provide great capabilities in one reliable and inexpensive device. Simple in handling in such processes as bushing, bending, straightening and reaming. Machine features For mounting and removing bearings, sleeves and pins High-quality cast iron Table adjustable in four positions Can be used in all workshops Iisdpfov Hqdhjx Ag Njh Technical data Pressing force 3 t Maximum workpiece height 285 mm Distance from piston axis to column surface 165 mm Table diameter 163 mm Arbor dimensions 38×38 mm Largest hole in the table 44 mm Height after arbor lowering 615 mm Base dimensions 455×300 mm Weight 65 kg Manufacturer: Cormak

Year of construction: 2001, condition: good (used), For sale 200 ton press brake Iiodpov Uxu Djfx Ag Nsh The price given in the advertisement is a net price to which VAT should be added

Condition: good (used), For sale PHK-01 press brake Iiedsv Uxibopfx Ag Noh The price given in the advertisement is a net price to which VAT should be added

Condition: good (used), Year of construction: 1995, For sale Special press 100 tons Isdpfxjv Uxuqj Ag Njih The price given in the advertisement is a net price to which VAT should be added