Used other metal presses for sale (149)

Condition: used, Press-fitting device for ceramic pins in rotor shafts Operating principle: Nwjdpfx Asib H U Debujn The ceramic pins are fed to a testing station via a vibrating feeder and a pneumatic hose, where the position of any existing one-sided bore is checked. This is done using an optical sensor. Incorrectly positioned parts are conveyed to a collection container by a pneumatic slide. Correctly positioned pins are fed to the singulator of the press-fitting tool via another pneumatic hose. The actual press-fitting process is also carried out pneumatically with a roller bearing-guided plunger. First, a manually adjustable pressure p1 is used to ensure that the pin is not pressed too easily into the shaft. Then, with another manually adjustable pressure p2, the pin is pressed fully into the rotor shaft. A disk spring pack preloaded with 5,000 N prevents excessive force from being exerted on the pin and shaft. The rotor shaft must be manually inserted, removed, and clamped into the tool by an operator. This process is secured by a light curtain. Design Self-supporting station, integrated into a complete system, for press-fitting ceramic pins and balls. Rotor shafts Diameter: 5 - 20 mm Length: 50 - 200 mm Ceramic pin Diameter: 3 mm Length: 5 +/- 0.2 mm Operating cycle Performance: 15 cycles per minute Safety Protective door with safety switch Light curtain, category 4 Emergency stop Airborne noise emission Continuous sound pressure level at the workplace: 70 dB (A) Electrical connection Voltage: 230 V AC Frequency: 50 Hz Fuse: 10 A Compressed air connection Operating pressure: 5 - 7 bar Dimensions L x W x H = 850 x 950 x 1020 mm Weight: approx. 110 kg Year of manufacture: 2003 Electrically adjustable work table Documentation and circuit diagrams are available. More press-fitting devices – new and used – can be found in our shop! International shipping costs available on request!

Condition: used, Year of construction: 1991, Offered for sale: Hydraulic CNC press brake with 5-axis backgauge. Bending length: 3060mm. Pressing force: 1300kN, max. stroke: 215mm, max. operating pressure: 340bar, usable installation height: 385mm. Inspection possible by arrangement. Nwodpoz Rn D Ijfx Abusn

Year of construction: 2001, condition: excellent (used), Quality used Trumpf Trumatic 500R CNC Punch Press for sale Nwjdpfx Ajh Nf Upobujn A late Trumpf 500 just before the 5000r 2.5metre x 1250mm sheet metal before reposition 1300mm throat New / Year 2001 Fully serviced With manuals Good condition and be seen working in production Complete with: · Capable of taking multi tool a good selection of tooling available along with multi tools

Condition: good (used), Table press Storage number: Year of manufacture: 1986 Machine number: 599 Manufacturer: Robotron Dresden Press type: PETSe 0.5 Type: 2-column table press Table area: 280 x 280 mm Overhang: 55 mm Pressing force: 0.5 t Distance table – ram: 60 to 220 mm Njdpjzvw R Aefx Abuown Stroke: approx. 10 to 20 mm Column passage: 90 mm Dimensions: 340 x 500 x 600 mm Features: Single and continuous stroke, 2-hand operation Condition: good, ready for use Weight: 69 kg

Year of construction: 2019, condition: like new (used), functionality: fully functional, Technical Specifications * Machine Type: Cortazar Press * Pressure: 5000 ton/m² * Useful Dimensions: 4700 × 1820 mm * Number of Cylinders: 10 * Plate Type: Pre-drilled stainless steel plates with vacuum system * Press Opening: 300 mm * Cylinder Diameter: 500 / 480 mm * Number of Plates: 2 * First Height: 1370 mm * Last Height: 1570 mm Njdpfxoyt Rf Ao Abuswn * Total Force: 5000 tons * Filter Belt: Yes * Integrated Water Tank: Yes * Loading and Unloading System: Automatic * Overall Dimensions: 5355 × 2500 mm * Usage: 546 pressing cycles

Condition: used, There are three May MKN1-100/6 toggle-type presses available, ram stroke: 60mm, pressing force: 100t, ram strokes: 60/min, flywheel speed: 620rpm, distance between bolster plate and ram, stroke at bottom/adjustment at top: 265mm, ram adjustment: 30mm, table surface: 640x404mm, ram surface diameter: 300mm, drive power: 5.5kW, operating voltage: 3~/380V, frequency: 50Hz, control voltage: 220V, lighting voltage: 220V, rated current: 17A, supply fuse: 25A, overhaul: 1984, an on-site inspection is possible. Nodjz D Hzdepfx Abuewn

Year of construction: 2016, condition: ready for operation (used), Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible. Nwjdoxq Exwepfx Abusn

Year of construction: 2005, condition: ready for operation (used), overall weight: 9,500 kg, total width: 1,700 mm, total height: 2,300 mm, pressing force: 102 t, product length (max.): 3,800 mm, number of axes: 8, CNC Hydraulic Press Brake manufactured in 2005. This GASPARINI X-Press 100 features a press force of 100 t and a bending length of 3,100 mm. It is equipped with a Delem DA60 control and a dynamic hydraulic crowning system for enhanced precision. If you are looking to get high-quality bending capabilities, consider the GASPARINI X-Press 100 machine we have for sale. Contact us for further details regarding this machine. Nedpfjzypi Ejx Abujwn • Ram stroke: 300 mm • Tool clamping: Promotec pneumatic system • Hydraulic crowning: Dynamic hydraulic crowning of the lower table • Axes: Y1, Y2, X, R, Z1, Z2, X1, X2 (8 axes) • Oil seals: Replaced • Oil: New • Warranty: Included • Condition: Machine guaranteed / ready for sale Technical Specification Bending Length 3100 mm

Year of construction: 2018, condition: ready for operation (used), A roller press (briquetting press) Köppern Maco is available. Production capacity: 10 MT/h, roller diameter: 720mm, roller width: 315mm, briquetting shapes: bolted segments, motor type: Siemens electric motor, motor power: 190kW, gearbox type: spur gear, machine dimensions X/Y: approx. 5000mm/5000mm, weight: approx. 15000kg, control: Siemens S7-300 Simatic. Including two new segment sets and one installed segment set. Documentation available. On-site inspection is possible. Nwsdpfx Aou Dal Hebuon

Year of construction: 2023, condition: ready for operation (used), total width: 1,800 mm, total height: 2,700 mm, pressing force: 143 t, product length (max.): 4,000 mm, Hydraulic press manufactured in 2023. This GIZELIS G-FLEX 3140 features a pressing force of 140 tons and a working length of 3,100 mm. It includes a maximum bending thickness of 6 mm and a throat depth of 400 mm. If you are looking to get high-quality bending capabilities, consider the GIZELIS G-FLEX 3140 hydraulic press we have for sale. Contact us for further details. • Type: CNC hydraulic press brake • Working length: 3,100 mm • Max bending thickness: 6 mm at 3 meters • Distance between uprights: 2,550 mm • Throat depth: 400 mm • Daylight opening: 515 mm Nwsdpfx Abey E I Adeuon • Punch stroke: 250 mm • Table width: 80 mm • Fast approach speed: 0–180 mm/s • Working speed: 0–20 mm/s • Return/upstroke speed: 0–160 mm/s • Max hydraulic pressure: 275 bar • Main electric motor power: 15 kW • CNC control: CybTouch 15 PS (15" touchscreen, 2D programming, automatic bend sequence detection) • Axis configuration: Rear gauge with 2 controlled axes (X + R) Additional equipment • Two heavy-duty front support arms • Front guides movable longitudinally • Adjustable-height front supports • Laser safety system AKAS-LC • EU-compliant operator safety system • Pneumatic folding/hemming table • Mechanical grip for lower tools • Tooling included: • Punch: Knife P120.35.R08, height 120 mm, angle 35°, radius R0.8, sections 3 x 835 mm + 1 x 805 mm • Bottom die/block: Model M460.R, V openings 16/22/35/50 mm, sections 3 x 835 mm + 1 x 805 mm, suitable up to 6 mm sheet metal

Year of construction: 2005, condition: used, Working length: 3100mm, pressing force: 2500kN, max. stroke: 465mm, rapid down speed: 190mm/s, working speed: 10mm/s, rapid return speed: 150mm/s, machine weight: 18t. Machine control retrofitted to Cybelec approx. 5 years ago. Safety control completely renewed in July 2026, new Siemens components installed in the control cabinet. Inspection possible by arrangement. Nsdpfx Aezun T Ssbuown

Condition: as good as new (ex-display), Year of construction: 2024, pressing force: 80 t, Equipment: documentation/manual, YAWEI SKE1-80 Precision Servo Press – 800 kN / 80 t - Stock Machine - Demo Machine - Available immediately For sale is a YAWEI SKE1-80 precision servo press from the manufacturer Jiangsu Yawei Machine Tool. This servo press is suitable for precise punching, forming, and pressing operations and, thanks to the servo drive, allows for freely adjustable motion and pressing curves. Speed, position, and the pressing process can be controlled precisely. Nwodpfszyamzjx Abujn Manufacturer: YAWEI / Jiangsu Yawei Machine Tool Model: SKE1-80 Pressing force: 800 kN / approx. 80 t Ram stroke: 150 mm Idle stroke rate: max. 65 strokes/min Working stroke: 6 mm Max. tool installation height: 330 mm Ram adjustment: 80 mm Ram area: 560 × 460 mm Table area: 1,000 × 600 mm Table thickness: 120 mm Operating pressure: 0.55 MPa Peak torque: 4,000 Nm Drive: Servo motor / Gear drive

Year of construction: 1976, condition: used, Year of manufacture: 1976, overhauled: 2003 Nwodozmh Rhopfx Abusn Maximum pressing force: 500 KN, Maximum extraction force: 400 KN, Maximum holding force in the pressing position: 400 KN, Maximum die return force: 20 KN, Upper punch stroke: 120 mm, Upper punch section: 220 mm, Number of strokes: 7-32 1/min, Maximum filling height: 180 mm, Maximum pressing stroke: 90 mm, Maximum extraction stroke: 90 mm, Maximum pressing stroke: 12 mm, Pneumatic upper punch tension: Maximum: 100 mm, Compressed air supply, Air consumption, Intake air: 200 1/min, Total connected load: 18.00 kW, approximate width: 2000 mm, approximate depth: 1700 mm, approximate height: 3250 mm, press weight (approximate): 5,500 kg, press housing: 190 l (running oil), operating noise: 78 dB (A)

Year of construction: 1987, condition: used, Control: Cybelec DNC 600S. Inspection by appointment possible. Nwsdpfx Asz Dkkcebuon

Year of construction: 2018, condition: ready for operation (used), This MILLUTENSIL MIL 163 was manufactured in 2018. A robust hydraulic press with a table size of 2000 mm by 1200 mm, it can handle a maximum load of 5000 kg and exerts up to 163 tons of pressure. Ideal for applications like mold adjustment, injection molding, and die casting. Control is manual or semi-automatic. Contact us for more information. Additional information • Axis Travel: Pressing axis: 1 (vertical) • Maximum Pressure: 163 tons Njdex D Rlijpfx Abuown • Table / Bed Dimensions: Length 2000 mm / Width 1200 mm • Maximum Load Capacity: 5000 kg • Machine Weight: 6000 kg • Applications: Mold adjustment and testing, injection molding, die casting, rubber molding

Condition: used, Year of construction: 1998, Press force: 3500 t Nedpszypa Refx Abuewn Stroke: 900 mm Frame width: 3200 mm Side frame opening: 2200 mm Shut height (stroke up): 1700 mm Table area: 3150 x 2150 mm Table height above floor: 500 mm Ram area: 3150 x 2400 mm Downstroke speed: 400 mm/s Upstroke speed: 210 mm/s

Condition: used, Year of construction: 1999, 5-STATION HYDRAULIC PRESS, FISCHER PRESSURE: 5 x 80 tons TABLE DIMENSIONS: 800 x 560 mm Njdpfjz A Aw Esx Abuown STROKE LENGTH: 500 mm

Year of construction: 1995, condition: ready for operation (used), overall weight: 52,000 kg, total width: 5,100 mm, total height: 5,170 mm, pressing force: 204 t, product length (max.): 1,750 mm, table length: 800 mm, table width: 3,800 mm, Hydraulic press manufactured in 1995. This EXNER EX SBR 200 features a pressing force of 2000 kN and a drive power of 78 kW. With an oil capacity of 1400 liters and a weight of 52000 kg, this machine is designed for robust performance. If you are looking to get high-quality pressing capabilities, consider the EXNER EX SBR 200 hydraulic press we have for sale. Contact us for further details. Nwsdpfx Abozxz Spoujn - Pressing Force: 2000 kN- Drive Power: 78 kW- Overtravel Distance: 56 mm- Safety Distance: 235 mm- Overtravel Time: 147 ms- Max. Ram Stroke: 700 mm- Distance Between Columns: 3830 mm- Installation Height: 1200 mm- Ram Diameter: 240 mm- Number of Ram Cylinders: 2- Table Bed Depth: 800 mm- Table Bed Width: 3800 mm- Clamping Plate Thickness: 150 mm- T-Slots Configuration: 8 slots, 28 mm slot width, 650 mm spacing- Total Connected Load: 90 kVA- Total Power Requirement: 77.48 kW- Voltage: 400 V- Frequency: 50 Hz- Main Motor 1 (VEM 250 M4): 55 kW, 1475 rpm- Motor 2 (VEM 132M4): 7.5 kW, 1435 rpm- Motor 3 (VEM 100Lx4): 3 kW, 1430 rpm- Motor 4 (VEM 132S4): 5.5 kW, 1440 rpm- Motor 5 (VEM 132S4): 5.5 kW, 1440 rpm- Motor 6 (ZG1KMR63G4 VEM): 0.37 kW, 40 rpm- Oil Cooler Motor (Oiltec TB/33-6): 0.55 kW, 1000 rpm- Lubrication Pump Motor (Woerner GMA-B): 0.06 kW- Press Oil Tank Capacity: 1400 liters (ISO VG 46)- Hand Lubrication Pump Capacity: 1.5 liters (Shell Alvania EP2)- Motor Lubrication Pump Capacity: 2 liters

Year of construction: 1985, condition: used, Max. pressing force: 150t, bending length: 4050mm, backgauge: 750mm, control: Cybelec CNC 7200 P, weight: approx. 15t. Equipped with hydraulic tool clamping, crowning system, height-programmable backgauge, two control panels and two pneumatic bending aids. Including stand with various upper tools and dies as well as various special accessories manufactured in-house. Documentation available. An on-site inspection is possible. Nedpfx Aszx Ehbsbuown

Year of construction: 1998, condition: ready for operation (used), pressing force: 102 t, number of axes: 4, This 4-axis Warcom UNICA 100-40 hydraulic press was manufactured in 1998. It features a press force of 100 t and a bending length of 4,000 mm, making it suitable for various bending applications. The machine is equipped with a Promecam tooling system and ESA S530 CNC control. If you are looking to get high-quality bending capabilities, consider the Warcom UNICA 100-40 machine we have for sale. Contact us for further details. • Tool clamping/tooling system: Promecam • CNC control: ESA S530 • Condition: Overhauled/revised, ready for operation Nsdpszypubsfx Abuewn Additional equipment • Laser Safe safety system Technical Specification Bending Length 4000 mm

Year of construction: 1997, condition: ready for operation (used), A transfer press line is offered, consisting of a Gräbener double-column transfer press including a feed unit and a Fecker decoiler-straightener combination with strip feed. 1) Gräbener GSET 2-250-280-315 double-column transfer press, year of manufacture: 1997, condition: operational, nominal force: 2500kN, nominal force stroke: 5mm, nominal energy capacity: 45kJ, slide stroke: 315mm, max. stroke rate: 50strokes/min, slide adjustment: 125mm, number of connecting rods: 2, shut height between bolster and slide: 800mm, bolster dimensions X/Y/Z: 2800mm/1150mm/200mm, slide area X/Y: 2800mm/900mm, max. die cushion stroke: 160mm, die cushion force: 88kN, machine dimensions X/Y/Z: approx. 5200mm/2700mm/5450mm, dimensions including sound enclosure X/Y/Z: approx. 7200mm/4700mm/5610mm, weight: approx. 55000kg. 2) Feed unit, condition: partially operational. 3) Fecker decoiler-straightener combination with strip feed, max. load capacity: 3000kg, max. coil outside diameter: approx. 1500mm, strip pass line height: approx. 1240mm, overall height: approx. 2740mm, width of the decoiler section: approx. 1680mm, length of the strip transfer table: approx. 3500mm. Documentation available. Inspection possible by arrangement. Nwjdpfx Aozrhhqobusn

Year of construction: 1984, condition: ready for operation (used), Press force: 200t, working length: 3550mm, distance between columns: 3050mm, length: 4000mm, width: 2000mm, height: 3000mm, weight: 16t. The machine is fully functional and in good technical condition. Upper tools are included. The lower tool, consisting of the die block or prism, is missing. An on-site inspection is possible. Nodpozrn H Hsfx Abujwn

Year of construction: 1994, condition: used, Pressing force: 2250kN, max. working length: 4100mm, approach speed: approx. 150mm/s, max. working speed: 10mm/s, max. ram stroke: approx. 215mm, max. throat depth: approx. 380mm, distance between uprights: approx. 3600mm, table width: 100mm, working height: approx. 1080mm. Machine dimensions: approx. 5100mm/2000mm/3000mm, machine weight: approx. 15.5t. An on-site inspection is possible. Nwodpfx Aezun T Eebuon

Year of construction: 2019, condition: ready for operation (used), Pressing force: 4000kN, stroke: 300mm, table dimensions: 3100x1400mm, controls: Siemens S7, length: 4560mm, width: 2045mm, height: 4605mm, weight: 65t, with transfer system and soud-proof cabin. Nodpfolyr Adsx Abujwn

Year of construction: 1986, condition: used, COFMO Press KD2330 Manufacturer COFMO Type Eccentric Mechanical Press Industrial Applications Stamping, punching, cold forming, and sheet metal processing in production workshops. Main Technical Specifications: - Nominal Force: 101.97 tons (1,000,000 N) - Model: KD2330 Nwedpfx Aoxlcxkebusn - Year: 1986 - Strokes per minute: 95 - Slide Adjustment: 100 mm - Working Voltage: 220 – 380 V - Air Pressure Requirement: 5 atm - Weight: 8,000 kg 🧩 Machine Usage The COFMO KD2330 102-ton press is designed for intensive sheet metal operations such as stamping and forming. It is ideal for high-speed, high-force applications in industries like metalworking, automotive parts manufacturing, and tooling. ⚙️ Features / Differentiators With its 95 strokes per minute and nearly 102 tons of force, this machine combines speed and power. The dual-voltage compatibility (220/380V) and pneumatic system make it highly adaptable for various industrial setups. Strength: 101.97T Strokes/min: 95 Weight: 8000Kg