Condition: new, Year of construction: 2025, machine/vehicle number: 30765, BELT HAUL-OFF BASE.2 - new machine from IDE-stock programme - Extrusion height preset to 1,100 mm - External height adjustment with 4 threaded spindles Cgobvbowcaqhokfrot - Base frame 2.0 m long, welded tubular frame - Driven by 2 AC motors 0.55 kW each (rated-power at 50Hz) * operation at 87Hz = 0,96 kW each - Pull-off speed 1.0 to 10 m/min - Pull-off force max. 5.360 N - Contact length approx. 1,000 mm - Pneumatic track clamping * Weight compensation of the upper caterpillar carrier * Adjustable stop for mechanical limitation mechanical limitation of the track clamping * Equalising tank for compressed air supply - 2 transport belts 200 mm wide * Hardness approx. 40 Shore A - Protective panelling with sliding door, limit switch protected * with inlet and outlet protection channel, 500 mm long - Profile guide rollers on infeed side, adjustable - Analogue operation, integrated in the control cabinet

Condition: excellent (used), Volumetric K-Tron dosing with Ruhrwerk and auger Cobvjrvxn Ijbkfregt - Suitable for powder and granulate - Screw diameter: 35 mm

Condition: good (used), Year of construction: 2006, operating hours: 62,149 h, Functionality: fully functional, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 510 cm³, injection pressure: 1,615 bar, total length: 6,800 mm, total width: 1,800 mm, total height: 2,400 mm, overall weight: 12,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, injection moulding machine ENGELVictory 1050-220 TECH Cgebvbkfjv Hw Tvjrjt warehouse no.: 503559 manufacturer: ENGEL type: Victory 1050-220 TECH controller: CC100 year of construction: 2006 operation hours: 62149 h technical data clamping unit clamping force: 2200 kN size of mould plates h x v: 860 x 830 mm min. mould height: 300 mm max. open daylight: 1045 mm opening stroke: 755 mm ejector stroke: 180 mm ejector force: 80 kN centering diameter of moving platen: 160 mm centering diameter of fixed platen: 160 mm technical data injection unit screw diameter: 55 mm swept volume: 510 ccm injection pressure: 1615 bar screw length: 20 l/d screw stroke: 200 mm screw speed: 230 min plasticising rate: 55 g/s PS injection rate into the open: 255 g/s PS number of heating zones: 5 nozzle stroke: 350 mm measures & weight measures of machine l x w x h: 6.8m x 1.8m x 2.4m total weight: 12900KG equipment included screen text german machine incl. Handling Anti vibration mounts technical data robot-system handling type: Linear manufacture: ENGEL controller: ER-HLI 61

Condition: good (used), Year of construction: 2022, Functionality: unexamined, machine/vehicle number: 1A08052, clamping force: 3,430 kN, screw diameter: 60 mm, clearance between the columns: 810 mm, displacement volume: 763 cm³, injection pressure: 220 bar, mold height (min.): 300 mm, ejector force: 60,000 N, ejector stroke: 270 mm, plate length: 770 mm, plate width: 770 mm, plate height: 700 mm, total length: 8,070 mm, total width: 1,930 mm, total height: 2,400 mm, heating capacity: 27.5 kW (37.39 HP), pressure: 200 bar, power: 85.6 kW (116.38 HP), type of input current: three-phase, Electric injection molding machine from Japan's TOYO Machinery & Metal CO. LTD. Model: Si-350-6S/JH750E (L/D 24) PACK version The PACK series is dedicated especially to packaging production. Basic data: Installed heating power: 27.5kW Total installed power: 85.6kW Control: SYSTEM 800, interface Euromap 67, Euromap 73 Total external dimensions L/W/H: 8073mm x 1930mm x 2397mm Short-circuit force: 3430kN Spacing between columns: 810mm x 810mm Table dimensions: 1050mm x 1050mm Table opening stroke: 700mm Mold height min/max: 300mm / 770mm Ejector stroke: 150mm Ejector force: 60.0kN Auger diameter: 60mm Injection speed: 300mm/s Injection pressure: 220MPa Compression pressure: 200MPa Theoretical injection volume: 763cm3 Injection: 848cm3/s PS injection capacity: 210kg/h Screw speed: 0-350rpm Injection stroke: 270mm Cjbvbetwcdfokfregt Nozzle clamping force: 39.0kN

Condition: like new (used), Year of construction: 2018, operating hours: 17,000 h, Functionality: fully functional, machine/vehicle number: 222866, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,120 cm³, Cleanroom machine only used PP 300 tons, screw diameter 70 mm Barrier screw with homogenizer and mixing head Only 1,700 operating hours Only used PP Cgobvswb Dywebkfret

Condition: excellent (used), Year of construction: 2000, operating hours: 46,000 h, Functionality: fully functional, machine/vehicle number: 180316, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, Fully functional plastic injection molding machine with associated documentation and diskettes. Cgsbvbev N D Raokfrst The machine operated in clean production. The machine was injection molded with LDPE material, so the tip and screw are in first-class condition. Every 2 years, the pressures were checked and confirmed by an Arburg authorized service.

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 1560 mm Cgsbvbov Rr Ntekfrjt Measurements depth 5980 mm Measurements height 2190 mm Machine weight 8900 kg Clamping Unit Clamping force 1900 kN Additional Equipment Air valves: 2 This HAITIAN ZHAFIR ZERES ZE1900 was manufactured in 2018. It is an electrical injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this HAITIAN ZHAFIR ZERES ZE1900 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Functionality: fully functional, 1. Manufacturer: Bosch Type: 0811404666 + 1817414313 Price: 1200 EUR Cjbvsv Up Tqobkfrsgt 2. Manufacturer: Bosch Type: 0811402114 Price: 1000 EUR 3. Manufacturer: Rexroth Type: 0811402114 5WRPE 10 F1B 70L Price: 1000 EUR 4. Safety valve Manufacturer: Mannesmann Rexroth Type: LS 1171 X 168-20/CG24K4 Price: 300 EUR

Condition: excellent (used), Year of construction: 2007, operating hours: 68,000 h, Functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 154 cm³, injection pressure: 1,600 bar, total length: 5,100 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 7,300 kg, Equipment: documentation/manual, injection moulding machine ENGEL Victory 330-120 Tech warehouse no.: 503558 manufacturer: ENGEL type: Victory 330-120 Tech controller: CC100 year of construction: 2007 operation hours: 68000 h technical data clamping unit clamping force: 1200 kN size of mould plates h x v: 740 x 470 mm min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 500 mm ejector stroke: 130 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 825 kg technical data injection unit screw diameter: 35 mm swept volume: 154 ccm injection pressure: 1600 bar screw length: 20 l/d screw stroke: 160 mm screw speed: 400 min injection rate into the open: 151 g/s PS number of heating zones: 4 nozzle stroke: 250 mm measures & weight Cebvov Hp S Rjbkfrsgt measures of machine l x w x h: 5.1m x 1.5m x 2.1m total weight: 7300KG equipment included screen text german Anti vibration mounts technical data robot-system handling type: Linear manufacture: ENGEL controller: ER-HLI41VC year of construction: 2007

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 61014832, clamping force: 4,200 kN, screw diameter: 80 mm, clearance between the columns: 800 mm, plate width: 1,230 mm, plate height: 1,270 mm, power: 75 kW (101.97 HP), We offer you Krauss-Maffei 420-3000 CH injection molding machine. Dimensions of the mounting plate (H x W) [mm] 1270 x 1230 Clearance between columns (hxv) [mm] 800 x 800 Minimum max. mold height [mm] min 580mm Maximum opening width [mm] 1600 Rated power of pump motor [kW] 75 Rated power of barrel heating [kW] 29 Dimensions and weight (approximately) Own weight with control cabinet [t] 22.3 Dimensions (L x W x H) [m] 7.32 x 2.49 x 2.38 Machine disassembled, deposited in storage. In addition: WITMANN DFR-10 workpiece pickup robot (2010). MOTAN plastic feeder Cobvbkferdfyhorjgt

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, Functionality: fully functional, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, Fully equipped from the clean room Only PP used. Screw like new. Cgobvbkfjwb Dl Terot

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, Model: KM 800/6100 MC Year of Manufacture: 2001 Clamping Force: 800 tons Control System: MC4 Machine Description: White-yellow, hydraulic locking mechanism Installed Power: 254 kW Mold Opening Stroke: Max. 2000 mm Mold Height: Min. 600 mm Distance Between Tie Bars: 1120 mm (horizontal) x 1000 mm (vertical) Platen Size: 1600 mm x 1510 mm Screw Diameter: 105 mm, Type HPS-M Cobvbjrw A Ukekfrogt Injection Pressure: Max. 1469 bar, with a maximum shot weight of 3743 g (PS) Robot Interface: Equipped with a Wittmann robot Core Pulls: Freely programmable, 2 Hot Runner Control: 8 zones Cooling System: Stäubli cooling battery connection Screw Drive Unit: Hydraulic Gravimetric Mixer This machine has been well maintained and is ready for immediate use. The machine is sold as seen, with no warranty. Prospective buyers are encouraged to inspect the machine in person.

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 1200 mm Measurements depth 3610 mm Measurements height 1750 mm Machine weight 2800 kg Clamping Unit Clamping force 400 kN Ejector stroke 60 mm Cobvbkfev Rr Nysrjgt This HAITIAN ZHAFIR Zeres ZE400 was manufactured in 2017. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this HAITIAN ZHAFIR Zeres ZE400 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2012, operating hours: 34,528 h, Functionality: fully functional, Equipment of the system: - Unwinding stand ILLIG RO 800 B - ILLIG VHW 90/2 preheater - Thermoforming machine ILLIG RDM 70K - Stacking ILLIG SZS 73 - ILLIG RS 75b granulator - Conveyor belt from Frei Fördertechnik type GF0500 built in 2015 Servo top punch with 150 mm drawing depth. Additional pump for ejector and, if necessary, hold-down device with direct connection to the customer's central cooling system or a cooling unit as well as additional volume flow display for upper and lower moulds Technical data Moulding area max. - 700 x 450 mm Moulded part height max. - 150 mm Foil width max. - 750 mm Max. feed length - 480 mm Mould clamping force max. - 40,000 daN Cutting length max. - 8400 mm Idle speed - 30 min-1 Csbvbksvuq T Sjfrjgt Electrical connected load of top and bottom heating - 111.3 kW Electrical connected load of the motors - 10.5 kW Electrical connected load with top and bottom heating - 121.8 kW Compressed air requirement/cycle at 6 bar/min Basic machine - 400 litres Length of the machine with film roll and stacking, counting and ejecting device - 9875 mm Total height ( basic machine ) - 3500 - 3700 mm Total weight - 11,000 kg

Condition: good (used), Year of construction: 2005, operating hours: 76,679 h, Functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,450 bar, total length: 4,050 mm, total width: 1,930 mm, total height: 2,100 mm, overall weight: 5,200 kg, Equipment: documentation/manual, injection moulding machine ENGELVictory 200-80 Tech warehouse no.: 503561 manufacturer: ENGEL type: VICTORY 200-80 Tech controller: CC 100 year of construction: 2005 operation hours: 76988 h technical data clamping unit clamping force: 800 kN size of mould plates h x v: 670 x 600 mm min. mould height: 250 mm max. open daylight: 700 mm opening stroke: 450 mm ejector stroke: 100 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 675 kg technical data injection unit screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar screw length: 20 l/d screw stroke: 140 mm plasticising rate: 17 g/s PS injection rate into the open: 150 g/s PS number of heating zones: 4 nozzle stroke: 200 mm measures & weight measures of machine l x w x h: 4.05m x 1.93m x 2.2m total weight: 5200KG Cgjbvbkfjv Hpufjrot equipment included screen text german CEE-socket 16A core pulling hydraulically 1x machine incl. belt conveyor machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A technical data robot-system handling type: Linearhandling manufacture: Engel controller: ER-HLI 31 VC year of construction: 2005 handling weight: 2 kg screen-text: deutsch total weight: 250 kg

Condition: good (used), Year of construction: 2009, Bürck + Lang underfloor saw with automatic feed, profile clamping device, lateral adjustment options for the cutting width, fully functional Cobvjwb H T Tebkfrogt

Year of construction: 2006, Condition: excellent (used), Spritz Clinder Bareire Csbvbked N Ak Dofrsgt Bj ca2006 Long 130 cm Scrow 35 mm

Condition: reconditioned (used), Year of construction: 2004, operating hours: 35,000 h, Functionality: fully functional, clamping force: 2,600 kN, screw diameter: 60 mm, Engel Victory 1800/260 Tech Engel Horizontal Injection Molding Machine, 260 tons of closing force. Servo motor. CC100 control. Only 35,000 operating hours. Extras: Engel ERC 53/1-E robot + safety grille. 60mm intermediate plate. The injection molding machine is delivered reconditioned by our expert technical team and in optimal working condition. We can offer our clients a commissioning service at their facilities, guaranteeing its operation. Technical Details INJECTION PRESSURE 2361 (increased) PLATE DIMENSIONS 1100x1000mm SCREW 60mm INJECTION VOLUME 764cm3 CLAMPING POWER 2600kN OPENING STROKE 908mm WORKING HOURS 35,000 Cobvbkswdvm Uefrjgt MINIMUM MOLD THICKNESS min 400/ max 900 YEAR OF MANUFACTURE 2004 MAXIMUM DISTANCE BETWEEN PLATES 1300mm

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 1300 mm Measurements depth 4200 mm Measurements height 1910 mm Machine weight 4300 kg Clamping Unit Clamping force 900 kN Additional Equipment Air valves: 2 Cascade control: 2-fold Core pulls BWAP: 1 piece Cgobvbkjv Rr I Nefrjt This HAITIAN ZHAFIR Zeres 900/160 was manufactured in 2017. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this HAITIAN ZHAFIR Zeres 900/160 hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2017, Condition: used, pressure:500 t passage width:1300x800 mm stroke:600 mm weight of the machine ca.:18 t dimensions of the machine ca.:2400 x 2400 x 5500 m draw back pressure:50 t Controll:Zweihandbedienung cylinder:1 Stück motor:50 kw Oil Cooling:elektrisch column diameter:200 mm work height max.:700 mm Table dimensions:1900 x 800 mm table height over floor:1000 mm pestle plate:1300 x 800 mm pre-running speed:150 mm/sec work speed:5-10 mm/sec. return speed:150 mm/sec :1500 l quantity of oil:1400 l Cgobvsd E Irmjbkfrjt

Condition: good (used), Year of construction: 2011, operating hours: 32,000 h, Functionality: fully functional, clamping force: 280 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,065 bar, total length: 3,200 mm, total width: 1,350 mm, total height: 1,850 mm, overall weight: 2,900 kg, Equipment: documentation/manual, injection moulding machine ENGEL Victory 200-28 Tech warehouse no.: 503562 manufacturer: ENGEL type: Victory 200-28 Tech controller: CC200 year of construction: 2011 technical data clamping unit clamping force: 280 kN size of mould plates h x v: 500 x 400 mm min. mould height: 150 mm max. open daylight: 550 mm opening stroke: 400 mm ejector stroke: 100 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 450 kg technical data injection unit screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar screw length: 17 l/d screw stroke: 140 mm screw speed: 480 min injection rate into the open: 78 g/s PS number of heating zones: 4 nozzle stroke: 230 mm measures & weight measures of machine l x w x h: 4.4m x 1.9m x 2.1m total weight: 2900KG Cgebvev Hpn Esbkfrot equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor LxW: 2800mm x 350mm Discharge height: 950mm Speed: 9m/min machine incl. Handling machine incl. water flow regulator Anti vibration mounts interface for ejector plates safety interface for temperature control units Schuko-socket 10A selection unit technical data robot-system handling type: Linear manufacture: ENGEL controller: Viper 6 year of construction: 2011 electric cabinet dimensions: 1,00m x 0,35m x 0,64m

Condition: excellent (used), Year of construction: 2014, Ruchser glazing press RU-HSK-83°/90°- 2.5 L in very good condition, sturdy design, tiltable and infinitely height adjustable Csbvswb H Taobkfrogt

Condition: good (used), Year of construction: 1990, Netstal 1000/445HP Closing 100 TO Scrow 40mm Stroke volume 44x44 Year 1990 Cgsbjgi D Thjvbkfret

Condition: new, New appliance Enmair EPV - 15 Proportional mixing valve Cost-effective variant for mixing virgin plastic pellets and regrind immediately available The proportional valves in the EPV series regulate the mixing and processing of processing of virgin plastic pellets and regrind in a specific ratio via a time ratio control. The mixing valve can be installed directly on suction conveyors, vacuum separators or in the pipelines. Advantages are the low costs, high control accuracy, simple installation and operation. Cebvbkofdr N Ajfregt - Stainless steel design - Control via control panel - Compressed air cylinder - Can be completely dismantled for cleaning when changing material - Compatible with existing systems - Conveying connection diameter 40 mm - 350 kg / h throughput - Menu User interface English Also available as EPV - 20 for connection size 50 mm 550 kg / h throughput ( +50€)

Year of construction: 2010, operating hours: 32,497 h, Condition: ready for operation (used), General Data Machine weight 8800 kg Additional Equipment 2 ejectors Vacuum pump Cgebvowcht Rjbkfrot This Kloeckner Desma 968.250 ZO was manufactured in 2010. A hydraulic injection moulding machine, it represents a reliable option for precision moulding tasks. Consider the opportunity to buy this Kloeckner Desma 968.250 ZO hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding