Year of construction: 2001, Condition: used, Wanner 13.20 2,2 KW year 2001 very good knives Manufacturer: Wanner Type: 13.20 Manufacture year: 2001 Power: 2,2 kW Intake: 130x200mm mm Rotor knife: 9 Dsbvrzov Rny Ijy Aeut Stator knife: 2 Rotor diameter: 130 mm mm Rotor width: 200 mm mm Price: € 1.850,00 contact: Mr. Rainer Eckerle

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Standard Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 150-250 mm Platen daylight fixed/variable min.-ma. : 375-475 mm Wight on movable mold half. max. : 110 kg Ejector force/stroke max. : 30/60 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2.000 bar Working hours: 3829 Machine is like new! Djbvrzoumzntoy Asut

Condition: used, Year of construction: 2001, Door hinge drilling unit: with 8 drilling spindles and adjustable drilling depth for simultaneous drilling of the fixing holes for 2-part and 3-part door hinges in blind and leaf frames. Frame and door frame: are precisely adjusted by means of the mitre fence, 2 pressure supports and guide pins on the drilling table and then pneumatically clamped. The stops in the mitre and foot area: are adjustable. Dusbvrzsbpt Ecoy Ast Suitable for the following series:Royal S50 N/65N, Royal S55/65/70, Royal- R45, 54w, 64w, 70, and 78w, Iskotherm 74 Weight: 90 kg

Year of construction: 2021, operating hours: 5,432 h, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: F420.21173, Machine: 3DGence Industry F420 Support solution system Laboratory dryer suitable for drying filament and annealing PEEK Compressor 3D printer technical data: Generic: Technique: Fused Filament Fabrication (FFF). Double extrusion head per print module, equipped with print head cleaning system to print complex geometry with soluble support. Dusbvrzju Td I Ujy Aot 3 print modules with different temperature specifications specially designed for the different materials. Working chamber: 380 × 380 × 420 mm (60 648 cm3). Layer thickness: 50µm Filament diameter: 1.75mm Printhead temperature (max.): 500°C Print bed temperature (max): 180°C Working chamber temperature (max): 180°C (active heating) Filament chamber: space for 4 individual filament rolls with automatic exchange system Temperature of the filament chamber: 50°C Part accuracy: 0.125mm or 0.0014mm/mm, whichever is greater Speed: Print module movement speed (max.): 1000 mm/s Print speed (max.): 400mm/s Dimensions and weight: Machine dimensions (w x d x h): 900mm x 940mm x 1950mm Weight: 350kg Connection: Voltage: 230V 1ph with 32A connection (3n+p+e) IEC 60309 (recommended) Power consumption (max.): 4600 W Power consumption (avg.): 1500W Communication: Ethernet, Wi-Fi, USB Print material: PLA, ABS, ASA, PA-CF, PC, PC-ESD ULTEM, PEEK, PEEK-CF Support material: soluble support material ESM-10, HIPS Materials also transferable for: PC, PC-ESD, PA-CF, PEEK, ESM Sales ex location! Specifications are leading We are happy to answer further questions by phone or email.

Year of construction: 2015, Condition: excellent (used), The device is for sale: They have not been used much and are fully functional Please refer to the type plate for technical details, there is of course a complete operating manual for the device Dobsncdwyjvrzy Aout

Year of construction: 1998, operating hours: 62,144 h, Condition: ready for operation (used), Clamping force: 2000kN, tie bar spacing: 520mm/520mm, platen dimensions X/Y: 715mm/715mm, min. mold installation height: 250mm, max. opening stroke: 650mm, ejector stroke: 225mm, ejector force: 66kN. Screw diameter: 55mm, injection weight: 240g, injection pressure: 2500bar, stroke volume: 286cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600mm/1700mm, weight: approx. 7000kg, operating hours: approx. 62144h. Documentation available. On-site inspection is possible. Expected to be available from June 2025. Djbvrzyjv Ifwxe Aout

Year of construction: 2001, Condition: used, Wanner 13.20 2,2 KW year 2001 very good knives Manufacturer: Wanner Manufacture year: 2001 Power: 2,2 kW Intake: 130x200mm mm Rotor knife: 9 Duobvrjv Rnynezy Aot Stator knife: 2 Rotor diameter: 130 mm Rotor width: 200 mm Price: € 1.750,00 contact: Mr. Rainer Eckerle

Condition: good (used), BOSCH B 830 303 227 Duobvsquuptorzy Aot

Condition: excellent (used), Year of construction: 2008, Demag System 1500/1500-16000 injection molding machine Year of production - 2008 Wittmann W 753 robot - 2008 Cage and conveyor Closing unit Closing force [kN] 15000 Clamping plate dimensions (hxv) [mm] 2150 x 1880 Clearance between columns (hxv) [mm] 1500 x 1250 Min./max. mould height [mm] 700 - 1400 Maximum opening width [mm] 2900 Injection unit Screw diameter [mm] 145 Injection volume [cm3] 10981 Debvrewalvdjzy Ajut Injection weight [g] 9880 Injection pressure [bar] 1454 Electric-hydraulic equipment Pump motor rated power [kW] 165 Heater power [kW] 97 Dimensions and weight Net weight with control cabinet [t] 74000 / 21000 Dimensions (length x width x height) [m] 14.4 x 3.4 x 2.9

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, clamping force: 3,000 kN, screw diameter: 65 mm, clearance between the columns: 630 mm, displacement volume: 1,078 cm³, injection pressure: 2,070 bar, injection weight: 980 g, mold height (min.): 250 mm, Closing force: 300t Year of production: 2014 Injection weight: 980g Injection unit .../2250 Screw diameter 65 mm Specific injection pressure 2070 bar Injection volume 1078 ccm Injection weight 980 g Pump motor power 63 kW Cylinder heating band power 26 kW Screw L / D ratio 22 Tool closing system 300/... Closing force 300 t Tool plate dimensions 1020 x 940 mm Clearance between columns 630 x 630 mm Ejector force 59 kN Tool height 250...650 mm Opening stroke 600 mm Maximum plate distance Dujbvswaidxjrzy Aet 1250 mm Ejector stroke 200 mm Electrical connection (protection) 550 l Weight 11800 kg Dimensions (m) length x width x height 7.0 x 1.8 x 2.4 m

Year of construction: 1993, Condition: good (used), Granulateur SHEER Duobvrzyeip N Une Aot Regret Moteur 5,5 kw 1 new fraise in option : 4 000€.

Year of construction: 2014, Condition: used, Temperature range -5 - +30°C °C heating capacity / kW Cooling capacity 2000 W weight of the machine ca. 130 kg SINGLE temperature control unit cooling unit Type: Chill Compact C-3-L Year of construction: 2014 Cooling capacity: 2.0kW Apparent power: 4.6kVA Permitted min/max. Temperature TS: -5 - +30°C Max. operating pressure PS: 17 bar Dujbjm Sk Rksvrzy Ajt Test pressure PT: 21 bar Filling weight: 1.8 kg

Condition: good (used), Year of construction: 2013, Labotek Trockenlufttrockner DDM 5/60 60 Liter Bj. 2013 + Förderer price: 4.950 € Contact: Mr. Rainer Eckerle Dobvrsv Rdbbozy Aout

Condition: new, Year of construction: 2004, Clamping force: 300 t Screw diameter: 70 mm Debvrzeuxdnbey Aeut Type: Horizontal Drive: Hydraulic Makes: Engel. Model: ES 1350-300 H-LV . Age: 2004. Registered hours: 88712 Clamping system : Hydraulic. Clamp Force : 300 tonnes. Screw diameter : 70 mm. ( Maximum injection volume : 901 cubic centimeters. Injection pressure : 1350 Bar, (Raised ). Mould height : 355-850 mm. Daylight : maximum 1200 mm. Mounting Platen size 1050x650 mm (Hor x Ver). Extras: Core pulling 3. : Engel E-Ejector stroke 150 mm. With ERC Robot, thermos units, outfeed belt .

Condition: excellent (used), Year of construction: 1999, BATTENFELD PE/PP PIPE HEAD PO 250 / 600 SI Type: PO 250/600 SI. Screen basket Year of manufacture: 1999 Little used Condition: Very good, needs cleaning With co-extruder Extrudex EN 25, year of manufacture 1999 For color strips The system is my property Location: Sachal Extrusionsmaschinen Duobvrjvy It Tezy Ajt Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, clamping force: 5,000 kN, screw diameter: 85 mm, clearance between the columns: 1,000 mm, displacement volume: 2,128 cm³, injection pressure: 1.574 bar, injection weight: 1,937 g, mold height (min.): 450 mm, ejector stroke: 250 mm, plate width: 1,590 mm, plate height: 1,470 mm, overall weight: 25,000 kg, Equipment: documentation/manual, Battenfeld HM 500/3400 Clamping force: 500t Year of manufacture: 2007 Injection weight in HP: 1937g Injection unit .../3400 Screw diameter: 85 mm Spec. injection pressure: 1574 bar Injection weight in HP: 1937 g L/D screw ratio: 22 Clamping unit 500/... Clamping force: 500 t Size of the clamping platens: 1590 x 1470 mm Clear tie bar spacing: 1000 x 800 mm Duobvrzyoumbf Ss Ast Max. platen spacing: 1600 mm Weight: 25000 kg Equipment: - 1 x air valve - 2 x core pull, closing side NW 6 - Interface for robots according to EUROMAP 67 - Temperature control of the feed zone, integrated - Core pull movement and parallel ejection using DFEE, additional pump - Equipment package with wear and corrosion protection, plasticizing unit - Potential-free contact parallel to the dosing device

Condition: used, Year of construction: 2018, operating hours: 4,372 h, Functionality: fully functional, film width: 830 mm, type of input current: three-phase, pressure: 6 bar, total width: 2,369 mm, total length: 14,897 mm, total height: 3,569 mm, input voltage: 230 V, power of vacuum pump: 27 W, heating capacity: 27 kW (36.71 HP), compressed air connection: 6 bar, operating pressure: 6 bar, For sale is a Kiefel KMD 64 Premium thermoforming machine/automatic pneumatic press. The machine is fully functional and has only been in operation for a few hours. Maintenance has also been performed regularly. Machine configuration: heating, forming, punching, punching, and stacking. Integrated handling system for stacking; see the attached document for stacking options. Main technical data/basic machine data: see the attached table. Technology/Process The KMD 64 Premium is the "largest" of the small-format pneumatic presses and is therefore more powerful. All common plastics can be economically processed into molded parts. These include (R)PET, PP, PS, CPET, OPS, PLA, PE, etc. Advantages 1. Fast compressed air supply and venting Djbvrzyjv R Uyue Ajut - 1-inch diameter valves to ensure high flow - Higher production output due to shorter molding times - Better product quality due to faster molding 2. Feed system - Pulling needle chain - Highest hygiene standards in KIEFEL systems - Precise motors for chain rail spreading 3. Larger table stroke - A table stroke of 140 mm is used for maximum product heights of up to 120 mm. 4. Stronger table drives for stable molds - High tool weights can be used in all stations - Robust and flexible mold designs are possible 5. Touch screen panel and Simotion (Siemens) control system - Easy machine operation We are happy to provide you with further information.

Condition: good (used), Year of construction: 2007, Labotek dryairdryer DMD/DT 25/40 40 Liter year 2007 + conveyor price: 3.450 € Dobvov Rcwzerzy Aout Contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2009, clamping force: 1,800 kN, screw diameter: 35 mm, displacement volume: 193 cm³, injection weight: 175 g, mold height (min.): 305 mm, ejector stroke: 200 mm, Equipment: documentation/manual, Battenfeld HM 180 /525H/60V Clamping force: 180t Year of manufacture: 2009 Injection weight in HP: 175/20.8g Injection unit .../525/...60 Screw diameter: 35/18 mm Spec. injection pressure: 2743/2593 bar Injection volume: 193/22.9 cc Injection weight in HP: 175/20.8 g L/D screw ratio: 22/20 Clamping unit 180/... Clamping force: 180 t Dusbvrsumbikozy Aet Clearance between tie bars: 570 x 520 mm Mold installation height: 305 mm Ejector travel: 200 mm Equipment: - Servo drive rotary table - 3 x hydraulic core

Condition: used, separator KOCH A 2, price: 590 €, contact: Mr. Rainer Eckerle Dsbvedaqk Sjrzy Asut

Condition: excellent (used), Year of construction: 2018, operating hours: 26,000 h, clamping force: 2,600 kN, screw diameter: 50 mm, clearance between the columns: 575 mm, injection weight: 438 g, mold height (min.): 195 mm, ejector force: 77,000 N, ejector stroke: 180 mm, opening stroke: 520 mm, plate length: 840 mm, plate width: 840 mm, overall weight: 10,000 kg, Borche BH-260 Clamping force: 260t Year of production: 2018 Injection weight: 438g Screw diameter: 50mm Specific injection pressure: 1680 bar Injection volume: 481 cc Injection weight: 438 g Cylinder heating band power: 11 kW Mold clamping system 260/... Clamping force: 260 t Mold table dimensions: 840 x 840 mm Clearance between columns: 575 x 575 mm Ejector force: 77 kN Mold height: 195...600 mm Opening stroke: 520 mm Maximum platen distance: 1120 mm Ejector stroke: 180 mm Weight: 10,000 kg Dimensions (m) L x W x H: 6.5 x 1.9 x 2.1 m Control: KEBA 1075 Dobjvitr Tsvrzy Asut Instrumentation: 1 x hydraulic core Gou87Cw88 2 x pneumatic valve Inverter EUROMAP connection

Condition: excellent (used), Year of construction: 2004, clamping force: 1,100 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,178 bar, injection weight: 103 g, ejector force: 40,000 N, overall weight: 7,400 kg, Closing force: 110t Year of production: 2004 Injection weight: 103g Injection unit 330/... Screw diameter 30 mm Specific injection pressure 2178 bar Injection volume 113 ccm Injection weight 103 g Tool closing system 110/... Closing force 110 t Tool plate dimensions 680 x 740 mm Clearance between columns without columns mm Ejector force 40 kN Opening travel 500 mm Duobev Txqcevrzy Aet Ejector stroke 130 mm Weight 7400 kg Dimensions (m) length x width x height 5.2 x 1.6 x 2.2 m Control CC200

Condition: excellent (used), Year of construction: 1999, Closing force: 25t Year of production: 1999 Injection weight: 17g Injection unit 60 Screw diameter 18 mm Specific injection pressure 2500 bar Injection volume 20 ccm Injection weight 17 g Screw L/D ratio 24.5 Tool closing system 250 Closing force 25 t Tool plate dimensions 400 x 400 mm Debvrzyov Txlto Asut Clearance between columns 270 x 270 mm Tool height 200 mm Opening stroke 275 mm Maximum plate distance 475 mm Electrical connection (safety) 120 l Weight 1900 kg Year of production 1999 Control Selogica Instrumentation: flap sorting Euromap 12 connector Picker

Condition: excellent (used), Year of construction: 2005, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 320 mm, injection pressure: 2,340 bar, injection weight: 27 g, mold height (min.): 225 mm, overall weight: 2,150 kg, Closing force: 50t Year of production: 09/2005 Injection weight: 27g Injection unit .../60 Screw diameter 22 mm Specific injection pressure 2340 bar Injection volume 30 ccm Injection weight 27 g Screw L/D ratio 20 Tool closing system 500/... Closing force 50 t Tool plate dimensions 446 x 446 mm Clearance between columns 320 x 320 mm Tool height Debsv Txn Uovrzy Aeut 225 mm Opening stroke 350 mm Maximum plate distance 575 mm Weight 2150 kg

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, clamping force: 350 kN, screw diameter: 22 mm, clearance between the columns: 280 mm, injection pressure: 2.061 bar, injection weight: 30 g, ejector stroke: 100 mm, opening stroke: 350 mm, plate width: 460 mm, plate height: 450 mm, total length: 3,200 mm, total width: 1,200 mm, total height: 2,000 mm, overall weight: 2,750 kg, pump power: 7,500 W, Equipment: documentation/manual, Demag Ergotech Concept 35/280– 80 Clamping force: 35t Year of manufacture: 2006 Injection weight in HP: 30g Injection unit Injection unit: .../80 Screw diameter: 22 mm Spec. injection pressure: 2061 bar Dusbvrzeti Arljy Ajt Injection volume: 34.2 cc Injection weight in HP: 30 g Hydr. drive power: 7.5 kW Cylinder heating power: 5.1 kW Clamping unit 350/... Clamping force: 35 t Size of the clamping plates: 460 x 450 mm Clear tie bar spacing: 280 x 280 mm Opening travel: 350 mm Max. plate spacing: 530 mm Ejector travel: 100 mm Weight: 2750 kg Dimensions (m) LxWxH: 3.2 x 1.2 x 2.0 m Equipment - filling hopper - sorting flap - bimetallic plasticizing structure - hydraulic core on movable plate