Year of construction: 2007, Condition: ready for operation (used), Air volume flow: 2.55m³/min, pressure dew point: 3°C, operating pressure: 16bar, refrigerant: R134a, refrigerant capacity: 670g. Documentation available. On-site inspection is possible. Dsb Hbwaev Ip R Nj Rjut

Year of construction: 2001, Condition: used, Wanner 13.20 2,2 KW year 2001 very good knives Manufacturer: Wanner Duob Hbjv Rny Ijwa Rst Type: 13.20 Manufacture year: 2001 Power: 2,2 kW Intake: 130x200mm mm Rotor knife: 9 Stator knife: 2 Rotor diameter: 130 mm mm Rotor width: 200 mm mm Price: € 1.850,00 contact: Mr. Rainer Eckerle

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Standard Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 150-250 mm Platen daylight fixed/variable min.-ma. : 375-475 mm Deb Hbsumzntjwa Rjut Wight on movable mold half. max. : 110 kg Ejector force/stroke max. : 30/60 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2.000 bar Working hours: 3829 Machine is like new!

Condition: used, Year of construction: 2001, Door hinge drilling unit: with 8 drilling spindles and adjustable drilling depth for simultaneous drilling of the fixing holes for 2-part and 3-part door hinges in blind and leaf frames. Frame and door frame: are precisely adjusted by means of the mitre fence, 2 pressure supports and guide pins on the drilling table and then pneumatically clamped. Dsb Hbsbpt Ecswa Rsut The stops in the mitre and foot area: are adjustable. Suitable for the following series:Royal S50 N/65N, Royal S55/65/70, Royal- R45, 54w, 64w, 70, and 78w, Iskotherm 74 Weight: 90 kg

Year of construction: 2021, operating hours: 5,432 h, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: F420.21173, Machine: 3DGence Industry F420 Support solution system Laboratory dryer suitable for drying filament and annealing PEEK Compressor 3D printer technical data: Generic: Technique: Fused Filament Fabrication (FFF). Double extrusion head per print module, equipped with print head cleaning system to print complex geometry with soluble support. 3 print modules with different temperature specifications specially designed for the different materials. Working chamber: 380 × 380 × 420 mm (60 648 cm3). Layer thickness: 50µm Filament diameter: 1.75mm Printhead temperature (max.): 500°C Print bed temperature (max): 180°C Working chamber temperature (max): 180°C (active heating) Filament chamber: space for 4 individual filament rolls with automatic exchange system Temperature of the filament chamber: 50°C Part accuracy: 0.125mm or 0.0014mm/mm, whichever is greater Speed: Print module movement speed (max.): 1000 mm/s Print speed (max.): 400mm/s Dimensions and weight: Machine dimensions (w x d x h): 900mm x 940mm x 1950mm Weight: 350kg Connection: Voltage: 230V 1ph with 32A connection (3n+p+e) IEC 60309 (recommended) Power consumption (max.): 4600 W Power consumption (avg.): 1500W Communication: Ethernet, Wi-Fi, USB Print material: PLA, ABS, ASA, PA-CF, PC, PC-ESD ULTEM, PEEK, PEEK-CF Support material: soluble support material ESM-10, HIPS Materials also transferable for: PC, PC-ESD, PA-CF, PEEK, ESM Sales ex location! Djb Hju Td I Uobwa Rout Specifications are leading We are happy to answer further questions by phone or email.

Year of construction: 2015, Condition: excellent (used), The device is for sale: They have not been used much and are fully functional Dob Hboncdwyowa Rout Please refer to the type plate for technical details, there is of course a complete operating manual for the device

Year of construction: 1998, operating hours: 62,144 h, Condition: ready for operation (used), Clamping force: 2000kN, tie bar spacing: 520mm/520mm, platen dimensions X/Y: 715mm/715mm, min. mold installation height: 250mm, max. opening stroke: 650mm, ejector stroke: 225mm, ejector force: 66kN. Screw diameter: 55mm, injection weight: 240g, injection pressure: 2500bar, stroke volume: 286cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600mm/1700mm, weight: approx. 7000kg, operating hours: approx. 62144h. Documentation available. On-site inspection is possible. Expected to be available from June 2025. Duob Hbjv Ifwxowa Ret

Year of construction: 2001, Condition: used, Wanner 13.20 2,2 KW year 2001 very good knives Manufacturer: Wanner Manufacture year: 2001 Power: 2,2 kW Intake: 130x200mm mm Rotor knife: 9 Stator knife: 2 Rotor diameter: 130 mm Dueb Hbwaev Rnyns Ret Rotor width: 200 mm Price: € 1.750,00 contact: Mr. Rainer Eckerle

Condition: good (used), BOSCH B 830 303 227 Dob Hbwaoquuptj Rjut

Condition: excellent (used), Year of construction: 2008, Demag System 1500/1500-16000 injection molding machine Year of production - 2008 Wittmann W 753 robot - 2008 Cage and conveyor Closing unit Closing force [kN] 15000 Clamping plate dimensions (hxv) [mm] 2150 x 1880 Clearance between columns (hxv) [mm] 1500 x 1250 Min./max. mould height [mm] 700 - 1400 Maximum opening width [mm] 2900 Injection unit Screw diameter [mm] 145 Injection volume [cm3] 10981 Injection weight [g] 9880 Injection pressure [bar] 1454 Electric-hydraulic equipment Dob Hbwowalvdea Rsut Pump motor rated power [kW] 165 Heater power [kW] 97 Dimensions and weight Net weight with control cabinet [t] 74000 / 21000 Dimensions (length x width x height) [m] 14.4 x 3.4 x 2.9

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, clamping force: 3,000 kN, screw diameter: 65 mm, clearance between the columns: 630 mm, displacement volume: 1,078 cm³, injection pressure: 2,070 bar, injection weight: 980 g, mold height (min.): 250 mm, Closing force: 300t Year of production: 2014 Injection weight: 980g Injection unit .../2250 Screw diameter 65 mm Specific injection pressure 2070 bar Injection volume 1078 ccm Injection weight 980 g Pump motor power 63 kW Cylinder heating band power 26 kW Screw L / D ratio 22 Tool closing system 300/... Closing force 300 t Tool plate dimensions 1020 x 940 mm Clearance between columns 630 x 630 mm Ejector force 59 kN Tool height Deb Hbwswaidxsa Reut 250...650 mm Opening stroke 600 mm Maximum plate distance 1250 mm Ejector stroke 200 mm Electrical connection (protection) 550 l Weight 11800 kg Dimensions (m) length x width x height 7.0 x 1.8 x 2.4 m

Year of construction: 1993, Condition: good (used), Granulateur SHEER Regret Dujb Hbwajip N Une Rst Moteur 5,5 kw 1 new fraise in option : 4 000€.

Year of construction: 2014, Condition: used, Temperature range -5 - +30°C °C heating capacity / kW Cooling capacity 2000 W weight of the machine ca. 130 kg SINGLE temperature control unit cooling unit Type: Chill Compact C-3-L Year of construction: 2014 Cooling capacity: 2.0kW Apparent power: 4.6kVA Dusb Hbwom Sk Rkea Rot Permitted min/max. Temperature TS: -5 - +30°C Max. operating pressure PS: 17 bar Test pressure PT: 21 bar Filling weight: 1.8 kg

Condition: good (used), Year of construction: 2013, Labotek Trockenlufttrockner DDM 5/60 60 Liter Bj. 2013 + Förderer price: 4.950 € Contact: Mr. Rainer Eckerle Dobev Rdbbe Hbwa Rout

Condition: new, Year of construction: 2004, Clamping force: 300 t Screw diameter: 70 mm Type: Horizontal Drive: Hydraulic Makes: Engel. Model: ES 1350-300 H-LV . Age: 2004. Registered hours: 88712 Clamping system : Hydraulic. Clamp Force : 300 tonnes. Screw diameter : 70 mm. ( Maximum injection volume : 901 cubic centimeters. Dujb Hbwasuxdnbe Rst Injection pressure : 1350 Bar, (Raised ). Mould height : 355-850 mm. Daylight : maximum 1200 mm. Mounting Platen size 1050x650 mm (Hor x Ver). Extras: Core pulling 3. : Engel E-Ejector stroke 150 mm. With ERC Robot, thermos units, outfeed belt .

Condition: excellent (used), Year of construction: 1999, BATTENFELD PE/PP PIPE HEAD PO 250 / 600 SI Type: PO 250/600 SI. Screen basket Year of manufacture: 1999 Little used Condition: Very good, needs cleaning With co-extruder Extrudex EN 25, year of manufacture 1999 Dob Hjvy It Tobwa Reut For color strips The system is my property Location: Sachal Extrusionsmaschinen Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, clamping force: 5,000 kN, screw diameter: 85 mm, clearance between the columns: 1,000 mm, displacement volume: 2,128 cm³, injection pressure: 1.574 bar, injection weight: 1,937 g, mold height (min.): 450 mm, ejector stroke: 250 mm, plate width: 1,590 mm, plate height: 1,470 mm, overall weight: 25,000 kg, Equipment: documentation/manual, Battenfeld HM 500/3400 Clamping force: 500t Year of manufacture: 2007 Injection weight in HP: 1937g Injection unit .../3400 Screw diameter: 85 mm Spec. injection pressure: 1574 bar Injection weight in HP: 1937 g L/D screw ratio: 22 Dsb Hbsumbf Sewa Reut Clamping unit 500/... Clamping force: 500 t Size of the clamping platens: 1590 x 1470 mm Clear tie bar spacing: 1000 x 800 mm Max. platen spacing: 1600 mm Weight: 25000 kg Equipment: - 1 x air valve - 2 x core pull, closing side NW 6 - Interface for robots according to EUROMAP 67 - Temperature control of the feed zone, integrated - Core pull movement and parallel ejection using DFEE, additional pump - Equipment package with wear and corrosion protection, plasticizing unit - Potential-free contact parallel to the dosing device

Condition: good (used), Year of construction: 2007, Labotek dryairdryer DMD/DT 25/40 40 Liter year 2007 + conveyor price: 3.450 € Dsb Hov Rcwzebwa Reut Contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2009, clamping force: 1,800 kN, screw diameter: 35 mm, displacement volume: 193 cm³, injection weight: 175 g, mold height (min.): 305 mm, ejector stroke: 200 mm, Equipment: documentation/manual, Battenfeld HM 180 /525H/60V Clamping force: 180t Year of manufacture: 2009 Injection weight in HP: 175/20.8g Injection unit .../525/...60 Screw diameter: 35/18 mm Spec. injection pressure: 2743/2593 bar Injection volume: 193/22.9 cc Injection weight in HP: 175/20.8 g L/D screw ratio: 22/20 Clamping unit 180/... Clamping force: 180 t Clearance between tie bars: 570 x 520 mm Mold installation height: 305 mm Ejector travel: 200 mm Equipment: - Servo drive rotary table Djb Hbwjumbikja Rsut - 3 x hydraulic core

Condition: used, separator KOCH A 2, price: 590 €, contact: Mr. Rainer Eckerle Djb Hbjdaqk Sjwa Rout

Condition: excellent (used), Year of construction: 2018, operating hours: 26,000 h, clamping force: 2,600 kN, screw diameter: 50 mm, clearance between the columns: 575 mm, injection weight: 438 g, mold height (min.): 195 mm, ejector force: 77,000 N, ejector stroke: 180 mm, opening stroke: 520 mm, plate length: 840 mm, plate width: 840 mm, overall weight: 10,000 kg, Borche BH-260 Clamping force: 260t Year of production: 2018 Injection weight: 438g Screw diameter: 50mm Specific injection pressure: 1680 bar Injection volume: 481 cc Injection weight: 438 g Cylinder heating band power: 11 kW Mold clamping system 260/... Deb Hevitr Tobwa Rsut Clamping force: 260 t Mold table dimensions: 840 x 840 mm Clearance between columns: 575 x 575 mm Ejector force: 77 kN Mold height: 195...600 mm Opening stroke: 520 mm Maximum platen distance: 1120 mm Ejector stroke: 180 mm Weight: 10,000 kg Dimensions (m) L x W x H: 6.5 x 1.9 x 2.1 m Control: KEBA 1075 Instrumentation: 1 x hydraulic core Gou87Cw88 2 x pneumatic valve Inverter EUROMAP connection

Condition: excellent (used), Year of construction: 2004, clamping force: 1,100 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,178 bar, injection weight: 103 g, ejector force: 40,000 N, overall weight: 7,400 kg, Closing force: 110t Year of production: 2004 Injection weight: 103g Injection unit 330/... Screw diameter 30 mm Specific injection pressure 2178 bar Injection volume 113 ccm Deb Hbwasv Txqcj Rout Injection weight 103 g Tool closing system 110/... Closing force 110 t Tool plate dimensions 680 x 740 mm Clearance between columns without columns mm Ejector force 40 kN Opening travel 500 mm Ejector stroke 130 mm Weight 7400 kg Dimensions (m) length x width x height 5.2 x 1.6 x 2.2 m Control CC200

Condition: excellent (used), Year of construction: 1999, Closing force: 25t Year of production: 1999 Injection weight: 17g Injection unit 60 Screw diameter 18 mm Specific injection pressure 2500 bar Injection volume 20 ccm Injection weight 17 g Screw L/D ratio 24.5 Tool closing system 250 Closing force 25 t Tool plate dimensions 400 x 400 mm Clearance between columns 270 x 270 mm Tool height 200 mm Opening stroke 275 mm Maximum plate distance 475 mm Electrical connection (safety) 120 l Weight 1900 kg Year of production 1999 Control Selogica Duobov Txlts Hbwa Ret Instrumentation: flap sorting Euromap 12 connector Picker

Condition: excellent (used), Year of construction: 2005, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 320 mm, injection pressure: 2,340 bar, injection weight: 27 g, mold height (min.): 225 mm, overall weight: 2,150 kg, Closing force: 50t Year of production: 09/2005 Injection weight: 27g Dob Hbwasv Txn Ue Rjut Injection unit .../60 Screw diameter 22 mm Specific injection pressure 2340 bar Injection volume 30 ccm Injection weight 27 g Screw L/D ratio 20 Tool closing system 500/... Closing force 50 t Tool plate dimensions 446 x 446 mm Clearance between columns 320 x 320 mm Tool height 225 mm Opening stroke 350 mm Maximum plate distance 575 mm Weight 2150 kg

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, clamping force: 350 kN, screw diameter: 22 mm, clearance between the columns: 280 mm, injection pressure: 2.061 bar, injection weight: 30 g, ejector stroke: 100 mm, opening stroke: 350 mm, plate width: 460 mm, plate height: 450 mm, total length: 3,200 mm, total width: 1,200 mm, total height: 2,000 mm, overall weight: 2,750 kg, pump power: 7,500 W, Equipment: documentation/manual, Demag Ergotech Concept 35/280– 80 Clamping force: 35t Year of manufacture: 2006 Injection weight in HP: 30g Injection unit Injection unit: .../80 Screw diameter: 22 mm Spec. injection pressure: 2061 bar Deb Hbwjti Arlja Rsut Injection volume: 34.2 cc Injection weight in HP: 30 g Hydr. drive power: 7.5 kW Cylinder heating power: 5.1 kW Clamping unit 350/... Clamping force: 35 t Size of the clamping plates: 460 x 450 mm Clear tie bar spacing: 280 x 280 mm Opening travel: 350 mm Max. plate spacing: 530 mm Ejector travel: 100 mm Weight: 2750 kg Dimensions (m) LxWxH: 3.2 x 1.2 x 2.0 m Equipment - filling hopper - sorting flap - bimetallic plasticizing structure - hydraulic core on movable plate