Year of construction: 2022, Condition: ready for operation (used), A Getecha plastic granulator is available. Rotor diameter: 300mm, cutting width min./max.: 400mm/1260mm, number of rotor knives: 5, power: 5.5kW. Including an enlarged control cabinet. Overhauled with less than 100 operating hours. Documentation available. Fjbu Hsucw S Eef S Rspg

Year of construction: 2012, Condition: ready for operation (used), Installation height min./max.: 200mm/550mm, opening stroke: 350mm, closing force: 350kN, screw diameter: 20mm, distance between tie bars: 270mm, max. injection volume: 31cm³, operating hours: 61737h. Documentation available. On-site inspection is possible. Fpebuot E Tq Do Hf S Reg

Year of construction: 1997, Condition: ready for operation (used), Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible. Fjbu Hf Sorc Hibs Rjpg

Condition: ready for operation (used), Year of construction: 2008, A complete StyroDesign EPS cutting system is available. The Styrodesign EPS cutting system is ideal for precise cutting of foam materials. Equipped with modern STYRODESIGN software, it offers optimum material utilization through advanced cutting path definition and nesting techniques. Documentation available. Fpobu Hf Sjtndwxs Reg

Year of construction: 2015, Condition: ready for operation (used), There is a complete pultrusion line with three Krauss Maffei RimStar Nano pumping machines, three creels, ABUS column-mounted slewing jib crane and a KraussMaffei EW 2300 CFI winder, tensile force: 10t, max. profile dimensions: 300x50mm, max. speed: 4m/min, on-site inspection is possible. Fsbu Hf Seriurbe Rspg

Year of construction: 2011, Condition: ready for operation (used), A rotational molding machine consisting of 2 rotational units and an oven in between. Rotation unit: Weight: 7500kg, weight with load: 11500kg, on 8 350mm x 350mm base plates. Rotation unit diameter: 3300mm. Compressed air nozzles: Pneumatic connection: 1inch, water connection: 0.5inch, 6bar, height: 1500mm. Oven: Dimensions X/Y/Z: approx. 5800mm/4200mm/6800mm, weight: approx. 27000kg, max. temperature: 400°C. Documentation available. Fpsbujr Eqvde Hf S Rog

Condition: ready for operation (used), Year of construction: 2008, A Krauss Maffei linear device (handling) for injection molding machines is available. Travel X/Y/Z: 1500mm/2500mm/4000mm, load capacity: 30kg, vacuum: 4x, compressed air: 3x, weight: approx. 650kg, operating hours: 69100h. The Y-axis is slightly skewed. Documentation available. On-site inspection is possible. Fjbu Hfou St I Do S Rjpg

Year of construction: 1993, Condition: ready for operation (used), An agglomerator for processing plastic shredded material is available. Output LDPE: 500kg/h, output OPP: 300kg-400kg/h, output TPO: 300kg-400kg/h, control: Siemens S5-95U. On-site inspection is possible. Fjbu Hsu U Nqwef S Rspg

Condition: ready for operation (used), Heating output: 2000W, ultrasonic frequency: 40kHz, weight: 275kg. Fobu Hevvu N Hjf S Rjpg

Year of construction: 2009, Condition: ready for operation (used), Clamping force: 1000kN, column distance X/Y: 420mm/420mm, mold height min./max.: 200mm/800mm, platen size X/Y: 620mm/620mm. Screw diameter D25/D35: 25mm/35mm, max. injection volume D25/D35: 90cm³/173cm³, max. injection pressure: 2500bar, injection speed: 160mm/s. Including various accessories, including D25 and D35 units. Dimensions X/Y/Z: approx. 4500mm/2200mm/1700mm, weight: approx. 5300kg, control: Arburg Selogica, operating hours: 1798h. Documentation available. Fsbustthr No Hf S Rjpg

Year of construction: 2013, Condition: ready for operation (used), Five KLN and Rudholzer welding and hot riveting machines are available. 1/2) KLN WNA-W, year of construction: 2012/13, power: 11kW, frequency: 25kHz, machine dimensions X/Y/Z: approx. 2700mm/2000mm/2500mm, control: Siemens Simatic S7. 3/4/5) Rudholzer hot riveting machine, year of manufacture: 2016, control system: Siemens PLC. On-site inspection is possible. Fpebjugmxvou Hf S Rog

Condition: ready for operation (used), Year of construction: 2006, Power: 1.5kW, materials: plastic/aluminum, intended use: welding and machining processes, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1800mm, weight: approx. 150kg. Including accessories. On-site inspection is possible. Fpsbu Hfsukhz Io S Reg

Year of construction: 2002, Condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Fpebu Hf Seum U S Es Rjg

Year of construction: 2009, Condition: ready for operation (used), There is a complete underwater pelletizing system with vibrator, heat exchanger, centrifuge, extruder, pelletizer, water basin, sieves, knife blocks, documentation and other spare parts available, a sieve changer is available separately, an inspection is possible. Febu Hf Seqxc Aws Rjpg

Year of construction: 2002, Condition: ready for operation (used), PET films were produced on the extruder, working width: 650-800mm, output: 600-700kg/h, with cooling spirals, new extruder screw, degassing system, other spare parts and documentation, without dosing system, an on-site inspection is possible. Fpobueq Abwhe Hf S Rsg

Year of construction: 1990, Condition: ready for operation (used), Motor power: 80kW, insertion diameter: 70mm, screw diameter: 70mm, speed: 300rpm, heating zones: 3(7kW/7kW/5kW), dimensions X/Y: approx. 5000mm/900mm, weight: approx. 5700kg. Including 2 pairs of screws, cooling roller mill MPM, year of construction: 2020. Fjbu Hfetxb Dmj S Ropg

Year of construction: 1998, Condition: ready for operation (used), Screw diameter: 58mm, power: 30.6kW, screw speed: 280rpm, conveying capacity: approx. 120kg/h, dimensions X/Y/Z: approx. 2500mm/1500mm/1500mm. Including 2x pairs of screws and a new Brabender FW 80 metering machine. Fpjbu Hfstxb Dto S Rjg

Year of construction: 2009, Condition: ready for operation (used), Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Telsonic MPS-4, connected load: 4000W, length: 459mm, width: 854mm, height: 1315mm, weight: 130kg. With SICK C4000 safety light curtains, cabin and documentation. On-site inspection is possible. Febu Houy T I Hef S Rspg

Year of construction: 2010, Condition: ready for operation (used), An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible. Fpebu Hf Souy T Nde Rjg

Year of construction: 2009, Condition: ready for operation (used), There are 5 identical Engel injection molding machines available. Screw diameter: 2x 30mm/3x 35mm, clamping force: 80t, weight: approx. 4400kg. All machines including attachment crane. One Engel (Fig. 5) serves as a spare parts dispenser for the remaining 4 machines. Documentation available. On-site inspection is possible. Fpebu Hf Ssu Afz Dj Rsg

Year of construction: 2018, Condition: ready for operation (used), Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible. Fpebu Hf Sor N Rh Ho Rog

Year of construction: 1990, Condition: ready for operation (used), A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible. Fpebu Hfovw Aqhe S Rjg

Year of construction: 2019, Condition: ready for operation (used), Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible. Fpobu Hfsrk Rxqe S Rjg

Year of construction: 2008, Condition: ready for operation (used), A Graewe planetary saw (inline pipe saw) is available. Max. pipe diameter: 500mm, power: 7.5kW, machine dimensions X/Y/Z: approx. 3500mm/1800mm/2000mm, weight: approx. 3200kg. Documentation available. On-site inspection is possible. Fpsbeu Ei Uasu Hf S Rjg

Year of construction: 1999, Condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Fpobu Hfoilhfco S Rsg