Used pneumatic presses for sale (32)

Condition: excellent (used), functionality: fully functional, pressing force: 3 t, Force 32 kN, stroke 100 mm Fpedpfx Aae Aiv Rcsnop

Condition: good (used), Year of construction: 1999, machine/vehicle number: 68-410235, functionality: fully functional, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, SCHMIDT HydroPneumatic Press No. 68 including safety control system (KLEINIG Engineering) and machine base frame. For sale is a SCHMIDT HydroPneumatic Press No. 68, manufactured in 1999, which underwent a complete overhaul in 2019 and was last fully inspected in 07/2025 (inspection report available). The press is equipped with a KLEINIG press safety control system KPS-SPS with two-hand operation and emergency stop. The safety control system is EC type-approved. Technical data: Fedoz Duhxjpfx Aanepp Manufacturer: SCHMIDT Press type: HydroPneumatic Press No. 68 Year of manufacture: 1999 Overhaul: 2019 Machine No.: 68-410235 Serial No.: 1-014-99 Pressing force: 62 kN Stroke: 100/12 mm Safety distance: 150 mm Post-travel time: 1 sec. Post-travel distance: 15 mm Cylinder working side: 2967/1998 Cylinder translator: 3723/1999 Safety control system: KLEINIG KPS-SPS Serial No.: KE00633-011 Two-hand safety control system EC type-approved Control cabinet IP54 Display with touch panel Mains connection 85–264 V / 50/60 Hz Programmable digital inputs/outputs Programming port including USB cable and PLC software 2-channel pneumatic control block Two-hand buttons and emergency stop X1/X2 sockets for connection to SCHMIDT presses Including machine base frame KE 10 heavy_AL: Aluminum profile design Height-adjustable screwed feet Glare-free workstation lamp Compressed air storage tank 5-way 230 V socket strip Height-adjustable footrest Plastic worktop The press is offered complete with the described safety control system and machine base frame. Documents, operating instructions, etc. are all available. Inspection possible by arrangement.

Condition: used, For sale is a TOX Pressotechnik press, type MBG 004.124. The machine has a pressing force of 40 kN, which corresponds to approximately 4 tons, and is suitable for industrial pressing, joining, assembly, riveting, embossing, and upsetting operations. A particular highlight is the current inspection: The machine is inspected and certified until [date]. Technical data: Fpsdpfxsznkvpe Aanep - Manufacturer: TOX Pressotechnik - Type: MBG 004.124 - Product type: Press / Insertion machine / Joining machine - Pressing force: 40 kN - Maximum air pressure: 5 bar - Total stroke: 200 mm - Working stroke: 80 mm - Year of manufacture: 2001 - Machine serial number: 210192.1 - Machine number / Electrical: 210193.1 - Rated voltage: 230 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Power: 0.2 kW - Rated current: 0.5 A - Fuse rating: 16 A - Protection class: IP65 - Standard: DIN EN 60204 - Circuit diagram: STE 325-26 - Country of manufacture: Germany - Inspection valid until: [date] Condition: used The press operates with a total stroke of 200 mm. The actual working stroke is 80 mm, providing a maximum pressing force of 40 kN. The machine is suitable, for example, for inserting bushings, bearings, and bolts, as well as for assembly, riveting, embossing, upsetting, and joining operations. The exact condition and scope of supply can be seen in the images. You can find more presses and industrial machines – new and used – in our shop! "Everything from one source: We will be happy to offer you suitable financing for your project." PD

Condition: used, Pneumohydraulic cylinder, TOX Pressotechnik Hydro-pneumatic press, power unit Fodeu D Tz Uopfx Aanepp Type: S 04.00.050.12 D Serial No.: 208696.460 Year of manufacture: approx. 2000 Pressure output: 4.0 tons at 10 bar Pressure output: 3.0 tons at 8 bar Pressure output: 2.6 tons at 7 bar Pressure output: 2.4 tons at 6 bar Pressure output: 2.0 tons at 5 bar Pressure output: 1.6 tons at 4 bar Pressure output: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Piston rod thread: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with digital display, TOX, for force measurement, type 167282 - Overall height of power unit with piston rod only = 610 mm - Overall height of power unit hydro-pneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition 2 units available, price per unit

Condition: used, Year of construction: 2011, Pneumohydraulic press Manufacturer: TOX Type: EMB 075.001.A.001 Year of manufacture: 2011 Press force: 750 kN (equivalent to approximately 75 tons of press force) Total stroke: 200 mm Working stroke: 10 mm Machine weight (without tooling): 4,150 kg Fpedpfsz H I I Rsx Aansp 41126

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS PRESS Pressing force: 32 kN Stroke: 100 mm Dwell time: 60 s Support area: 300 x 240 mm Fedpfx Ao Adz U Ejanopp MACHINE DETAILS Manufacturer: Schmidt Machine type: Metal press Length: 1,500 mm Width: 800 mm Height: 2,000 mm Weight: 400 kg

Condition: excellent (used), Year of construction: 2012, Pressing force 28 kN Min./max. operating pressure 3 / 6 bar Stroke 12 mm Electrical connection 220 Volt Fpjdpfx Aez Hv U Sjanop Overhang 130 mm Table 200 x 150 mm

Condition: used, Year of construction: 2005, Pneumatic Press Tox Inventory No. 3941 Power Pack Press Tox Pressotechnik Type Stiskalnika 12050052 Year of Manufacture 2005 Type BS 15.30.100.06 No. 800322.35 * Two-hand control STE 003-03- 1/2" * Pressure force kN * Working stroke mm * Power stroke mm * Reach approx. 220 mm * Table size 450 x 400 mm * Installation height approx. 265 mm * 2 manual controls * Air inlet bar Fjdozzrugepfx Aanepp * Electrical connection 230 V * Space requirement: approx. W 700 x H 2050 x D 1050 mm * Weight approx. 500 kg

Condition: used, Year of construction: 1998, machine/vehicle number: 9083432, functionality: fully functional, Pneumatic press 125 tons Fjdpfxsyzhqye Aanspp

Condition: like new (used), Year of construction: 2018, functionality: fully functional, pressing force: 2 t, table width: 330 mm, table length: 350 mm, throat depth: 100 mm, air pressure: 6 bar, cylinder diameter: 28 mm, For sale in new condition HYUNDAE HP-2000 2t PNEUMATIC PRESS Brand: HYUNDAE MACHINERY & ELECTRIC CO.,LTD Type: HP-2000 manufacturing of year: 2021 Max. pressing force: 2t open height:300mm Bolster Size: 350x330mm Stroke length: 100mm Fpjdpfjvbfbwsx Aanop Cylinder diameter: 28mm built on a press stand Two-handed operation Voltage: 110V Air Connecting Hose Diameter:12mm

Condition: like new (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, pressing force: 1 t, table width: 200 mm, table length: 230 mm, total width: 400 mm, total height: 860 mm, overall weight: 105 kg, air pressure: 6 bar, FCP-C 10KN pneumatic press machine for sale in several pieces manufacturer: FCP-C pressing force 1 ton Stroke: 75-100 (mm) Air pressure 0.2-0.5 MPa Open height 320 (mm). two-hand operation table size: 200x230mm Shaft dimensions Bore diameter φ15H9 (mm) x depth 35 (mm). Speed ​​controller Low friction roller Fsdpfxjv E Sazo Aanspp Rotation stop lever height: 880mm length: 360mm width:400mm weight: 105kg Many options (timing box with counter, load management device, etc.). ●The lowering speed of the press can be freely adjusted by the speed controller. ●Mechanical stop for bottom dead center adjustment. ●Inching operation valve for smooth forming. ●Air equipment is also standard.

Condition: excellent (used), functionality: fully functional, a complete workstation with integrated pneumatic system. Fjdpfjz E A Ehox Aanepp featuring pneumatic two-hand release Force: 45 kN Stroke: 60 mm

Condition: used, Year of construction: 1999, machine/vehicle number: 9093548, functionality: fully functional, Pneumatic press 63 tons Fsdpfxoyzhvpo Aanepp

Condition: used, TOX Pressotechnik Industrial Pneumatic Press Station / Pneumohydraulic Press with Roller Guide Table (6 bar, 2.4 m), Used Equipment Fedpfx Ajz Rxb Dsanspp Technical Data: Type: Industrial Pneumatic / Pneumohydraulic Press Station Overall Dimensions (W × D × H): 1300 × 1270 × 2400 mm Roller Feed Conveyor Dimensions: 470 × 500 mm Work Table Internal Opening / Clearance: 450 × 550 mm Press Cylinder and Drive Data (TOX Pressotechnik): Manufacturer: TOX Pressotechnik GmbH (Made in Germany) Type: Q-K 015.030.200.12 Serial No.: 340379.117 System: Pneumohydraulic power cylinder (TOX Powerpackage) Maximum Air Pressure: 6.00 bar Oil Volume (ΔV): 135 ml Equipment and Features: Enclosed, sound-insulated safety cabin with inspection window and upward-opening door Heavy-duty four-column press frame for precise parallel alignment Integrated roller feed conveyor for easy workpiece handling Pneumatic air preparation unit (pressure regulator and filter) and emergency stop button Overall Dimensions: Width: 1300 mm Depth: 1270 mm Height: 2400 mm

Condition: ready for operation (used), Burger D05 Pneumatic Press Weight: 230 kg Pressing force: 6000 kg Stroke: 39 mm Operating pressure: 6 bar You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and view our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Fpodjz Hya Espfx Aansp Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: good (used), Year of construction: 2015, functionality: unexamined, - Total stroke: 300 mm - Maximum press force: 68.9 kN - Power: 0.3 kW - Min/max air pressure: 3 - 6 bar Fpsdpfx Aowxvwieanjp - Machine weight: 1250 kg

Condition: ready for operation (used), Schmidt 24-041-89 Pneumatic Press Pressing force: 9 kN Overtravel: 15 mm Two-hand operation Max. operating pressure: 9 bar Stroke: 50 mm You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, net invoicing is possible, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers. Fpsdpfx Aexxaz Ajanjp Stated company names and trademarks are property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description are possible and remain reserved.

Condition: used, Year of construction: 2016, Column press Tox 4 Mag 008.288 A.001, year 2016 Fpedpfx Aajw D R I Tenjp Pressing force: 80 kN Total stroke: 180 mm Power stroke: 12 mm Machine weight: 760 kg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 165236.1, Offer 25418 Technical data: - Pressing force approx. 110 kN - Working stroke approx. 50 mm - Force stroke 12 mm - Overhang approx. 150 mm - Table size 280 x 180 mm - Adjustable installation height up to max. 300 mm - 2 manual controls Fpjdpfx Aezfh Hyjanjp - Air inlet 6 - 8 bar - Total space requirement approx. W 600 x H 2500 x D 900 mm - Weight approx. 400 kg

Year of construction: 2007, condition: excellent (used), Control: STE 328-89-1 1/2" complete TOX power pack: S75.160.200.12D table size: 996 x 695 mm installation height: 600 mm total stroke: 150 mm Power stroke: 10 mm Weight: 5700 kg Fodpfx Ajp Aul Aeanspp Electrical connection 230 V

Condition: good (used), Manufacturer: unknown Fodpfort Immox Aanjpp Type press: P 14 (?) Type: Table mounting press Dimensions: 150 x 220 x 750 mm Table dimensions: 1,500 x 700 x 820 mm Weight: approx. 80 kg

Condition: used, Year of construction: 1989, • pneumatic Fjdjlkdy Eepfx Aanopp • Operating pressure max. (bar): 8 • Weight max. (kg): 80 • Included tools: included (see photos)

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Fedjtrpiiopfx Aanepp Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: new, Year of construction: 2025, pressure 3,3 bei 6bar t dayligth 250 mm stroke 70 mm Fpjdey Umf Aepfx Aanjp work stroke 10 mm table surface area 220x190 mm throat 150 mm weight of the machine ca. 350 kg

Condition: used, Technical details: pressure: manuell t distance between columns: - mm stroke: ca. 20 mm machine weight approx.: 9,5 kg dimensions of machine: L: 580 x B:280 x H:80 mm Fodpfxsu Nftge Aanepp pneumatic cable terminal press - application: press of cable terminal on electrical cable and air-conditioning lines futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 20mm - tool holder: width=40mm ; length=90mm - maunal lever Ø 30 x L:300mm equipment - toolbox with div. round and hexagonal tool jaws see the picture i.D. *