Used pneumatic presses for sale (28)

Condition: good (used), Year of construction: 1999, Pneumatic press make SCHMIDT Type:ZHS-2/22 year 1999 with two-hand operation. Fgodpjiduvcjfx Adcec UVV until 2023.

Condition: used, Year of construction: 2005, pressure 30 t Stroke 190 mm distance between columns 440 mm Fodeyfwvrspfx Adcogc side window 450 mm daylight (max. stroke up, adjustment up) 350 mm table surface area 595x450 / 440x595 mm table height over floor 725 - 900 mm table adjustment range 175 mm ram surface 90 mm power requirement 0,5 kW Weight 1,20 kg dimensions (WxDxH) 1,5 x 1,0 x 2,9 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck Basic unit power pack K 30.181-190.10 with stroke limitation, anti-rotation protection, universal underframe UUM 1-200.031, adjustable working height Total stroke 190 mm / power stroke 10 mm

Condition: used, Technical details: pressure: manuell t stroke: 15 mm machine weight approx.: 8,4 kg dimensions of machine: 600x250x70 mm Pneumatic Cable Terminal Press - application: press of cable terminal on electrical cable and air-conditioning lines futher details: Fgsdpfx Aju Nfr Nodcoc - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 15mm - tool fork: width=30mm ; length=70mm - maunal lever Ø 30 x L:300mm equipment - toolbox with div. round and hexagonal tool jaws i.D. *

Condition: used, Technical details: pressure: manuell t distance between columns: - mm stroke: ca. 20 mm machine weight approx.: 9,5 kg dimensions of machine: L: 580 x B:280 x H:80 mm Fodsu Nftgjpfx Adcegc pneumatic cable terminal press - application: press of cable terminal on electrical cable and air-conditioning lines futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 20mm - tool holder: width=40mm ; length=90mm - maunal lever Ø 30 x L:300mm equipment - toolbox with div. round and hexagonal tool jaws see the picture i.D. *

Condition: good (used), functionality: fully functional, Type DZ 4 Fodpfx Aszck Uvsdcjgc Press force at 6 bar 4 t Press force at 12 bar 8 t Table size W x D approx. 280 x 280 mm Installation height 350 mm Throat depth 160 mm

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition Fgjdpfx Aou D Tz Uodcsc 3 pieces available, price per piece

Condition: new, Year of construction: 2025, pressure 3,3 bei 6bar t dayligth 250 mm Fodpoy Umf Ajfx Adcjgc stroke 70 mm work stroke 10 mm table surface area 220x190 mm throat 150 mm weight of the machine ca. 350 kg

Condition: excellent (used), C-Frame Press, Electric Press, Servo Press, Electric Press Tox Ecoline CMB008.407.A.001, Tox Ecoline CMB008.407.A.001, Used Machine Manufacturer: Tox Model: CMB008.407.A.001 (Ecoline) Year: 2011 Weight: 900 kg Overall Dimensions: 1250 x 1400 x 2610 mm Pressure: 5500 kg Stroke: 300 mm Max Speed: 200 mm/s Fgsdouccicepfx Adcoc We are offering a high-quality servo press that is the ideal solution for all precision and high-performance industrial tasks. This press provides exceptional advantages in both productivity and quality, making it the perfect choice if you are looking for a reliable, energy-efficient, and cost-effective solution. High Precision: The servo press ensures precise control, allowing for repeatable and accurate operation, with tolerances down to micrometers. Energy Efficiency: It consumes significantly less energy compared to traditional hydraulic presses, enabling more cost-effective long-term operation. Quiet Operation: Operates with low noise levels, creating a more pleasant working environment. Flexible Application: Versatile use across various industries, from automotive to fine mechanics. Programmable motion profiles allow for quick and easy reconfiguration for different tasks. Maintenance-Friendly: Minimal maintenance requirements, a reliable, long-lasting machine that leads to less downtime.

Condition: like new (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, pressing force: 1 t, table width: 200 mm, table length: 230 mm, total width: 400 mm, total height: 860 mm, overall weight: 105 kg, air pressure: 6 bar, FCP-C 10KN pneumatic press machine for sale in several pieces manufacturer: FCP-C pressing force 1 ton Stroke: 75-100 (mm) Air pressure 0.2-0.5 MPa Open height 320 (mm). two-hand operation table size: 200x230mm Shaft dimensions Bore diameter φ15H9 (mm) x depth 35 (mm). Speed ​​controller Fedev E Sazepfx Adcegc Low friction roller Rotation stop lever height: 880mm length: 360mm width:400mm weight: 105kg Many options (timing box with counter, load management device, etc.). ●The lowering speed of the press can be freely adjusted by the speed controller. ●Mechanical stop for bottom dead center adjustment. ●Inching operation valve for smooth forming. ●Air equipment is also standard.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, pressing force: 2 t, table width: 330 mm, table length: 350 mm, throat depth: 100 mm, air pressure: 6 bar, cylinder diameter: 28 mm, For sale in new condition HYUNDAE HP-2000 2t PNEUMATIC PRESS Fedpfx Adsvbfbwecogc Brand: HYUNDAE MACHINERY & ELECTRIC CO.,LTD Type: HP-2000 manufacturing of year: 2021 Max. pressing force: 2t open height:300mm Bolster Size: 350x330mm Stroke length: 100mm Cylinder diameter: 28mm built on a press stand Two-handed operation Voltage: 110V Air Connecting Hose Diameter:12mm

Condition: new, pressure 4,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm Fgjdpfx Asfv Av Sjdcec spindle diameter 25 mm weight of the machine ca. 24 Kg dimensions 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings

Condition: new, pressure 8,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm Fgsdjfv Awaepfx Adcsc spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Fgjdpfx Adjh U Dtuocjc Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Year of construction: 2007, condition: excellent (used), Control: STE 328-89-1 1/2" complete TOX power pack: S75.160.200.12D table size: 996 x 695 mm installation height: 600 mm Fodpfx Aop Aul Asdcsgc total stroke: 150 mm Power stroke: 10 mm Weight: 5700 kg Electrical connection 230 V

Condition: new, pressing force: 3 t, Force 32 kN, stroke 100 mm Fgsdpfeyxmppex Adcec

Condition: good (used), Year of construction: 2015, functionality: unexamined, - Total stroke: 300 mm - Maximum press force: 68.9 kN - Power: 0.3 kW - Min/max air pressure: 3 - 6 bar - Machine weight: 1250 kg Fgodswxvwiepfx Adcoc

Condition: used, Year of construction: 1989, - pneumatic - Max. operating pressure (bar): 8 Fedpfolkdy Eox Adcegc - weight max. (kg): 80 - enclosed tools: included (see photos)

Condition: used, Pneumatic C-frame press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Pneumatic press Serial No. 3437 Year approx. 1990 Pressing force 3.0 tons at 6 bar Pressing force 2.6 tons at 5 bar Pressing force 2.2 tons at 4 bar Pressing force 1.6 tons at 3 bar Pressing force 1.0 tons at 2 bar Throat depth 150 mm Power stroke 6 mm Approach stroke 50 mm Total stroke 56 mm Ram surface Ø 100 mm Tool holder Ø 12 mm Maximum installation height 180 mm Fsdpfx Asw A Srwodcsgc Table size 200 x 200 mm Compressed air requirement max. 6 bar - Pneumatic power cylinder with mechanical force amplifier (wedge-lever principle) - Press cylinder height-adjustable on column via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Space requirement (L x W x H) 440 x 230 x 750 mm Weight 127 kg Good condition

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Fgjdpfx Astrpiiodcec Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: used, Year of construction: 2022, machine/vehicle number: 884, functionality: fully functional, input voltage: 230 V, input current: 16 A, input frequency: 50 Hz, pressing force: 6 t, total length: 730 mm, total width: 380 mm, total height: 1,295 mm, overall weight: 93 kg, Equipment: CE marking, documentation/manual, We offer this used LCM PRIMA self-clinching fastener insertion press, year of manufacture 2022. Fgjdjy E Edfjpfx Adcoc Manufacturer: LCM Model: PRIMA Year of manufacture: 2022 Condition: used Category ID: 1118 Type ID: 1915 Machine type: self-clinching fastener insertion press If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1999, machine/vehicle number: 9093548, functionality: fully functional, Pneumatic press 63 tons Fedpfxoyzhvpj Adcjgc

Condition: used, Year of construction: 1998, machine/vehicle number: 9083432, functionality: fully functional, Pneumatic press 125 tons Fodpfxoyzhqyj Adcegc

Condition: used, Year of construction: 2016, Column press Tox 4 Mag 008.288 A.001, year 2016 Pressing force: 80 kN Total stroke: 180 mm Power stroke: 12 mm Machine weight: 760 kg Fgjdpjw D R I Tsfx Adcec

Condition: good (used), Manufacturer: unknown Type press: P 14 (?) Type: Table mounting press Dimensions: 150 x 220 x 750 mm Table dimensions: 1,500 x 700 x 820 mm Weight: approx. 80 kg Fgsdpfx Adert Immscoc

Condition: ready for operation (used), Schmidt 24-041-89 Pneumatic Press Pressing force: 9 kN Overtravel: 15 mm Two-hand operation Max. operating pressure: 9 bar Stroke: 50 mm You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. Fedsxxaz Aopfx Adcjgc For international customers, net invoicing is possible, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers. Stated company names and trademarks are property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description are possible and remain reserved.