Used press brakes with 100-119t bending force for sale (125)

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, Available starting September/October. Operating hours: Laser: 35,000 hours. Lasdpfxozn N Hgs Ab Noh

Condition: used, Year of construction: 2001, functionality: fully functional, operating hours: 43,000 h, For sale: TRUMPF L3030 laser cutting machine YEAR 2001 LIFTMASTER+ with loading and unloading shuttles Lsdpezq R D Sjfx Ab Nsah 3000 WATT FORMAT 3000X1500 MAGNETIC TURBINE SIEMENS control

Condition: like new (used), Year of construction: 2023, functionality: fully functional, pressing force: 100 t, operating speed: 75 mm/s, table height: 1,000 mm, throat depth: 1,000 mm, total length: 4,450 mm, total width: 1,820 mm, total height: 2,650 mm, overall weight: 7,900 kg, controller manufacturer: Lenze, working width: 3,060 mm, bending force (max.): 100 t, back gauge: 1,000 mm, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 3,200 mm, warranty duration: 6 months, control type: CNC control, number of support arms: 2, back gauge adjustment: CNC-controlled, number of axes: 6, actuation type: electric, Equipment: CE marking, documentation/manual, foot remote control, safety light barrier, SafanDarley edge bending machines are innovative and highly efficient sheet metal processing machines from the Dutch manufacturer. Their bending precision and reliability have been highly appreciated by users in Poland and worldwide. The SAFANDARLEY E-Brake edge bending machine features an electric drive. Lenze servomotors, controlled by frequency inverters from the same manufacturer, enable fast and reliable operation of the system for many operating hours. Additionally, the machine consumes electrical energy only during the downward movement of the slide. The slide returns to its original position using the force generated by springs. Even when the machine is idle, it practically does not consume electrical energy because the system does not have a pump, as is the case with hydraulic presses. We estimate that the electrical energy consumption is 70% lower than in conventional hydraulic presses. SAFANDARLEY servo-electric edge bending press, model E-Brake Press force: 1000 kN (100 tons) Slide stroke: 300 mm Opening: Q=590 mm Upper beam lowering speed: 75 mm/s Upper beam accuracy: +/- 0.01 mm Maximum speed of the back gauge fingers: 350 mm/s Maximum reach of the back gauge fingers (third point of support, reach in the X-axis): 1000 mm Back gauge range in the R-axis: 150 mm Connected power: 11 kW Weight: 7900 kg Ljdpfx Abor Ndxqj Nsah Machine width: 4550 mm Machine depth: 1820 mm Machine height: 2510 mm Power supply: 3/N/PE 50 Hz – 400/230 V Servo-electric drive (without a hydraulic system) Power transmission via belts CNC-controlled axes: Upper beam: CNC axes: Y1-Y2 Back gauge: CNC axes: X-R-Z1-Z2 Hydraulic upper clamp: WILA Machine inspection and testing are possible.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, pressing force: 200 t, working range: 4,100 mm, Equipment: CE marking, emergency stop, foot remote control, lower tooling, safety light barrier, upper tooling, Used Edwards Pearson Pr10 8 axis CNC pressbrake Bystronic EDWARDS PEARSON PR 10 ELITE MODEL CNC PRESS BRAKE Specifications: · 8 axis machine · 6 axis back gauge · Year 1999 · 200 Ton Bending Force · 4,100mm Bending Length Lajdpfx Ajwcf Eqsb Nsh · Cybelec CNC Control Complete with a large amount of upper and lower tooling

Condition: excellent (used), Year of construction: 1999, machine/vehicle number: PR8, functionality: fully functional, pressing force: 100 t, controller manufacturer: Cybelec, working width: 3,100 mm, bending force (max.): 100 t, working range: 3,100 mm, control type: CNC control, number of axes: 8, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, lower tooling, safety light barrier, upper tooling, High quality, very clean used Edwards Pearson Beyeler Pr8 8axis cnc pressbrake for sale Edwards Pearson BYSTRONIC PR8 100 x 3100 100 ton x 3100mm 8 Axis CNC Hydraulic Down stroke Press Brake complete With Cybelec Control. Manufactured 99 – fully serviced and well maintained High Specification: Year of Manufacture /new 1999 Model PR8 100/3100 Control Cybelec DNC 900 Hydraulic tool clamping Back gauge Programmable Guards Capacity 100 Ton Maximum length of bend 3100mm / 3metre Tooling top and bottom Wander type footswitch Total 8 axis Y1,Y2,X1,X2,R1,R2,Z1,Z2 – 6axis back gauge Crowning Tooling package included  We can quote for delivery and installation complete with operator training Ljdpfx Ajvw Ay Neb Noah We can advise and supply brand new tooling to produce your sheet metal products on this cnc press brake

Condition: good (used), Year of construction: 2007, functionality: fully functional, controller manufacturer: Amada, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, FOR SALE: Amada HPF 100-3 CNC Hydraulic Press Brake Amada HPF 100-3 – Reliable CNC Press Brake for Heavy-Duty Sheet Metal Work We are offering a used Amada HPF 100-3 CNC hydraulic press brake in [good / fully operational] condition. This is a well-established machine from one of the world’s leading manufacturers of sheet metal machinery, ideal for a wide range of industrial bending operations. Key Specifications - Pressing force: 100 tonnes (1,000 kN) - Maximum bending length: 3,100 mm - Distance between frames: 2,700 mm - Stroke length: 200 mm - Throat depth: 420 mm - Open height: 470 mm - CNC control: Amada Operateur / OP 2000 - Number of axes: 7 (Y1, Y2, X, R, Z1, Z2 + crowning) - Motor power: 9–11 kW - Approximate machine weight: 6,750 kg Machine Details - Year of manufacture: 2002 - Condition: Good! - Tooling included Why Buy This Machine? Lasdpfxoy Hf Tps Ab Noh The Amada HPF 100-3 is a robust and precise hydraulic press brake engineered for demanding, high-volume production environments. The Amada CNC control simplifies the programming and storage of complex bending sequences, making it ideal for both batch and repeat production. With a bending length of 3,100 mm and a capacity of 100 tonnes, it covers the majority of industrial sheet metal forming requirements.

Condition: good (used), Year of construction: 1997, Used Beyeler press brake Lajdjz H Udlspfx Ab Noh Type PR10 200 4100 Capacity 4100 x 200 tons Cybelec CNC control Y1, Y2, X, R, Z1, and Z2 axes CNC-controlled Wila upper and lower clamping system Tools not included

Condition: excellent (used), Year of construction: 2009, Used 3-meter Safan E Brake Type: E Brake 100 3100 TS1 Capacity: 3100 x 100 tons E Control CNC control system Laedpfszz N R Esx Ab Nsh Y1, Y2, X, R, Z1, and Z2 CNC control Wila New Standard hydraulic top clamping system Year of manufacture: 2009 New PC installed

Condition: used, Year of construction: 2001, 3 x Trumpf bending machines (hydraulic press brakes): • TrumaBend V50 | Year of manufacture 1997 • TrumaBend V85 | Year of manufacture 1997 • TrumaBend V85 S | Year of manufacture 2001 Condition & Maintenance: As can be seen in the attached images, all machines have been regularly maintained as part of the annual safety inspection (UVV). The last inspection for all units took place in the summer of 2026. The machines are currently still in operation and are fully functional. Inspection & Contact: Ljdpfez Tfmrsx Ab Nsah An on-site inspection is possible on weekdays until 2:00 PM.

Condition: good (used), Year of construction: 1989, machine/vehicle number: 4113, functionality: fully functional, operating hours: 4,109 h, overall weight: 6,600 kg, Hydraulic press brake Manufacturer: DoneWell, Hahn & Kolb Stuttgart Type: 80 - 2500 Year of manufacture: 1989 Control system: Cybelec Model Eva Pac Max. working width: 2500 mm Max. clamping force: 100 t Back gauge: 750 mm with 2 stop fingers Condition: good Ledpfx Abezyanlj Nsah Die: Multi V 7 angle Tools

Condition: excellent (used), pressing force: 100 t, table width: 3,000 mm, working length: 3,000 mm, Used high quality very clean Ursviken EKP Optima 100 3.1 / 2.55 3metre x 100ton cnc pressbrake for sale Used Ursviken cnc pressbrake for sale – Video at the bottom of the listing Pullmax Ursviken Optima EKP CNC 100 3.1/ 2.55 Press brake cnc Laodpfx Abjtwyuue Noh Specifications Tonnage 100 T Folding length 3100.0 mm / 3metre CNC Cybelec DNC 7000 Control 6axis in total Complete with integrated hemming table to produce safety edges and flashings at 3metre length Back gauge: 2 fingers on the backstop Fully serviced. Complete with a large selection of tooling as per photographs —————- Weight 8400.0 kg State: good condition PULLMAX URSVIKEN EKP CNC 100 3.1 / 2.55 100 ton x 3100mm Downstroke 6 Axis CNC Press Brake for sale Cybelec DNC 7000 Control Guards sick Axis: y1, y2, r, x, z1 and z2 and controlled on the Cybelec control

Condition: good (used), Description: The machine is in good technical condition, and a test run is possible upon prior agreement. Tooling included. Distance between uprights: 3,700 mm. Stroke: 320 mm. Maximum opening between table and ram: 535 mm. Upright overhang: 510 mm. Width of work table: 90 mm. Approach speed: 140 mm/s. Working bending speed: 10 mm/s. Return speed: 140 mm/s. Range of back gauge X: 820 mm. Range of R-axis: 150 mm. Main motor power: 18.5 kW. CNC control: Delem DA-65. Lubrication: central. Weight: approximately 20,800 kg. Laedpfsz S Hw Aox Ab Njh

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 7771, functionality: fully functional, pressing force: 100 t, stroke length: 300 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, table height: 900 mm, throat depth: 1,000 mm, total width: 3,100 mm, overall weight: 8,900 kg, travel distance X-axis: 1,000 mm, controller model: EC20 - graficzne 2D, working width: 3,000 mm, bending force (max.): 100 t, back gauge: 1,000 mm, back gauge speed R-axis: 250 mm/s, back gauge travel distance R-axis: 200 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 3,000 mm, control type: CNC control, degree of automation: semi-automatic, back gauge adjustment: CNC-controlled, number of axes: 4, actuation type: electric, Equipment: CE marking, emergency stop, european tool clamping system, safety light barrier, Servo-electric press brake SAFANDARLEY type E-Brake 100-3100 NS (100T - 3060 mm) AMADA tooling system Manufacturer: Netherlands - Lochem We are the official representative of SafanDarley in Poland. Laedpfxjylt Ukj Ab Nsh - Servo-electric drive - Press force: 100 T - Bending length: 3060 mm - Stroke: 300 mm - CNC control in axes Y1 / Y2 / X / R / Z1 / Z2 - CNC-controlled backgauge with 4 axes - X / R / Z1 / Z2 - 2D graphical control - EC20 model - Programmable light curtain - AMADA tooling system - WILA tooling system - lower clamp compatible with 4V / 2V / 1V / T-type dies, 60 mm base - Lower table crowning compensation

Condition: good (used), Year of construction: 2002, Used 2-meter CNC press brake Type: V85 Capacity: 2050 x 85 tons Delem CNC control Year of manufacture: 2002 Stroke length: 365 mm Y1, Y2, X1, X2, R1, R2, Z1 and Z2 CNC controlled Automatic Wila NS clamping system Adjustable table CNC crowning Laodjz Hwi Rspfx Ab Njh

Year of construction: 2003, condition: excellent (used), High quality, very clean used Edwards Pearson Beyeler Pr 8 8axis cnc pressbrake for sale with hemming table Very late Edwards Pearson BYSTRONIC PR8 100 x 3100 100 ton x 3100mm 8 Axis CNC Hydraulic Down stroke Press Brake complete With Cybelec Modeva 1200 Control. Late Edwards Pearson the year before they became Bystronic Manufactured 2003 – fully serviced and well maintained High Specification: Year of Manufacture /new 2003 Model PR8 100/3100 Control Cybelec Modeva 1200 Hydraulic tool clamping Back gauge Programmable Guards Capacity 100 Ton Maximum length of bend 3100mm / 3metre Max stroke 215mm Rapid approach 180mm/s Tooling top and bottom Wander type footswitch Total 8 axis Y1,Y2,X1,X2,R1,R2,Z1,Z2 – 6axis back gauge With hemming table to Dutch fold / produce safety edges and flashings Lajdpfopky S Hjx Ab Nsh Crowning We can quote for delivery and installation complete with operator training We can advise and supply brand new tooling to produce your sheet metal products on this cnc pre

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, pressing force: 80 t, stroke length: 290 mm, operating speed: 90 mm/s, table height: 950 mm, throat depth: 1,000 mm, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, overall weight: 6,800 kg, controller manufacturer: Safan, controller model: TS1, working width: 2,550 mm, bending force (max.): 80 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, warranty duration: 3 months, control type: CNC control, actuation type: electric, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. SAFAN E-Brake Servo-Electric Press Brake Force: 800 kN (80 tons) CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Upper Beam Approach Speed: 90 mm/s Upper Beam Accuracy: +/- 0.01 mm Maximum Backgauge Finger Speed: 350 mm/s Maximum Backgauge Range (third reference point, X-axis): 1000 mm Hydraulic Upper Tool Clamping: WILA Connected Load: 11 kW Machine Weight: 6,350 kg Machine Width: 3,450 mm Machine Depth: 1,820 mm Machine Height: 2,510 mm Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts Ledjut S E Njpfx Ab Nsah

Condition: like new (used), Year of construction: 2022, pressing force: 100 t, A well-maintained and regularly serviced TRUMPF press brake is available. Number of strokes: approximately 860,000. Ljdpov E Nvaofx Ab Njah The machine is in continuous operation, so it can be inspected and tested at our facility. The stated price is the net amount.

Condition: like new (used), Year of construction: 2017, oil tank capacity: 150 l, Equipment: documentation/manual, Durma AD-S 30100 CNC Hydraulic Press Brake (2017) – 100t x 3050mm Description: For sale is a high-quality, well-maintained, and fully operational Durma AD-S 30100 CNC hydraulic press brake from the year 2017, directly from production. The machine is regularly serviced, extremely precise, and ready for immediate use. Factory Technical Specifications: Year of Manufacture: 2017 Bending Force: 100 tons Bending Length: 3050 mm Machine Dimensions (L × W × H): 4500 mm × 1900 mm × 2900 mm Machine Total Weight: 8500 kg Hydraulic Oil Capacity: 150 liters Operating Hours: [10051] hours Equipment and Features: CNC Control: Modern, large-sized graphic touchscreen controller (Delem / Durma) on a swiveling console, with 2D/3D bending simulation. Axis Configuration: CNC-controlled Y1, Y2, X, and R axes. Crowning: CNC-controlled automatic table crowning system for uniform bending angles across the entire length. Safety: Factory-installed, premium laser hand and finger protection in the work area. Accessories: The upper bending die (punch) and lower die/matrix system shown in the pictures are included with the machine and are part of the price. The machine can be inspected and tested in operation at our facility by prior arrangement. The buyer is responsible for arranging transport and dismantling. Asking Price: 45,000 EUR + VAT Laedpfxezd U Tds Ab Njh Location: [City / Hungary]

Condition: good (used), Year of construction: 2011, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Distance between uprights: 932 mm Overhang: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-axis working speed: 10/25 mm/sec Y-axis rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805 x 1330 x 2380 mm TruBend 7036 Cell Edition Standard equipment: TruBend 7036 Cell Edition: - Electromechanical direct drive (torque motor) - Rear stop system with 6 axes and stop sensors - Positionable Wila tool clamping system - Control cabinet air conditioning Lsdpfx Aszwla Ujb Nsah BendMaster: - Stable base and manipulator - Load capacity 15 kg, max. sheet weight 3 kg - Floor-mounted track, welded construction with stable guide rail - Travel range 3215 mm - Gripper coupling on the BendMaster - Electric drives - Tongs with jaws LoadMaster Bend: - Handling system - Multi-suction device - Double sheet detection and singulation - Transfer system - System pallet Safety: - Protective enclosure with pivoting sliding doors Control: - PC control with 19" touchscreen - Mobile operating terminal - Network connection - Remote service via the Internet

Condition: good (used), Year of construction: 1991, machine/vehicle number: P 10106, Offer 26338 Technical data: - Max. working length: 3340 mm - Stand opening: 2600 mm Lasdpsz R Rkfsfx Ab Noh - Max. pressing force: 100 t - Overhang: 400 mm - Max. stroke: 100 mm - Max. installation height: 370 mm - Table height (approx.): 960 mm - Approach speed / rapid traverse: 85 mm/s - Pressing speed: 10 mm/s - Retraction speed: 80 mm/s - Drive power: 9.5 kW - Space requirement (approx.): W 3500 x H 2350 x D 1950 mm - Weight (approx.): 6.8 t - Including: - CNC control system DELEM DA 58 - Rear stop 0 - 600 mm

Year of construction: 2000, condition: good (used), High quality used Edwards Pearson pr6 7axis cnc pressbrake for sale Video at the bottom of the listing Edwards Pearson PR6 100/3100 CNC Pressbrake 3metre x 100ton / 3100mm New / Year 2000 5 axis back gauge – z1, z2, x, x1 and r axis – 7axis in total – multi axis Taper finger / tapered finger Crowning Cybelec CNC control Lsdpjpr U Tdsfx Ab Neah Machine in good working condition Fully serviced The machine is currently working in production and will be brought into our works to be checked, tested and carry out a cosmetic overhaul. We can deliver to your works, install and offer tuition with your operators as well as quote new tooling to make your sheet metal products on this machine.

Condition: used, Year of construction: 1991, machine/vehicle number: 91033420, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, year of last overhaul: 2020, working width: 3,050 mm, We offer this used HACO TS 3006 guillotine shear and press brake, manufactured in 1991. Manufacturer: HACO Type: TS 3006 Year of manufacture: 1991 Voltage: 380 V Capacity: 3050 x 6 Serial number: 91033420 Electric length stop Ljdpfxozdzh Uj Ab Nsah Sale exclusively to businesses, with exclusion of any warranty, guarantee, return or conversion, to the extent permitted by law. The machine is sold in its current condition ("as is"). Information regarding technical data, condition, operating hours, accessories and possible applications is provided to the best of our knowledge, but without any guarantee of completeness or accuracy. The buyer is responsible for transport, installation, commissioning, maintenance, compliance with all safety regulations and legal requirements, as well as the intended use of the machine. Any claims arising from product liability, manufacturer's warranties or services are subject exclusively to the terms and conditions of the respective manufacturer. The transfer of risk occurs upon collection of the machine (EXW). If you have any questions or require further information, please feel free to send us a message or call us.

Condition: as good as new (ex-display), overall weight: 7,700 kg, United Austrian Iron and Steel Works press brake Type: AG BAHM 100 4 Capacity: 4000 x 100 tons Weight: 7700 kg The machine can be placed in a museum and is sold as is, where it is. Lasdjz Hbu Rspfx Ab Njh

Condition: new, Year of construction: 2026, functionality: fully functional, power: 8.5 kW (11.56 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 110 t, oil tank capacity: 200 l, total length: 3,850 mm, total width: 1,650 mm, total height: 2,680 mm, overall weight: 7,500 kg, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, CNC press brake 110 t × 3200 mm – MTP SPB 110/3200 with Delem DA-66S, 6+1 axes – NEW, IN STOCK New electro-hydraulic servo-synchronised CNC press brake with 1100 kN bending force and 3200 mm worktable, controlled by the Delem DA-66S 24" touch-screen CNC with 3D graphics. 6+1 CNC axes (Y1, Y2, X, R, Z1, Z2 + V crowning), servo main drive, laser safety guard. The machine is in stock in our warehouse and ready for immediate dispatch. KEY FEATURES • Delem DA-66S CNC: 24" full-touch colour screen, 3D graphics, automatic bend-sequence calculation, Profile-S2D offline software • 6+1 axes: Y1, Y2 (ram), X, R (back gauge depth/height), Z1, Z2 (finger positioning) + V (CNC crowning) • Electro-hydraulic servo synchronisation of Y1/Y2 with GIVI (Italy) linear scales on both sides, resolution 0.005 mm • ESTUN servo main motor – up to 60% energy saving, quiet operation • Rexroth hydraulic valve block and pump, NOK seals, EMB fittings • CNC motorised wedge crowning (V axis) – automatic deflection compensation along the full table length • Servo back gauge on Taiwan ball screws and double linear guides, 3-section adjustable stop fingers • Upper tool quick clamping (accuracy 0.02 mm), height-adjustable front sheet supports • Safety: DSP (Italy) laser guard, rear light curtain, KACON foot switch, Schneider electrics • Rigid frame verified by FEA, machined in one set-up on a CNC gantry machining centre TECHNICAL DATA • Nominal force: 1100 kN (110 t) • Worktable length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 400 mm • Ram stroke: 200 mm • Max. opening height: 480 mm • Ram speed: rapid approach 180 mm/s, working 13 mm/s, return 170 mm/s • Ram repeatability: ±0.01 mm; positioning accuracy ±0.02 mm • Back gauge repeat positioning accuracy: ±0.02 mm Lajdpfxjz I S Dre Ab Noh • Workpiece straightness: 0.3 mm/m • Main motor: 8.5 kW servo • Dimensions (L × W × H): 3850 × 1650 × 2680 mm • Weight: approx. 7 t • Year of manufacture: 2026, CE marked STANDARD DELIVERY Press brake, levelling bolts, foot switch, operation manual, CNC manual, hydraulic and electrical schematics, foundation drawing, CE certificate. Condition: new. In stock – immediate dispatch. Terms: price net, EXW Sokołów Podlaski, Poland. 12 months warranty on parts. Documentation and manual included. Transport can be arranged to any European destination – delivery quote on contact.

Year of construction: 2005, condition: like new (used), Quality used Bystronic Pr 100 8axis cnc pressbrake for sale BYSTRONIC PR100 x 3100 100 ton x 3100mm 8 Axis CNC Hydraulic Down stroke Press Brake complete With Cybelec Modeva 10S Control. Manufactured 2005 – fully serviced with Bystronic uk from new Specification Year of Manufacture /new 2005 Control Cybelec Modeva 10S Back gauge Programmable Guards Fiessler AKAS Capacity 100 Ton Maximum length of bend 3100mm / 3metre Extended Daylight – to be confirmed Max stroke 315mm Rapid approach 180mm/s Bending cycle 10mm/s Rapid return 150mm/s Tooling top and bottom Wander type footswitch Total 8 axis Y1,Y2,X1,X2,R1,R2,Z1,Z2 – 6axis back gauge Hydraulic Crowning Ledpfjhufktex Ab Neah We can quote for delivery and installation complete with operator training We can advise and supply brand new tooling to produce your sheet metal products on this cnc press brake