Used press brakes with 200-299t bending force for sale (177)

Condition: used, functionality: fully functional, Year of construction: 1999, stroke length: 180 mm, overall weight: 16,000 kg, power: 17 kW (23.11 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, pressing force: 220 t, table width: 4,000 mm, type of input current: three-phase, We offer this used Amada HFBO press brake, manufactured in 1999. Date of manufacture: 01.10.1999 Serial number: HFBO22040H991018 Bending length: 4,000 mm Maximum force: 2200 kN Maximum stroke: 180 mm Voltage: 400/415 V Frequency: 50 Hz Installed power: 17 kW Rated current: 35 A Number of phases: 3 Machine weight: 16,000 kg Tjdpfx Aszzknrobujd Machine stopping time: 80 ms Machine stopping distance: 9 mm If you have any questions or require further information, please send a message or contact us by phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, controller manufacturer: Cybelec, controller model: DNC 1200, bending force (max.): 200 t, stroke length: 215 mm, number of axes: 6, type of crowning: CNC-controlled, power: 15 kW (20.39 HP), Equipment: CE marking, european tool clamping system, foot remote control, lower tooling, upper tooling, Used high quality very accurate Edwards Pearson PR6 200/4100 6axis CNC Pressbrake for sale New / Year 2001 Model PR6 200/4100 Total axis: 6 axis complete with Crowning Capacity: 4.1m x 200ton / 4100mm x 200ton Fully serviced Very late Pr machine before Bystronic pressbrakes Upper Euro Tool Clamps Complete with with: Cybelec CNC Control with Colour Graphics Y1, Y2, X, R, Z1, Z2 Max stroke 215mm Sick Infrared Lightguards Full set of Top and Bottom Tooling With crowning Todpfex Avbyox Abued

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, working width: 4,060 mm, stroke length: 300 mm, throat depth: 1,000 mm, distance between stands: 4,200 mm, operating speed: 90 mm/s, table height: 1,000 mm, back gauge travel distance R-axis: 150 mm, overall weight: 17,000 kg, total length: 5,300 mm, total width: 1,950 mm, total height: 3,000 mm, warranty duration: 6 months, pressing force: 200 t, Equipment: safety light barrier, SAFANDARLEY E-Brake press brakes have an electric drive. Lenze servomotors controlled by inverters from the same company allow for fast and reliable operation of the system. Additionally, the machine consumes electricity mainly when the slider goes down. The slider returns using the force resulting from the spring package on both sides of the machine. When the machine is not in use, it does not consume electricity because there is no pump in the system as in hydraulic presses. Electricity consumption is estimated at 70% lower than in conventional hydraulic presses. Servo-electric press brake SAFANDARLEY model E-Brake Pressure 3000 kN (300 tons) Slider stroke 300 mm Opening Q=690 mm Upper beam exit speed 90 mm/s Upper beam accuracy +/- 0.01 mm Todsvpqpiepfx Abujd CNC controlled axes: Y1-Y2 - upper beam control with the possibility of using skews X - bumper beam exit (gives the dimension of the bent element). Very high positioning accuracy. delta X - independent bumper finger used for skewing R - bumper beam top/bottom, stroke 200mm Z1-Z2 - bumper fingers sliding along the bending line (speed 2000mm/s) Max bumper finger speed 350mm/s Max bumper finger range (third reference point range in X axis) 1000mm R axis bumper range 200mm Connected power 22kW (controlled by inverter) Weight 17,000kg Machine width 5,300 mm Machine depth 1,950 mm Machine height 2,810 mm Power supply 3/N/PE 50Hz – 400/230V Servo-electric drive (without hydraulic system) Drive transmission by means of belts

Condition: good (used), Year of construction: 1999, Used conventional press brake from Ermaksan Type AP 3600 200 Capacity 3600 x 200 tons NC control with adjustable back gauge and stroke Includes a set of tools as shown in the picture. Tjdpfe Adpq Isx Abued

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 183 h, control type: CNC control, controller manufacturer: CYBELEC MODEVA BAC 2D Control, controller model: CYBELEC MODEVA BAC 2D Control, bending force (max.): 290 t, working width: 4,000 mm, Equipment: documentation/manual, BOSCHERT G-Bend Plus 4290 Tjdpfsywfp Sjx Abujd

Condition: good (used), Year of construction: 2019, pressure 220 t chamfer lenght 4100 mm distance between columns 4100 mm stroke of upper beam 400 mm dayligth 570 mm working feed 21.0 mm/sec return speed 200.0 mm/sec work height max. 970 mm Control LVD Touch-B CNC 18" total power requirement 37.0 kW weight 27500 kg range L-W-H 5100 x 1950 x 2850 mm well-maintained condition (!!) Special price on request Equipment: - CNC electro-hydraulic press brakes * Intuitive, touchscreen-based user interface * Simple navigation * Tool and program library * X-axis control and position display * Y-axis control and position display * Swiveling control panel (front left) - CNC-controlled - CNC electric backgauge (X-axis) * CNC electric gauge fingers (R-axis) * Includes height adjustment (R-axis) * Intelligent tool storage (automatic tool changing) * Bending aid - LVD upper tool holder * Hydraulic upper tool clamping - LVD lower tool holder * Hydraulic die clamping - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Machine documentation ToolCell is a fully equipped hydraulic press brake with an integrated automatic tool changer. It is the ultimate bending solution for small to medium-sized batches, high product variety, and increased workpiece complexity. Tsdpfx Ajzu A Rxobusd

Condition: good (used), Year of construction: 2012, Used press brake from Knuth Capacity: 4100 x 250 tons Cybelec DNC 880S CNC control Tsdszz Rz Sepfx Abued Y1, Y2, X and R axis CNC Hydraulic crowning Amada / Euro top clamp 1 set of complete tooling

Condition: used, functionality: fully functional, Year of construction: 1992, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, pressing force: 250 t, table length: 4,050 mm, type of input current: three-phase, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) Tjdpjy D Sy Rjfx Abujd - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1974, machine/vehicle number: 5470, stroke length: 250 mm, throat depth: 300 mm, table height: 800 mm, overall weight: 14,000 kg, total length: 3,500 mm, total width: 2,000 mm, total height: 3,550 mm, input voltage: 380 V, input frequency: 50 Hz, pressing force: 200 t, clearance between the columns: 2,550 mm, distance table to ram: 500 mm, ram plate length: 3,000 mm, table length: 3,000 mm, table width: 250 mm, Equipment: documentation/manual, Force: 2000 kN Working length: 3000 mm Distance between uprights: 2550 mm Tjdpfx Aezzxduobujd Stroke: 250 mm Distance table – ram: 500 mm Gap: 300 mm Table width: 250 mm

Condition: ready for operation (used), Year of construction: 2023, number of axes: 3, overall weight: 14,750 kg, total width: 1,770 mm, total height: 3,000 mm, pressing force: 224 t, product length (max.): 5,250 mm, This 3-axis Durma AD-S 40220 press brake was manufactured in 2023. It features a pressing force of 220 metric tons and a bending length of 4050 mm. The machine is equipped with a servo-motor-driven backgauge system and a CNC control unit with a 15" touchscreen. If you are looking to get high-quality bending capabilities, consider the Durma AD-S 40220 press brake we have for sale. Contact us for further details. Todpfx Ajz D Dhnebued - Pressing Force: 220 metric tons- Distance Between Columns: 3600 mm- Bending Stroke: 265 mm- Installation Height: 530 mm- Side Column Overhang: 450 mm- Controlled Axes: 3 axes (Y1, Y2, X)- CNC Control Unit: DT-15 CNC CONTROL (15" 2D graphic display, touchscreen, USB ports, PC software, graphical product/tool memory)- Backgauge Drive System: Servo-motor-driven backgauge on linear guides and ball screws- Backgauge Finger Blocks: Double linear guides- Backgauge X-axis Speed: 500 mm/s- Backgauge R-axis Speed: 350 mm/s- Backgauge R-axis Travel: 250 mm- Axis Position Accuracy: 0.01 mm- Y-axis Rapid Traverse: 160 mm/s- Y-axis Working Speed: 10 mm/s- Y-axis Retraction Speed: 140 mm/s- Hydraulic Drive System: Yes- Main Motor Power: 22 kW- Operating Voltage: 400 V- Control Voltage: 24 V- Main Fuse Current / Rated Current: 100 A- Frequency: 50 Hz- Short Circuit Breaking Capacity: 10 kA- Oil Tank Capacity: 250 L- Table Height: 900 mm- Table Width: 104 mm- Safety System: Fiessler AKAS laser safety device mounted on the upper beam- Crowning: CNC-controlled crowning- Upper Tooling: Upper die 1010/A/75°, split and offset- Lower Tooling: 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm)- Support Arms: Sheet metal support arms on linear guides- Compliance: CE compliant Technical Specification Bending Length 4050 mm

Condition: used, Year of construction: 2014, pressure 170 t chamfer lenght 3050 mm distance between columns 2550 mm column arm 405 mm stroke of ram 400 mm distance between table / ram 320-720 mm Tsdpfx Abs Advb Hsuod feed down max. 220 mm/sec feed bending max. 10 mm/sec feed up max. 220 mm/sec connected load 27 kVA total power requirement 18,5 kW weight of the machine ca. 13.600 kg

Condition: used, Year of construction: 2005, Used 3.6-meter CNC press brake by Ermaksan Todozh Icyspfx Abuod Type: AP 3600 x 200 Capacity: 3600 x 200 tons Elgo NC control system 1 set of tooling Year of manufacture: 2005

Condition: excellent (used), Year of construction: 1999, stroke length: 3,060 mm, throat depth: 410 mm, operating speed: 11 mm/s, reverse speed: 135 mm/s, overall weight: 18,209 kg, total length: 2,310 mm, total width: 3,660 mm, total height: 3,095 mm, power: 30 kW (40.79 HP), pressing force: 230 t, clearance between the columns: 2,690 mm, table width: 200 mm, CNC Crowning Hydraulic MODUFIX Tool clamping Hydraulic lower tool clamping CNC Finger Backgauge Z1 and Z2 Tjdpfx Ao Aa It Tsbued 6 Axis backgauge X1/X2, R1/R2 and Z1/Z2 Network card BNC-with RJ-45 Connector ToPs 600 Software Set Tooling  Max. bending length: 3060mm Distance between column: 2690mm Max. pressing force: 230T Dis. Beam - Table: 535mm Beam stroke: 365mm Table Width: 200mm Troth beam: 410mm Approch speed: 200mm/min. Working speed: 11mm/min. Return speed: 135mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 9 Crowning: yes Hydraulic toolclamping: yes Power: 30kW Length: 2310mm Width: 3660mm Height: 3095mm Weight: 18209kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1987, pressure 100 t Working width max. 300 mm Tsdpfx Ajzr Rq Uebusd serial number 55505 voltage 380 V weight 5000 kg

Condition: used, functionality: fully functional, Year of construction: 2002, stroke length: 350 mm, throat depth: 500 mm, operating speed: 80 mm/s, reverse speed: 90 mm/s, overall weight: 16,500 kg, total length: 4,650 mm, total width: 2,150 mm, total height: 3,200 mm, input voltage: 380 V, pressing force: 160 t, clearance between the columns: 3,300 mm, table width: 4,175 mm, Equipment: CE marking, documentation/manual, safety light barrier, CYBELEC DNC 80 control system 6 controlled axes: Y1-Y2-X-R-Z1-Z2 Todpezybrrofx Abujd Active hydraulic compensation LASER safety barriers Standard tool kit CE marking

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 35,295 h, bending force (max.): 230 t, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system, 2-axis, with rack and pinion drive for X and R axis - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping", manual, hardened, self-centering; for vertical tool change - Lower tool holder with hydraulic clamping, hardened Lower tool movement - Lower tool movement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000, graphical - Workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15" touch screen - Network-enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system, 5-axis (X, X1, R, Z1, Z2) + Upper tool clamping, hydraulic + CNC crowning Todpfxez Rmabe Abuod + BendGuard + Additional foot switch + 2 support consoles + 1 MobileControl + ACB prepared

Condition: used, total length: 4,600 mm, total width: 1,800 mm, total height: 2,780 mm, Year of manufacture: 1989 Colour: Beige Weight: 13.000 kg - Year: 1989 - Serial number: 121068 - Drive system: CNC - Control system brand: Delem - Control system type: DA-24e - Power [kW]: 15.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 200 - Max. working width [mm]: 3100 Tjdpfjz Rzqhsx Abusd - Column gap [mm]: 2650 - Backgauge depth [mm]: 800 - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 4600mm x 1800mm x 2780mm (l x w x h) - Transport weight [kg]: 13000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of manufacture: 2023 Price: On request - Year: 2023 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Drive system: CNC - Control system brand: Delem - Control system type: DA-66T - Power [kW]: 52.6 - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 240 - Max. working width [mm]: 4100 - Column gap [mm]: 3600 - Throat depth [mm]: 410 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 260 - Crowning system: CNC-controlled Tedpfx Aszcmrkjbued - Punch holder: Quick-release - Tools included: Yes - Control type: Delem DA-69T - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), functionality: fully functional, Year of construction: 2022, Equipment: CE marking, documentation/manual, Capacity: 4050 mm x 175 Ton Distance between frames: 3600 mm Stroke: 265 mm Control: DURMA DT15 (3D Touch Screen) Serial No.: 73362219436 Dimensions: 5200 x 1900 mm Tjdpfx Aboyrdgqeued Height: 2930 mm Weight: 12,750 kg

Condition: good (used), Year of construction: 2008, pressure 200 t chamfer lenght 4100 mm distance between columns 3150 mm stroke of upper beam 200 mm dayligth 425 mm throat 300 mm working feed 9.0 mm/sec return speed 90.0 mm/sec work height max. 980 mm back stop - adjustable ca. 700 mm Control PPS-TS Touch oil volume 350 l Todpfxszndq Hs Abued total power requirement 18.0 kW weight 12.000 kg range L-W-H 5100 x 1950 x 2850 mm Well-maintained condition (!!) Current new price approx. € 110.000 Special price on request - in checked conditions - machinevideo - ?v=ZX9Ap23e__s Equipment: - CNC electro-hydraulic press brakes - with LVD CNC "PPS-TS TOUCH" control unit * intuitive, touchscreen-based user interface * simple navigation * tool and program library * X-axis control and position display * Y-axis control and position display * swivel-mounted control panel (front left) - CNC-controlled axes: Y1/Y2 + X - CNC motorized backgauge (X-axis) * with 4 manually adjustable gauge fingers * includes lateral and height adjustment (Z and R axes) - LVD upper tool holder * sectionalized goose-neck upper tool - LVD lower tool holder * sectionalized 1V die - 2x front support arms - side safety guards (swiveling doors) - rear safety guard (swiveling door) - 1x movable foot pedal - machine documentation (NL)

Condition: excellent (used), Technical specifications: Working length: 4100 mm Tjdpsz E A Suefx Abuod Frame width: 3650 mm Press force: 220 tons CNC control: OPERATOR OPII graphic Color screen size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back gauge Overhang: 300 mm Stroke: 180 mm Automatic crowning Motor power: 17 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 17 tons Accessories: New AMADA tools Condition: The machine is in very good overall condition. Retrofit in January 2026. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, Year of construction: 1992, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Control system: LVD MNC 95 Total power consumption: 14 kW Tjdpfx Absz I N Hwjuod Machine weight (approx.): 7,700 kg

Condition: used, Year of construction: 1992, pressure 0200 t Tjdpfxeyy A D Se Abujd chamfer lenght 3100 mm distance between columns 3000 mm stroke length max. 400 mm feed down 160 mm/sec feed up 140 mm/sec feed under pressure 10 mm/sec oil volume 500 l dayligth 600 mm Control ModEva 12 S Cybelec throat 250 mm total power requirement 28 kW weight of the machine ca. 18,5 t dimensions of the machine ca. 4,5 x 2,7 x 3,4 m Electric hydraulic machine with Cybelec ModEva 12S control, some accessories, foot and two hand switch pane and safety arrangements. Machine has been verhauled and modernized in 2009 !! Machine is floor standing. Machine has 9 controled axes and a Laser controled crowning arrangement.

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 40225, control type: CNC control, actuation type: hydraulic, bending force (max.): 225 t, Hydraulic CNC press brake from the brand HACO, model 40225, year of manufacture 1998. The machine has a nominal pressing force of approx. 225 tons and a working width of approx. 4,000 mm. Equipped with CNC control and electric backgauge, suitable for precise bending of steel and other sheet materials. Features European tool clamping system. Suitable for heavy-duty sheet metal processing in an industrial environment. The machine is offered in used condition. Todpfx Aoyhxtusbujd

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1982, machine/vehicle number: 10710, HYDRAULIC PRESS BRAKE LVD PPN 300/30 Year of manufacture: 1982 Serial number: 16270 TECHNICAL SPECIFICATIONS Maximum capacity: 3000 kN Working length: 3000 mm Distance between uprights: 2550 mm Ram stroke: 250 mm Maximum distance between ram and table: 500 mm Gap: 300 mm Table width: 250 mm Tedpfx Aezzxgcsbued Approach speed: 80 mm/s Working speed: 8.8 mm/s Return speed: 96 mm/s Main engine: 22 kW Weight: 16000 kg NC controller: ELGO X-Y  Solid back gauge with range on X axis: 600 mm  2 fingers on back gauge  2 front supports of 1000 mm TOOLING: a. Multi-V M130, Length: 3050 mm b. Toolholder LVD Classic 15 to LVD Classic 15, Length: 3050 mm c. Straight top tool R15 H130 86°, Length: 3050 mm d. Gooseneck top tool D15 H130 86°, Length: 3050 mm e. Straight top tool R15 H130 26°, Length: 3050 mm