Used press brakes with 50-74t bending force for sale (72)

Condition: ready for operation (used), Year of construction: 2001, pressure 50.0 t chamfer lenght 2090 mm distance between columns 1665 mm column arm 400 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 92.0 mm/sec stroke 200 mm table height 910 mm dayligth 470 mm Number of working hours 36.160 h total power requirement 6.0 KW weight of the machine ca. 4850 kg range L-W-H 3458 x 2450 x 2450 mm Nwedexabutjpfx Anfef with only approximately 36.160 operating hours (!!) - Inspected condition - Machine video - ?v=x8Z0h2_wA6s Equipment: - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) * Hand control unit for manual axes movement * Pivoting control, front left - AMADA/PROMECAM quick clamping system for the upper tool * 1 split set of offset upper tools (UKB 10.512) - AMADA/PROMECAM bottom tool holder * 1x split set of 1-V dies (UKB 20.810) - Side guards (hinged doors) - Rear guards (hinged door) - CE marking - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: used, pressure 60T t chamfer lenght 2000 mm Njdpeylz Dysfx Anfjwf distance between columns / mm height of stroke / mm work feed / mm/s control / total power requirement / kW weight of the machine ca. / t

Condition: used, Year of construction: 1995, pressure 60T t chamfer lenght 2000 mm Nwodpeyk Ikdofx Anfof distance between columns 1640 mm height of stroke 325 mm work feed 15 mm/s control SOMABEND total power requirement 12,5 kW weight of the machine ca. 4,3 t Serial No: 22161

Condition: new, Year of construction: 2026, OSTERBERGER HTAP.Servo Brand new 3-axis CNC press brake equipped with CYBELEC CNC control system CybTouch8, featuring automatic bend angle calculation, bend sequence computation, and full-color graphical display. Maximum pressing force: 630 kN Maximum bending length: 2,000 mm / 2,500 mm / 3,200 mm Distance between side frames: 1,580 mm / 2,080 mm / 2,700 mm Throat depth in side frames: 250 mm Ram stroke: 100 mm Maximum installation height: 320 mm Ram travel speeds: - Down: 50/6 mm/sec - Up: 60 mm/sec Table width: 160 mm Oil tank capacity: 120 liters Approximate dimensions: 2.6 / 3.1 / 3.6 m x 1.5 m x height 2.4 m Motor power: 5.5 kW Weight approx.: 4.8 / 5.5 / 6 t Two-axis precision back gauge - Adjustment range: 500 mm - R-axis: 90 mm Back gauge fingers glide on double linear guides Equipment: - Die block - Gooseneck bending punch - Quick-change upper tool system - 2 support arms on linear guides Nsdoy Afanopfx Anfowf - Bending area lighting

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 230, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, table width: 3,100 mm, table length: 10 mm, year of last overhaul: 2025, Amada hydraulic shear, 3100 mm cutting width, in very good condition, 20 hp, weight 7 t, stroke 190 mm. Nwedpsy Ahpfefx Anfof

Condition: good (used), working width: 2,500 mm, bending force (max.): 60 t, Max. pressing force 60 tons Total working width 2500 mm Working width between columns 2050 mm Throat depth 210 mm Transport dimensions: length 260 cm width 120 cm height 210 cm weight approx. 4 t Nsdpfx Ansymguyofowf Note: The information on this page has been obtained and assembled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we advise you to verify all relevant details. Financial information VAT/margin: Margin: The displayed price includes VAT (VAT not deductible for business customers)

Condition: good (used), Year of construction: 2002, working width: 3,000 mm, bending force (max.): 70 t, control type: manual, LVD PPN 70/30 press brake Max. press force: 70 tons Total working width: 3000 mm Working width between uprights: 2550 mm Throat depth: 210 mm Transport dimensions: length: 380 cm width: 180 cm height: 230 cm weight: approx. 6 t Please note: The information on this page has been compiled to the best of our knowledge and belief, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend that you verify all relevant details. Financial information VAT/margin: Nwedpfx Aneymgr Esfof VAT: The listed price is excluding VAT (VAT is deductible for businesses)

Condition: used, Year of construction: 1995, pressure 60T t chamfer lenght 2000 mm distance between columns 1640 mm height of stroke 325 mm work feed 15 mm/s Njdpfex Tu Szox Anfjwf control SOMABEND total power requirement 12,5 kW weight of the machine ca. 4,3 t

Condition: used, pressure 50 t chamfer lenght 1500 mm Nodpfjra Rrhex Anfswf distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200

Condition: used, Year of construction: 2000, pressure 60 t chamfer lenght 2050 mm distance between columns 1550 mm throat 255 mm stroke 165 mm dayligth 475 mm working feed 9,8 mm/sec return speed 117 mm/sec ajustment speed 150 mm/sec total power requirement 5,5 kW weight of the machine ca. 5000 kg dimensions of the machine ca. 2300 x 1500 x 2470 mm Equipment: - DELEM DA65 CNC control - Electric backgauge (X-axis), 600 mm - Hydraulic upper tool clamping - Front light barrier Nedpfx Ansxrgv Hofjwf - Side and rear protective grilles - Manually adjustable stop bar, foldable (R+Z-axis) - Upper tool - 2x support arms - Machine feet - Operating instructions

Condition: used, Year of construction: 2008, pressure 56.0 t chamfer lenght 1400 mm distance between columns 1300 mm throat 220 mm stroke 200 mm dayligth 485 mm work speed 8.0 - 10.0 m/min return speed 35.0 mm/sec Control CNC Boschert back stop - adjustable 0 - 370 mm work height max. 915 mm Cylinders : 2 Stück voltage 3x 400 V connected load 8.0 kVA weight 3700 kg range L-W-H 2320 x 1280 x 2030 mm very good / well-maintained condition (!!) with lots of bending tools - in checked conditions - machine video - ?v=NrpZs6Ar0Vo Equipment: - NC electro-hydraulic press brake - BOSCHERT NC control unit, front - NC electro-motorized back stop (X axis) * with 2x manually adjustable stop fingers (R+Z axis) - AMADA PROMECAM (SYSTEM A) upper tool holder - AMADA PROMECAM (SYSTEM A) lower tool holder - Handwheel with analog display for adjusting the bending angle Nwodsxaanxepfx Anfjf - lots of insert tools, including tool cabinet - 1x working cylinder = double-acting cylinder - upper beam made from a solid steel plate - pressure gauge for pressing pressure (infinitely adjustable) - 2x front support tables - 1x freely movable foot switch - robust machine base - rear protective device (cover + circuit breaker) - original operating instructions (machine + control)

Condition: new, pressure 60.0 t chamfer lenght 2100 mm distance between columns 1700 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm oil volume 150 ltr. voltage 400 Volt total power requirement 7.5 kW weight 5640 kg range L-W-H 3250 x 1960 x 2750 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC Njdpfxsxabcke Anfjwf - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: used, Year of construction: 2004, pressure 50.0 t chamfer lenght 1275 mm distance between columns 1040 mm column arm 250 mm ram stroke speed 225 mm/sec work speed 0 - 9.8 mm/sec return speed 160 mm/sec work stroke 215 mm dayligth 512 mm table height 800 mm back stop - adjustable 600 mm control DELEM DM 51 operating pressure max. 300 bar oil volume 150 ltr. voltage 400 V engine output 6.0 kW Weight 4300 kg range L-W-H 1930 x 1510 x 2390 mm current new price approx. 80.000 euros special price on request good / well-maintained condition (!!) - in checked condition - machine video - ?v=5L8L2AYv0PU ----- PLACKE electro-hydraulic CNC press brake specially developed for the production of small parts The advantages: • Low energy consumption • High operating comfort • Wide range of applications • Fast, robust, low-noise • With CNC control as standard ----- Equipment: - CNC electro-hydraulic press brake with 1x working cylinder - DELEM CNC control model "DM 51" - CNC controlled axis: Y1 - Y2 - X - CNC electro-motorized back stop * Travel path: X = max. 600 mm Nsdpfx Anjxab U Hjfjwf * Travel speed X axis .. max. 300 mm/s * Positioning accuracy .. +/- 0.02 mm * with 2x manually adjustable stop fingers (R+Z axis) - WILA standard - manual upper tool clamping - WILA standard - manual lower tool clamping - PLACKE safety device at the front: light barrier - side protective device (swivel doors) - rear protective device (swivel + lockable door) - front storage area - side sorting system for bending tools - 1x freely movable foot control - original operating instructions including circuit and hydraulic diagram

Condition: as good as new (ex-display), Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming Nedpfoxabt Aex Anfswf * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 50 t, overall weight: 50,000 kg, working width: 2,500 mm, For sale is a GÉFI LE50/2500, Hungarian-made edge bender in excellent condition, in working condition, can be tested. Technical data of the pres brake : Manufacturer: GÉFI Type: LE 50/2500 Nedpfxsyznhls Anfewf Year of manufacture: 1983 Pressing force: 50 tons Maximum bending length: 2500 mm Dimensions: 2720x1550x2245 mm Weight: 5500 kg We are adding 1 1500 mm and 1 2500 mm knife, these need to be renovated.

Condition: used, Year of construction: 1995, machine/vehicle number: 95/230/004, functionality: fully functional, stroke length: 2,002 mm, table height: 1,030 mm, throat depth: 170 mm, total length: 3,100 mm, total width: 1,700 mm, total height: 2,350 mm, travel distance X-axis: 500 mm, working width: 2,500 mm, bending force (max.): 50 t, control type: CNC control, number of axes: 3, type of crowning: fixed, actuation type: hydraulic, Equipment: emergency stop, foot remote control, lower tooling, safety light barrier, upper tooling, For Sale: Edward Pearson 60-Ton Press Brake £2750 Nwedpfx Anoxupyyofef We’re offering a well-maintained Edward Pearson press brake with a 60-ton capacity and a 2.5-meter bed. This machine comes complete with upper and lower tooling and is in good working condition. It’s been regularly serviced, ensuring reliability and performance. Can arrange video call to view if needed Reason for Sale: We’ve upgraded to a newer model, so we’re selling this reliable machine. COST £2750

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 Nwodpfx Asxpqy Dsnfof CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Nwsdsw Iq Ugspfx Anfjf Weight: 4,700 kg Good condition

Condition: ready for operation (used), Year of construction: 1994, The press brake was manufactured in 1994. The working length is 1250 mm with a pressing force of 600 kN. Manufacturer: Micoda Working length: 1250 mm Press force: 600 kN Nwsdpfx Aop R Irconfef Weight: 4000 kg Power: 10 KW

Condition: used, length: 2750width: 1100heigth: 2050weight approx.: 3500pressure: 50bending length: 2550 CNC Bending Press 3 Axes Y1, Y2, and Z Hydraulic Tool Clamping for the Upper Tool Darley System Technical Details: Machine Type: EHP 50.25/20 Max. Pressing Force: 500 kN Bending Length: 2550 mm Downward Speed: 100 mm/s Max. Pressing Speed: 13.5 mm/s Njdewiatpspfx Anfswf Return Speed: 75 mm/s Stroke Length: 120 mm Cylinders: 2 pcs Motor Power: 5.5 kW Oil Tank: 100 Liters

Condition: good (used), Year of construction: 1994, functionality: fully functional, Used press brake by Darley Nwedpfx Anjxq Dfvofjf Type EHP 50 20 15 Capacity 2050 x 50 tons Equipped with new Esa S630 control and Merlino lasersafe Includes set of tools

Year of construction: 2005, operating hours: 54,000 h, condition: used, pressure 50 t chamfer lenght 1250 mm distance between columns 1020 mm Stroke beam 215 mm Nodpsppdpcsfx Anfjwf 470 mm 300 mm Quick speed,inspeed 150 mm/sec bendingspeed 0-10 mm/sec opening speed 150 mm/sec X-axes 600 mm 200 mm Z1+Z2 axes controlled by cnc manuell,4 Anschlagfinger mm Number of working hours 54000 h Dimensions of machine: length 1600 mm width 1500 mm height 2300 mm weight 4900 kg Control Task total power requirement 9 kW dimensions of the machine ca. 2x2x2,5 m

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Nwedpoh Randsfx Anfef Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-2563-N Estun E21 Specifications - Maximum bending thickness (S235): up to 4.0 mm - Nominal bending force: 630 kN - Maximum bending length: 2500 mm - Throat depth: 250 mm - Maximum stroke: 120 mm - Daylight: 370 mm - Distance between side frames: 2000 mm - Backgauge travel distance: 600 mm - Motor power output: 5.5 kW - Length: 2600 mm - Width: 1400 mm - Height: 2200 mm - Weight: 3700.0 kg Tools Front supports: 2 pcs. Backgauge drive (travel along the X-axis): electric motor Ram drive (travel along the Y-axis): electric motor Punch quick change tooling system form AMADA E21 control (mounted on a swivel arm) Manages the movement along the X axis (backgauge) and Y-axis (ram). Allows to create up to 40 programs Each program can consist of up to 25 steps Intuitive operation using English abbreviations explained throughout the training course. It is a sophisticated but easy-to-use controller that allows operation in three modes: Full manual Semi automatic Hands-free cycle mode Top quality components Rexroth hydraulic valve Schneider electrical components Omron and Schneider safety circuit parts. Steel hydraulic line tubings Hydraulic lines made of steel instead of rubber reduce the risk of future leaks. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Oil cooling system The Oil Cooling System guarantees the stability of the machine's performance even after long, continuous operation. Within the service, our technicians may: Specify the bending steps for intricate parts. Advise on material and gas selection Assist in the selection of operating parameters for different materials Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Hydraulic press brake PBO-2563-CNC OT-41 Specifications - Maximum bending thickness (S235): up to 4.0 mm - Nominal bending force: 630 kN - Maximum bending length: 2500 mm - Throat depth: 250 mm - Maximum stroke: 120 mm - Daylight: 370 mm - Distance between side frames: 2000 mm - Backgauge travel distance: 600 mm - Motor power output: 5.5 kW - Length: 2600 mm - Width: 1400 mm - Height: 2200 mm - Weight: 3700.0 kg Tools - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram drive (travel along the Y-axis): servo motor - Backgauge fingers positioning (R-axis): manual - Punch quick change tooling system form AMADA Otinus CNC OT-41 control The CNC controller Otinus is featured with convenient and intuitive menu. The software calculates the bending angle on its own. The large color touchscreen is readable from any angle. The controller can store up to 2,000 programs of 30 steps each. Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. - Steel hydraulic line tubings - Hydraulic lines made of steel instead of rubber reduce the risk of future leaks. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Oil cooling system The Oil Cooling System guarantees the stability of the machine's performance even after long, continuous operation. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller Nedpfx Ajgi Dphjnfewf - The Client is responsible for the machine during unloading and transporting on-site

Condition: used, Year of construction: 1984, Technical details: pressure: 50 t chamfer lenght: 2550 mm distance between columns: 2045 mm throat: 250 mm stroke: max. 170 mm back gauge - adjustable: ca./approx. 800 mm control: DELEM DA 24 e stroke speed - idle stroke upwards: 80 Hub/min stroke speed - idle stroke downwards: 160 Hub/min total power requirement: ca./approx. 7,5 kW Nedpfx Aneu Ib D Ejfswf weight of the machine ca.: 6,2 t machine dimensions LxWxH: 3,3x1,8x2,7 m - back gauge motorized adjustable - crowning - biggest distance between table and bottom edge of the ram = 600mm - smallest distance between the table and the lower edge of the ram = 430mm The machine has a control malfunction ( DELEM) and will be sold as is! i.D. *