Used radial drilling machines 1300-1999mm arm length for sale (65)

Condition: used, bore capacity in steel (diameter) / mm arm length / mm workpiece height max. / mm total power requirement / kW weight of the machine ca. / t required space / m Ibjdpeud Ttnefx Ah Usf Table dimensions: 800x800mm Height: 590mm

Condition: used, Distance from table to nose: Max (mm) 740 Min (mm) 290 Distance from spindle axis to vertical face of upright: 400mm Spindle motor power: 4 KW Spindle : Ibodpfx Aeummkmjh Uof Stroke 325mm Diameter: 70mm Cone N°: CM4 Dimensions LxWxH : 1700 x 1500 x 250mm Net weight: 1500kg

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Ibsdpfx Aotzctmoh Ujf Technical data: Drilling capacity 80 mm throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Clockwise and counter-clockwise rotation Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Condition: used, Max. drilling diameter in steel: 63 mm Max. distance of spindle axis to casing guide: 2000 mm Ibedpfxot Trbke Ah Uef Vertical adjustment of the arm: 950 mm Spindle speed: 11-2000 /min. 5.5 kW Total machine weight: 6900 kg Including cooling system and drill cube - see photo.

Condition: used, Year of construction: 1977, bore capacity in steel (diameter) 75 mm arm length 1700 mm workpiece height max. 370 - 1700 mm total power requirement 12 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m C S E P E L (Hungary) Radial Drill Model RFh 75/2000 Year 1977 Serial No. 61158 _____ Drilling capacity, Steel / Cast Iron, max. 75 / 90 mm Thread cutting Steel / Cast Iron M 60 / 70 Distance between column and spindle centre, max. 1,700 mm Iodet Hw Uvopfx Ah Usbf Spindle taper ( Morse Cone) MK 5 Vertical stroke of radial arm 380 mm 21 Spindle speeds 19 – 1.900 rpm Base plate 1.100 x 2.300 mm Mounting height, min./max. (base plate) 370 / 1,700 mm Swivelling radius +/- 180 ° Vertical adjustment of radial arm 950 mm Horizontal adjustment of drilling slide 1.500 mm 12 Drilling feeds 0.047 - 2 mm/rev Spindle drive, approx. 10 kW Total electrical load 12 KW - 380 V - 50 Hz Weight 7.000 kg Accessories / Special Features: * Preselector for the Spindle speeds, hydraulically actuated * Choice of Feed rate mechanically * Drilling with or without infeed, respectively manually by a fine feed device/resp. by handwheel * Drill head slide adjustable on radial arm manually, vertical Radial arm adjustment Motorized. * Depth of infeed adjustable by stop dogs on quill dial, with automatic return of quil after stop of infeed * Electro-mechanical clamping of the radial arm and the drillhead via switch * Coolant equipment built in the lower table plate, VOGEL Central lubrication * Built-on cubic table, approx. 600 x 1,200 x 300 mm. This machine is ideal for steel work, tool work, and mechanical engineering. Condition : average to good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: good (used), Year of construction: 1982, Drilling diameter: 50 mm, gray cast iron: 60 mm Maximum spindle-guide distance: 1600 mm Vertical arm travel: 875 mm Carriage travel on the arm: 1280 mm Arm rotation: 180° Ijdpfx Aewlh E Seh Uobf Morse 5 spindle taper Spindle stroke: 310 mm Number of spindle speeds: 16 Maximum spindle torque: 31,000 Nm Mounting surface: 1820 x 986 mm Dimensions: 3100 x 1120 x 3396 mm Weight: 4300 kg

Condition: repair required (used), STANKO 2 A 554 The machine is in perfect working condition except for the clamping of the boom lifting device and is currently still in operation. The clamping would have to be reassembled and readjusted, all parts are present. For safety reasons, the boom is secured with a tensioning strap, the clamp for the lift is in clamped condition. Technical data: - Drilling capacity 60 mm Iodpfxetpu Tqe Ah Uebf - Projection 1600 mm - Drill spindle holder MK 5 - Drill spindle stroke 390 mm - Spindle speed, 20 steps 20 - 2000 rpm - Clockwise and counter-clockwise rotation - Feed rate, 12 steps 0.056 - 2.5 mm/rev - Drive 400 V / 12.8 kW - Clamping of the arm and drilling unit electromechanical - Distance machined machine bed - drilling quill - min. approx. 900 mm - max. approx. 1600 mm - usable machine bed with 4 T-slots 950 x 1700 mm - Coolant device - Cube table - Space requirement approx. W 2600 x H 3000 x D 1000 mm - Weight approx. 4500 kg

Condition: excellent (used), GSP M 743 mortising machine Stroke (mm): X450 Y500 Ibjdpfx Ajulfuzjh Uef Slide travel (mm): 300 Max. table tool distance (mm): 450 Gooseneck (mm) : 590 Slot width 25 30 mn Table diameter (mm): 700 Feed speed (mm/mm): 0.1-2.5mm/Cp Main motor power (HP): 6 Machine equipped with : Automatic feeds/Slide tilting Dimensions WxDxH (mm) : 2300x1700x2600 Machine weight (T) : 3.5 Overall dimensions 2500x 2200 height 2400

Condition: ready for operation (used), Year of construction: 1978, Drilling capacity Ø 50 mm, table size 1000x1640 mm, spindle nose MT-5, quill stroke 400 mm, quill Ø 80 mm, outreach 1755 mm, nose to table 450-1600 mm, 21 speed 20-2000 rpm., motor 4 KW, 12 feeds, dimensions 2700x1100x3430 mm, weight ca. 4800 kg Ibjdpfxjd Sw N Ae Ah Uof

Condition: excellent (used), The radial drilling machine was completely overhauled at our facility in 2021 and is now, after the buy back from our customer, available for sale again. Following the general overhaul and modernization in 2021, the machine met all geometric standards and had the full technical capabilities of a comparable brand-new machine. Technical data: * Max. drilling diameter in steel / cast iron: 75 / 85 mm * Max. thread cutting in steel / cast iron: M56 / M68 * Max. distance between spindle and table: 2000 mm Isdowuf Ehspfx Ah Uobf * Min. distance between spindle and table: 390 mm * Spindle taper: MK 5 * Spindle speed range: 12.5–1600 rpm * Spindle stroke: 350 mm * Power supply: 400 V three-phase current * Spindle with mechanical feed * Electrically lowered and raised arm * Electric arm height lock * Motor power: 5.5 kW * Approximate machine weight: 7000 kg * Dimensions (L / W / H): 3275 mm / 1170 mm / 3280 mm

Condition: good (used), Used radial drill SASS Mod.TRM 2200 Excellent condition, fully functional. Cube supplied Maximum diameter drilling from solid cast iron 20-22 100 mm Maximum diameter drilling from solid steel R=60 80 mm Ibsdpfx Ahoikqz Sj Ujf Sliding quill spindle diameter 102 mm Spindle morse taper 6 Spindle vertical travel 500 mm Rotational speed 32 Spindle speed values with 50 Hz motor - rpm/1' 18 ÷ 1600 Automatic feeds Maximum reach from column edge to spindle axis 2230 mm Minimum and maximum drilling radius 660 ÷2505 mm Head displacement on arm 1845 mm Vertical arm displacement 1040 mm Column diameter 550 mm Column height with motor 3720 mm Base plate height 260 mm Base plate height 2490 x 1230 mm Spindle motor 11 HP Weight 9000 kg

Condition: new, Year of construction: 2025, A large and stable radial drilling machine with a large range of revolutions which ensures precise and fast machining. Machine features Ibedpfji D Da Aox Ah Uof Large weight and sturdy design ensure stability and vibration-free operation Cube table provides adjustability and easy fixture of workpiece Control panel located at the front of the machine for improved convenience Ground column surface provides easy, precise arm travel Machine equipped with manual head and column arm limiter Large speed range for accurate and quick machining Technical data Maximum drilling diameter 35 mm (cast iron); 30 mm (steel) Distance from spindle to base 360–1300 mm Distance from spindle axis to column surface 260–1300 mm Spindle extension 200 mm Spindle taper MK4 Spindle speed ranges (6): 75, 130, 240, 380, 660, 1200 rpm Spindle feed ranges (3) 0.10; 0.16; 0.25 mm/turn Vertical arm travel speed 1.3 m/min Arm rotation 360° Main motor power 2.2 kW Lifting motor power 0.75 kW Worktable dimensions 510×380×305 mm Machine dimensions 800×1800×2150 mm Weight 1400 kg Default equipment B16 (3-16 mm) Drilling chuck B16/MK4 Drilling chuck mandrel MK4/MK3 reduction Wedge for taper removal The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: ready for operation (used), Radial Drill, Used Equipment Brand: CSEPEL Model: R.F. 2a Description: Column Diameter: 350 mm Vertical Travel of the Arm: 1200 mm Horizontal Travel of the Drill Head: 1000 mm Vertical Travel of the Spindle: 400 mm Ibedpfow Db Nusx Ah Usf Spindle Diameter: 65 mm 12 Spindle Speeds: 47.5 – 2100 RPM 8 Feed Rates: 0.048 – 1.2 m/min Motor Power: 9 HP

Condition: new, Year of construction: 2025, functionality: fully functional, ADRIA Radial Drill Model Z3050X16 Year 2024 Condition New Drilling capacity on steel 50 mm Threading capacity 25 mm Vertical arm stroke 580 mm Cube dimensions 500x500x630 mm Spindle attachment CM No 5 Spindle stroke 315 mm Number of speeds No 16 Iodewq Emkspfx Ah Usbf Number of feeds (16) 0.04/3.2 Distance spindle axis and column 1600/350 mm Distance spindle base 1220/320 mm Spindle speed 25/2000 Rpm Main motor 4 kw Hydraulic locks Complete with Cube Dimensions 2500x1060x2655 mm Weight 3500 kg Complete with Instruction book and CE Cert. READY FOR DELIVERY

Condition: used, RADIAL CSEPEL TYPE: RF50/1600 Isdsriu Eyjpfx Ah Uobf TYPE: RF50/1250 20 AVAILABLE PIECES