Condition: used, Year of construction: 1992, - Combination unit with electronic shoe - Paint sanding - Dust brush - Dust cleaning used Brand Bütfering Type AWS-E-1100 Year of manufacture 1992 Mach. no. 2565571 Working width approx. 1100 mm Passage height approx. 160 mm Number of units 1 piece Belt dimensions 1900 mm x 1120 mm Feed speed continuously adjustable 2.5-12.5 m/min. Dslinhnevxlqyepscg Suction connection D 2 x 200 mm Space required approx. 1700 mm x 2100 mm x 2100 mm Weight approx. 2200 kg Storage location 97447 Gerolzhofen, free loaded, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: ready for operation (used), Year of construction: 1989, grinding belt length: 2,600 mm, grinding belt width: 150 mm, space requirement width: 900 mm, space requirement length: 1,650 mm, Langzauner LZK 3/2 edge sanding machine motor power 2,2kW Belt dimension 2600 x 150 mm Belt speed 20m /sec Djlorgpw Aeinhnpocg Table dimensions 1000 x 350 mm Height adjustment 200 mm Weight 300 kg Space requirement 1650 x 900 mm Sanding unit 45° tiltable Veneer sanding unit Oscillation Feed console year of construction 1989 Condition: fully functional

Condition: excellent (used), Top-bottom sander SAC 4R-300 Working width 300mm Working height 150mm 4 sanding units 2x bottom unit 2×5.5kw 2x top unit 2×5.5kw Top and bottom sweeping brush 2×0.55kw Dcslov Awfwoinhnpog Adjustable feed on the inverter 4-16m/min Electrical adjustment of sanding height Possibility of working in line with other machines CE certificate Year of production 2001

Condition: used, Year of construction: 2004, - Cutting width (mm): 1300 - Workpiece thickness max. (mm): 3 -140 - Brushing device: Brush roller diameter 150 mm - Drive for brush-off device (kW): 1.5 - Transport bed: 3.0 kW FU 4.0 kW Dolinstt Slcohnpscg - Feed speed (m/min.): 5 - 25 - Workpiece conveyor belt suction clamping system (kW): 7.5 - Total weight (kg): approx. 7500 - Total power connection (kW): approx. 73

Condition: like new (used), Working width: 300 mm Working height: 200 mm Mechanical oscillation Rubber roller + shoe Two-stage feed speed Dcslinjv Ai D Eshnpjg Weight: 800 kg Star-delta motor start

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 0422300345, working width: 1,350 mm, grinding height: 160 mm, working height: 900 mm, conveyor belt speed: 333 mm/s, grinding belt length: 2,620 mm, TECHNICAL DETAILS Operating side: left Working width: 1,350 mm Workpiece thickness: 3-160 mm Belt speed: 4-20 m/min Rollers: 2 steel rollers and 1 rubber roller Rollers and motors 1st motor power: 37 kW, steel contact roller Ø 240 mm, sanding belt 1,370 x 2,620 mm 2nd motor power: 30 kW, steel contact roller Ø 240 mm, sanding belt 1,370 x 2,620 mm 3. motor power: 22 kW, rubber contact roller Ø 240 mm, 70 Shore, sanding belt 1,370 x 2,620 mm Transport motor: 7 kW with inverter Brush motor: 0.75 kW Vacuum fan motor: 7.5 kW Extraction Dust extraction requirement: 13,490 m³/h Display and control Display: 10" touchscreen Program memory: 1,024 Resolution: 640 x 480 pixels MACHINE DETAILS Length of the machine: 2,970 mm Dslinhnjukq I Rjpjcg Width of the machine: 2,050 mm Height of the machine: min. 2,255 mm - max. 2,415 mm Working height: 900 mm Amperage: 200 A Voltage: 400 V SCCR: 18 kA, 50 Hz Total connected load: 105 kW Max. Air pressure: 8 bar EQUIPMENT Equipped with 2 steel and 1 rubber roller

Condition: good (used), Functionality: fully functional, overall weight: 95 kg, power: 2.25 kW (3.06 HP), Oscillating sanding belt, height-adjustable work table, adapter for dust extraction (diameter 120mm), aluminum work table, sanding unit infinitely tiltable from 0° to 90°. BG wood dust tested. Technical data: Voltage 400V, 50/60 Hz Belt motor power: 2.25 kW Motor speed: 3400 rpm Belt speed: 20m/sec Work table: 620x220mm Belt dimensions: 2250x150mm Weight: 95kg Dcolsug Uynsinhnpog

Condition: used, Year of construction: 1999, Number of sanding units 5 st. Feed speed 6 m/min. Overall size 2600x1000x1600 mm Dcolinhnovwfctjpeg machine weight ab. 600 kg

Condition: used, Year of construction: 2004, - Cutting width (mm): 1300 - Workpiece thickness max. (mm): 3 -140 Dolstt Sb Teinhnpscg Longitudinal sanding units: - Longitudinal sanding unit 1: Sanding belt speed 24 m/s - Longitudinal sanding unit 2: Sanding belt speed 24 m/s - Longitudinal sanding unit 3: Sanding belt speed 24 m/s - Longitudinal sanding unit 4: Sanding belt speed 10 + 20 m/s - Longitudinal sanding unit 5: Sanding belt speed 10 + 20 m/s - Longitudinal sanding unit 1: Motor power 55 kW - Longitudinal sanding unit 2: Motor power 55 kW - Longitudinal sanding unit 3: Motor power 45 kW - Longitudinal sanding unit 4: Motor power 18 / 21.5 kW - Longitudinal sanding unit 5: Motor power 18 / 21.5 kW - Brushing unit: Brush roller diameter 150 mm - Drive for brushing unit (kW): 1.5 - Transport bed: 11 kW FU 22 kW - Feed speed (m/min.): 5 - 25 - Workpiece suction unit (kW): 15 - Total weight (kg): 12800 - Total power connection (kW): approx. 245

Condition: used, cleaned, function checked, test runPneumatic rotary switch new3/2 way valve newRebuilt band oszilationnew pressure regulator installedmachine adjustedused, good conditionmanufactured by Samcotype Unilev 15 NMasch.-No. AM / 030640motor 3 kWoscillation pneumaticveneer edge sanding unitfront table ca. 1200 x 220 mmrear table ca. 1200 x 220 mmtable tiltabledouble sidedband tension pneumaticmitre cutting guideheight adjustment aggregateexhaust connection D 100 mmrequired space ca. l x w x h mm1300 x 800 x 1800weight ca. 450 kglocated in 97447 Gerolzhofen, free on truck, unpackedsale in current condition as seen Dcslinovwgf Nehnpeg

Year of construction: 1997, Condition: good (used), - Working width (mm): 1300 Delinjidi Ivehnpscg - CSD system - Cross sanding unit - Longitudinal sanding unit - Shoe - Brush unit - Ionization

Condition: new, - New -with swiveling sanding unit andoscillating sanding belt F version forVeneer grindingDescription:- The grinding unit can be swiveled up to 45 ° using a lever- The machine stand made of welded steelguarantees high torsional rigidity andvibration-free work.- Oscillating sanding belt with separateGear motor for better grinding results- Oscillation can optionally be switched on- Sanding sole with graphite coating for a higherService life of the sanding belt- Height-adjustable sanding table for usethe entire width of the sanding belt- Height-adjustable additional table with suctionfor grinding radii- The spring-loaded belt tension is the sameTape length differences independently.- With double suction- Extendable roller table extension- With rubberized sanding roller- Veneer edge grinding device with contact shoewith fine adjustment, relief rollersand fence rulers- With grooved infeed ruler for veneer protrusions- Quick changeover of veneer edgespossible on solid wood sandingTechnical specifications:Dimensions and weightsLength approx. 1900 mmWidth / depth approx. 900 mmHeight approx. 1350 mmWeight approx. 290 kgConnection suctionExtraction nozzle diameter 140/100 mmDrive powerOscillation motor 0.25 kWWork table (s)Working table length 960 mmWorking table width 350 mmWork table height adjustment 230 mmHeight adjustment longitudinal table 230 mmCross table height min. 720 mmElectrical dataConnection voltage 400 VMains frequency 50 HzGrinding unitSanding belt length 3000 mmSanding belt width 200 mmBelt speed (s) 20 m / sSanding surface length 1050 mmSanding surface width 200 mmOscillation stroke 20 mmItem No. 5363001 Dcelinhevwgbwenpsg

Condition: used, - Sanding belt: oscillating - Pivotable - Driven roller: in table - Fields of application: Mouldings, round arches etc. Dcjlijm Sf Dsnhnpeg

Condition: new, - New -With swiveling sanding unitand oscillating sanding beltDescription:- With oscillating sanding belt for goodRemoval rate, an external sanding pattern and alonger service life of the sanding belt- With height-adjustable sanding table- Continuously variable from -45 ° to + 45 ° as standardadjustable miter and workpiece stop- Infinitely incline adjustable sanding unit(0 ° -90 °) for vertical and horizontal grinding- Table height adjustment by means of a handwheel- Robust work table made of gray cast iron with T-slots,stable position of the machine when working- With height-adjustable additional table forContour grinding- Quick and easy sanding belt change overQuick release system- Spring-loaded clamping device for an evenmoderate belt tension- Sliding sole with graphite coating as standard- Extraction nozzle Ø 100 mm- With lockable storage optionin the standard substructureEquipment details:- Thanks to the continuously adjustable angleThe sanding unit is the edge sanding machinefor various grinding processes such as B.vertical and horizontal grinding can be usedTechnical specifications:Dimensions and weightsLength approx. 1300 mmWidth / depth approx. 750 mmHeight approx. 1200 mmWeight approx. 120 kgConnection suctionExtraction nozzle diameter 100 mmWork table (s)Work table height adjustment 80 mmLongitudinal table length 750 mmLong table width 250 mmHeight adjustment lengthways table 80 mmCross table height min. 980 mmElectrical dataConnection voltage 400 VMains frequency 50 HzGrinding unitSanding belt length 2270 mmSanding belt width 150 mmBelt speed (s) 16.3 m / sSanding surface length 820 mmSanding surface width 170 mmScope of delivery:- Miter fence- Workpiece stop 499 x 178 x 69 mmItem No. 5900750 Djlinhevwgbkenpecg

Condition: new, 1. steel roller diameter (mm) 120 2. Rubberized working roller diameter (mm) 160, 455h Sanding belt (mm) 1120 x 2200, 1 piece per sanding unit Main engines (kW) 2 x 11 (15 HP) Motorized table stroke - Work piece height (mm) 3 - 160 Dcoljfhmgcoinhnpsg Automatic star/delta starting of the motor Sanding roller lifting for 1st unit from the front control panel - pneumatic Sanding roller lifting for 2nd unit from the front control panel - pneumatic Pneumatic grinding shoe PL 2 Amperemeter - for measuring the current of the motors of the grinding units Sanding belt oscillation control - with the help of an optoelectronic reader with infrared beam Automatic feed belt centering Table Positioner Electronic measurement of the table position with digital display Frequency converter of the feed belt speed (m/min) 3 - 15 Rubberised pressure rollers Emergency-off pneumatic disc brake of the main engine Mechanical limitation of the maximum chip removal of the workpiece Noise protection Power supply 400 V/50 Hz Machine built to CE power and safety standards Additional equipment on request

Condition: new, -New-The upper part in heavy cast design withbuilt-in three-phase motor 380 V, 2.2kW,2850 rpm,the machine is equipped with built-inSwitch and plug combination,Motor protection switch and main switch according to VDE,Dimensions of the back wall of the sanding belt: 850 x 150 mm,Steel table adjustable in height by means of spring pressure,Tape measure: 150 x 2280 mm,the back wall of the sanding belt is covered with a graphite sliding coating,the machine is supplied with an assortment of sanding belts,The scope of delivery also includes a bracket andMiter machine is connected to acentral extraction system with one air speedDust-tested at least 20 m / s (GS) hnical specifications:Motor power: 2.2 kWSanding belt size: 150 x 2280 mmSanding belt speed: 22 m / le size: 750 x 350 mmRequired space: 1000 x 800 mmWeight: from 180 kgExtraction D .: 100 mmItem No. 1050-500000Incl.:- swiveling 90-180 °Item No. 1050-590010- Belt oscillation item no. 1050-590020- Support table on the pulleyItem No. 1050-590040- pneumatic belt tensionItem No. 1050-590155 Dcolinhevwf Ivsnpog

Condition: used, - For grinding curves and inner radii Delsghrz Ssinhnpecg

Condition: new, - NEW -The model for more comfort. The edge sanding machineRS 2010 with its versatile equipment offers edge grindinga complete processing for the carpentry quick changeover from freehand sanding to veneer sanding,the band oscillation and the stepless swiveling of theGrinding aggregates allow universal support table, which is pneumatically adjustable in height, and thepneumatic belt tensioning ensure easy hnical Equipment:- Pneumatically height-adjustable work table- Infinitely swiveling sanding unit up to 45 °- easy conversion to veneer edge grinding- pneumatic belt tension- Display 0 - 45 ° for the sanding unit- stable support table on the pulley- feed bracket- Angle and miter fence- Veneer grinding device- Table on the deflection roller adjustable by spring pressure- stepless aggregate donation 90-135° via hand wheel- oscillationTechnical specifications:Motor power: 3 kWBelt speed: 22 m / sBand length: 2760 mmBand width: 200 mmTable size: 450 x 920 mmRequired space: 1200 x 2000 mmExtraction: 120 &amp, 80 mmTotal weight: approx. 320 kgStorage location: 97447 Gerolzhofen- free loaded- Dcelovwf Hxeinhnpeg

Condition: used, - engine (hp): 1/1.9 - engine (rpm): 710/1420 Dcslinhnjm R Iljpog - Motor (V): 380 - Motor (A): 3.7/3.8

Condition: used, Year of construction: 1987, Edge and profile sanding machine with new feed beltused, great condition, little used, top equipmentMake ArminiusType ST-4Year of construction 1987Machine no. 1948Belt feed with top pressure rollers and support roller conveyorapplication-controlled sanding pad that can be exchanged for a profile sanding bodyProfile grinding spindle with infinitely variable speed controlGrinding spindle 28 x 90 mm1.5 kW / max. 1,500 plessWorkpiece passage height 0-100 mmMotor 1.5kWMotorized oscillation 0.02 kWVeneer edge grinding device with controlled shoefront table approx. 500 mm x 1350 mmUnit tiltable 0-90°Belt length 1600 mmBand width 150 mmBelt speeds infinitely variablemobilemiter gaugeRound edge grinding deviceInfinitely variable feed system - belt feed with top pressure 5-25 m/e tiltable 0-90°New price approx. €25,000.00Suction connection 100 mmSpace requirement approx. 1350 mm x 930 mm x 1100 mmWeight approx. 280 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seenWithout guarantee and guarantee Djlievwfx Ionhnpocg

Year of construction: 1980, Condition: used, used, good conditionMake HapfoType BSMYear of construction 1980Machine no. 7599Motor approx. 3.0 kWoscillation motorfront table approx. 930 mm x 300 mmAggregate tiltable 90°exhaust fanBelt length 2600 mmBand width 100 / 150 /200 mmbelt speeds 2mobileRound edge grinding device 30 - 60 - 90 - 120 mmwith support table approx. 650 mm x 450 mmtape tiltableExtraction connection D 2 x 140 mmSpace requirement approx. 2000 mm x 800 mm x 1300 mmWeight approx. 400 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Dcelinhnovwfxuopjg

Condition: used, Year of construction: 1988, used, good condition cleaned, tested manufactured by Johannsen type T 45 built in 88 number of aggregates R + L Lon motor 1,5 kW exhaust connection D 140 mm required space ca. l x w x h mm 1000 x 500 x 1000 weight ca. 130 kg total connected power ca. 1,5 kW Dcslinevwf Trjhnpsg located in 97447 Gerolzhofen sale in current condition as on Foto seen - free on truck -

Condition: new, Year of construction: 2023, Stock saleYear of construction 2023Description:- Sanding unit can be swivelled by hand crank- The machine stand made of welded steel guarantees high torsional rigidity and vibration-free working- Oscillating sanding belt with separate gear motor for better sanding results- Oscillation can be switched on as required- Sanding soleplate with graphite coating for a longer service life of the sanding belt- Height-adjustable sanding table to utilize the entire sanding belt width- Additional table with suction openings for sanding radii on the rubberized deflection roller- Sanding sleeve device with attachable work table- The spring-loaded belt tension automatically compensates for belt length differences- With adjustable stops, ideal for veneer sanding- The grooved veneer stop allows the veneer overhangTECHNICAL DATADimensions and weightsLength (product) approx. 1700 mmWidth/depth (product) approx. 1000 mmHeight (product) approx. 1150 mmWeight (net) approx. 300 kgDrive powerPower oscillation motor 0,11 kWSuction connectionSuction nozzle diameter 2 x 100 mmWork table(s)Work table length 950 mmWork table width 450 mmWork table height adjustment 110 mmElectrical dataSupply voltage 400 VMains frequency 50 HzSanding unitSanding belt length 2640 mmSanding belt width 150 mmBelt speed(s) 14 m/sOscillation stroke 15 mmSanding surface length 800 mmSanding surface width 150 mmSwivel sanding unit 0 - 45°SCOPE OF DELIVERY1x sanding belt K1005x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mmtool kitmitre fence Dcolinhevwfxbonpeg

Condition: used, usedmake Löserbelt unit 1motor 1 / 1,4 kWspeed 2 speedssuction connection own suction 0,44 kWspace requirement approx. 1400 mm x 800 mm x 1700 mmstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Delinhjvwfwkjnpocg

Condition: new, - NEW -GENERAL FEATURES:machine frame and worktable* steel structure with electrical cabinet at the front of the machine* sanding belt infeed from the left side of the machine* motorized table height adjustment* main motor integrated in the machine frameelectrical equipment* electromechanical control panel on the front left side of the machine* automatic star-delta start for the main motor* motor protection switch for the motors* motors in insulation class IP 54emergency and protective devices* Safety microswitch for excess thickness* Automatic brake for immediate stopping of the units* Emergency stop safety edge in the workpiece infeed* Mushroom switch in the workpiece infeed and outfeed* Lockable main switch* Automatic emergency shutdown of the machine in the event of:- sanding belt breakage- untensioned sanding belt- protection against lateral movement of the sanding belt- lack of compressed air- overload of the main motorsNote: the standard version with 400 volts 50 Hz requires a three-phase power supply zero conductor ground the 400 volt power supply is without neutral, a single-phase transformer from the price list must also be ordered. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is present or machine version with 220 or 230 volts (50 or 60 Hz) is subject to additional costs (see price list).BASIC MACHINE STANDARD EQUIPMENT- R140/85 rubber-coated calibrating roller diam. 140 mm 85 Sh - 1st pos.- R160/45 rubber-coated sanding roller diam. 160 mm 45 Sh - 2nd pos.- Hard sanding pad with manual adjustment of the working height- Main motor 11 kW (15 HP)- Electronic ammeter for the main motor to display the power consumption- Electronic display of the working height- Electronically controlled sanding belt oscillation- Rubber pressure rollers- Kickback protection in the infeed in front of the first unit- Rubber feed carpet 60 Sh- Roller table with two rollers in the infeed and outfeed of the work table- Carpet feed with two speeds 4,5 / 9 m/min withgeared motor- automatic carpet centeringworking width mm 1.100Min./Max. working height mm 4 - 170Sanding belt width mm 1,115Sanding belt length mm 2,150Main motor power kW (HP) 11 (15)Gear motor kW (HP) 0.45/0.8 (0.6/1.1)Feed speed m/min 4.5/9Consisting of:10.90.87 European Safety Regulations(Mark C.E.)93.07.31 Volt 400 EU93.12.01 Frequency 50 Hz44.44.19 Version "B" for RCS33.31.50 Roller table in infeed and outfeed for long workpieces62.44.50 10" control panel with "eye-S" software integration31.21.60 "RA" inclined ribbed steel contact roller - 1st unit97.50.71 Main motor 15 kW (PS 20) Dolinhevwfrnenpecg