Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Ijdpfx Ahovxuxmo Uetr Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: good (used), Code: 0281 Brand: AGLA GALLI Model: 2 R 130 Automatic 2 roll polishing machine for polyester and varnish - It is suitable for buffing of high gloss polyester or polyurethane paints, metals, marble and similar materials N° 2 inclined rollers - Thanks to this inclination, the rotating brushes, by oscillating, ensure a perfect polishing of the surfaces to be treated Itedpfjx Db Nfsx Ah Usr REVERSE" system , which restrains softens the reverses even with heavy materials like marble, wooden panels, etc. Length of 2 rollers mm 1300 Roller diameter mm 300 Useful working length mm 4300 Useful working width mm 1300 Max panel height mm 120 Motor hp 15 x 2 Working table height from mm 950 to mm 1180 Suction mouth diameter mm 200 Overall dimensions mm 5000 x 2350 x 1750 h Weight kg 2500

Condition: used, Year of construction: 1997, Number of belts: 2-belt Max. working width: 1100 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: Calibration roller Diameter of 1st roller: 150 mm Design of 1st roller: grooved rubber roller 90 degrees Shore Sanding belt length of 1st unit: 1900 mm Sanding belt width of 1st unit: 1120 mm Sanding belt speed of 1st unit: 18 m/sec Drive of unit 1: 11 kW 2nd belt: Sanding unit shoe Sanding shoe of 2nd unit: electronic individual links 45 mm segment width Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1120 mm Sanding belt speed 2nd unit: 18 m/sec Drive of 2nd units: shared motor with 1st unit with rigid sanding pad for solid wood and frame sanding. Lacquer sanding possible: No. Fixed feed speed: 5/10 m/min. Control: Hand control panel. Electric/pneumatic belt oscillation: Yes. Table lift: Electric. Table display: Digital. Operating pressure: 6 bar. Machine number: E / 79191. Dimensions: 1930 x 1700 x 1980 mm. Motor power: 12 kW. Extraction diameter: 2 x 150. Storage location: Nattheim. Itodpfxjxq Apts Ah Ujr

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 220, Dear customers, We are currently offering a very good used vertical band sander for model and mould making from the brand F. Zimmermann. Below are the technical details: Sanding belt width: 250 mm Sanding height: 400 mm Belt length: 2,400 mm Sanding speed: 18 m/s Work table: 750 x 350 mm Table tilt: 30/45° Power: 4.0 kW Speed: 1,400 rpm Extraction port diameter: 120 mm Dimensions: 990 x 850 x 1,740 mm Weight: 470 kg Iedpjxy Nrgjfx Ah Ustr Equipment: - Foot emergency stop Price plus VAT; this will be itemised separately on the invoice.

Condition: excellent (used), functionality: fully functional, De Stefani MVT Edge Sander Itodpfx Aox H Si Deh Uor 1 sanding unit Maximum workpiece height: 80 mm Sanding unit motor: 1.5 kW Sanding belt speed adjustable via inverter Self-tensioning sanding unit Manual adjustment of the sanding unit Manual adjustment of the unit angle Sanding unit with oscillation Feed speed adjustable via variator Feed motor power: 0.74 kW

Condition: used, Year of construction: 2012, functionality: fully functional, Grinding unit with contact roller DIAGONAL unit with segmented sanding pads (35 mm segment width) 2 motors with 15 & 11 kW, 400V Pass-through height: 200 mm Constant working height (machine upper section adjustment) Itedpex Eh Svsfx Ah Usr Abrasive belt dimensions: 1350 x 2000 mm Automatic thickness adjustment ENORMATIC PLC control with touch screen and operating hours counter Machine version for INTERMEDIATE LACQUER SANDING Pneumatic lifting/lowering of the contact roller Vacuum device complete with integrated fan Infinitely variable feed rate via touch screen Infinitely variable sanding belt speed and belt air blow-off on 2nd unit Drive roller for sanding pads rubber-coated Machine dimensions approx. 1,800 x 1,800 x 2,100 mm (LxWxH) Weight approx. 2,800 kg

Condition: excellent (used), CATALOG NO. 7728 TECHNICAL DATA - Workpiece length: 2800mm - Workpiece width: 1250mm - Main motor: 5.5kW - Sanding belt width: 150mm - Belt air cleaning - Pneumatic hold-down - Right/left rotation - Electric table height adjustment up/down - Extraction port diameter: 180mm - Overall dimensions (L/W/H): 3950x1500x1450mm - Weight: approx. 700kg ADVANTAGES – Unpainted Itodpexdan Hefx Ah Uer – Electric table adjustment – Belt air cleaning – Pneumatic hold-down – Used sander, in very good condition Net price: 8,900 PLN Net price: 2,120 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: good (used), Code: 0667 Brand: SCM Model: SANDYA UNO/RCS Automatic wide belt sander with 2 belts (Roller + Pad) for furniture, furnishings, wooden doors and windows, doors and various panels Composition: 1° Group steel calibrating roller 2° Group roller + finishing pad Isdpfox A A Dusx Ah Ujtr Technical data: Working width mm 920 Working height mm 3 - 160 Sanding belt dimensions mm 930 x 1525 N° 2 belt feed speeds mt/min 4,5/9 Main motor power Hp 10 Infeed and outfeed roller conveyors Electric table lifting Working pressure atm 6 N° 2 suction mouths diameter 160 mm Overall dimensions mm 1500 x 1600 x 1700 h Weight kg 1070

Condition: used, Year of construction: 1992, functionality: unexamined, Table height adjustment via handwheel Ijdjx At Nnjpfx Ah Ujtr Round grinding table Travel device

Condition: excellent (used), Year of construction: 2008, operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: 5202023, VIET 3 belt sander running very well. new bearing fitted in all motors and rollers 12 months ago so machine has full recon and can be seen running very smooth with no rattles or vibration when sanding 1.5mm from oak with 40 grit belt and can give excellent finish with 180 grit with 3rd belt. also have over 200 sanding belts mixture of 40 grit 80, 120, 150, 180 Grit with value of 7000 euro will give with sander for 3000 euro Itsdpjxtf Htefx Ah Usr

Condition: used, Year of construction: 1986, Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Shoe unit 1st roller diameter: 100 1st unit design: steel roller/shoe 2nd unit: roller/shoe 2nd roller diameter: 100 2nd unit design: steel roller 3rd unit: roller/shoe 3rd roller diameter: 100 mm 3rd roller design: grooved steel roller 3rd unit sanding shoe: electronic individual elements Cleaning brushes: Yes Paint sanding possible: Yes Belt blow-off: Yes Vacuum carpet: Yes Itedpfx Aevvki Nsh Uor Storage location: Nattheim

Condition: used, On offer: A wide belt sander from Kündig Brand: Kündig AG Ijdpfx Asx Dxzreh Ustr Model: Kombi 1100 Machine No.: 13558 Machine type: Wide belt combination sander Working width: 1100 mm Unit: Combination sanding unit (calibration and fine sanding possible) Feed: Conveyor belt, adjustable speed Electrics: 400 V / 50 Hz

Condition: good (used), Year of construction: 1996, functionality: fully functional, Tecnolegno Universal 640 25kW edge sanding and shaping machine Ijdpfx Ajw Dpwtoh Ustr Machine in excellent condition Can be inspected in department 14 Dismantling, loading and transport at buyer's expense

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Andi Stratos CNC machine Working area 2520 x 1285 ISO30 spindle Iedpfxsxc T Ahe Ah Uetr Tool changer 250m3 Becker vacuum pump Fencing left and right Laser safety at the front Fanuc control Machine fully operational Available November 2025

Condition: used, Year of construction: 2001, machine/vehicle number: 001048, - Manufacturer: Unisanding - Type: 2.2.0. 0-30 - Working width: 1300mm - Year of manufacture 2000 - 2 rollers flexibly adjustable from 0-30 ° working from above - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass pane on the operating side - External control panel with LCD control - Grinding motors: 2 x 2.2 kW with thermal contact - Feed motor: 1 x 1.5 kW with thermal contact - Vacuum motor: 1 x 5.5 kW - Height axis rollers: 1 x 0.18 kW - Feed 2-10 m/min frequency controlled - Brush speed: 50 - 350 rpm, frequency controlled - Voltage: 3 x 400V, 50Hz - Fuse: 32A - Consumption: 14 kVA - Exhaust air volume (vacuum) 3,000 m³/h - Dust extraction volume: 2,000m³/h – 5,000m³/h depending on the customer - Length: 2,170 mm - Width: 2,040mm Ijdpfsxtakmsx Ah Ujtr - Height: 2,030 mm - Color: RAL 7035 light gray - Operating side: left to right - Ex version: No - Location: at the Blomberg warehouse

Condition: excellent (used), CATALOG NUMBER 7324 Itjdsvt Alwepfx Ah Ujr Technical specifications: - Max workpiece width: 200 mm - Max workpiece height: 190 mm 2 sanding units: - Top: metal roller + pad + metal roller - Bottom: metal roller + pad + metal roller Top side: - 2 rubber, traction pressure rollers - sanding unit - slip roller - 2 rubber, traction pressure rollers Bottom side: - sanding unit - side guide bar - electrically adjustable sanding height 0.37 kW - 6 feed speeds + right/left: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor: 0.6 kW - main motors: 2 x 4 kW - extraction port diameter: 80 mm, 90 mm - overall dimensions (L/W/H): 1830 x 860 x 1760 mm - weight: 630 kg – not painted – used sanding machine, in very good condition Net price: 12,500 PLN Net price: 2,970 EUR (exchange rate 4.2 EUR) (Prices may change in case of significant fluctuations)

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Iodpsvvkipefx Ah Ustr

Condition: excellent (used), Catalogue number 7431 TECHNICAL DATA Ijdpfx Asua Dvrsh Uotr - Max workpiece width: 950mm - Max workpiece height: 150mm Top: - Metal pressure roller - Unit (profiled rubber roller for calibration + pad shoe + metal roller) - Smooth, metal sliding roller Bottom: - Feed belt - Pneumatic oscillation of belts with photocells - Electric table lifting - 2 feed speeds - Main motor: 7.5 kW - Feed motor: 0.6 kW - Table lifting motor: 0.18 kW - Working pressure: 8 bar - Extraction connection diameter: 150mm - Dimensions (L/W/H): 1600x1250x2000mm - Weight: 1109 kg ADVANTAGES – German manufacturing – Additional pad shoe included – Used sander, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (at exchange rate 4.2 PLN/EUR) (Prices may change depending on exchange rate fluctuations)

Condition: used, Year of construction: 1997, Number of belts: 1 belt, max. clearance height: 150 mm, max. working width: 1100 mm. 1st unit: Combination unit. 1st roller diameter: Steel roller. 1st unit design: Roller/shoe unit. 1st sanding shoe design: Electronic individual links. Segment width: 50 mm. 1st sanding belt length: 1900 mm. 1st sanding belt width: 1120 mm. Motor: 1 kW. Feed speed: 4 and 8 m/min. 2nd unit: Dust brush. Approx. weight: 2000 kg. Dimensions: 1800 x 1450 x 2120 mm. Ijdpfsvvkkajx Ah Uotr Storage location: Nattheim

Condition: excellent (used), CATALOG NUMBER 6582 TECHNICAL DATA - Maximum workpiece width: 920mm - Maximum workpiece height: 150mm 2 units: 1) Grooved rubber calibration roller 11kW 2) Grooved rubber calibration roller + belt air blowing 7.5kW From above: - 2 rubber feeder rollers Iedpfxoh Huhto Ah Uotr - Unit - 2 rubber feeder rollers - Unit - 2 rubber feeder rollers From below: - 3 rubber feeder rollers - Conveyor belt - Pneumatic belt oscillation - Electric table elevation - Stepless feed speed adjustment - Working pressure: 8-10 bar - Pneumatic brake - Extraction nozzle diameter: 2 x 160mm - Overall dimensions (L/W/H): 1600 x 1460 x 2000 mm - Weight: approx. 1305kg – Made in Germany – 2 units – Used sander, very good condition Net price: 27,900 PLN Net price: 6,640 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Itsdpfxewhqpre Ah Uor

Condition: excellent (used), CATALOG NUMBER: 6145 TECHNICAL DATA - Maximum workpiece width: 1100 mm - Maximum workpiece height: 140 mm 3 units: 1) Calibrating grooved rubber roller – 15 kW 2) Calibrating grooved rubber roller – 11 kW 3) Calibrating grooved rubber roller – 11 kW From above: - Sliding metal roller Iodjlrvi Ejpfx Ah Ujtr - Sliding rubber roller - Unit - 2 sliding rubber rollers - Unit - 2 sliding rubber rollers - Unit - Sliding rubber roller From below: - Infeed table: 3600 x 1000 mm - Feed speed regulated via inverter 0.25 kW - Traction belt - 3 ejection sliding rubber rollers - Pneumatic belt oscillation with photocell control - Belt blowing - Electric table elevation adjustment – lifting motor 0.75 kW - Smooth feed speed control – feed motor 2.2 kW - With vacuum pump – pump motor 4 kW - Extraction port diameter: 110 mm, 80 mm - Operating pressure: 6-8 bar - Extraction connector diameters: 3×150 mm, 3×200 mm - Overall machine dimensions (LxWxH): 3400 x 2300 x 2800 mm - Feeder dimensions (LxWxH): 3000 x 1300 x 900 mm - Pump dimensions (LxWxH): 600 x 950 x 940 mm - Weight: approx. 5000 kg Net price: 39,900 PLN Net price: 9,500 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary with greater fluctuations)

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Iodowhqplopfx Ah Uetr

Condition: excellent (used), CATALOG NUMBER 5799 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 140 mm - Minimum workpiece length: 300 mm - 2 sanding units: - Top and bottom + platen * Top: - 2 pressure rollers, slip type, metal - Pressure mechanism - Sanding unit: 2 metal rollers + platen - Slip-type pressure roller - Feed belt Itsdefndhzspfx Ah Usr * Bottom: - Feed belt - 2 metal rollers, slip type, smooth - Pressure mechanism - Sanding unit: 2 metal rollers + platen - 3rd metal roller, slip type, smooth - Electrically adjustable sanding height - Oscillation of sanding belts - Pneumatic belt cleaning - Infinitely variable feed speed adjustment via inverter: 3–15 m/min - Feed motors: 2 × 0.37 kW - Main motors: - Upper: 5.5 kW - Lower: approx. 5.5 kW - Air requirement: 6–8 bar - Extraction nozzle diameter: 4 × 100 mm - Overall dimensions (L/W/H): 2340 × 1420 × 1920 mm - Weight: 1480 kg – Suitable for short workpieces (belts overlap) – German-manufactured – Very good condition – Not repainted – Used sander Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7773 TECHNICAL DATA - Max width of workpiece: 900mm - Max height of workpiece: 160mm – Top: - Metal pressure roller, slip type I unit – Calibrating rubber grooved roller II unit – 2x Metal calibrating roller + shoe – Bottom: - Feed belt - Pneumatic oscillating belt - Electric table lifting - Main motor 15kW/11kW - Feed motor 1.5kW Itjdexnynuepfx Ah Usr - Operating pressure 6-8 bar - Dust extraction port diameter 2x200mm - Dimensions (L/W/H): 1850x1950x2040mm - Weight approx. 3000kg ADVANTAGES – Italian manufacture – Calibrating sander + pad – Used sander, very good condition Net price: 15,900 PLN Net price: 3,780 EUR (at 4.2 EUR exchange rate) (Prices may change with significant fluctuations)