Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, 1 complete automatic trimming system Paul 1 used Paul AB920 automatic feeding system consisting of: Transfer table with 1.1 m stroke; 6 m roller table; 9-strand conveyor chain drive Measuring device with 16 measuring points via measuring skids • NCD control and control cabinet • Control of the automatic feeding system and the BK/1000 with a saw blade adjustment Selectable: sharp edge / low wane / high wane - alignment centered or along the rear wane • Trimming grid: 48, 60, 80, 100, 120, 140 mm; • 150-400 mm in 1 cm increments • Single-track trimming with manual input of the trimming width 1 used Double Edger BK/1000L Max. cutting height: 125 mm • Feed with dual gear motor • Divided top roller Dksb Hhzoulikmeu Nsl • Hydraulic sawblade adjustment • Motor: 22 kW, 380 V, 50 Hz, 2900 rpm • Motor clamping rails • Fixed riving knife • Splinter separator 865 mm / 6.30 m long with fixed cutting blade and rising tooth chain for max. log length: 5.50 m • Total connected load of the system: 35 kW Saw shaft with new bearings

Condition: used, Engine power: 9.5 PS/HP (7.0 kW), year of manufacture: 2018, cutting height (mm): 136 mm, circular saw pivoting: 0 46 degrees, circular saw blade Ø max.: 400 mm, scoring saw Ø: 160 mm, sliding carriage 3200 mm, motorized parallel stop, control panel at eye level, digital display on ruler, Compex length compensation Dob Hsvwl Amohzu Nskl

Condition: excellent (used), Altendorf F45 sliding table saw with carriage 0.75KW scoring unit, electrically adjustable 300cm carriage length 0-45 inclination, electrically adjustable with readout up-down saw, electrically adjustable with readout right-hand side manually adjustable up to 1300mm with electronic readout 4KW main engine 3 cutting speeds max. blade 350mm Branded machine, technically in very good condition Djb Hhzjvvbfhju Njkl

Condition: good (used), Year of construction: 1984, STANDARD HJO Maximum width : 400 mm Debjl U Algj Hhzu Njkl Maximum cutting hight : 105 mm Spindle diameter : 80 mm Infeed conveyer belt in very good condition Laser fence Engine size : 75 Kw / 100 Hp. Central lubrication

Condition: used, Year of construction: 2001, No. 04450 Bandsaw MAKA HB 500 Used, year of construction 2001 Roller diameter 500 mm Table dimensions 680 x 515 mm LW Cutting capacity 300 x 480 mm HW Roll width 35 mm Blade length 3950 mm Motor power 1.5 kW Heavy steel box-form construction, balanced cast wheels APA roller precision guides Work table can be tilted up to 20° Machine mobile Transport dimensions approx. 1200 x 800 x 2000 mm LWH Weight approx. 300 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location Dksb Hhzevn Tl Deu Nel

Condition: excellent (used), Year of construction: 2011, Cutting length 2,000 mm Cutting width 1,050 mm with manual adjustment and manual fine adjustment Manual height adjustment of the saw blade Angle stop, cutting lengths up to 3200 mm Drive power 5.5 kW with 3 speeds 3/4/5000 rpm. Cutting height max. approx. 140 mm Saw blade diameter max. 400 mm Dob Hhjp Duwcjzu Nskl CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 1982, The machine is in normal condition. The table is not worn. There is no cross ruler. Dkjb Hhzuowfzt Aj Nol

Condition: used, Striebig panel saw type AUTOMAT 6220 AV/XY1/G for cutting panel material made of wood or plastic. Technical specifications: on demand cutting height: approx. 2,100 mm Dkeb Hhoviw Avozu Njl cutting length: approx. 5,300 mm

Condition: good (used), Year of construction: 2008, Raimann FlexiRip 4200 rip saw - German production, user manual - year of production 2008 - automatic material collection TECHNICAL PARAMETERS: cutting length max. 4200 mm Dob Hhohzg Agezu Nekl cutting width max. 600 mm cutting height max. 130 mm feed continuously adjustable up to 80 m / min main engine power 11 kW disc diameter max. / min. 600 mm / 400 mm 100 dimensions can be programmed line laser two-stage blade feed touch panel control stub diameter 2 x 160 mm dimensions of the machine (length / width / height) 620/160/220 cm weight 2250 kg

Condition: excellent (used), Altendorf F45 format saw 320cm carriage motorically adjusted blade tilt and top/bottom motorically adjusted right-hand side blade up to 1340mm 0.75KW scoring saw, 2-axis electrically adjustable 5.5KW engine max blade 450mm Dob Hswar S Sehzu Njkl switches in carriage used machine, very good condition, holds angles and fully fulfills its functions

Condition: excellent (used), Year of construction: 2000, Saw blade tilting up to 45.5 degrees Cutting height 145 mm max. saw blade diameter 450 mm Cutting width 1250 mm Saw blade speeds 2800/ 4000/ 5500 rpm Motor power 5.5 kW Suction DM - DM 120 mm max. cutting length 3300 mm Dimensions L x W x H = 3300 x 3800 x 1400 mm Weight approx. 1365 kg Generally: parallel fence width adjustment with hand-wheel on the front of the machine Digital display for cutting width Saw blade height and tilting adjustment via foot pedal Scoring unit adjustable by electric motor Length stop on the cross table with digital display retractable parallel stop CE Dsb Hhommb Acjzu Nekl incl. manual incl. tools Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 2010, Condition: good (used), RAIMANN Econorip 310 multi-saw - German production Dsb Heh Tm Alehzu Nokl - CE marking - Quickfix disc sliding system - year of production 2010 TECHNICAL PARAMETERS: - cutting height 110 mm - cutting width 340 mm - engine power 22 kW - adjustable feed on the inverter - electric shaft height adjustment - electric adjustment of the pressure height - spindle in the Quickfix system (the possibility of changing the dimensions without the need for tools) - track diameter max 350 mm - spindle diameter 65 mm - sleeve diameter 80 mm - four upper pressure rollers - four rows of anti-jet pawls - boot for short elements - max width of the element 700mm - minimum element length 300 mm - central lubrication - diameter of the stub pipe 250 mm - ruler Machine dimensions: 190x185x165 cm weight 1800 kg

Condition: new, Max. cutting height at 90° (mm) 140 with 400 blade Max. cutting height at 45° (mm) 97 with blade 400 Saw blade tilt (degrees) 45 Manual lifting and tilting of the saw blade unit Saw blade speed (rpm) 3700 Scoring speed (rpm) 8500 Main motor power (kW) 50 Hz 9.0 with auto. Star/delta switch Scoring unit power (kW) 50 Hz 1.3 Format cuts (mm) 3200x3200 Cutting width for parallel cuts (mm) 1270 Suction nozzle diameter (mm) 120, 80, 60 10-year warranty on the guide system of the saw carriage Trimming carriage with anodized aluminium profile with guide made of hardened, ground and flanged steel guides Height adjustment and tilting of the saw unit via handwheels on the front of the machine and display of the tilting via mechanical digital displays Trimming frame for quick positioning of the fence for mitre cuts - Telescopic fence with 2 fence flaps and scale in user direction - Telescopic support - Idler roller for panel loading and unloading 2 reversible stops on the longitudinal fence Table extensions in the outfeed Saw fence for parallel cutting complete with: - Cast iron support Djb Hhzusit I Sbj Nokl - micrometric adjustment and eccentric clamping device - Round guide made of ground steel, 45 mm diameter scoring unit with independent motorization adjustable from the outside and stops for easy saw blade positioning Emergency stop switch on the front Emergency stop switch on the side in the area of the rip fence (CE version) Thermal circuit breaker Saw blade pendulum guard with integrated extraction, extraction nozzle with DM 80 mm Automatic motor brake on the main saw blade Lockable main switch 110 V auxiliary circuit C.E. Declaration of Conformity incl. digital dimension display for the rip fence

Condition: excellent (used), RAIMANN KD31 double-shaft multi-saw - after the technical review - German production - year of production 1988 TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication Dsb Hhjg Db U Aozu Nekl caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg

Condition: new, Saw unit swivels 46 ° on both sides. Programmable, electric saw blade adjustment Control unit with electronic display for saw blade tilt and lift Torsional rigidity and vibration-free working Easier plate feeding due to large trimming frame with roller Telescopic ruler with 2 professional folding stops Excellent cutting precision scoring unit equipped with its own motor - easily adjustable from the outside saw blade diameter of 400 mm scoring saw blade with a diameter of 160 mm 2-position saw blade pendulum protection manell adjustable 3-axis controlled Motorized rip fence with electronic positioning includes: Position display via an encoder Adjustment via ball screw Stepless adjustment via switch or automatic positioning system Cutting width 1270 mm Programmed movement of motorized adjustment and tilting for saw unit UP version with swivelling control panel for maximum flexibility Dkjb Hhjd Akygozu Nel X version with Compex miter fence for quick and accurate execution of miter cuts with automatic compensation of the stop position. (Length compensation) incl. options: - cutting lenght 3200 mm - on / off buttons for main motor and scoring unit integrated in saw carriage - CompeX frame - Version "READY 3 UP" - 2 saw speeds (3500/5000 U/min) Max. cutting width with rip fence 1270 mm Format cuts 3200 mm main motor 7,0 kW, 400 V, 50 Hz Saw blade angle -46 - 46 ° Max. cutting height 90° 136 mm Max. cutting height 45° 97 mm Max. cutting height -45° 60 mm saw blade diameter 400 mm Diameter scoring saw blade 160 mm (Main) saw blade speed 4000 min¯¹ Dust extraction ports 120 & 80 mm

Condition: ready for operation (used), Year of construction: 2021, Functionality: fully functional, WINTER MULTIMAX 170 - 500 XL Multiblade - year of production 2021 - original DTR documentation - very good condition TECHNICAL PARAMETERS: Dob Hhotlp Atezu Nskl max. cutting height 170 mm min. length of a single element fed for cutting 740 mm max. cutting width 500 mm feeding and receiving table 1200x600 mm max. blade diameter 505 mm sleeve diameter 80 mm saw spindle diameter 60 mm power of vertical support drive motor of pressure rollers 0,75 kW power of main motor 75 kW feed motor power 5,5 kW smooth regulation of feed speed on inverter 2,5-24 m/min width of the element max 850 mm height of the table from the base 820 mm transport dimensions (length / width / height) 3500 / 2020 / 2000 mm weight 4250 kg

Condition: excellent (used), Veneer saw Front support table Pneumatic pressure beam control Rear table consoles with angle stop Suction channel Cutting length 4200 mm Cutting height approx. 50 mm Motor power 3.0 kW 400 V, 50 Hz Saw blade diameter approx. 180 mm Dsbjvbzpkj Hhzu Nokl Dimensions approx. L x W x H = 5800 x 1350 x 1200 mm Advise used machines: - Technical data without obligation, mistake and intermediate sale reserve. - Price is considered ex-location price - All articles or machines are bought as seen without any entitlement on warranty. - It is left to the choice of the buyer to view the machines before at its location. - Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!) Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Raimann KS 310 BV edger multisaw - year of manufacture 1995 - German production - DTR - two movable discs TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - engine power 30 kW - disc diameters 250/360 mm - Possibility to put on a shoe - electric height adjustment - feed continuously adjustable 11-38 m / min - power of the feed motor 1.5 kW - two movable discs - three lasers - max element width 1000 mm - minimum element length 600 mm with a shoe 400 mm - four upper pressure rollers - spindle diameter 65 mm - sleeve diameter 80 mm - spigot diameter 250 mm Dimensions Dksb Hheir Eubjzu Nel 230x220x230 weight 2500 kg

Condition: excellent (used), Year of construction: 2017, Equipment: hydraulic saw blade movement safety 2 hand operation machine according to CE norm brake motor safety fence on worktable working table 1000 mm on right side from saw blade working table 1000 mm on left side of saw blade incl. 1 pcs saw blade DM 600 mm incl. side stopper on fence right side of the saw blade options: incl. additional work table 1000 mm right side of saw blade incl. additional work table 1000 mm left side of saw blade technical data: motor 9,0 kW saw blade DM 600 mm speed saw spindle 3000 RPM cutting capacity W 610 mm x H 30 mm W 380 mm x H 160 mm working hight over ground floor 850 mm working pressure 8 bar suction hoods 3 x 100 mm weight 450 kg compressed air consumption 8 NL/ cycle Dkobjc Slxis Hhzu Njl Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 1999, cutting length 3.200 mm cutting width 3.200 mm cutting hight 65 mm saw blade DM max. 300 mm saw blade motor: 5,5 kW scoring unit DM max. 160 mm motor scoring unit 1,5 kW front support tables 3 Stk. 1 x 2500 x 500 & 2 x 1500 x 500 mm cutting optimisation program no. of grippers 8 pcs Djb Hhzuehvan Io Nskl saw blade hight adjustment on THK guides pressure beam with openings side pusher (alignment) saw blade quick change system suction DM1 x 120 & 1 x 150 mm space requirement L x B 5700 x 6000 mm weight approx. 2500 kg INVERTER NEW Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2019, Motor power 1.5 kW Saw blade speed 2800 rpm Saw blade DM 250 mm Saw blade bore 30 mm Cutting length 400 mm (with 20 mm workpiece thickness) Cutting length at 45 degrees 230 mm Cutting depth 65 mm Swivel locking of the arm +/- 45 degrees Weight 140 kg Motor protection switch Brake motor Emergency stop switch CE Dksbeulzcho Hhzu Njl including dust collection hood for extraction connection DM 120 mm Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Multirip saw Max. Cutting width 310 mm Chain width 340 mm Max. Passage width / input width 650 mm Max. Cutting height with Quickfix clamping flange 110 mm Saw shaft diameter 65 mm Debjtwy Iuo Hhzu Nskl Min. timber length 500 mm Max. Feed speed 35 m/min, variable Motor power 22.0 kW, 400 V, 50 Hz Feed motor 1.3 kW, 400 V, 50 Hz Saw blade diameter min./max. 300/ 350 mm Working height 850 mm Extraction diameter 250 mm Required extraction volume 5300 m3/h Quickfix saw blade attachment Electric height adjustment of the saw shaft Electric height adjustment of the pressure unit Dimensions approx. L x W x H = 1750 x 1750 x 1500 mm Weight 1850 kg Incl options: Oil level monitoring SafetyPlus Quickfix Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Year of construction: 2024, ALL ALTENDORF F25 TYPES READY ON STOCK! Debog Dgr Hj Hhzu Nekl manual hight and Stilding adjustment for saw aggregate 0 – 46° digital display for saw blade height and tilting angle motor 5,5 kW saw blade speed 3600/ 4200 U/min. sliding table length 3200 mm angular fence for cutting length up to 3450 mm prearrangement for retrofitting of scoring unit saw blade DM max. 315 mm max. cutting height 104 mm max. cutting height at 45° = 70 mm working height 880 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 1995, Condition: excellent (used), cutting width 150 mm Min. cutting length 250 mm cutting height 45 - 200 mm cutting kerf 1,3 - 1,4 mm stroke rate 400 #/ min main motor 11 kW feed speed 0,2 - 2,0 m / min feed speed variable central lubrication system incl. saw frame incl. manual Dksbshriz Ds Hhzu Nol dimensions L x W x H = 2500 x 750 x 1650 mm weight 2200 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, ALTENDORF Model F45 Pro Drive Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer warranty. Dkeb Hhsiz Aufozu Nsl Pro Drive control: 3,5" color screen with separate keyboard Automatic dimensional correction on the rip fence and angle fence when tilting the saw unit Simple calibration of the axes Machine diagnostics, operating hours counter, USB interface Recall of the last dimension input (back function) 99 storable cutting programs Grooving: with automatic step-by-step positioning of the rip fence 400V / 50Hz - Europe , Scale: scale in mm Electromotive height and tilt adjustment 0 - 46° for the main saw blade with automatic correction of the cutting height when the saw unit is tilted Machine height 910 mm (basic equipment) The control panel of the F 45 is mounted at eye level. This makes it easy to control all axes, and all settings are in view. The one-handed operation of the swing-away device is easily accessible from the working position in front of the machine. Another advantage: nothing stands in your way at the smooth machine front. INCL. OPTIONS: M62003 Template holder M64080 Extended cutting height with saw blade projection of max. 204 mm. M51101 One-sided tilting saw unit with 7.5 kW (10 HP) motor, M24030 2-axis scoring unit with electric motor-driven height and side adjustment M24037 LED lighting for the danger area of the scoring unit M41010 Table top extension 840 mm M34204 Double roller carriage, carriage length 3200 mm M44404 Angle miter fence, cutting to length up to 3500 m. M44443 CNC parallel fence, cutting width 1300 mm. M44450 Front support roller. M37003 On/off switch on the sliding table. Note used machines: - Errors in technical specifications and subject to prior sale. - Indicated prices are valid as pickup prices ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are bought as seen without any claim to warranty. The buyer is free to inspect the machines at the site. - Special agreements are only possible in written form. (We answer inquiries only under indication of your address + telephone number!)