Used surface grinding horiz. 400-699mm grind. length for sale (232)

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 200 x 450 mm Installation height (Max. distance spindle/table): 450 mm Max. Table load: 150 kg Motor power main spindle: 1,5 kW Connection: 400 V Kfjdpep Dt Ttsfx Ah Uoa Dimensions (LxWxH), approx.: 2080 x 1200 x 1700 mm Weight, approx.: 950 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Note: Picture shows FSM 2550 AH of identical design. Pictures may show the machine with special accessories and with application examples.

Condition: good (used), Norton flat grinding machine Kfedpfxsi Eqzwo Ah Usa Type: MGS 17A X-travel: 540 mm Speed: 2880 RPM Bed: 660 x 150 mm Dimensions: 140x110x160 cm LxWxH

Condition: used, Surface grinding machine BLOHM type HFS 6 make no.: 10493 year of construction 1973 Electro magnetic clamping plate 600 x 300 mm grinding length 600 mm grinding width 400 mm table longitudinal movement max. 650 mm transversal movement 350 mm distance spindle center - table surface max. 600 mm distance spindle center - magnetic plate max. 517 mm Clamping surface table 1020 x 300 mm grinding wheel diameter 300 mm grinding wheel width 50 mm grinding wheel bore 76 mm table longitudinal feed 2-30 m/min infinitely variable table cross feed 2-65 mm stepless electric cross feed 3 m/min vertical feed 0,001 - 0,020 mm per infeed pulse Kedpfod Hbafex Ah Uefa vertical feed 0,250 m/min grinding wheel speed 1400 / 2800 rpm. Motor power hydraulic pump 2,2 kW Motor power grinding spindle 5 / 6 kW Mains connection 380 Volt, 50 Hz. Total power 11 kW - automatic depth adjustment - hydraulic longitudinal table movement - grinding wheel dresser on the headstock - electromagnetic plate height 83 mm - coolant system adjacent, with magnetic filter in filter housing - grinding spindle circulating lubrication - adjacent control cabinet (800 x 500 mm) - swiveling control panel - operating instructions and spare parts manual space requirement L x W x H 3000 x 2200 x 2100 mm weight surface grinding machine 3000 kg weight switch cabinet 200 kg good condition

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 200 V, Mitsui precision grinder, surface grinder manufacturer Mitsui MGG CO.LTD type: MSG-250H2 year of manufacture:1990-6 Table width: 200mm Table length: 480mm Table longitudinal movement, maximum: 520mm Kfjdpfxewviarj Ah Uja Table lateral movement, maximum 250 mm Table movement: 5-20m/min Forward-backward feed: Per revolution: 6 mm Per scale: 0.02 mm Lateral feed: Per revolution: 6 mm Per scale: 0.01mm Grinding spindle speed: 2900 rpm 50 Hz Table total length: 1385x285 mm Magnetic table: 300x130x100 mm Coolant unit, Maximum height from table surface to center of grinding wheel axis: 400 mm Grinding wheel diameter, standard: 205mm Grinding wheel width: 20mm Wheel spindle speed: 2900 rpm 50Hz Grinding wheel bore diameter: 31.75mm Electrical power: 2 HP 1.5 KW 4P 200V 3 phase Weight, approx.: 1105 kg

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 17652031, grinding wheel diameter: 290 mm, table length: 250 mm, table width: 500 mm, overall weight: 3,000 kg, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! Kfedpfx Ahsw Hrpqo Usa Loading can take place on 08/09/2025 or 09/09/2025! TECHNICAL DETAILS Grinding Unit Max. grinding wheel diameter: 290 mm Magnetic chuck area: 500 x 250 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2900 x 1500 x 2400 mm Weight: 3,000 kg EQUIPMENT Spare grinding wheels Balancing device for grinding wheels

Condition: as good as new (ex-display), table length: 500 mm, table width: 300 mm, Flat grinding machine Ziersch Z35 - demonstration machine unused - Grinding area: 500mm x 350mm Ksdpfovvwf Djx Ah Uofa Dresser Permanent magnet Belt filter system with magnetic separator

Condition: new, Precision surface grinding machine MIOTAL FSM 3060 AH Table size: 300 x 600 mm Installation height: 500 mm Max. Table load: 300 kg Motor power: 4.6 kW Connection: 400 V Dimensions: 2300 x 1790 x 2200 mm Weight, approx.: 2000 kg Equipment and scope of delivery: - All cast parts, e.g. machine stand, table etc. made of MEEHANITE® quality casting - Automatic cross and longitudinal feed Kedpfod Sfd Eox Ah Usfa - Permanent lubrication - Automatic cross lifting device - Splash guard on the rear - Grinding wheel - Grinding wheel flange - Honing device - Balancing mandrel - Balancing scale - Dressing diamond - Machine light - Leveling elements - Operating tool - Operating instructions - CE Special equipment of our storage machine: - Electric magnetic clamping plate 300 x 600 mm (fine pole) - 2-axis digital readout, accuracy 0.001 mm, X 450 / Y 500 mm - Automatic vertical infeed AD 5 (NC-controlled) for model AH - mode of operation: Automatic rapid traverse vertical and automatic fine feed vertical - Automatic demagnetization control for magnetic clamping plate - Coolant system with magnetic separator - Manual dressing device - Parts enclosure - Ergonomically arranged control panel - Additional grinding wheel flange - Ball screw for cross feed - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 Alternative equipment features / other machine configurations on request.

Condition: used, Year of construction: 1974, Elb SW9 VAI Surface Grinding Machine – Built in 1974 – Used For sale is a used surface grinding machine from the renowned manufacturer Elb, model SW9 VAI, built in 1974. The machine impresses with its robust construction and is ideal for precise grinding of metal and workpiece surfaces. Technical Specifications: Manufacturer: Elb Model: SW9 VAI Year of Manufacture: 1974 Area of Application: Precision grinding for metalworking Equipment: Wagner Magnet Type SD35/90 Kodpfxov Ti Huj Ah Uefa Special Features: Solid construction – Durable and reliable Precise grinding results – Suitable for industrial applications With Wagner Magnet SD35/90 – Optimal workpiece fixation

Condition: used, Year of construction: 1987, functionality: fully functional, grinding length: 2,000 mm, grinding width: 550 mm, Used surface grinding machine Rosa Ermando Kfodpewxchzefx Ah Uoa

Condition: used, Year of construction: 1990, Technical details: dimensions of the machine ca.: 3,5 x 2,0 x 2,5 m Ksdpewwlu Iofx Ah Ujfa

Condition: good (used), Surface grinding machine GEIBEL & HOTZ FS 40 Primus SA, No. 920287, clamping surface 400 x 200 mm Kfjdpounw Ilsfx Ah Uja

Condition: used, Year of construction: 1980, grinding length 500 mm grinding width 200 mm workpiece height 290 mm Machine from the German Federal Institute of Physics and Metrology - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled Kfsdpfx Aewb Hygjh Uja 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdown Manual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kg Warranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Payment: before pickup Acceptance at our premises Shipping according to your specifications

Condition: refurbished (used), functionality: fully functional, grinding length: 630 mm, grinding width: 230 mm, total height: 1,650 mm, total length: 1,535 mm, total width: 1,770 mm, grinding height: 360 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 20 m/min, grinding wheel diameter: 400 mm, table load: 180 kg, rotational speed (max.): 3,220 rpm, power: 1.5 kW (2.04 HP), disc diameter: 250 mm, Retrofit of Surface Grinding Machine TOS BSKF 20 NC with SCHNEIDER Control System - Machine is fully dismantled and retrofitted Standard Accessories: - 2-axis cycle control, manufactured by Schneider-Electric Functions: Infeed, Spark-Out, Dressing, and Compensation - Grinding wheel 250 x 20 x 76 mm - Grinding wheel flange - Electro-magnetic chuck 600 x 200 mm - Automatic feed on Y and Z axes - Diamond dresser holder (without diamond) - Coolant system with settling tank - Machine lamp - Centralized lubrication - Operating tools - Operating manual - CE declaration - Inspection report Included: Transport and packaging Kfjdpoxf Ez Ujfx Ah Uja On-site relocation with crane/forklift Commissioning Travel and accommodation expenses Accessories: - Partial enclosure - Single-point diamond, 0.75 ct - Balancing arbor with nut and wrench - Grinding wheel balancing stand - Set of levelling elements - Oil filling

Condition: used, grinding length:650 mm grinding width:450 mm workpiece height:425 (ohne Magnetplatte) mm max. workpiece weight:600 kg weight of the machine ca.:3,8 t total power requirement:15 kW machine dimensions approx. WxHxD:3,0 x 2,4 x 2,3 m Used/reconditioned surface grinding machine, make GER, type RSA-650. Automatic infeed in all 3 axes. Kfodpfxofkg H Te Ah Uja Machine geometrically overhauled, repainted (RAL6011, green), all functions tested, accuracy checked. OVERHAUL SCOPE: Machine completely disassembled, all components thoroughly cleaned and tested for complete functionality. Main spindle newly mounted, concentricity 3 µ. All guideways newly scraped in new machine geometry. Wear parts replaced, defective components repaired or replaced. Reassembly, complete functional test and internal acceptance. Machine repainted. Machine in perfect condition, ready for production. MEASURED GEOMETRIC ACCURACIES: Actual geometric accuracy after overhaul, measurement with dial gauge. Geometry of machine axes X and Z X = longitudinal axis 650 mm Z = transverse axis 450 mm Measurement magnet traversed with dial gauge. X axis = Max. Deviation 0,008 mm Z axis = Max. Deviation 0,005 mm INCL. THE FOLLOWING ACCESSORIES: -Electro-magnetic clamping plate, with fine longitudinal pole pitch. dimensions 600 x 400mm -demagnetizing device -Complete coolant device with paper band filter - Digital display of the vertical axis (Y-axis), make Sony -Technical documentation in English language -1 pieces grinding wheel holders -1 piece grinding wheel dresser, mounted above the grinding wheel with manual infeed and automatic (hydraulically operated) transverse movement - 1 set of setting elements You can find more information in the attachment. Payment: 100% before loading the machine Warranty: 6 months on the geometry and the new parts demonstrably installed. No general legal warranty.

Condition: new, Bernardo surface grinding machine BSG 2040 PLC Technical specifications Table clamping surface 200 x 500 mm T-slots number / width 1 / 14 mm Electro-magnetic clamping plate 200 x 460 mm Max. Travel, longitudinal 560 mm Max. travel travel, crosswise 240 mm Distance spindle center / table max. 450 mm Max. workpiece weight workpiece weight* 180 kg Grinding wheel 200 x 20 x 31,75 mm Table speed, hydraulic 7 - 25 m/min Cross adjustment Automatic feed, transverse 0.1 - 8 mm / stroke Rapid feed, cross 990 mm/min Cross feed per handwheel rotation 4 mm/rev. Graduation on handwheel 0.02 mm Vertical infeed Automatic feed, vertical 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm Rapid feed, vertical 480 mm/min Vertical infeed per handwheel revolution 2 mm/rev. Scale division on handwheel 0.005 mm Grinding spindle motor 2.2 kW Spindle speed 2850 rpm Hydraulic pump motor 0,75 kW Vertical feed motor 0,5 kW Length 2160 mm depth 1650 mm height 1840 mm Weight approx. 1640 kg * with magnetic clamping plate Scope of delivery - 2-axis digital display ES-12 H with LCD display - Siemens SMART panel IE V3 with touch operation - Electronic handwheel - grinding wheel - Wheel flange - LED work light - Magnetic clamping plate - Balancing stand - Balancing shaft Protective covers - Parallel puller - Demagnetizing device - Coolant device - Extraction diamond - Machine shoes Kedpfx Aegd Ia Sjh Uofa - Central lubrication - operating tool

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 207306 - 6813, grinding length: 600 mm, grinding width: 300 mm, grinding wheel diameter: 300 mm, spindle speed (max.): 3,000 rpm, grinding spindle motor power: 8 W, No minimum price - guaranteed sale to the highest bidder! Ksdpfx Ahjwm H I Io Uefa TECHNICAL DETAILS Grinding length: 600 mm Grinding width: 300 mm Spindle and Drive Spindle speed: 0 – 3,000 rpm Grinding spindle motor: 7.5 kW Total power requirement: 7.5 kW Grinding Wheel Grinding wheel diameter: 300 mm Grinding wheel dimensions: 76 x 20 mm EQUIPMENT - Magnetic table - Surface grinding machine

Condition: ready for operation (used), Manufacturer: Jung Kfedsnr E Dxepfx Ah Uea Type: HF 50 Magnet table: 450x175mm

Condition: good (used), Manufacturer ZIERSCH & BALTRUSCH Type FS 2560 year of construction 1987 Machine weight approx. 2000 kg x-path 600 mm y-path 250 mm z-path 500 mm Center height 500 mm Grinding wheel diameter 225 mm Kfedpfx Ahstpc Els Usa Grinding wheel width 25 mm

Condition: used, Year of construction: 1996, grinding length 600 mm grinding width 250 mm workpiece height ca. 385 mm table surface area 600 x 200 mm table speed -stepless- 2 - 35 m/min table load capacity max. 250 kg grinding wheel size ø 225 x 25 mm grinding wheel hole diameter 50,8 mm vertical feed autom. 0,001 - 0,099 mm Kfsdpfot Tqrnex Ah Uoa rapid traverse vertical 600 mm/min cross feed of table continual 10 - 1000 mm/min rapid traverse cross 1000 mm/min total power requirement 6 kVA dimensions of machine L x W x H 2,65 x 1,70 x 2,28 m Accessories: DRO on Y-and Z-axis, magnetic plate 600 x 200 mm, grinding wheel with flange, wheel trueing attachment, wet grinding attachment with paper band filter

Condition: used, Year of construction: 1985, grinding length 600 mm grinding width 200 mm Ksdpfxewd Tx Uj Ah Usfa total power requirement 7,5 kW weight of the machine ca. 2,3 t

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, grinding length: 700 mm, grinding width: 450 mm, NEW ARRIVAL Ksdpfjvz A Dcex Ah Ujfa 1 used hydraulic surface grinder GEIBEL & HOTZ FS 6040 Grinding area of the G & H FS 6040 is 600 x 450 mm - year of manufacture 2000 - machine with automatic program sequence - roughing - finishing - sparking out - return to starting position. Machine with 2-axis digital display - stainless steel coolant system - various flanges - fine pole pitch of the magnetic plate - dresser - Flanges suitable for the Jung HF/JF 520 Very little-used machine from the test department (original paint) Price: ex stock, unpacked, uninsured, plus VAT. Delivery time: immediately - subject to prior sale. Payment: as usual - before removal - immediately upon receipt of invoice. Best regards Induba GmbH Mathias Becker

Condition: used, Year of construction: 1992, functionality: fully functional, grinding length: 600 mm, grinding width: 250 mm, feed length X-axis: 600 mm, feed length Y-axis: 250 mm, feed length Z-axis: 250 mm, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Control name: Siemens 810G Grinding length: 600 mm Grinding width: 350 mm Kfedpfx Ahewm H Hqo Uja Working area X / Y / Z: 600 / 250 / 250 mm MACHINE DETAILS Total power requirement: 8.8 kW Machine weight: approx. 2.7 t

Condition: reconditioned (used), Year of construction: 1995, Surface grinding machine Make Geibel & Hotz Model FS 40 Compact Year of manufacture: 1995 - partially overhauled, newly painted, RAL 7035 light gray / RAL 7012 basalt gray Machine no. 9200895 with guarantee Accessories: - Electro-magnetic clamping plate 400 x 200 mm (pole pitch: 5 mm) - Wet grinding device - Automatic vertical feed with digital display for vertical and transverse movement - Fine feed on the transverse path handwheel - Grinding wheel with flange Kfodpjd Rl Nqofx Ah Uea - Central lubrication device - Hand lever dressing device with dressing diamond - Transverse speed control, infinitely variable - Operating instructions - Used, as seen -

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Grinding width max. 200 mm Kedpfx Ahet Hwzie Ujfa Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Payment : net– after completion of contract

Year of construction: 1988, condition: excellent (used), New entry hydraulic surface grinding machine Z&B Ziersch FS 2045 T Bj.88 grinding area 500 x 200 mm - vertical dividing gear - my-Tipp- feed - electronic handwheel - autom. feed - digitalaz. automatic cross feed, continuous and intermittent, micro-fine adjustment cross - magnetic plate with demagnetization hydr. overhead puller - adjustable feet - machine checked through - all Kfjdpfsk Ufz Nsx Ah Uja functions there - runs very nice ! Pricing; ex stock - subject to prior sale and error.