Used surface grinding machines horizontal 400-699mm grinding length for sale (213)

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Machine equipped with Magnetic chuck Cjdenxi R Ujpfx Abrehd Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Lighting

Condition: used, grinding length:650 mm grinding width:450 mm workpiece height:425 (ohne Magnetplatte) mm max. workpiece weight:600 kg weight of the machine ca.:3,8 t total power requirement:15 kW machine dimensions approx. WxHxD:3,0 x 2,4 x 2,3 m Used/reconditioned surface grinding machine, make GER, type RSA-650. Csdpfx Abofkg H Tsrshd Automatic infeed in all 3 axes. Machine geometrically overhauled, repainted (RAL6011, green), all functions tested, accuracy checked. OVERHAUL SCOPE: Machine completely disassembled, all components thoroughly cleaned and tested for complete functionality. Main spindle newly mounted, concentricity 3 µ. All guideways newly scraped in new machine geometry. Wear parts replaced, defective components repaired or replaced. Reassembly, complete functional test and internal acceptance. Machine repainted. Machine in perfect condition, ready for production. MEASURED GEOMETRIC ACCURACIES: Actual geometric accuracy after overhaul, measurement with dial gauge. Geometry of machine axes X and Z X = longitudinal axis 650 mm Z = transverse axis 450 mm Measurement magnet traversed with dial gauge. X axis = Max. Deviation 0,008 mm Z axis = Max. Deviation 0,005 mm INCL. THE FOLLOWING ACCESSORIES: -Electro-magnetic clamping plate, with fine longitudinal pole pitch. dimensions 600 x 400mm -demagnetizing device -Complete coolant device with paper band filter - Digital display of the vertical axis (Y-axis), make Sony -Technical documentation in English language -1 pieces grinding wheel holders -1 piece grinding wheel dresser, mounted above the grinding wheel with manual infeed and automatic (hydraulically operated) transverse movement - 1 set of setting elements You can find more information in the attachment. Payment: 100% before loading the machine Warranty: 6 months on the geometry and the new parts demonstrably installed. No general legal warranty.

Condition: refurbished (used), functionality: fully functional, grinding length: 630 mm, grinding width: 230 mm, total height: 1,650 mm, total length: 1,535 mm, total width: 1,770 mm, grinding height: 360 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 20 m/min, grinding wheel diameter: 400 mm, table load: 180 kg, rotational speed (max.): 3,220 rpm, power: 1.5 kW (2.04 HP), disc diameter: 250 mm, Retrofit of Surface Grinding Machine TOS BSKF 20 NC with SCHNEIDER Control System - Machine is fully dismantled and retrofitted Standard Accessories: - 2-axis cycle control, manufactured by Schneider-Electric Functions: Infeed, Spark-Out, Dressing, and Compensation - Grinding wheel 250 x 20 x 76 mm - Grinding wheel flange - Electro-magnetic chuck 600 x 200 mm - Automatic feed on Y and Z axes - Diamond dresser holder (without diamond) Csdpfsxf Ez Ujx Abrohd - Coolant system with settling tank - Machine lamp - Centralized lubrication - Operating tools - Operating manual - CE declaration - Inspection report Included: Transport and packaging On-site relocation with crane/forklift Commissioning Travel and accommodation expenses Accessories: - Partial enclosure - Single-point diamond, 0.75 ct - Balancing arbor with nut and wrench - Grinding wheel balancing stand - Set of levelling elements - Oil filling

Condition: good (used), Year of construction: 1971, functionality: fully functional, For sale is a surface sanding machine of the brand Aba and type FF600/30 from 1971 The machine is fully functional and ready for use. Technical data: Sanding length: 600mm Sanding width: 250mm Workpiece height: 400mm Grinding wheel 300 x 30 x 51 mm Voltage: 380 V Power: 5.82 kW Chjdpfsqzhqbex Abrsd Weight: 1.7 tons Coolant system 2x grinding wheel holders On request, dismantling, loading and transport can be organized throughout Europe for an additional charge Prices plus VAT Glnld8 Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Cup Surface Grinding Machine / Cylinder Head Grinding Machine Max. grinding area: 835 x 200 mm Electromagnetic clamping plate: 500 x 200 mm Machine dimensions (L x W x H): 2070 x 900 x 1600 mm Machine weight: 1000 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Chsdewlbz Tspfx Abred DE - 44143 Dortmund - Wambel / Germany

Condition: used, Jung F 50 Surface Grinding Machine Condition: Used Technical Data Grinding Length: 500 mm Cedpsyuy Eujfx Abrjhd Grinding Width: 200 mm Grinding Height to Spindle Center: 285 mm Table Size: 700 x 200 mm Spindle Speed: approx. 3000 rpm Grinding Wheel: 225 x 20 x 51 mm Feed: manual via handwheel Rapid Traverse Wheel Dressing Device Dimensions (L / W / H): approx. 1850 mm / 1300 mm / 1750 mm Weight: approx. 1400 kg

Condition: new, Year of construction: 2026, MYS820 200×480 Magnetic Surface Grinder is an advanced machine designed for precision grinding of small and medium-sized metal components. Its compact design and modern technologies ensure high machining accuracy and reliable operation in industrial environments. Main advantages of the MYS820 200×480 magnetic surface grinder The MYS820 200×480 magnetic surface grinder is an ideal solution for industrial facilities requiring precise machining in a compact format. Designed for professional users, it combines advanced technologies such as automatic feed in two axes and precision guideways with a robust construction, ensuring reliability and efficiency. Its compact dimensions (1680 × 1140 × 1800 mm) and weight of 800 kg make it an excellent choice for smaller workshops and production facilities with limited space. Key benefits include: High grinding precision – precision guideways and automatic feeds enable machining accuracy of 0.01 mm in vertical movement, ensuring excellent surface finish quality. Compact working area – a 400 × 200 mm table is ideal for processing small and medium-sized components, increasing application versatility. Smooth automatic feed system – two-axis automatic feed provides precise movements with a maximum longitudinal travel of 530 mm and transverse travel of 220 mm, ensuring efficient machining. Chodpjycr R Sofx Abrsd Stability and durability – the massive 800 kg construction minimizes vibrations, ensuring stable operation during intensive use. Easy maintenance – centralized lubrication of guideways reduces manual maintenance requirements and extends machine service life. Ready for operation – equipped with digital readout and fully prepared for immediate production, minimizing downtime. Machine design and technology Robust construction and precision components The MYS820 200×480 magnetic surface grinder features a heavy-duty 800 kg structure that provides excellent stability during machining. Hardened and ground linear guideways eliminate vibrations, ensuring smooth table movement and high-quality surface finishing. The spindle, driven by a 1.1 kW motor, operates with a grinding wheel measuring 200 × 19 × 32 mm, allowing efficient processing of various materials. Advanced feed system The machine is equipped with automatic feed in two axes, providing: maximum longitudinal travel: 530 mm maximum transverse travel: 220 mm The precise transverse feed per handwheel rotation is 2.5 mm, while the vertical feed is 1.25 mm, allowing accurate adjustment of machining parameters to specific requirements. Technical specifications Parameter Value Table dimensions 400 × 200 mm Maximum longitudinal travel 530 mm Maximum transverse travel 220 mm Spindle-to-table distance 490 mm Grinding wheel dimensions 200 × 19 × 32 mm Manual transverse feed 2.5 mm/rev Manual vertical feed 1.25 mm/rev Spindle speed 2850 rpm Motor power 1.1 kW Machine dimensions 1680 × 1140 × 1800 mm Weight 800 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details grinding length 600 mm grinding width 400 mm workpiece height 375 mm workpiece weight 400 kg table longitudinal travel 650 mm table speeds 2 - 28 m/min table cross travel 400 mm speed 100 - 1000 mm/min grinding wheel size 300 x 50 x 76,2 mm grinding spindle drive 3,7 kW peripheral speed 10 - 32 m/sec total power requirement 11 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,95 x 2,65 x 2,47 m Additional information CNC Precision Surface Grinding Machine Table drive: hydraulic Cross-axis drive: electromechanical Electromagnetic plate: 600 x 400 mm with holding force control and automatic magnetic pole reversal for demagnetizing Cedpfx Aezzw Rtjbrjhd Features: Partially enclosed, open-topped loading compartment with a sliding door Cleaning kit for cleaning the work area with hand-held impulse nozzle Holder for prism arm with single-point diamond, MK 0 Grinding spindle speed control with V-constant controller Universal paper filter unit UPF 100, tank capacity approx. 280 liters Coolant pump: 20 liters/minute at 1.5 bar Machine light Without grinding wheels and flanges.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 3,600 kg, ELB Perfekt 6, year of manufacture 2002, grinding area 600 x 400 mm, grinding wheel 300 x 50 mm, 4 kW spindle power, automatic grinding cycle, roughing, finishing, spark-out, lifting, dresser mounted on spindle head with compensation. The machine has been professionally overhauled by us and now meets the geometry of a new machine. The grinding spindle has new bearings. Accessories: electro-permanent magnetic clamping plate 600 x 400 mm, water tank with paper filter unit. All functions have been tested and the machine can be demonstrated under power at our facility. We are also happy to handle on-site installation and training, as well as future servicing. Financing/leasing is available; we will be pleased to provide an offer! Csdjxdalfepfx Abrjhd

Condition: used, Year of construction: 1977, Surface grinder, manufactured by Okamoto, type PSG-63 UA, year of manufacture 1977. Magnetic chuck: 600 mm x 300 mm. Grinding dimensions: Length 630 mm, width 310 mm, height 350 mm. Ready for use. Csdpfx Aboiz Tmkorjhd

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, feed length X-axis: 750 mm, feed length Y-axis: 340 mm, feed length Z-axis: 525 mm, workpiece weight (max.): 420 kg, grinding height: 455 mm, grinding wheel diameter: 350 mm, distance table to spindle center: 455 mm, table length: 600 mm, table load: 420 kg, type of input current: AC, table width: 300 mm, grinding wheel width: 40 mm, spindle speed (max.): 1,500 rpm, overall weight: 2,500 kg, Precision grinding machine for flat surfaces "OKAMOTO mod. ACC-63DX BV" with viewer on the grinding wheel descent axis and on the table transversal axis. Cjdeu T N Igjpfx Abrehd

Condition: good (used), Year of construction: 1989, functionality: fully functional, feed length X-axis: 650 mm, feed length Y-axis: 400 mm, feed length Z-axis: 230 mm, spindle speed (max.): 3,000 rpm, For sale is a surface grinding machine of the brand Okamoto, type PSG 52 UDX The machine is well-maintained and ready for immediate use Technical data: Year of manufacture: 1989 Grinding area: X-axis: 650 mm (manual) Z-axis: 230 mm Y-axis: 47 mm – 400 mm Max. height movement lower edge of new wheel (with ¯ 205 mm) min./max. - table) Grinding wheel ¯: Maximum ¯ 225 mm. Speed range: 3000 rpm (stepless speed control) Table feed: 0.3 – 25 m/min (hydraulic in X-axis) Table area ground: 550 x 200 mm Magnetic chuck: 500 x 200 mm (standard size) (Load incl. magnet max. 200 kg) Transport and loading can be arranged on request, for an additional charge, Europe-wide. Prices plus VAT Viewing possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? Chsdpfx Aewnnbrebrod For more information or ways to contact us, visit our website

Condition: used, Year of construction: 1995, Surface grinding machine Manufacturer: Jung Type: JA 500 CNC-C Cjdpfx Abjwp E Rgjrohd Year of manufacture: 1995 Overhauled in: 2003 Grinding length: 500 mm Grinding width: 200 mm Maximum workpiece height: 250 mm Table dimensions X/Y: 600 mm / 200 mm Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Rotational speed: 4,200 rpm Machine weight: approx. 2,500 kg 31126ä

Condition: excellent (used), Year of construction: 1978, grinding length 500 mm grinding width 200 mm Chjdpezbczrofx Abrod

Condition: used, Year of construction: 1968, grinding length 500 mm grinding width 200 mm workpiece height 250 mm turning speeds 1000 - 4000 U/min table surface area 600 x 200 mm grinding wheel size 225 x 20 x 51 mm grinding spindle drive 1,5 kW table feed 1 - 20 m/min total power requirement 2,6 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,6 x 1,6 x 1,8 m Automatic feed; 2-axis digital display; stepless speed control; Water-cooled sine angle magnetic clamping plate 400x135mm; 10mm magnetic pitch Cedpfewuuwyox Abrehd Sony digital display with scales for transverse and height adjustment Swing-out dresser on the grinding head Table direction reversal with contactless inductive switches LOSMA belt filter coolant system

Condition: good (used), Magnetic table 455 x 170 mm digital display water tank Honing device Wet sanding device Chodpfx Abstu Il Tored

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, The machine is in good working order. See the video. Cedpfjzimhwox Abrshd

Condition: used, Year of construction: 1970, Year ca. 1970 magnetic plate size 520 x 200 mm weight of the machine ca. 1,4 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Codpfx Aoirazpebrshd

Condition: good (used), Year of construction: 1986, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, grinding height: 580 mm, For sale is a surface grinding machine of the brand Aba and type FP-60/40 The machine is in good condition and fully functional. Technical specifications: Year of manufacture: 1986 Sanding area: max. (length x width) mm 600x400 Table surface sanded: mm 600x300 Clamping surface: max. mm 1020x300 Distance grinding spindle center table surface: max. mm 750 X-axis (longitudinal movement): Hydraulic longitudinal movement max. mm 720 Longitudinal feed speed m/min 3-30 Z-axis (transverse movement): Transverse movement electro-mechanical max. mm 360 Intermittent cross feed: mm/pulse 3-30 Cross feed: m/min 1.5 Y-axis (vertical movement): Vertical movement: max. mm 580 Vertical rapid traverse: m/min 0.250 Vertical feed automatic adjustment from/to: mm 0.001-0.999 Diameter: mm 400 Width: mm 50 (max. 60) Bore: mm 127 Grinding motor/power (standard) at 50 Hz: kW 11 Grinding motor/speed at 50 Hz: 1/min 1450 Grinding motor/speed-controlled power at 3000 17min: kW 11 Power consumption of the machine: KVA approx. 14 Weight of the machine: kg 3500 On request, transportation and loading can be arranged at extra cost. can be organized throughout Europe. Prices plus VAT Csdpfx Asuy S S Dsbrehd Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: new, Year of construction: 2024, neu 2024 5549 prompt, Zwischenverkauf v Taiwan 63870 € 1207.14 € 1 1 610 mm 610 mm 600 x 300 mm 300 x 600 mm 650 mm 700 mm 5 - 25 m/min 0 - 2,250 mm/min 3 - 32 (0,001) mm 320 mm 5,5 kW kW 0.74 kW 1 kW 1 kW 2950 mm 1490 mm 2080 mm 2200 kg 355 x 50 x 127 mm Cjdjwiqymopfx Abrjhd 1.450 U/min 0,001 mm 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator automatic dresser over the wheel, with compensation grinding wheel grinding wheel flange grinding wheel balancing stand balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH OPTIONAL EQUIPMENT: additional grinding wheel flange € 200,--

Condition: excellent (used), Year of construction: 1996, grinding length 600 mm grinding width 350 mm total power requirement 7,5 kW Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : GEIBEL & HOTZ CNC horizontal surface & profile grinding machine model FS 635 - Z CNC year 1996 Grinding length max. (table movement 660 mm) 600 mm Grinding width max. (cross movement 360 mm) 350 mm Mounting height under new grinding wheel 375 mm Distance table – center of spindle min / max 140 – 525 mm Standard size of magnetic plate 600 x 350 mm Table size 820 x 350 mm Max. table load 400 kg Table speed 5 – 35.000 mm/min Cross movement, intermittently 3 – 40 mm Cross-/Vertical quick feed 5 m/min Grinding wheel measurements 300 x 50 x 76,2 mm Chedpfx Abox Haryered Grinding spindle speeds, variable 1.000 – 3.000 rpm Grinding spindle-drive approx. 7,5 kW Total electrical load approx. 15 kW - 400 V - 50 Hz Weight approx. 2.600 kg Accessories / Special Features: • SIEMENS CNC control model 840 D with comprehensivel GEIBEL&HOTZ grinding software. User friendly interface, supported by dialog and graphics, simple programming also of complex grinding wheel profiling and easy linking of grinding cycles. • All standard grinding-programms and cycles as surface and multiple surfaces grinding with roughing-finishing-sparkout- return, plunge in grinding, automatic dressing cycle with compensation, etc. • electronic handwheel for 3 axis; cross feed (Z) and infeed (Y) effected by ball screw drive. • Table movement is actuated by belt drive (Z), which allows both very high and very low table speeds and is also ideal for profile grinding. • Hydraulically upwarding diamond dressing device mounted on the left side of the table (also for profile dressing); additional fixed dresser with automatic dressing cycle, including compensation. • Mounted sinus tilting magnetic plate 600 x 200 mm, fine pole division. • Separate paper band coolant filtration unit, separate switch cabinet, lamp for working area, various accessories, manuals, etc. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection of surface grinders – CNC or conventional - available. Please let us know your requirements.

Condition: new, Year of construction: 2025, neu 2025 050068 prompt, Zwischenverkauf v Taiwan 40360 € 770.88 € 1 Chodpfowirh Esx Abrod 457 mm 450 mm 457 x 203 mm 450 x 200 mm 215 kg 500 mm 530 mm 5 - 25 m/min 960 mm/min 0,4 - 6 mm 230 mm 0,002 - 0,04 mm/min 2850 1/min 1,5 kW 0.75 kW 0.04 kW 0.19 kW 3,7 kW 2200 mm 1575 mm 1950 mm 1320 kg 215 kg 250 kg 203 x 12,7 x 31,75 mm control panel on swiveling arm aut. vertical feed grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck coolant equiptment 34 lt with magnetic separator and dust exhaust manual dresser with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: 7570, 1 used: JUNG Surface and Profile Grinding Machine • Model: HF 50-R(D) • Machine No.: 7570 • Year of manufacture: approx. 1977, overhauled 06-1998 • Grinding area: 500 x 200 mm • Grinding wheel: max. 250 x 25 x 51 mm EQUIPMENT: Electro-magnetic chuck 450 x 180 mm 1 straight dresser mounted on the side of the spindle head 1 grinding wheel holder with wheel 1 universal paper band filter 1 frequency converter for speed control Leveling feet Chodpfxow R Tqpe Abrjd

Condition: used, Year of construction: 1953, grinding wheel dia. x width ca. 200 x 25 mm magnetic clamping plate ca. 450 x 170 mm cross feed of the table 200 mm revolutions of grinding spindle 3000 U/min grinding wheel hole diameter 51 mm weight ca. 1300 kg 0,001 - 0,013 mm grinding length 600 mm Surface grinding machine Includes extractor Cedpfxsxu Nw Es Abrehd 1 additional grinding wheel holder Machine was in occasional use until recently

Condition: good (used), 1 used surface grinding machine Manufacturer: Jung Model: HF 50 Codpfx Aboxgbb Tjrohd Technical specifications: - Z-axis travel: 400mm - X-axis travel: 500mm - Y-axis travel: 200mm - Table length: 720mm - Maximum spindle speed: 4000rpm - Table width: 200mm - Minimum spindle speed: 1000rpm - Transport dimensions: 2300mm x 1500mm x 1700mm (L x W x H) - Transport weight: 2000kg Equipped with: - Digital readout - Diaform device