Used swivel mills for sale (37)

Condition: excellent (used), Year of construction: 2010, Panhans PF45 swivel spindle milling machine in good, fully functional condition. The machine has only been used very rarely and has hardly any operating hours. Probably less than 100 operating hours. Therefore, it is slightly dusty. Year of manufacture: 2010 Swivel range: -5° to +45° Spindle diameter: 30 mm Vertical adjustment: 170 mm Spindle speeds: 3000 / 4000 / 6000 / 8000 / 10000 rpm Motor power: 5.5 kW Table size: 1,300 x 850 mm Weight: approx. 530 kg Right and left rotation of the milling spindle Optionally, a matching dust extraction system from Höcker Polytechnik / Nestro can also be purchased (see last picture). Djdpfx Aioz Dp Erozjwd The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses with exclusion of liability for material defects. No guarantee, warranty, or right of return.

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. Djdpfx Aezt Ai Eeizswd All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: excellent (used), functionality: fully functional, 4 speeds, ranging from 3000 to 10,000 rpm. Engine power: 4 kW. Table dimensions: 950 x 370 cm. Tilting spindle. CE marking. Year of manufacture: 2015. Mobile trolley integrated into the table. Dwjdpfx Aezzpchjizjd Rotation: right/left. Adjustable angle fence. Trolley lock. Manual adjustment of spindle angle and height. Cast iron table. External dimensions: 960 x 850 x 1280.

Condition: used, Year of construction: 1980, Used machine Year of manufacture: 1980 Dwsdpfx Aiez Dyd Sszod Table size 1100 x 760 mm Motor 4.7/5.7 kW, pole-changing with right/left rotation Milling arbor MK 5 / 30 mm Height and swivel adjustment via handwheel Spindle speeds 3000/4500/6000/9000 rpm Swivel range of the milling arbor -5 to +45° Milling stop with Panhans cast iron stop jaws mounted on a round insert plate and thus rotatable by 360° with Haffner 4-roller feed device Weight approx. 850 kg Availability: short notice Location: Flörsheim

Condition: excellent (used), functionality: fully functional, spindle diameter: 35 mm manual spindle lifting and lowering spindle rotation speed adjustable: 2900/4750/7750/12300 RPM star-delta starter safety switch micro-adjustment of the fence foot brake Dwedozipbgspfx Aizsd spindle lock dimensions: 1000x900x1100

Condition: used, Year of construction: 1999, Second-hand machine Year of manufacture: 1999 Dwsdpfx Aszk N Tfoizod Features and technical specifications: - with swivelling spindle: 0° – 45° - with aluminium roller table - Table dimensions: 1100 x 620 mm - Working height: 880 mm - Roller table dimensions: 900 x 200 mm - Roller table travel: 900 mm - Milling spindle diameter: 30 mm - Milling spindle stroke: 150 mm - Speeds: 3100/4600/6200/8000 rpm - Motor: 4 kW - with 4-roller feed unit - Dimensions: 1200 x 1000 x 1400 mm - Weight: approx. 490 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 5 h, power: 5 kW (6.80 HP), input voltage: 400 V, pivoting range: 45 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,500 rpm, table width: 530 mm, table length: 1,200 mm, overall weight: 510 kg, tool diameter: 240 mm, Equipment: CE marking, Professional woodworking machine with tilting milling spindle and cantilever arm. Exhibition machine Dodjyn Ny Uspfx Aizjwd like new - used only for demonstration purposes Milling unit made from cast iron, tiltable up to -45° backwards Four milling speeds from 3500 to 10000 rpm Forward and reverse rotation Height and tilt display accurate to 0.1 mm Quick speed change via eccentric clamping Powerful 5.0 kW industrial motor Curved milling hood included Made in Italy Milling spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Speed indication via LED display on the front panel Spindle shaft diameter 30 mm Max. tool diameter 240 mm Max. retractable tool diameter 230 mm Max. tenoning tool diameter 320 mm Accessories included: Mitre fence with two flip stops Eccentric clamp Curved milling safety guard Additionally, adjustable system fence jaws The machine can be inspected and tested at any time at the Chemnitz location.

Condition: used, Year of construction: 2000, Second-hand machine Year of manufacture: 2000 The T 110 is SCM’s table router, offering an ideal combination of quality and an affordable purchase price The structure is extremely sturdy For ease of use, all controls are within easy reach on the front of the machine Precise height adjustment of the tool is ensured by a mechanical indicator Spindle tilt from -5 to +45 degrees Table size 1000 x 750 mm Spindle clamping length: 140 mm Spindle overhang from the table: 20 mm Spindle speeds 3,000–4,500–6,000–9,000–10,000 rpm Max. diameter of the tool that can be lowered beneath the table: 320 x 40 mm Profiling tool, max. 250 mm Motor 4 kW Extraction nozzle 120 mm with 3-roller feed mechanism Weight 520 kg Dedpfxszk N Rdj Aizjwd Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Condition: completely inspected by the workshop Table size 2000 x 880 mm (entire table in a cast construction) with extendable frame support Drive motor with pole change, 5/6 kW Dwsdoz Dcp Dspfx Aizod Spindle speeds 3000/4500/6000/9000 rpm Vertical adjustment of the milling spindle 110 mm Swivel angle of the milling spindle 45° with Holz Her 3-roller feed mechanism Pictures show the machine in a condition prior to refurbishment. Availability: approximately 3-4 weeks after order receipt Location: Flörsheim

Condition: used, Second-hand machine Features and technical specifications: - heavy-duty cast iron construction - Motor: 5.5 kW - Spindle diameter: 30 mm - 2900–4400–6000–7800–10,000 rpm - Height and swivel adjustment: electrically driven Dwedpfx Ajzk N R Doizsd - Fine adjustment: via handwheel - with Panhans metal stop jaws - with Holz-Her 3-roller feed mechanism Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2023, Used Machine Year of manufacture: 2023 Condition: like new; machine has never been used Features and technical specifications: - Spindle speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm - Milling spindle tilt: 0 to -45° - Effective spindle length: 125 mm - Spindle arbor diameter: 30 mm - Speed display: LED display on the front of the machine - Max. tool diameter (standard): 240 mm - Max. lowerable tool diameter: 230 mm - Max. tool diameter for profile milling: 240 mm - Max. tool diameter for tenon milling: 320 mm - Work table length: 1,200 mm Dsdpfxjzk Nn Ao Aizewd - Work table width: 530 mm - Table height: 900 mm - Slide length: 1,200 mm - Slide width: 360 mm - Slide height: 142 mm - Exhaust port diameter: 2 × 120 mm - Drive motor power: 5.0 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Dimensions: 1,200 × 2,000 mm Weight: 510 kg Availability: available shortly Storage location: 63934 Röllbach

Condition: used, Year of construction: 1995, functionality: fully functional, input voltage: 400 V, input current: 125 A, input frequency: 50 Hz, type of input current: AC, pivoting range: 50 °, rotational speed (max.): 9,000 rpm, rotational speed (min.): 3,000 rpm, table width: 760 mm, table length: 1,100 mm, total height: 870 mm, overall weight: 850 kg, Equipment: CE marking, We offer this used Panhans 259 tilting spindle moulder, year of manufacture 1995. Type: 259 Machine No.: 4150 Year: 1995 Rated voltage: 400 V Frequency/Phases: 50 Hz / 3 Current type: AC Full load current: 125 A Dwodpfxjyxqqdj Aized Internal overcurrent protection: 20 A Table size: 1100 x 760 mm Table height: 870 mm Spindle mount: MK 5 Spindle speeds: 3000/4500/6000/9000 rpm Height adjustment: 120 mm Table opening, rotary disc diameter: 450 mm Swivel range: -5° - +45° Weight: approx. 850 kg Fully functional Pickup and disassembly at buyer's own risk/expense Location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Condition: used, Year of construction: 1988, Used Machine Year of manufacture: 1988 Features and technical specifications: - Table size: 2000 x 880 mm (entire table made of cast iron) - With extendable frame support - Drive motor, pole-changing, 5/6 kW - Spindle speeds: 3000/4500/6000/9000 rpm - Milling spindle height adjustment: 110 mm - Milling spindle tilt: 45° Dwedpfxo Agw S Ao Aized - With Holz Her 3-roller feed unit

Condition: used, Year of construction: 1984, Used Machine Year of Manufacture: 1984 Features and Technical Specifications: - 4.7/5.7 kW motor with pole change Dsdpozk N R Refx Aizjwd - Forward/reverse rotation - MK 5/30 mm spindle - Height adjustment via handwheel - Speeds: 3,000/4,500/6,000/9,000 rpm - Milling stop with metal jaws mounted on a round insert plate and therefore rotatable 360° - With table extension on both sides featuring an extendable frame support - With a roller table attached on the left side Attention! The table extension was retrofitted! To use the roller table, it must be removed again! - With 4-roller feed mechanism, manufactured in 2007 - Dimensions: 240x65x120 - Weight: approx. 900 kg Availability: available shortly Location: 63934 Röllbach

Condition: new, Year of construction: 2026, Spindle Moulder SCM / CASADEI F 25 M LL FK Robust professional woodworking machine with spindle tiltable ±45° to both sides and MK4 interchangeable spindle Article number: 5220730 Brand: Holzkraft CASADEI - Heavy-duty steel/cast iron construction - Dynamically balanced cutter unit anchored to the work table - Especially robust design - Smooth running thanks to precision units and high dead weight - Standard with forward/reverse operation and electronic lockout during rotation reversal - Five speeds from 3000 to 10000 rpm - Convenient speed change from machine side - Standard MK 4 interchangeable spindle system - Large precision-ground cast iron work table for lasting accuracy - User-friendly controls and speed display on the front of the machine - Large-format spindle fence with fine adjustment and aluminum fence jaws standard - Fence adjustment via crank handle - Numeric display of set spindle height accurate to tenths - Powerful industrial motors TECHNICAL DATA Dimensions and Weights Net weight approx.: 510 kg Dust Extraction Number of outlets: 2 Outlet diameter: 80 mm Number of fence outlets: 1 Fence outlet diameter: 120 mm Work Table Table length: 2500 mm Table width: 810 mm Table height: 923 mm Placement Information Space requirement explanation: Dimensions include max. travel distances or working lengths Working area length: 3700 mm Working area width/depth: 5000 mm Working area explanation: Please add the specified dimensions to the space requirement to get the recommended free footprint for the machine Electrical Data Connection voltage: 400 V Network frequency: 50 Hz Drive motor power: 7.0 kW Spindle Spindle tilt: -45° to +45° Usable spindle length: 140 / 180 mm (for spindle Ø 30 – 35 / for spindle Ø 40 – 50 mm) Spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speeds: 3000/4500/6000/8000/10000 rpm Maximum Tool Diameter Max. retractable tool diameter: 320 x 60 mm Max. profiling diameter: 250 mm Max. tenoning diameter: 350 mm Dedsy Ehcdjpfx Aizjwd Max. moulding diameter: 160 mm EQUIPMENT - Spindle fence: Heavy-duty professional version with aluminum jaws and fine-adjustment, adjusted from the front via crank handle with numerical digital display - Curved workpiece safety hood: ✔ - Spindle height adjustment: motorized, with digital readout - Spindle tilt adjustment: motorized, with digital readout - Control: motorized height and tilt adjustments with digital display - Control panel position: on machine body - Work table: extension left and right, and extendable workpiece support (total width 2500 mm) Location: ex-stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2001, Kity 629 rotary tiller Motor 2,2 KW/400 Volt Table size approx. 580x715 mm Finely adjustable milling fence spindle swivel + 30° to - 5° Right/left rotation of the milling spindle Speeds 4800/6400/8700 rpm Spindle stroke 130 mm Tool up to Ø 180 mm Suction connection 2 x 100 mm Location: ex stock 54634 Bitburg - immediately available - Dodpfer Id S Ejx Aizewd

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Standard Equipment and Accessories - Swiveling operator panel easily accessible for the operator, "eye-S 15" electronic control system. Includes: * 15" touchscreen monitor * Direct control of 6-8 axes with manual, semi-automatic, and automatic operating modes * Operator assistance with the option to manage 3 different points on the tool for accurate determination of the reference point (zero point) * Capability to store up to 1000 programs with associated images * Capability to store up to 1000 different tools with associated images * USB port * Ready for network connection - Operator aid on the electronic control, including: * Tool database management * Display of coordinates at 3 points on the tool for new reference (zero) point determination * Management of tool edge speed * Operator support for common machining tasks - "Flex" milling fence with automatic adjustment via the electronic control system. Complete fence adjusted to tool diameter, infeed jaw for required chip removal. Movable "FLEX" fence from the worktable. - Aluminium fence jaw for the milling fence with inserts for continuous support - "Fast" table insert, manually adjustable, replaces table rings for optimal workpiece support surface - Electrical pre-wiring for a power feed unit - Spindle rotation direction: right/left - Automatic motor start - Version M-E includes: * Electrospindle with max. performance from 3,400 rpm * Electrospindle power 7.5 kW (10 HP) [S6 -40%] * Interchangeable MK5 spindle * Inverter for speeds from 900 to 12,000 rpm - Interchangeable MK5 milling spindle Safety/Protection - Milling guard, max. tool diameter 160 mm Dwodpfjx Nbzuex Aizjd - Electronic motor brake effective even without mains power - Safety sensors during tool change for: spindle stop, spindle lock, opening/closing of tool holder - Electropneumatic spindle lock - Microsafety switch on machine door - Emergency stop button - Lockable main switch - Motor protection switch - Control circuit 24V - CE Declaration of Conformity - Frequency 50 Hz - Base - MACHINE LANGUAGE: German - Standard safety regulations - Manual device for feed support height adjustment according to workpiece thickness with mechanical digital display and horizontal adjustment according to tool diameter. Thanks to the operator panel column, this device allows the feed support to be swung away from the work table. - Voltage 400 V, EU - Quick tool clamping system "T-SET" Allows clamping/unclamping of tools via easy application with a compressed air gun. - L'invincibile TI 5 CE version - "LL" version worktable with two cast iron table extensions; total length 2500 mm, complete with extendable support rail for wide workpieces - Emergency stop switch - Milling spindle diameter 30 mm Availability: short-term

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - Table milling machine with swiveling milling spindle and table extensions Table milling machine with a swiveling milling spindle from -45° to +45° Stable steel cast iron construction Dynamically balanced milling head anchored to the work table Particularly robust design Smooth operation thanks to precision components and high weight Djdpfxsdqzcxs Aizjwd Standard with right/left rotation and electronic locking during direction change 5 speeds from 3000 - 10000 min-1 Speed change is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large work table made of cast iron for lasting precision Easy operation thanks to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence cheeks included as standard Powerful industrial motors Equipment details: Milling fence Milling fence with crank/handwheel adjustment from the front With numerical display Quick-change spindle Quick-change spindle MK 4 standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenon cutting operations and for slotting Scope of delivery: Manually swiveling milling spindle from +45° to -45° Speed display via LED on the front Aluminum fence cheeks Arc milling guard Right/left rotation of the milling spindle MK 4 quick-change milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article no.: 5220728 Technical data Dimensions of work table: 2500 x 810 mm Swiveling range of milling spindle: +45 to -45 degrees Usable length of spindle with Ø 30-35 mm: 140 mm Usable length of spindle with Ø 40-50 mm: 180 mm Milling spindle stroke: 90 mm Max. tool Ø for profiling: 250 mm Max. tenon tool Ø: 350 mm Max. form cutter tool Ø: 160 mm Max. tool Ø, plunge-cutting: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 min-1 Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle Ø on the fence: 1 x 120 mm Extraction nozzle Ø under the table: 2 x 80 mm Location: In stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1993, Used Machine Year of manufacture: 1993 Dodpfx Ajzyy Dteizewd Features and technical specifications: - Machine bed cast entirely from gray iron in a single piece - With wide table supports and dovetail guides for the vertical slide - With control panel above the table - Interchangeable spindle with MK 5, 30 mm diameter - Milling spindle swivel angle: 45°/22.5° - 2 motors: 5.5/7.5 kW – 400 V - 4 speeds without belt change: 3000–4500–6000–9000 rpm - Cast-iron table with table top extensions on both sides, 2150 mm - Solid cast-iron milling stop with quick adjustment (overall) and individual adjustment for both jaws - ELGO 89P23 control unit for height, tilt, and stop - Program memory for 99 programs - With sliding table insert - With Maka 4-roller feed unit - Dimensions L x W x H approx. 2150 x 1430 x 1740 mm - Weight approx. 1450 kg

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: Automatic height and swivel adjustment of the spindle with decimal pulses Mechanical display of spindle height and electrical display of tilt adjustment Hinged hood with aluminium guides Adjustable table top opening via table slide Dedjzk Nq Ropfx Aizjwd System for quick tool change with long tables and extendable workpiece support Table size 2500 x 780 mm Spindle adjustment – 45° to +45° Spindle diameter 30 mm Spindle stroke 230 mm Max. table opening: 300 mm 5.5 kW motor with automatic star-delta start with clockwise and anti-clockwise rotation Speeds: 3000/4500/6000/8000/10000 rpm Electronic programming of spindle height, spindle tilt and stop position (milling stop) Extraction at top and bottom: 120 mm Dimensions 2570 x 1450 mm Weight approx. 670 kg Availability: at short notice Storage location: Röllbach

Condition: excellent (used), Catalog number 8133 TECHNICAL DATA - Number of working spindles: 2 - Spindles pneumatically pressed against the material - Spindle diameter: 30mm - 2 pneumatic clamps - Hydraulically adjustable feed - Pump motor: 1kW - Max milling height: 60mm - Max milling length: 1200mm - Max milling width: 180mm - Motors: 2 x 2.6kW - Diameter of dust extraction nozzle: 2 x 80mm - Dimensions (L/W/H): 2650x800x1420mm - Weight: 760kg ADVANTAGES - Hydraulically adjustable carriage - Milling heads included, 2 pieces - Used milling machine, very good condition Djdpfxo Afdbdo Aizewd Net price: 9900 PLN Net price: 2302 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: used, Year of construction: 1987, Used Machine Dwedpfjzk Nzijx Aizjd Year of Manufacture: 1987 Condition: Completely Overhauled Features and Technical Specifications: - Table size: 1100 x 760 mm - Motor: 4.7/5.7 kW, pole-changing - With clockwise/counterclockwise rotation - Milling spindle: MK 5 / 30 mm - Height and swivel adjustment via handwheel - Speeds: 3000/4500/6000/9000 rpm - Swivel range of the milling spindle: -5 to 45° - Milling stop with metal jaws - Mounted on a round insert plate and thus rotatable 360° - With table extensions on both sides featuring extendable frame supports - With 4-roller feed mechanism Weight: approx. 900 kg Pictures show the machine in its pre-overhaul condition Availability: approx. 4 weeks after order placement

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Technical data Table size: 1100 x 760 mm Table height: 905 mm Milling spindle: 30 mm with quick-release nut Clamping height: 140 mm Height adjustment: 125 mm Dust extraction port: 2 x Ø 120 mm Stepless speed control: 1500-10000 rpm Motor power: 7.5 kW (10 hp) Net weight: approx. 880 kg Technical description 7" touch control, optional, top and bottom 7" capacitive touchscreen, also operable with gloves (e.g., Maxi Flex) Language selection: German, English, French (other languages on request) Tool zero point selectable in the program, 3 reference points Simple menu structure thanks to innovative touch control (max. 2 levels) Display (working screen) for tool and program number, height, angle, speed, and milling stop Operating hour counter Warning messages for incorrect operation Remote maintenance via the Internet (VPN tunnel) USB interface for data backup and loading of tools, programs, and users Tool database for 5 tools (20 programs possible per tool) Heavy-duty table milling machine with a double-sided swiveling, fixed milling spindle for a swiveling range of +/- 45.5° 2-axis positioning control for height and swivel adjustment Electronic position and speed indicators Stepless speed control: 1500-10000 rpm, 7.5 kW motor with 11 kW frequency converter Push buttons with electronic soft start Left and right rotation Tool quick-clamping device Finely planed gray cast iron table with a rigid frame support Milling stop 301: overall adjustment is carried out manually via 1 handwheel on the right side; adjustment range approx. 140 mm, scale display, overall stop via touchscreen +/- 0.1 mm, partial stop adjustment (chip removal) +5 mm to -25 mm is carried out via a star-grip screw on the left side, scale display via a mm nonius, clamping to the machine table manually via clamping lever screws, milling stop made of aluminum die-casting with 2 planed cast iron guide rails 500 mm long with aluminum splinter guards, maximum possible tool diameter is 250 mm Machine socket Lockable main switch Electronic, wear-free motor brake Milling protection and pressure device GAMMA V 1629 Arc milling stop 1639 Tapoa Milling spindle 30 mm with quick-release nut CE compliant including: - Milling stop type 301 - Cast iron guide plates and aluminum splinter guards - Milling protection and pressure device GAMMA V 1629 - Table slide for table top 1100 x 760 mm, surface coated, for quick, comfortable, and tool-free adjustment to different tool diameters up to max. 240 mm, including front table insert with quick-release locking up to tool diameter 155 mm instead of standard table inserts (not in conjunction with a rotary table) Dsdpfjx N Dhdox Aizjwd - Zeromaster reference dimension setting device for precise 0-point height adjustment of the milling tool to the table top for 24 V DC - Milling arbor quick-change system HSK-80 with spindle locking and milling arbor 30 mm instead of milling spindle 30 mm (higher concentricity and no sticking in the spindle as with the MK 5 or steep taper system) - Console

Condition: as good as new (ex-display), Year of construction: 2025, minimax ti 55es LL – Table saw The illustration shows the T 55 i elite s in its standard version. The professional machine for skilled tradespeople, featuring a pivoting milling spindle and 4 speeds. M Digital: motor-driven height adjustment and pivoting. Sturdy steel and cast iron construction. Oversized milling unit made of cast iron, pivoting up to -45° to the rear. LED display of milling speeds. Fast, trouble-free speed change via eccentric clamping. Clockwise/counterclockwise rotation. Display of height and inclination with 1/10 mm accuracy. Heavy-duty professional fence: with fine adjustment via rack and pinion, with numerical display, aluminum fence cheeks, 3-way positioning for quick repetition of the setting. Scope of delivery: Aluminum fence cheeks Arched milling guard Table extension on the left and right Model: minimax ti 55es LL Article no.: 5502252 Technical data Dimensions of the work table: 2500 x 655 mm Dimensions of the format sliding table Dodpfx Aiodqzh Rjzswd Usable length of the spindle: 125 mm Max. tool diameter: 240 mm Max. tool diameter (lowered): 230 mm Max. tool diameter (dovetail cutter): 320 mm Spindle inclination: 0 to -45 degrees Speeds: 3500/6000/8000/10000 min-1 Motor power 400 V/ 50 Hz / S6-40%: 5.0 kW Dust extraction port diameter: 2 x 120 mm

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Solid German engineering Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE-compliant GS tested Table size 1100 x 760 mm Table height 870 mm Milling spindle not exchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and Dwodsr Ig H Topfx Aizsd RAL 5000 violet blue Net weight approx. 800 kg Equipment: Top control panel Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Location: ex stock 54634 Bitburg - immediately available -