Used thickness planer for sale (204)

Condition: excellent (used), Planer width 510 mm Min/Max. working height 3 - 240 mm Motor power 4.0 kW, 400 V, 50 Hz Speed of planing shaft 4500 rpm Diameter of planing shaft 120 mm Planer knives 4 pcs Dimensions of thickness table 510 x 850 mm Feed speed 6.5 / 10 / 13 / 17 m/min Dust extraction diameter 120 mm Electric height adjustment Handwheel for fine adjustment of thickness table height Articulated pressure bar 2 pcs under-table rollers Low-voltage release Emergency stop switch Knife setting gauge Gjdpfx Aaj Aaw H Njnjbw Test report for conformity with Section 4 of the Machinery Ordinance 1 set of spare planer knives Dimensions approx. L x W x H = 1000 x 900 x 1450 mm Weight approx. 900 kg Note regarding used machines: • Subject to errors in technical specifications and prior sale. • Stated prices are ex-works and include free loading. • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at the location. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address and telephone number!)

Condition: excellent (used), Catalog number: 7775 TECHNICAL DATA - Shaft width: 640mm - Number of knives: 4 pcs - Maximum thickness of the workpiece: 300mm - From top to bottom: - Feed pawls - Toothed, pulling, and twisting infeed roller - Pressure roller - Planing roller - Pressure roller - 2 smooth, pulling, rubber outfeed rollers - Digital display of planing thickness - Motor: 5.5kW Gedszx Sx Topfx Aanebw - Electric table lifting: 0.7kW - Stepless feed rate adjustment: 6-20m/min - Feed motor: 1.1kW - Diameter of dust extraction port: 150mm - Dimensions (L/W/H): 1000x1400x1200mm - Weight: 950kg ADVANTAGES - Made in Italy - Electric display of planing thickness - Electric table lifting - Used planer, very good condition, original DTR documentation, CE Net price: 28500 PLN Net price: 6628 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, Maximum working height: 20 cm Gbodpfxoz Dv Ugs Aanjw Maximum working width: 25 cm Electrically driven rollers Smoothly adjustable roller speed

Condition: used, Year of construction: 1989, with positioning control and Tersa cutterblockcleaned, function tested, test run- machine lubricated- test run- infeed rollers renewed- outfeed rollers renewed- rubber lip front and rear renewed- test planingspare parts:Panhans feed rollers, overhauled controlused, good conditionmake Panhanstype 435year of construction 1989Masch.-Nr. 170GS-testedmotor 5,5 kW / 0,25 kWplaning width approx. 510 mmplaning height approx. 250 mmlink pressure beamrubber infeed rollerrubber outfeed rollerfeed 7/14 m/ber of knives 4 piecesknife systemTersa reversible kniveselectric height adjustmentautomatic positioning controlsound insulationexhaust connection D 160 mmspace requirement approx. 1100 mm x 1200 mm x 1200 mmweight approx. 950 kgtotal connected load approx. 5,75 kWstorage location 97447 Gerolzhofen, free on truck, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Gbodpfx Ajvwfbisanow

Condition: used, Thickness planer SCM S 63 - used - Segmented pressure beam, Gbjdpoxm R Uvofx Aansw Under-table roller, Separate feed motor ----- Technical specifications ----- Planing width: 630 mm, Number of knives: 4 pcs., Passage height: 235 mm, Feed speed: 6 /9/12/18 m/min., Extraction nozzle Ø: 180 mm, Weight: 1035 kg

Condition: like new (used), functionality: fully functional, planing width: 630 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,500 rpm, total length of planing tables: 1,000 mm, total width: 650 mm, overall weight: 790 kg, Equipment: CE marking, The CASADEI R63 H3 is a professional thickness planer designed for the precise machining of solid wood components. Its robust and heavy-duty construction ensures stable operation, even under intensive use in woodworking and production facilities. The machine is equipped with a planing shaft with a working width of 630 mm and smooth feed speed adjustment in the range of 5–25 m/min. Technical specifications: - Manufacturer: CASADEI - Model: R63 H3 - Year of manufacture: 1999 - Maximum planing width: 630 mm Gbsdpfx Aaezxxgqsnjw - Maximum planing height: 300 mm - Minimum planing height: 4 mm - Maximum material removal: 8 mm - Minimum workpiece length: 250 mm - Work table length: 1000 mm - Planing shaft diameter: 120 mm - Number of knives: 4 - Knife dimensions: 630 × 35 × 3 mm - Shaft speed: approximately 4500 rpm - Adjustable feed speed: 5–25 m/min - Feed roller diameter: 85 mm - Power according to nameplate: 10 kW - Power supply: three-phase - Current draw: 18 A - Weight according to nameplate: 790 kg Key advantages: - Large working width – 630 mm - Four-knife planing shaft - Smoothly adjustable feed - Maximum workpiece height up to 300 mm - Massive and stable construction - Reputable Italian manufacturer - Machine designed for professional use This machine is ideal for use in a woodworking shop, sawmill, or company involved in the production of furniture and wood components. Condition: used, with normal signs of wear commensurate with its age. Inspection possible on-site. On-site testing of the machine is possible. Financing options are available through leasing or installment plans. The machine has been technically inspected and is ready for further use. It is possible to start and test the machine on-site, allowing you to assess its condition and performance parameters before purchase. For customer convenience, we offer financing options in the form of leasing or installments. We assist with the formalities and help you choose the most advantageous financing option. WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: good (used), functionality: fully functional, power: 5.5 kW (7.48 HP), Table milling machine KAMRO, spindle D=30mm, Gbedpfsyxwwkox Aanew

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: Planing width: max. 630 mm Planing height: 2.8 - 300 mm Maximum planing removal: 12 mm Workpiece length min.: 270 mm Weight: approx. 1,200 - 1,400 kg Table length: 1,260 mm Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; buttons for manual quick and fine adjustment of the planing thickness according to digital display, push buttons for starting and stopping the cutterhead, integrated operating hour counter - Cutterhead: Tersa full steel cutterhead with Z 4 - Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles for tilt stability, table surface finely planed - Feed: 2 speeds 6 / 12 m/min - Extraction: Hinged, split hood with chip extraction connection Ø 160 mm, can be connected on the left / right (in special cases on both sides); minimum extraction air volume: 24 m³/min at 20 m/s, negative pressure 1,050 Pa Planing width: split hood with chip extraction connection - Maintenance device: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease fittings Accessories: 1 grease gun, filled with long-life grease 1 oil can 1 adjustable wrench 1 tool for cutter replacement 1 pair of blank cutters 640 mm 2 pairs of TERSA reversible cutters 640 mm CV - Electrical equipment: Electronic soft start/brake device; contact for controlling the extraction; motor circuit breaker and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (infeed / outfeed); required voltage supply: 3 ~, 400 V - 50Hz - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idling noise (without extraction) P1 65 Working noise (with extraction) P1 77 Idling noise (without extraction) P2 65 Working noise (with extraction) P2 77 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idling noise (without extraction) 84 Working noise (with extraction) 90 - Dust emission DGUV test "tested for wood dust" according to DGUV 209-044 / BGI 739-1 Special equipment: -Drive power 7.5 kW (10 hp) -2nd rubber feed roller, ø 85 mm, complete -Thickness table extension, foldable, 630 x 450 mm -Special speed 6,000 rpm Location: Rieth Gjdpfx Aaoz A Hhuensbw

Condition: excellent (used), CATALOGUE NUMBER 8063 Technical data: - roller width 640mm - number of knives 4 pcs - max. thickness of workpiece 300mm – from top to bottom: - pawls - toothed, pulling, twisting infeed roller - pressure roller - planing roller - pressure roller - smooth, pulling, rubber outfeed roller - digital thickness display - motor 7.5kW - electric brake - electric table lifting - 4 types of rotational speeds 5000/8000/12000/19000m/min - diameter of dust extraction nozzle 160mm - dimensions L/W/H 1400x1100x1250mm - weight 955kg Advantages: - made in Italy - electric thickness display - electric table lifting Godpfx Aajzrwdnenobw - unpainted - used thicknesser, very good condition, original DTR documentation Net price: 32900 PLN Net price: 7651 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), Catalog number: 7695 TECHNICAL DATA - Shaft width: 640mm - Number of knives: 4 Gsdpfszu Sacsx Aanebw - Max. thickness of the workpiece: 200mm *From above: - Ratchets - Toothed, sequential (divided, segmented) feed shaft - Pressure rollers - Planing shaft - Pressure rollers - Smooth feed-out shaft *From below: - Smooth sliding shaft (at the inlet) - Smooth feed shaft (at the outlet) - Adjustable rollers in the lower bed - Electric bed lifting - Main motor: 7.5kW - Infinitely variable feed speed adjustment: 8-24m/min - Diameter of the dust extraction nozzle: 180mm - Dimensions (L/W/H): 1400x1100x1650mm - Weight: 1650kg Net price: 17900 PLN Net price: 4163 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to currency fluctuations)

Condition: used, Year of construction: 2019, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 120 mm, number of blades: 96, actuation type: electric, Equipment: CE marking, - Year of manufacture: 2019. - Condition: very good. Gjdpfezim Rrsx Aansbw TECHNICAL SPECIFICATIONS: - Planing width: 630 mm - Planing height: 3-300 mm - Digital control of table height with display - Motor: 7.35 kW - Maximum chip thickness: up to 8 mm - Minimum workpiece length: 250 mm - Diameter of planing shaft: 120 mm - Silent-Power spiral shaft, i.e., very quiet with four-sided knives - Self-aligning planing knives, i.e., no adjustment required after rotation - Additionally, 2 rollers in the table for processing wet or resinous wood - Smooth feed speed adjustment from 4-16 m/min - Power supply: 3 x 400 V - Diameter of dust extraction port: 160 mm - Weight: 845 kg - Dimensions (L / W / H): 125 x 115 x 114 cm

Condition: used, top machine with adjustable feed roller suspension infinitely variable feed Gbjdpfx Aajvwghqsnew electric height adjustment used, top equipment make Brugg type HDA-85 machine no. 8527 planing width approx. 850 mm planing height approx. 250 mm table sliding rollers 2 adjustable articulated pressure beam feed approx. 6-24 m/min. number of knives 4 knife system strip planing knife digital display for planing height analogue electric height adjustment with handwheel fine adjustment extraction connection D 180 mm space requirement approx. 1500 mm x 1400 mm x 1900 mm weight approx. 2000 kg storage location 97447 Gerolzhofen, free loading, unpacked handed over in the current condition as seen, without guarantee and warranty

Condition: used, Planer, thicknesser Krummen & Katz 4/26. Gbedpfjzkruljx Aanjw

Condition: excellent (used), SCM S52 thickness planer Max. planing width: 520 mm, Max. planing height: 240 mm, 4 classic knives (wedge-type), electric lifting + manual lifting, feed speed infinitely adjustable, metal infeed roller, 2 rollers in the table, adjustable, digital height display, 160mm dust extraction port, 5.5KW motor, quiet operation, machine in good condition. Gjdpsza Dg Hofx Aanobw

Condition: excellent (used), SCM S 52 Thicknessing Machine - Max. planing width 52 cm - Max. planing height 24 cm - Electric planing height adjustment - 4 standard knives - 4 feed speeds - Table roller In very good condition. Gbodpfx Aaoz I Ihtsnew

Condition: excellent (used), Year of construction: 2018, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 630 mm, overall weight: 1,100 kg, Felder Format-4 Thicknesser, model Exact63 – featuring Silent-Power spiral cutterblock and Digi-Drive. A high-quality industrial thicknesser from Austria, engineered for high precision, efficiency, and continuous operation. The machine combines robust construction with advanced technology and excellent ease of use—ideal for professional joinery workshops and industrial woodworking. Equipment and features: *Silent-Power spiral cutterblock – for efficient planing and a superior surface finish. *Digi-Drive digital table height adjustment – ​​simply enter the desired dimension, press start, and the table automatically adjusts to the exact height. *LED display – shows the set value and current table height. *4 programmable settings – for smooth and efficient operation. *Variable feed speed, 5–20 m/min – adjust the speed to suit the desired result, ranging from a fine finish to rapid material removal. *Table extension – provides better support when handling longer workpieces. *Segmented infeed roller. *Additional outfeed table. Benefits: High precision and consistent planing results. Robust construction with high-quality components. High productivity during continuous operation. Gjdpfxez R I Sae Aanobw Advanced technology and user-friendly operation. Specifications: Working width: 630 mm Maximum planing height: 3–300 mm Motor power: 10 hp Feed speed: 5–20 m/min Year of manufacture: 2018 Premium machine in near-new condition. Transport across Europe can be arranged at a good price.

Condition: used, Thickness planer SAC RS/530 - used - Segmented pressure beam, electric height adjustment, under-table roller, separate feed motor Gbsdpfxew I T N Hj Aanjw ----- Technical Data ----- Planing width: 530 mm, Number of knives: 4 units, Passage height: 240 mm, Feed speed: 7 / 14 m/min, Extraction port Ø: 140 mm, Motor: 4 kW, Weight: 840 kg

Condition: used, Technical specifications: Max. planing width: 500 mm Max. planing height: 250 mm Cutterhead diameter: 110 mm Number of knives: 3 2 feed speeds Manual lifting Power supply: 380 V Gedpfx Aszd Evvsansbw Motor power: 4 kW Overall dimensions: Length: 1000 mm Width: 1100 mm Height: 1400 mm

Condition: excellent (used), Catalog number 8052 TECHNICAL DATA - Roller width 640mm - Number of knives 4 pcs - Max. thickness of the workpiece 240mm - From top to bottom: - Feed fingers/ejectors - Toothed, pulling, and twisting infeed roller - Pressure roller - Planing roller - Pressure roller - 2 smooth, pulling, metal outfeed rollers - Motor 5.5kW - Electric table lifting - 4 feed speed settings: 6/9/12/18 m/min - Feed motor 1.1kW - Diameter of the dust extraction nozzle 160mm - Dimensions (L/W/H) 1300x1100x1400mm - Weight 1060kg ADVANTAGES - Made in Italy - Electric table lifting - Used thickness planer, very good condition, complete with technical documentation Gbedpfx Aszx Sr Tjanew Net price: 19900 PLN Net price: 4628 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: used, Thickness planer, planer 5/26 Gbedezkh D Njpfx Aanjw

Condition: reconditioned (used), Model: MAGIC PSL 630 Type: Thicknessing Planer (Dickenhobelmaschine) Technical Specifications: Max. planing width: 630 mm Max. planing height: 245 mm Max. depth of cut: 10 mm Cutter block speed: 5000 r.p.m. Diameter of cutter block: 120 mm Gbedpsw Eb Nwjfx Aanew Feeding speeds: 6 to 18 m/min Spindle motor: 7.5 HP Overall dimensions: 1300 x 980 x 1080 mm Net weight: 980 Kg

Condition: used, SAC RS/530 Thicknesser width mm. 530 Gjdpfeyzfvgjx Aanobw

Condition: excellent (used), Planing width 520 mm Min./Max. working height 3 – 240 mm Motor power 5.5 kW, 400 V, 50 Hz Speed of planing shaft 4500 rpm Diameter of planing shaft 120 mm Planing knives 4 pcs Dimensions of thickness table 520 x 850 mm Feed rate 6.5 / 10 / 13 / 17 m/min Dust extraction diameter 150 mm Electric height adjustment Handwheel for fine adjustment of thickness table height Spiral-toothed steel feed roller Segmented pressure bar 2 steel extraction rollers Table roller Low voltage release Emergency stop switch Knife setting gauge Test report for conformity with Section 4 of the AM-VO NEW V-belts NEW BALL BEARINGS NEW PLANING KNIVES Dimensions approx. L x W x H = 1120 x 990 x 1000 mm Weight approx. 600 kg Gedpfey Egmuex Aansbw Note on used machines: • Subject to errors in technical specifications and prior sale. • Prices quoted are ex-works, pick-up only – free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address and telephone number!)

Condition: used, Technical data: Gbedpfxslp N Tye Aansw Max planing width: 630 mm Max planing height: 250 mm Knife shaft diameter: 120 mm Number of knives: 4 1 roll in the countertop Feed speed: 6-18m/min Electric lifting Power: 400V Motor power: 5.5 kW Overall dimensions: Length: 1300mm Width: 980mm Height: 1120mm

Condition: good (used), Code: 0299 Brand: SCM Model: S 630/E - CE Standard Automatic thickness planer for carpentry workshops, custom furniture, wooden window frames, wooden carpentry, sawmills, plastics, composite materials, and various - CE Standard Technical data: Electronic table positioning Pneumatic roller pressure adjustment Drive system with 3 large-diameter motorized upper rollers - Easily interchangeable Electronic feed speed variator 4/20 mt/min Work table dimensions 630 x 1000 mm Max working width 630 mm Min/max working height 3/300 mm Gbedpfxeyi E T Te Aanew Min working length 260 mm N° 4 knives Motor Hp 7,5 Feed motor Hp 2 Suction mouth diameter 150 mm Overall dimensions mm 1360 x 1080 x 1220 h Weight kg 1000