Used tool milling machines - NC/CNC over 1000mm X-axis travel for sale (12)

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 1524 x 596 x 584mm, Table 1930 x 356mm, Spindle speed 5000rpm, Motor 5.75kW, ProtoTRAK SMX 3 axis control, ISO40 Spindle taper, 127mm Quill Travel, Dedpfx Agoyynvyj Rsur Interlocked guards, Power Drawbar, low Volt light.

Condition: good (used), Year of construction: 1995, functionality: fully functional, SHW UF 31, year of manufacture 1995, Heidenhain TNC 415 B control, travel X/Y/Z 1000/700/625 mm, feed rate X/Y/Z 2,000 mm/min, rapid traverse X/Y 4,000 mm/min, rapid traverse Z 2,000 mm/min, rotary table feed up to 4 rpm, main drive 20 kW, tool holder SK 50, programmable milling head, swivel time horizontal/vertical 6 sec, NC rotary table, spindle speed stepless up to 2,500 rpm, spur gearing, milling head swivels +/- 90°, quill manual 115 mm, quill motorized 100 mm, electronic handwheel, connected load 35 kW, milling spindle bearings replaced in 2025. Dedpfxeyx Un Tj Ag Reur

Condition: ready for operation (used), Year of construction: 2007, XYZ SMX SLV 3 Axis Turret Milling Machine ProtoTRAK | SMX Control (2007) 3 Axis CNC Capacity (X Axis, Y Axis & Quill) Spindle Taper ISO 40 Spindle speeds to 70 - 3600 RPM Table Size 1473 x 305mm Table Travel: Dsdpfx Ajx Tiq Ssg Rour X - 1000mm Y - 410mm Knee Travel: Z - 413mm Quill Travel Z - 127mm Air Power Draw Bar Supplied with a range of spindle tooling Coolant Year of Manufacture: 2007 Weight: 1850 Kgs Power Requirements: 18A *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79109 Machine Serial Number: 12308 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Dsdpfx Ajxftqdeg Rour Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: used, Year of construction: 2001, functionality: fully functional, feed length X-axis: 2,700 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,000 mm, travel distance X-axis: 2,700 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 25,000 rpm, spindle speed (min.): 100 rpm, rotational speed (max.): 25,000 rpm, rotational speed (min.): 100 rpm, Equipment: rotational speed infinitely variable, 5-AXIS MACHINING CENTER Duodpsx Ryxhsfx Ag Ror BI-ROTARY HEAD AUTOMATIC TOOL CHANGER FOR 20 TOOLS, HSK 63

Condition: ready for operation (used), Year of construction: 1998, All detailed information is in the photos. For further details, please contact us. Dujdpsw Dt Tlefx Ag Ror

Condition: used, Year of construction: 1989, Universal Milling Machine ALCERA type 100 M Travel X: 1000 mm Travel Y: 450 mm Travel Z: 600 mm Cone SA40 Spindle speed: from 40 to 2000 RPM Table size: 1400 x 320 mm Year of construction: 11/1989 Scale 3 axes HEIDENHAIN Centralized grease pump Feeds: auto X - Y - Z Joystick command Lubricant pump Voltage: 380 V Width: 2100 mm Depth: 2400 mm Total height: 2000 mm Weight: approx 3 T Duodjx Ekafopfx Ag Rer

Condition: used, Year of construction: 1991, x-travel 1000 mm y-travel 500 mm z-travel 700 mm table surface area 1250 x 700 mm spindle taper ISO 50 spindle turning speed range 20 - 3200 U/min quill stroke 100 mm semi-automatic operated Phillips 432 Number of working hours 62.340 h main drive motor 22 kW total power requirement 27 KVA weight of the machine ca. 7,7 t base area 3,8 x 4,1 x 2,4 mm accessories: hydr. Schraubstock X axis, longitudinal 1,000 mm Y axis, vertical 500 mm Duodotv Ii Iepfx Ag Rer Z axis, cross 700 mm Min./max. distance from vertical spindle to table top 138 / 600 mm Overhang max. approx. 800 mm Spindle taper SK 50 with inner cooling Spindle speeds (infinitely variable in 2 steps) 20 - 3,200 rpm Feed motion YXZ 1 - 3,000 mm/min Rapid traverse XZ 6,000 mm/min, Y = 5,000 mm/min. Rotary axis as 4th axis with housing of the working area

Condition: ready for operation (used), Year of construction: 2017, operating hours: 135 h, functionality: fully functional, machine/vehicle number: 6693371/1, travel distance X-axis: 1,480 mm, travel distance Y-axis: 1,090 mm, travel distance Z-axis: 617 mm, total height: 2,320 mm, total length: 2,800 mm, total width: 2,000 mm, working range: 1,480 mm, spindle motor power: 3,600 W, tool diameter: 32 mm, Equipment: documentation/manual, 4-Axis CNC Machining Center ISEL FlatCom XL142/112 EC-Servo – 10/2017 X1480 Y1090 Z617 – 3.6 kW spindle / 17,750 rpm (ER32) – 135.53 operating hours – 4th axis Ø600 L1000 – PC + remote control Ready for use, can be seen powered on Location: Industrial zone 06510 CARROS Machining center / 4-axis CNC milling machine ISEL FlatCom (iselgermany), EC-Servo configuration, year 10/2017, Serial no.: 669371/1, CE marked. Dimensions: length 2.80m – width 2.00m – height 2.32m Machine in “as new” condition, very little use, fully tested. Hours: 135.53 operating hours 144.04 powered-on hours Axes: 4 axes, with 4th rotary axis (effective diameter 600 mm, length 1000 mm) Travel: X 1480 mm / Y 1090 mm / Z 617 mm (on 4th axis) Usable table: 1540 × 1500 mm – T-slot table Transmission: ball screws, linear guideways Drives: EC-Servo motors SPINDLE / TOOLING ISEL VKH75/26-75T spindle: 3.6 kW, 17,750 rpm ER32 collet Pre-equipped for pneumatic tool changer (ATC): tool magazine not included, but can be added (arrange through supplier) 2 tool holders (1 mounted on the machine) Tool length probe included Cooling: spindle air + included chiller Control / PC / Software ISEL control + REMOTE software License included and transferable No dongle/keys/codes required PC + monitor + keyboard included (Windows 7) WORKSHOP / SAFETY Power supply: 400V three-phase, 16 A Duodjycqm Eepfx Ag Rer Compressed air required: yes, 8 bar (for pneumatic components) Dust extraction: not included Lubrication: none Enclosure with emergency stop Noise level: approx. 50 dB max Dust extraction port/connection prepared: no Condition / Testing Condition: “as new”, no known issues (play, errors, sensors: nothing to report) Last tested: 13/01/2026 All movements tested OK Included Machine + electrical cabinet PC/monitor/keyboard Software & license 4th rotary axis 2 tool holders + collets + clamping kit (Allen keys) Various clamping accessories + tool length probe Set of end mills / drills included (see photos) Brand: ISEL Model: FlatCom XL142/112 EC-Servo Year: 10/2017 Serial number: 669371/1 Axes: 4 + 4th rotary axis (Ø 600 / L 1000) Travels: 1480 × 1090 × 617 mm Table: 1540 × 1500 mm, T-slots Spindle: 3.6 kW – 17,750 rpm – ER32 Pre-equipped for pneumatic tool changer (ATC), magazine not included Power: 400V three-phase – 16A / Air: 8 bar Hours: 135.53 operating / 144.04 powered-on

Condition: used, Year of construction: 1991, CNC Vertical Milling Machine RAMBAUDI type RAMMATIC 600 Travel X 1260 mm Travel Y 690 mm Travel Z 600 mm Numerical Command NUM 1060 Cone SA 50 Table size 2000 x 600 mm Year of construction 1991 Voltage 380 V Depth 2500 mm Total height 4000 mm Weight: approx 9 T Dodpfx Ajxxlr Tog Rsur

Condition: good (used), Year of construction: 1992, Travel X/Y/Z: 1000/500/500 mm Control: Heidenhain TNC 415 B Spindle: SK 40 Duodpfjtmtvljx Ag Ror Speed range: 0 - 5000 rpm Coolant device Universal milling head Can be swiveled and manually indexed via scale, can be swiveled away for horizontal machining

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, feed length X-axis: 1,300 mm, feed length Y-axis: 900 mm, feed length Z-axis: 700 mm, travel distance X-axis: 1,300 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 100 rpm, 3-axis machining center 30 tools ISO 40 Dedpfx Asx Rx U Isg Rour CNC SELCA 4045PD