Used tool milling machines - univ.conv. 0-399mm X-axis travel for sale (127)

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: DC55-031, feed length X-axis: 1,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 800 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, mount diameter: 175 mm, position of the milling head: 150 Achse Y, type of input current: three-phase, rotational speed (max.): 6,000 rpm, overall weight: 15,000 kg, table load: 1,000 kg, input voltage: 400 V, space requirement width: 4,000 mm, space requirement length: 6,000 mm, space requirement height: 3,000 mm, year of last overhaul: 2025, workpiece weight (max.): 1,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machines are equipped with spindle speeds of 0-6000 rpm and SK 50 spindles. The first gear stage, 0-1000 rpm, can be switched to a lower gear ratio, providing very high drive power even in the low speed range, suitable for heavy machining. The pallet changer handles 2 pallets; a total of 8 pallets are available and compatible with both machines. The tool changer has 40 positions. Additional equipment: Internal cooling system Chip conveyor Paper band filter system Separate oil cooler Various tool holders 1x Double angle plate 800 x 800 mm, manufacturer Kelch 3x Double angle plate 800 x 600 mm, manufacturer Kelch 4x NC vise Almatic Type NC 200 with 2 base plates (can be assembled as a clamping tower) Optionally, a second machine of the same type is available. Codsz D Tp Uspfx Al Aehc Disassembly of the machine is possible after costs have been covered, with self-disassembly preferred.

Condition: excellent (used), functionality: fully functional, The dividing head is equipped with an SK40 spindle and has a spindle bore of 25mm. It can be swiveled from right to left up to 90° each. The dividing head spindle can be tilted 6°/15° from and towards the machine. It is suitable for all Deckel FP series milling machines and their "licensed machines," such as the Macmon M100. The distance from the spindle axis to the tailstock guide is 100mm. Direct division is possible using a 360° division circle or 24 x 15° indexing. The distance from the dividing head center to the tailstock center is 400mm. Indirect division is achieved with a worm gear of 40:1, using a scale disk with 1' division or three different hole disks (A: 27; 31; 34; 41; 43 – B: 33; 38; 39; 42; 46 – C: 36; 37; 40; 58). Also included are a Röhm four-jaw chuck, a three-jaw chuck (possibly Röhm) with adapter rings, and a two-jaw chuck, as well as a tailstock with a tailstock bearing. The dividing head, which was originally non-functional, along with all accessories, has been disassembled into individual parts, refurbished, made fully functional, and painted in two colors (RAL 7035 light gray / RAL 5004 dark blue). The dividing head is not in use and can be delivered immediately. Minor signs of wear from previous use are visible to a small extent. A single-use transport crate, with a total weight of 109 kg, has been prepared for transport. Chsdez Hyyfspfx Al Aoc A manual compiled from Deckel descriptions is also included in the scope of delivery.

Condition: used, Year of construction: 1987, FRIEDRICH DECKEL PRECISION MILLING MACHINE MODEL: FP4M YEAR: 1987 approx. HEIDENHAIN DIGITAL READ OUT CLEAN Codpszv Eg Sefx Al Aohc

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex-yard: Cjdsz Huzkjpfx Al Aehc CNC tool milling machine, Deckel Type FP 5 – 80 Year of manufacture 1995 CNC control: Dialog 12 Universal table: 750 x 520 mm Travel distances X / Y / Z: 800 / 550 / 500 mm Drive power: 9 kW Spindle quill stroke: 80 mm Electronic handwheel Spindle speeds: 32 – 5000 rpm Feed rates: 0 – 6000 mm/min Weight: 4.5 tons Price: Euro 2,500.00 (plus VAT), ex-yard.

Condition: good (used), functionality: fully functional, overall weight: 700 kg, For sale is a used Deckel FP1 milling machine in good working condition. The machine has feed in the X and Z axes. Travel ranges XYZ: 300x150x340mm Tool holder: SK40 S20x2 Chodpjz Aa Idefx Al Asc Spindle speeds: 40-2000 rpm Quill with 60mm stroke Ideal machine for toolmaking or prototype production. Already the new version of the FP1 with selector dials for speed and feed selection. Included: - High-quality hydraulic vise - Chip tray Milling cutters and tool holders can also be included upon request. Loading options (forklift) are available. Shipping is also possible upon agreement. Inspection under power and collection in 5023 Salzburg.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, spindle speed (max.): 2,000 rpm, spindle speed (min.): 80 rpm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, Universal milling machine Deckel FP1 – Very good condition For sale is a Deckel FP1 universal milling machine in very good, well-maintained condition. The machine is equipped with a 3-axis digital display Heidenhain TNC 113 and stepless feed in all three axes. The Deckel FP1 is known for its precision, reliability and durability and is ideal for toolmaking, single-part production, repair work and training companies. Chodszlnmmjpfx Al Asc Technical data Manufacturer: Deckel Model: FP1 Year of manufacture: 1985 Machine number: 15082 Spindle speed: 80–2,000 rpm Drive power: 1.6 / 2.0 kW Stepless feed in X, Y and Z axis Rapid traverse in all three axes Travel ranges (X/Y/Z): 300 / 160 / 340 mm Fixed angular table Vertical milling head on spindle head, adjustable by 100 mm Vertical and horizontal spindle with SK40 collet Clamping system: S20x2 Spindle brake Space requirement: 1.30 m x 1.10 m x 1.60 m (L x W x H) Machine weight: approx. 850 kg Equipment - 3-axis digital display Heidenhain TNC 113 - Hydraulic vise - Coolant system - Operating manual The machine is in very good technical and optical condition and is ready for immediate use. An inspection and a test run can be arranged at any time by appointment.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, DECKEL FP 4 MK Year of manufacture: 1992, with TNC 113 active digital control with positional programming Spindle speeds: 50 - 2500 rpm Travel ranges: X 500, Y 400, Z 400 Cjdpfx Aozxwz Tol Ajhc Feed rate: stepless + rapid traverse Hydraulic tool clamping system SK 40 Hydraulic machine vice Allmatic 125 Universal table Central lubrication, electric, lighting, machine feet, coolant system. Condition: original, not repainted Smooth and quiet operation at all spindle speeds Guideways and axis movements are in perfect condition. Weight approx. 1500 kg Can be inspected while powered on. Free loading D - 88433 Schemmerhofen

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Deckel FP 1 MK with TNC 123, year of manufacture 1994, with CE marking. Spindle speeds: 40 - 2000 rpm, SK 40. Travel distances: X 300, Y 160, Z 340. Stepless feed rate + rapid traverse in all axes. Weight: approx. 880 kg. Chjdozx Ep Sopfx Al Aec Accessories: Universal table, electric central lubrication system, coolant system, collet set, 5 tool holders, Röhm machine vise, swarf drawer. Condition: Original, not repainted, smooth operation at all spindle speeds and axis movements, and flawless guidance. Can be inspected while powered on. Free loading at D-88433 Schemmerhofen.

Condition: like new (used), functionality: fully functional, Tool milling machine Deckel FP 4 MK Type 2203 Equipped with a hydraulic tool clamping system and central lubrication. Chedjzvxlhspfx Al Ajc

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, For sale: a DECKEL FP1 milling machine with a comprehensive range of accessories and the original operating manual, in very good condition. Chedjzr E D Nspfx Al Aoc

Condition: good (used), – ISO40 – 50–2500 RPM – Table 600 × 220 mm – Automatic feed – Rapid traverse – Digital position display – Swiveling milling head – Protective cover – Emergency stop – Tool – Lighting – 400V Cjdpozxmc Tjfx Al Aohc

Condition: good (used), Year of construction: 1987, Mikron WF2SA machining center with a 3-axis Heidenhain Aktiv digital control system. Fixed angular table, SK 40 spindle mount. Ready for operation. Machine can be demonstrated under power by arrangement. Chedpfx Aozvyh Del Asc

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital display, Heidenhain active control, and continuously variable feed. Technical data: Codozrn Tyopfx Al Aehc >> Year of manufacture: 1982, Machine no. 2101-1995 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Continuously variable feed in 2 axes >> Rapid traverse in 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head, adjustable by 100mm on the spindle head >> Vertical quill and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Operating manual, parts list About the machine: Offered is a Deckel FP1 universal milling machine in very good original condition. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs smoothly. The FP1 was in a training workshop at a university and was used very little. This newer FP1 model has continuously variable feed in two axes, and the machine also has rapid traverse in these axes. A major advantage is the active 2-axis digital display. With this Heidenhain positioning control, you can enter dimensions that the machine will automatically approach. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital display makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: excellent (used), Deckel FP 4 MK Deckel FP 4 MK machining center with Heidenhain TNC 113 control, manufactured in 1990. Fully overhauled by FPS in 2021. Excellent condition, CE compliant!! The machine comes from the prototype construction department of Castwerk Technologies. Technical data: Year of manufacture: 1990 Fully overhauled by FPS in 2021 Digital display: 3-axis active digital display HEIDENHAIN TNC 113 Travel in X-axis: 500 mm Travel in Y-axis: 400 mm Travel in Z-axis: 400 mm Tool holder: SK 40 hydraulic tool clamping, DIN 2080 Milling head type: Vertical milling head Spindle speed range: 50 - 2,500 rpm, 18 steps Table type: Tilting table Table clamping surface: 800 x 490 mm T-slot size: 14 mm Csdpfx Alozy U E Eo Aohc Weight: approx. 1,450 kg Dimensions: approx. 2,500 x 2,700 x 2,100 mm Accessories and equipment: Heidenhain TNC 113 control Hydraulic clamping, vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating instructions for the control and programming examples Handwheels Coolant system About the machine: Offered is a Deckel FP 4 MK machining center with a Heidenhain TNC 113 control. This universal milling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Switching from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Deckel has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Deckel on site while it is powered on. You can find more milling machines from well-known manufacturers on our website.

Condition: used, Emco F3 universal milling machine from a vocational training workshop With axis digital readouts Includes accessories as shown in the picture X: 350 mm Y: 300 mm Z: 200 mm Table: 600 x 200 mm Rapid traverse rate X, Y axis: 1200 mm/min Spindle speeds: 80 – 2200 (8) rpm Quill travel: 45 mm #8498 Net price Chjdpeztwgfsfx Al Aoc

Condition: ready for operation (used), Deckel FP 2 NC Universal Milling Machine Universal Milling Machine TNC 320 / 321 Travel distances: x- 300mm | y- 300mm | z- 400mm Stepless spindle speed 31.5 - 5000 rpm Feed rates 2-4000 mm/min Rapid traverse 4000 mm/min Tool holder SK 40 Quill stroke 80 mm Machine weight 1350 kg You are welcome to arrange an inspection appointment. We can also organise affordable shipping for you! You will receive a proper invoice. For international customers, we can also provide a net invoice. The requirement is a valid VAT ID number. Subject to prior sale. Cjdpfexfkm Aex Al Aehc Visit our shop and take a look at our other offers. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Variations in technical data or errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), DECKEL FP 1 / 3 - Axis Active Digital TNC 113 -CE marking -Travel ranges X / Y / Z: 300x160x340mm -Heidenhain TNC 113 / Linear control -Spindle speed range: 40 - 2000 RPM -Feed rates continuously adjustable in all three axes -Rapid traverse in all three axes -Swiveling vertical head & drilling quill -Vertical & horizontal milling capability -Tool holder: ISO 40 -Drive power: 1.5 / 1.9 KW Csdpfxozvcbgj Al Aehc -Fixed angular table -Chip tray -Coolant system -Work light -Documentation Dimensions: L x W x H: 1.3 x 1.2 x 1.8 meters / Weight: 950 kg Errors and omissions excepted.

Condition: used, Various clamping tables/angle tables are continuously in stock. Cjdpfx Alsz Hpc No Ashc

Condition: good (used), Deckel FP1 milling machine with 3-axis Heidenhain digital display, fixed angular table, and SK 40 spindle mount. Accessories: counter supports, various collets. In good, operational condition. Can be demonstrated under power by arrangement. Chsdpezy Hnlsfx Al Asc

Condition: used, Macmon M 100 E – Universal milling machine -Travel ranges X / Y / Z: 310x340x170 mm -Spindle speed range: 50 - 2500 rpm -Automatic feeds and rapid traverses in all 3 axes -Tool holder: ISO 40 Chsdpezzymqsfx Al Asc -Swiveling vertical head -Tilting table: 600x220 mm -Total power consumption: 2.5 kW -Documentation Dimensions: L x W x H: 1.5 x 0.7 x 1.5 meters / Weight: 900 kg Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2201-5046, Good condition with various tool holders. SK40 - S20 Heidenhain active control Chsdpoy Al Tnsfx Al Asc Automatic feeds on all axes. 4th axis controlled.

Condition: good (used), functionality: fully functional, Internal article number: 26054 Universal milling machine Deckel FP1 + Heidenhain digital display Travel distances: X300 / Y160 / Z340 mm Spindle stroke: 60 mm Cedpfx Alozx T Ago Ashc Power consumption: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is running, in our heated warehouse covering an area of over 500 m².

Condition: ready for operation (used), Tool milling machine Deckel FP 2 / 3-axis digital display "NEW" / ORIGINAL CONDITION from a university -Travel ranges X/Y/Z 400x200x400mm -Table clamping surface 700x350mm -Speed range 40-2000 rpm -Feeds and rapid traverses in all three axes -Tool holder ISO 40 -Vertical / Horizontal milling attachment Chedpfx Aloztdl Is Ajc -Fixed swivel table -Coolant system -3-axis digital display "NEW" -Spindle nut X-axis "NEW" -Machine feet -Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1600 kg Errors and omissions excepted.

Condition: used, Copy Milling Machine DECKEL Model: KF 1 Chsdpfx Aez A Hmwel Aec Machine No.: 61510 Year of manufacture: 1981 Weight approx.: 1 t

Condition: used, functionality: fully functional, Travel range X: 300 mm Csdpozi Utbefx Al Aehc Travel range Y: 150 mm Travel range Z: 340 mm Spindle speed: 40 – 2000 rpm Feed rate in X & Z Tool holder: SK 40 with S 20 x 2 saw-tooth thread Table type: Angular table or swivel table Table clamping surface: 600 x 210 mm Weight: 800 kg Dimensions: approx. 1250 x 1200 x 1850 mm Paint finish: RAL6011, Reseda green Digital display: 3-axis digital display HEIDENHAIN Accessories: Additional accessories available upon request