Condition: good (used), Year of construction: 2010, Functionality: fully functional, Thermal combustor for air treatment of 15,000 m3/h purchased and never used. Dkebvrov D Uldo Hgrel

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 27 h, one machine directly available *Prior sale expressly reserved *Round silo at extra charge Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction Hydraulic briquetting press for rectangular briquettes Type R - throughput up to maximum 500 kg / h * depending on the specific weight of material. Based on a bulk weight of 220 kg / m³. + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics + 25 years of experience . * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material . Drive motor: 22 kW - IE 3 400 V / 50 Hz / 3 phases Oil cooler: 2.2 kW Agitator: 0.55 kW Screw: 1.5 kW . Hopper: 400x800mm Capacity of approx. 150 liters . Soft start for hydraulic motor Dksbvsgbpm Tsr Hgrjl Siemens PLC S7-1200 . Auto start and stop via a light barrier integrated in the feed hopper Up to 560 briquettes per hour . Specific pressing pressure: 1,700 kg / cm² Up to 300 bar pressing pressure Briquette format 150x60 mm Briquette length: 40 to 110 mm (adjustable) Dimensions: 2.9 x 2.0 x 2.1 m Weight: 3,800 kg. 600 liter hydraulic oil tank The control is designed for operation from + 10 degrees to +35 degrees . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - Installation temperature: temperature-controlled room at at least + 8 ° C Otherwise, we recommend heating for an extra charge - The loading must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear can be the result.

Condition: like new (used), Year of construction: 2023, operating hours: 1,300 h, Functionality: fully functional, machine/vehicle number: 0009, overall weight: 17,000 kg, total width: 2,485 mm, total length: 7,100 mm, total height: 2,720 mm, transport width: 2,485 mm, transport length: 7,100 mm, transport height: 2,720 mm, power: 216.24 kW (294.00 HP), year of last overhaul: 2024, rotor diameter: 650 mm, rotational speed (min.): 1,100 rpm, rotational speed (max.): 1,750 rpm, Equipment: rotational speed infinitely variable, IMPORTANT HIGHLIGHTS - Throughput capacity approx. 20 - 35 t/h * in the area of waste wood, pallets - Throughput varies depending on loading device and source material. - Grain size approx. from 0 - 300 mm *, variation possible (with proportionate oversize grain when starting up and running empty) - Diesel engine in accordance with the new EU emissions standard - User-friendly touch screen operation (multilingual possible) - Powerful transmission with approx. 260,000 Nm HPS 1.5 D Hydro Power Shredder 1.5 Diesel Machine specification Basic machine Hydro Power Shredder 1.5-D - installed on EU-NORM hook lift frame - with solid, stable shredding unit made of special steel - with diesel engine like. Scania-DC-9 294 kW - AdBlue tank approx. 60I - SCR catalytic converter system - Stage 5 emissions standard - Exhaust values according to EU regulations - Hydrostatic drive with power-regulated double pump system and hydraulic motors - Noise level reduction to approx. 86 dbA - Reinforced transmission to approx. 260,000 Nm - Weight without permanent magnet approx. 17.0 t Control system Switch & control cabinet & power cabinet - with modern multi-functional display - with connection and control via CAN bus - Monitoring and evaluation of operating parameters - with operation via touch screen - integrated GPS / FMS positioning system - for operating, controlling and monitoring - of all machine functions and operating parameters - 10-channel radio remote control with emergency stop function - with manual transmitter for touch screen operation Loading and discharge conveyor 3-part hopper - Feed hopper with a capacity of approx. 9 m3 - with 2nd tilting hopper for optimized material feed - Tipping hopper actuation via radio remote control Discharge belt - height-adjustable by radio - reversible in service mode - Foldable for transportation - Discharge height approx. 4,400 mm Dkebvsumamnsr Hgrol Permanent overbelt magnet installed across the discharge conveyor Paintwork Standard paint finish, 2 colors - Base frame RAI. 7016 anthracite gray - Machine parts RAL 6018 yellow-green Takeover of a financing contract possible

Condition: used, Year of construction: 2016, power: 7 kW (9.52 HP), For sale Pressstation STV1000 with container 30 m3! Technical data pressing station: Dkebjv Tm Atevr Hgrjl Pressing station - STV1000 Year of construction - 2016 Dimensions (length x height x width): 3360 x 1165 x 1561mm Pressing force: 300 kN Filling opening: 1180 x 1405 mm Power: 7.5 kW; CONTAINER: capacitat/volume - 30 m3 Year of construction - 2016 PRICE ON REQUEST!

Condition: used, Year of construction: 2006, Bale size 400x400 mm Force 1 Step 850 KN Force 2 Step 850 KN Force 3 Step 850 KN Steel < 8 to/h Aluminium < 4 kg/h Driving Power 50 KW Arrangement Surface 7,5 x 7,2 m x m Machine weight 29 to Press box aperture1,9 x 0,95 mxm Dksbvr Hgoltinwerel Place: Germany Available immediately

Condition: as good as new (ex-display), Infeed width: 720 mm Infeed height: 330 mm Dkobsgabfqovr Hgrsl Rotor diameter: 1,000 mm Rotor knives: 2 pcs Stator knife: 1 pc Infeed unit: 2 x 3 rollers Motor: 110 kW Machine weight: approx. 8,000 kg

Condition: used, Year of construction: 2019, Type - HKV Manufacturer - Ludden & Mennekes Dsbvr Hov Tmzcjgrjkl Year of manufacture - 2019 Fits 4-wheel MGBs with flat tops, and also 2-wheel 240-liter MGBs.

Condition: not inspected (used), Year of construction: 2005, Scraper conveyor: 5m Width: 0,55 m Height: 0,5m Dkjbed H Twijvr Hgrjl Inner width: 0,38m Carrier divide: 500mm Belt incline: 30° Drop height: 2,5m with swivelling slewing ring without engine

Condition: new, Exhibition machine Infeed width: 1,400 mm Infeed height: 550 mm Rotor diameter: 1,600 mm Rotor knives: 4 pcs Debsgabfbovr Hgrokl Stator knife: 1 pc, externally adjustable Infeed unit: 2 x 5 rollers Motor: 250-500 kW Machine weight: approx. 30,000 kg

Condition: used, Year of construction: 2015, Functionality: fully functional, Manufacturer: ATM Type: ArnoBrik 12 Year of construction: 2015 Briquette diameter: 125 mm Press cylinder force: 4,200 KN Capacity: Steel, cast iron: 2600-2900 kg/h Aluminum: 1000-1200 Kg/h Brass: 3200 kg/h Drive power: 3 x 37 kW Dkebvr Hoq D Acpegrel Installation area: 9 x 6.5 x 2.5 m Machine weight: 24 tons

Condition: excellent (used), Complete shredding and screening plant for the production of refuse derived fuels. Dobvr Hefbtyqogrekl Consisting of: Pre-shredder ZVZ 3000 Overband magnetic separator Disc separator ZENO ZSS Shredder ZTLL 2500x1900 Conveyor system

Condition: used, Year of construction: 1999, operating hours: 14,788 h, Functionality: fully functional, Briquette diameter: 105mm Force Main cylinder: 2900 KN Steel, Cast iron: 1600 kg/h Dksbslhqdmevr Hgrjl Aluminium: 700 kg/h Brass: 7 kg/h Driving Power 60 kW Arrangement Surface: 6x2,5 mxm Machine weight 9 to Place: Austria Available immediately

Condition: good (used), Intake opening: 1.000 x 1.200 mm Motor power: 37 kW Rotor flight circle: 450 mm Dkobvrebyiq Io Hgrel Rotor speed: approx. 86 rpm Cutting system: 51 cutting inserts Screen: quick-change-device, Ø 80mm Machine weight: approx. 3.500 kg

Condition: used, Year of construction: 2004, Force Presscylinder: 4000 KN Steel, Gush: 4-6 to/h Aluminium: 3-4 to/h Driving Power: 1x22 kW Arrangement Surface 7x4, 2x4, 1 mxm Machnie weight: 23 to Dobvr Helhqc Nsgrjkl Place: Austria Available immediately

Condition: new, ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU-Diesel motor, rotor flight circle Ø 575 mm, 2 x 12 cutting inserts on tool holder, show machine. Dkobvrsbg Engj Hgrsl

Condition: used, Inlet cross section: 1,600 x 1,200 mm drive power: 2 x 45 kW knife width: 55 mm Dkjbebq Sugevr Hgrsl number of knives: 56 pieces, screwed together rotor flight circle: 655 mm Planetary gear

Condition: used, inlet cross section: 2500 x 1700 mm Drive: 160 kW rotor flight circle: 670 mm Discharge of contaminants: hydraulically pre-stressed and openable flaps for discharge of contaminants rotor execution: 14 pcs. positive cutting plates 120x120x55 mm on tool holders counter knife: with cutting gap adjustment Feeding device: hydraulic hopper: 1.700 mm high, with revolving pipe line tube machine weight: approx. 24.000 kg Djbvr Hobq Su Negrskl

Condition: as good as new (ex-display), Intake opening: 2000 x 1900 mm Motor power: 2 x 75 kW Rotor flight circle: Ø 600 mm Dsbvecb Dttor Hgrekl Rotor speed: approx. 84 rpm Cutting system: 152 cutting inserts 40x40x20 mm on toolholders Screen perforation: with this Screen perforation is for achieving the security levels P2 to P5 Counter knife: with cutting gap adjustment Machine weight: approx. 21.000 kg Machine number: A 32

Condition: used, Intake opening: 1.200 x 1.600 mm Djbvr Hjbq Stqegrekl Motor power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5.900 kg

Condition: used, Inlet cross section: 420 x 750 mm drive: 11 kW rotor flight circle: 250 mm rotor speed: approx. 140 rpm Rotor design: 10 single teeth Screen design: solid screen basket, reinforced with ribs hopper: 1.050 mm high, without lid Debvr Hgebpgu Hjrokl Suction nozzle: 200 mm diameter, at the front machine weight: approx. 900 kg

Condition: as good as new (ex-display), Intake opening: 1200 x 1600 mm Motor power: 55 kW Rotor flight circle: Ø 600 mm Rotor speed: approx. 84 rpm Cutting system: 56 cutting inserts 60x60x30 mm on toolholders Dkebvrjcbnigo Hgrol Screen perforation: Ø 40 mm Counter knife: with cutting gap adjustment Machine weight: approx. 7.000 kg Machine number: A 21

Condition: as good as new (ex-display), Intake opening: 1200 x 1600 mm Motor power: 90 k W Rotor flight circle: Ø 600 mm Dkjbvecbnu Rjr Hgrol Rotor speed: approx. 75 rpm Cutting system: 42 cutting inserts 60x60x30 mm on toolholders Screen: with quick-change-device Counter knife: with cutting gap adjustment Gearbox: with torque monitoring Product discharge with swivel-mounted conveyor TKF 400x5000 Machine weight: approx. 13.400 kg Machine number: A 2

Condition: used, Intake opening: 800 x 1000 mm Dkebvrocayzqj Hgrjl Motor power: 18,5 kW Rotor flight circle: 300 mm Rotor speed: approx. 140 rpm Cutting system: cutting inserts Screen: reinforced with ribs Connecting piece: sideway Machine weight: approx. 1.950 kg Machine number: A 33

Condition: used, Hopper opening 2.500 x 2.000 mm Rotors: 2 pcs. Rotor flight circle: 470 mm Rotor design: 2 x 22 single teeth Engine: Mercedes Benz 6 cylinder, 260 kW/2300 rpm Hopper end: with reinforced Pipe-Line frame Dksbsbq Svijvr Hgrel discharge conveyor: hydraulically foldable length: approx. 8.000 mm Width: 1.400 mm 1 permanent magnet - tape roll for belt width 1.400 mm The machine is mounted on a container base frame. machine weight: approx. 21.000 kg

Condition: new, Hopper opening: 2.500 x 2.000 mm Rotors: 2 pcs. Dkebvrebq St Hs Hgrsl Rotor flight circle: 580 mm each Rotor design: 5 and 6 cutting teeth Drive: 2 x 90 kW with planetary gears Hydraulic screen flap interlock for the discharge of contaminants Weight: approx. 18.500 kg