Used welding sets for sale (315)

Condition: excellent (used), Year of construction: 2013, operating hours: 11,556 h, functionality: fully functional, type of cooling: water, laser power: 500 W, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, LASER welding unit - AL 500 CWS Average power 500 W Emergency stop switch on the resonator CWS laser power supply Pulse peak power 17 kW Pulse frequency 0-100 Hz Incl. deflection flange 3 x 400 V, 50-60 Hz, 3 x 32 A ALFlak motion system Travel range (X, Y, Z) 340 × 330 × 370 mm Equipment: Ergokeil 5°-25° Ergonomic wedge for microscope Tilting/swiveling optics AL500 LED-UW HP Focusing objective f=120, ultra-white diode ring light Protective glass swivel joint ALFlak X, Y and Z can be locked independently Eyepiece 16x magnification Rotating axis module ALFlak with chuck ø 125 mm / internal ø 24 mm Tiltable for horizontal to vertical rotation. Gjdjz Eu Syepfx Akhekd

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, type of input current: AC, input voltage: 230 V, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 170 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 230 A, input frequency: 50 Hz, Equipment: documentation/manual, EWM Tetrix XQ 230 puls AC/DC Expert 3.0 – Industrial TIG welding system with water cooling, extensive accessories, and a transport cart For sale is an EWM Tetrix XQ 230 puls AC/DC Expert 3.0 TIG welding system from the current generation of devices, featuring a large 7-inch graphic display, comprehensive Expert 3.0 control, and active water cooling. The system was purchased in 2023 and has been used very little due to a change in the intended application. The operating time is verifiably less than 50 hours. Consequently, the device is in near-new condition, both visually and technically. No dents, scratches, or other signs of wear. The excellent condition can be seen in the pictures. Additional pictures can be provided upon request. The welding system is sold with a comprehensively equipped complete set, which provides high-quality equipment for professional TIG welding in an industrial environment and enables immediate use. Scope of delivery: - Welding system: EWM Tetrix XQ 230 puls AC/DC Expert 3.0 with 7-inch graphic display (fully digital control, details see manufacturer's website) - Cooling module: EWM Cool XQ 40 for water-cooled welding - Transport cart for the welding system and gas cylinder - Water-cooled TIG torch, 4 m length, suitable for the Tetrix XQ system - Foot control for precise control of the welding current, particularly advantageous for aluminum welding - Comprehensive TIG accessory package, including various gas nozzles (shape and diameter), collets, tungsten electrodes in different diameters and designs, as well as gas lenses and other wear parts (see detailed pictures - the photos are of the product being sold). Most of the accessories are new or unused. - Transport case for storing the accessories - Several pairs of leather gloves, size 8 - Ground cable - Gas hose - Gas pressure regulator - Operating instructions A first-class equipped TIG welding system for demanding applications, where condition, low operating hours, and extensive accessories are convincing. Ideal for professional users looking for a high-quality EWM system without having to compromise on a comprehensive accessory package. Note: Not all components of the scope of delivery are shown in the pictures. The sale includes all components listed above. Gkedpo Aicx Defx Akhed

Condition: like new (used), Year of construction: 2021, operating hours: 3,006 h, functionality: fully functional, machine/vehicle number: 00161215-02.18, type of input current: three-phase, total height: 1,150 mm, total width: 1,200 mm, total length: 1,030 mm, input voltage: 400 V, overall weight: 910 kg, type of cooling: water, electrical fuse: 16 A, laser power: 900 W, input frequency: 50 Hz, laser wavelength: 1,070 nm, travel distance X-axis: 320 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 370 mm, Equipment: head guard, We are selling a laser welding machine in excellent condition. Gjdpfx Aszw Eu Sskhskd

Condition: used, functionality: fully functional, SAF Plasmatome 20 with Digisaf 100 control system. The machine is suitable for plasma cutting of sheet metal and is in used condition. The system is equipped with a CNC Digisaf 100 control system. Gkods Ahw Dujpfx Akhod Inspection and testing are possible by appointment. Sale as shown in the photos.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, ESAB Alpharex AXD 5 axis Gantry Laser- 5KW Trumpf Resonator- Year 2007. 26 metres x 5900mm Table. Bevel cutting. Max 25mm Thickness. Gsdpezc Nzuofx Akhjkd

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, warranty duration: 12 months, type of cooling: water, sheet thickness aluminum (max.): 10 mm, laser power: 3,000 W, sheet thickness (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 10 mm, degree of automation: automatic, sheet thickness stainless steel (max.): 10 mm, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, Laser Welding Machine - BWT 3000W Water-cooled Nitrogen Generator - 80W N2-T1 Gksdpfx Ae Aic Ilskhsd 4 in 1 Suvirinimo komplektas + Azoto generatorius

Condition: used, functionality: limited functionality, 3 x OTC robots including manipulator sets Dr-4200L (not functional) 2 x FD-V6L (functional up until the time of disassembly/storage) Gsdpfxsz Ipc Eo Akhekd 4 x welding units CPVAS350 3 x manipulators All items are offered as a single set. The equipment is packed and stored in a warehouse.

Condition: used, functionality: fully functional, type of cooling: water, Equipment: documentation/manual, type plate available, The welding machine includes a Cool Midi 1800 cooling unit and a TA 24 control panel, complete with cables. It is fully functional and can be tested at our warehouse in Přerov. Gedpfx Ake Ah S H Hohjkd

Condition: good (used), Year of construction: 2023, functionality: fully functional, laser power: 1,200 W, Laser welding machine MaxPhotonics MA1-45, manufactured in 2023, with wire feeder, handheld laser gun with 5-meter cable, ground wire for safety with 5-meter cable, basic assortment of nozzles (for various applications), 1 Protect Starlight safety glasses, nitrogen pressure regulator, with wobble function, deflection 0-4mm, suitable for structural steel, aluminum, and stainless steel. Up to 4mm thickness. Interface for external safety components. The machine is fully functional. Gedpjz D Dwcefx Akhekd

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 82397, type of input current: three-phase, welding current (max.): 420 A, Equipment: type plate available, MERKLE Insquare W 421 AC/DC water-cooled TIG welding system Manufacturer: MERKLE Model: Insquare W 421 AC/DC Year of manufacture: 2012 Serial number: 82397 Description For sale is a powerful AC/DC TIG welding system from MERKLE with water cooling. This system is suitable for professional welding applications on steel, stainless steel, aluminum, and other non-ferrous metals. The AC/DC technology allows for both DC and AC welding, covering a wide range of applications. With a welding current of up to 420 A, the system is ideal for industrial use in metal, tank, plant, and pipeline construction. The water cooling ensures continuous and reliable operation, even at high welding currents. Technical data Gedpfx Ajzamffokhjkd Manufacturer: MERKLE Type: Insquare W 421 AC/DC Year of manufacture: 2012 Welding current range: 5 – 420 A AC frequency: 50 – 200 Hz Open-circuit voltage: 80 V Mains connection: 400 / 415 V, 50 / 60 Hz, 3~ Duty cycle at 40 °C: 420 A at 40 % 360 A at 60 % 310 A at 100 % Protection class: IP23 Water cooling Standard: EN 60974-1 Scope of delivery MERKLE Insquare W 421 AC/DC Water cooling TIG torch Ground cable Foot pedal All information is subject to change without notice.

Condition: like new (used), Year of construction: 2012, operating hours: 90 h, functionality: fully functional, type of input current: three-phase, total height: 1,100 mm, total width: 500 mm, total length: 1,200 mm, overall weight: 60 kg, Offer little used welding set Orbital welding of pipes on site (with or without oscillation, depending on pipe thickness) with assembly! Pipe diameter from 25–115 mm Pipe thickness from 1–8 mm Inside includes a pipe cutter, welding arm, remote control, equipment with cooling system everything you see in the pictures. Length x width x height 1200 × 500 × 1100 Gjdpfx Asv Di S Ejkhjkd

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, overall weight: 100 kg, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, type of cooling: water, input current: 16 A, laser power: 300 W, input frequency: 50 Hz, laser wavelength: 1,064 nm, travel distance X-axis: 120 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 800 mm, continuous power: 9 kW (12.24 HP), Equipment: type plate available, We are selling a like-new ALM300. It underwent a complete service in September 2026 and a new laser unit, including a flash lamp, was installed. The price was €12,500.00 excluding VAT. Includes special equipment: Tilting-swiveling objective, LED-UW Ergonomic wedge, 5-25 degrees Aluminum light case Camera set ALFT-HDMI Optional, if required: Laser protection curtain, 2x 4300x2100mm, €3,000.00 Extraction and filter system LN 260 ZA-W3, €3,000.00 (filter in like-new condition) Laser safety glasses, 2x, €500.00 New price: €130,000.00 Gsdezyzwnopfx Akhokd

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling unit and accessories For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully-fledged workshop device and shines with state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling unit Condition: very good, fully functional Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. 8-meter hose package • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 are carried out directly via the rear of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for rough use in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) Gkodpfx Asyxvwijkhod _____ The device is in a ready-to-use condition. Inspection and test run are possible by arrangement.

Condition: used, Year of construction: 2018, Bolt welding power source Manufacturer: Soyer Type: BMH 22i (inverter power source) Year of manufacture: 2018 Maximum welding current: 2,000 A Gkedpfe Ahhf Uox Akhed Welding cycle: Ø6/30, Ø22/3 bolts/min. Open-circuit voltage: 75 V Protection class/cooling type: IP 21 / F Connection: 3-phase 400 V / 63A 50/60Hz Electrical continuous current: 2A / phase Electrical continuous power: 1,400 VA Electrical peak current: 180A / phase Included: Welding gun Ground cable 121126ä

Condition: like new (used), Year of construction: 2021, functionality: fully functional, type of cooling: water, CoWelder with Universal Robots UR10 – Migatronic Pi 350 AC/DC We are offering for sale a CoWelder robotic welding system with Universal Robots UR10, complete with Migatronic welding equipment. The system was purchased in 2021 and has been used in production, but only to a limited extent. It is in good condition and available for immediate sale. Gjdpjz D Uufjfx Akhjkd Equipment included: CoWelder robotic welding system Universal Robots UR10 collaborative robot Migatronic Pi 350 AC/DC welding power source Cold Wire Feeder (CWF) Water-cooled welding torch The system is suitable for automated and repetitive welding applications and can be used for a wide range of welding tasks. Technical information: Manufacturer: Migatronic / Universal Robots Model: CoWelder / UR10 Robot: Universal Robots UR10 Welding power source: Migatronic Pi 350 AC/DC Cold Wire Feeder: CWF Water-cooled welding torch Year of purchase: 2021 Condition: Used, good condition The welding/work table is not included in the sale. The equipment can be inspected by prior arrangement. Price: EUR 34,900 net + VAT The equipment is sold as a complete set.

Condition: excellent (used), The ESAB Origo MIG C340 PRO 4WD is a powerful and reliable MIG/MAG welding machine for professional use. Thanks to its maximum output of 340 amps and the 4-roll drive system for the wire feeder (4WD), this machine offers an extremely stable and consistent wire feed. Gkjdpfx Aks Ai Hq Sjhsd This ensures a uniform weld bead and optimal control, even with longer welding cables and intensive applications. The robust machine is particularly suitable for structural work, workshops, and industrial environments where continuity and quality are essential. Suitable for welding steel.

Condition: new, Year of construction: 2020, functionality: fully functional, type of cooling: water, laser power: 350 W, Equipment: documentation/manual, type plate available, New AC/DC Pulse welder with CWF wire feeder, previously on display in the showroom. Gjdpfx Akszu Tv Ejhskd

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, type of input current: AC, total height: 1,300 mm, total width: 600 mm, total length: 1,100 mm, input voltage: 230 V, overall weight: 150 kg, type of cooling: water, electrical fuse: 32 A, space requirement height: 1,300 mm, space requirement length: 1,500 mm, laser power: 200 W, input frequency: 50 Hz, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, Laser welding machine with 200 watts of laser power - Programmable spot diameter - Motorized focus adjustment - Includes rotary axis with three-jaw chuck - Machine (year of manufacture 2025) from our showroom with minimal operating hours - Lamp-pumped YAG laser - Spot welding machine for the finest welding tasks - For jewelry, optics, precision engineering, etc. - Welding spot from 0.1 to 3 mm Gjdoz Hwzmopfx Akhjkd - For practically all metals (steel, stainless steel, silver, gold, titanium, etc.) - Includes optical microscope (10x) - Additional CCD microscope with crosshair - Current, pulse width, repetition rate, and frequency adjustable on the control panel - Includes protective gas connection - Nd3+:YAG laser (metal cavity with xenon flash lamp) - Lamp-pumped Nd:YAG laser with 200 watts of power - External cooling - Power connection 230 volts / 32 amps - German menu Machine dimensions approx.: Width: 60 cm, Height: 120 cm, Depth: 110 cm, Weight: approx. 150 kg

Condition: excellent (used), Year of construction: 2022, operating hours: 80 h, functionality: fully functional, machine/vehicle number: 136088, Equipment: type plate available, MERKLE OptiMIG 351 KW | SET149942 | 350 A | TRANSFORMER | TOP CONDITION For sale is a high-quality, professional MIG/MAG welding system from the German manufacturer MERKLE. The system was purchased new in June 2023 and used only until February 2024. Overall, it has seen very little use, resulting in an exceptionally well-maintained condition. NO INVERTER – classic, robust transformer/rectifier technology! Ideal for professional metalworking companies, workshops, and industrial welding applications. TECHNICAL DATA • Manufacturer: Merkle Schweißtechnik, Germany • Model: OptiMIG 351 KW • Original set number: SET149942 • Year of manufacture: 2022 • First purchase: June 2023 • Process: MIG/MAG • Welding current: 25–350 A • Duty cycle: 350 A at 60%, 300 A at 100% • Mains connection: 400 V, three-phase • Classic transformer/rectifier technology • Water-cooled welding torch • Integrated 4-roller wire feeder • Digital display • Compact, mobile industrial design SCOPE OF DELIVERY • Merkle OptiMIG 351 KW • Original Merkle welding torch SBT 504 W, 3 m, water-cooled • Integrated water cooling system • Harris gas regulator with two manometers • Welding wire spool with remaining wire • Existing connection cables and accessories as shown in the photos SPECIAL FEATURES • Quality product Made in Germany • Classic, proven transformer technology instead of an inverter • Used for only about nine months, very few operating hours • Exceptionally well-maintained condition • Powerful 350 A industrial system Gjdpfxet A I Rte Akhskd • Merkle OptiMIG 351 KW is now sold out in the manufacturer's shop • Original welding package with water-cooled torch • The new price of the model was last listed at Merkle at €6,019 including VAT. Commercial sale from the business assets of a machine trading company. Proper invoice with VAT shown. Collection possible by appointment. Shipping via freight forwarder on a pallet is possible for an extra charge and with the costs borne by the buyer. Inspection possible by appointment. High-quality German industrial welding technology in exceptionally well-maintained condition. Particularly interesting for buyers who are specifically looking for a robust, classic transformer welding system.

Condition: good (used), Year of construction: 2012, machine/vehicle number: 222262, Offer 26269 Gkedj Ah Eqzjpfx Akhod Technical specifications: - Welding current: max. 400 A, 52% duty cycle - Welding current: max. 290 A, 100% duty cycle - Adjustable welding current - in 2 coarse steps and 10 fine steps from 30 A to 400 A - Digital voltage and amperage display - 4-roller wire feed, continuously adjustable - Control unit M 101 for: - Two-stroke/four-stroke regulation - Interval welding - Spot welding - Continuously adjustable creep speed and wire burn-back time - Hose pack approx. 4 m - Ground cable - Pressure reducer - Connection: 400 V - Space requirement: approx. W 650 x H 1100 x D 1100 mm - Weight: approx. 180 kg

Condition: like new (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: U1060515116, Equipment: type plate available, Lincoln Electric Precision TIG 375 – TIG welding unit with water cooling (TEC ARC TC2000) For sale is a high-performance TIG welding unit, model Lincoln Electric Precision TIG 375, ideal for demanding welding applications in industrial environments. Technical highlights: - AC/DC TIG welding (ideal for steel, stainless steel, and aluminum) - Maximum welding current: up to 375 A - Mains voltage: 230 / 400 V - Frequency: 50/60 Hz - High-frequency ignition (HF) - Pulse function and extensive adjustment options - Foot pedal connection available Equipment: - Integrated TEC ARC TC2000 water cooling - Hose package / torch included - Robust chassis with casters - User-friendly control panel with precise regulation Condition: - Used, fully functional - Normal signs of use (see pictures) - Ready for immediate operation Gkjdsy A Sgnspfx Akhod Special features: - Highly reliable industrial equipment from Lincoln Electric - Perfectly suited for workshops, metal construction, and production - High duty cycle for continuous operation Scope of delivery: - Welding machine - Cooling unit (water cooling) - Torch / hose package - Power cable If you are interested or have any questions, feel free to contact us. Viewing and test run possible by appointment.

Condition: used, Emhart TUCKER ETF50R.00.54/12.5.13-25BM Bolt Welding Machine Technical Details: - Manufacturer: Emhart Teknologies (TUCKER GmbH) - Model / Type: ETF50R.00.54/12.5.13-25BM - Article Number: T045 006/400 - Voltage: 400 V, 50/60 Hz - Made in Germany Condition: Used (see pictures). Note: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Gkedpfx Aoxl Aguokhjd You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2025, functionality: fully functional, On behalf of our client, we are selling a laser welding machine from JASIC. Jasic handheld laser welding machine, 2000 watts, with wire feed Model LS-20000F Fully functional, demonstration model with invoice Gkjdpfx Akjzv Uvcjhjd Location: 20537 Hamburg

Condition: used, Year of construction: 2007, operating hours: 42,000 h, functionality: fully functional, 2 identical systems consisting of: 1 cloos welding robot romat 350 incl. control unit, teach pendant incl. cable Connection cable between control unit and robot Gasnozzle sensing, seam tracking, point editor, CTMS, Manax C bow construction for robot in a fixed position Cloos welding machine MC 3 353 ( 350 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning Gkodpfx Akjw R T Twjhsd 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: on request . Subject to prior sale. Both systems together will be offered for a special price !!

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, type of cooling: water, hose package length: 5,000 mm, laser power: 1,500 W, Equipment: type plate available, Hello, dear machine enthusiasts, hello, dear welding enthusiasts! Today, we have another great offer from FOMATEC: We are offering an exhibition machine – the LAWELCO Laser 1502 laser welding machine. Gedpfx Aksz Ihk Uohokd Our offer includes: - Laser welding machine with 1,500 watts of power, water-cooled - Double-wire feeder - The welding machine can be operated with or without a single or double wire - Two laser welding safety goggles - A set of spare parts - Various welding nozzles If you pick it up yourself, you will also receive free instruction and training, or, if we send it to you, online training on the machine from our team. If you wish, you can also purchase a matching laser welding helmet. We look forward to hearing from you! Your FOMATEC team