Condition: used, Year of construction: 2008, functionality: fully functional, 90° welding and possibility of welding angles from 40° through 180° Limitation of standard welding seal thickness (2mm.) (1 mm upon request). Reduction of welded profile length 3 mm. For each welded profile side. Automatic temperature control of the fusion plate. Automatic control of fusion times. Automatic control of welding times. Csdpfxexytpco Aflshf Adjustment of fusion pressure. Integral protection of working area, fusion plate and locking cylinders. Working cycle and other functions controlled by an electronic card (DCS) Profile supports for quick change-over of counter forms. Device for quick change-over of profile positioning blade. Time-controlled working cycle . Working cycle with possibility to repeat the profile locking, in case of wrong positioning Profile supporting arms.

Condition: as good as new (ex-display), Year of construction: 2024, Pneumatic Glazing Bead Saw Type GLSP-200N-AV Pneumatic Automatic saw feeding Pneumatic work piece clamping Adjustable table height 2 x 45° motors Accessories: HM Saw blade 200 x 2.2 x 32mm HSS Saw blade 103 x 2.0 x 32mm Z=60/45° Right HSS Saw blades 103 x 2.0 x 32mm Z=60/45° Left Codpfx Ajuydgsflehf Glazing Bead Simulation- System With feed cylinder, 1 Revolver stop with 16 stops and 4 clamping cylinders Fixtures for 2 Glazing Beads, support And leg adjustable for simulation Exhaust support D=80mm

Condition: used, Year of construction: 2001, functionality: fully functional, Year: 2001 - technically efficient, ready to work (directly from the client) - corner cleaning machine SV 494 CNC Chsdpjtr Dukefx Aflsf - for-head welding machine AKS 6110 - turning station - cooling station - flash limitation: 0.2 - 2 mm

Condition: new, Year of construction: 2025, Semiautomatic milling machine with four electrospindles for water slot MLA WS42 EVO, new Csdpjwqlmdofx Aflshf

Condition: used, Year of construction: 1992, machine/vehicle number: 293784, Drill spindles: 8 Chjdpfx Afjbnnyboljf Drill spindle rotation direction: 4 right and 4 left Drill spindle speeds: 2800 rpm Shaft mount: 10 and 11 mm Drill stroke: 100 mm Drive motor: 380 V, 1.1 kW Table height above floor: 840 mm Space required: approx. 650 x 400 x 1700 mm Weight: 120 kg

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, Four-head welding machine URBAN AKS 6410-35/25, with weld bead limitation 0.2 mm with stainless steel knife, maximum welding dimension 3,500 x 2,500 mm, WINDFOWS control, parallel feed system, feed direction from left to right. Csdpfxexl Ud Es Aflshf

Condition: used, Year of construction: 2004, Automatic corner cleaning machine ROTOX EPA 274, designed for external corner cleaning with a 2.2 kW 400V AC motor. 40 mm cutter shaft diameter, 4 cutter positions (shaft length 330 mm, double clamping), 2 horizontal seam removal knives, pneumatic clamping. Operations are controlled by a programmable controller, which allows the operation times to be shortened to the most optimal value. Pressure regulator with air filter and pressure gauge. Width of the processed profile 140 mm, height 90 mm (200 mm). Weight 300 kg. Cedoxytmzopfx Aflshf

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, year of last overhaul: 2025, Complete production line for plastic windows (Rehau profiles) The plant remains operational and can be inspected while in use on site until December 2025. From December onwards, it will be available for dismantling. The automatic 4-head welding machine with corner cleaner can also be purchased separately – or together with the entire production line. The line is fully equipped and immediately ready for operation – ideal for the direct manufacture of plastic windows. All machines are in excellent condition. Cutting / Preparation: • SD25 Cross-cut saw • RU-VGPA3 • Macc metal saw • Wegoma V6/S water slot milling machine • Wegoma GL142P glazing bead saw • Wegoma AFK125 counter milling machine • Wegoma SK212 olive drill automation • Profile cutting trolleys (2 units) Welding & Processing: • Urban AK86250-35/25 – 4-head welding machine • SL2V double-head welding machine • Welding jaws incl. trolley • Urban SY530B corner cleaning machine with drilling unit • Wegoma SBA 1TS screw automation • Powerseat automatic screwdrivers (2 units) • KFM Urban copy router Extraction & Compressed Air: • Elektra Beckum SPA1000 extraction unit • Leoy Somer extraction unit • Kaeser SK 21 compressor • Schneider compressed air tank • Schneider air dryer Conveying Equipment & Storage: • Transport trolleys (7 units) Chsdpfx Aexg Al Toflef • Cantilever racking (3 units) • Ruchser stop table • Gasket roll-off trolley • Side table at cleaning machine • Rack with rollers • Vertical stop table (2 units) • Horizontal stop table • Fittings rack with template • Heavy-duty rack (1 unit) Additional Equipment: • Manual squeegee tool • MD/230V swinging crane with suction lifter Software: • ProLogic software incl. 1 PC

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Year: 2007 - technically efficient, ready to work – after full service Csdpexgqvtefx Aflshf - SV 530 cleaning machine - AKS 1610 welding machine - TBA-F 26/25 cooling station - WT 530 turning station - Welding dimensions: 2300 x 3500 mm - Flash limit: 0.2 – 2 mm - Seal formers

Year of construction: 2002, condition: good (used), Single-head welding machine URBAN AKS 1105, year 2002. Condition: very good Codpfx Aemqivwjfljhf

Condition: used, Year of construction: 2006, functionality: fully functional, Stabbearbeitungszentrum by STB-Graff, fully functional with integrated screwdriver for fastening steel reinforcements, for processing water drainage slots, handle holes in steel, lock cases, cylinders, door lock processing, etc. Chsdpfx Asw A Ax Isflsf

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, STOCK MACHINE: Working direction from left to right – Subject to prior sale – HECHT Exenso Profi Saw Cutting Center ESA-9 Comprising: Infeed: - Robust aluminum construction in proven profile design - Ergonomically adjustable working height from 985 – 1055 mm - Raw bar length from min. 400 mm up to max. 6,000 mm (optional extension kit available for up to 6,500 mm) - Material supply via chain conveyor for fully automated 9-compartment loading - Working direction from left to right Professional Cutting Saw: - Automatic bandsaw with pneumatic clamping system, consisting of 3 clamping elements - Infinitely variable saw feed via hydraulic unit - Workflow controlled via Exenso control system - The sawing area is secured at the front by a light curtain. - Bandsaw drive: 1.5 kW, frequency-controlled - Bandsaw dimensions: HBS 250 G 3320 x 27 x 0.9 mm, long service life - Cutting speed: in regulated operation 15-110 m/min Chsdpfx Afexft I Aelof - Cutting range: width 10-120 mm, height 10-80 mm Outfeed: - Robust aluminum construction in proven profile design - Ergonomic removal height from 760 – 820 mm (Note: not adjustable independently from working height) - Part outfeed via powered roller conveyor with steel rollers - Roller-guided ejection unit across three levels onto inclined discharge table - Maximum part length via automatic outfeed: 3,500 mm (optional extension kit available for working length up to 4,500 mm) - Scrap disposal via ejection unit – max. length 600 mm - Scrap pieces discharge via chute into customer-provided waste container (Note: waste container not included) - Remnant identification indicated at placement position for manual collection by operator Software / Data Interface: - HECHT Exenso ESA software (version specified after joint pre-acceptance) Operation: - Reinforcement bars are loaded onto the feed magazine in the infeed section by the operator according to specifications/display. - Transmission of the required cut lengths for the PVC cutting center from customer’s window manufacturing software via integrated data interface - Steel is automatically conveyed and fed - Optimized cutting to the specified lengths - Transport of steel to the pick-up position in the outfeed section - Optionally, double cuts can be made upon inspection Scope of delivery: - Bandsaw - Infeed conveyor - Outfeed conveyor - Light curtain - Control system with Win 10 and 15" touch screen - Data interface REST API can be adapted to an existing cutting center after inspection - The system is disassembled into several packages for transport Includes: 540.1082 1x Guard fence wall connection set with door switch ESA/SSA, usable right or left; 723.5011 1x bandsaw blade M42 3320x27x0.9 12-16 TPI, fine; 942.5541 1x minimum quantity lubrication for ESA & SSA saw systems – significantly extends bandsaw blade service life; Includes: minimum-quantity lube nozzle, 1L lubricant, holder for lubricant, filter for protection against contamination; 829.0201 1x additional buffer monitor for steel terminal ESA/SSA, additional display.

Year of construction: 2002, condition: good (used), functionality: fully functional, Single head PVCu window welding machines. Excellent condition, Easy to use fully ready for work. Power supply 230V. The welding angle of the product is changed from 30 ° -180 °. Chsdpfx Aerkm Sgeflsf

Condition: used, Window rubber, cutting machine, gasket cutter -Stops: 2 -Dimensions: 2500/600/H1000 mm -Weight: 15 kg Chsdpfx Afob A Ncgolsf

Condition: excellent (used), Year of construction: 2007, Year: 2007 - technically efficient, ready to work - after full service - flow limitation: 0,2 -2 mm Chodpfx Afoxqdy Tolsf - support arms - PLC driver

Year of construction: 1992, condition: used, Double-head saw ELUMATEC Codjpcgz Dopfx Aflohf - model DG 142 - year 1992 - blades 500 mm

Condition: good (used), Year of construction: 2004, functionality: fully functional, total length: 11,500 mm, total width: 3,800 mm, total height: 2,500 mm, Soenen Hendrik DEM 3 machining centre, year of manufacture 2003-2004, equipped with tooling for processing water drainage slots and ventilation in PVC profiles, including screwing and drilling handle inserts in steel. The machine consists of a loading table with a magazine for 12 profiles, a machining unit, and an outfeed table with a magazine for 12 profiles. The machine is in good condition, has been dismantled, and is currently stored in our warehouse. A video of the system was recorded prior to dismantling and can be viewed upon request. The machine is programmed for Kömmerling 76mm AD and MD profiles; other profiles can be programmed on request. The price includes dismantling and loading onto a truck. Codpfx Aferztl Solohf

Condition: used, Year of construction: 1990, cutting diameter 500 mm cutting length 5000 mm saw blade diameter 420 - 500 mm dimensions ca.6400 x 1500 x 1600 mm weight ca. 1600 kg feed stufenlos Motorized length adjustment with digital display manual and spare part list included Cedov U Dluspfx Aflohf

Condition: used, Forming area max. (length,width) / mm max. depth of product positive / mm Chsdpjwgi Siofx Aflof max. depth of product negative / mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.

Condition: used, Window rubber, cutting machine, seal cutter, pneumatic slat cutter, cutting device, pneumatic cutting device, pneumatic press -Manufacturer: Benzing, pneumatic cutting device -Stroke: adjustable, max. 70 mm Codpfjtpyqqjx Aflehf -Individual components: see photos -Dimensions: 150/130/H450 mm -Weight: 9.3 kg

Condition: excellent (used), Year of construction: 2007, Year: 2007 Cjdpfx Aoxx Rtcofljhf - technically efficient, ready to work – after full service - disc cutter: 250 mm - 4 CNC axes - working height: 200 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/outfeed table

Condition: good (used), Year of construction: 2009, functionality: fully functional, Cutting and machining center for PVC frame profiles and mullion profiles. The machine consists of a loading magazine, saw module, G-module for PVC processing, cross table for manual insertion of steel reinforcements, screwing module with an automatic underscrewdriver, drilling module for dowel holes, longitudinal saw for mullion profiles, and outfeed table with hand screwdriver for the strike plates. Cjdpfx Afjxbdnrjlohf Available end of September 2025.

Year of construction: 2004, condition: used, cutting range 90°: 90 mm cutting range 45°: 75 mm Saw blade diameter 315 mm Table dimensions 800 x 500/400 mm Saw blade 30 mm machine weight ab. 45 kg dimensions 850 x 600 x 430 mm Csdsd Ih Nkjpfx Aflshf

Condition: used, Single head fighter, welding machine, single head welding machine, fighter welding machine, butt welding machine Csdpfsb A Ivmox Afljhf -Tension: pneumatic -Weight: 270 kg

Condition: used, Window rubber, cutting machine, gasket cutter, pneumatic lamellar cutter, blind cutting device -Lamellar cutter: for PVC and aluminum blinds, pneumatic Codpfsf Sgwnex Afljhf -Manufacturer of pneumatic components: Festo -Dimensions: 680/340/H470 mm -Weight: 55 kg