Brootspers workshop press

AYEL-TECH WPBX 10

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Frequency: 60 rpm Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ncedpfsgpxc Sex Afasn Ram adjustement: 100mm Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Motor power: 22 kW equipped by: - 1pc. con rod - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet

Condition: ready for operation (used), Year of construction: 2001, operating hours: 19,853 h, functionality: fully functional, machine/vehicle number: 11170000963, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis simultaneous Speed 18000 Tool changer 60 pieces / SK 40 DIN69871 Tools included in the price Nedpfewqp Huox Afascn ICS / air blast Heidenhain 426/430

Condition: new, Year of construction: 2019, pressure:275 t distance between columns:3000 mm total power requirement:30 kW Nedpfefxyigox Afaocn weight of the machine ca.:40 t draw back pressure:27 t pump capacity:Axialpumpe mit Proportionalventil :6000 mm :max. 3000 mm Table dimensions:6000 x 3000 mm table height over floor:700 mm distance between table / ram:1100 mm :450 l traversing speed:auf X und Y, 30-33 mm/sec. down speed:2-10 mm/sec :2-50 mm/sec. Cylinder hub:900 mm Cylinder diameter:440 mm Stestle extension:200 / 200 mm / Ø :40 mm Siemens Control System:S7 1200 Monitor Siemens 9":Touch Panel Tax desk:tragbar

Condition: new, Technical data: Nodjk Nz Ntspfx Afascn Capacity: 160 t Installation height: 1100 mm Max. working area: 1100 x 350 mm Ram stroke: 400 mm Advance speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally adjustable cylinder via rack, pinion, and handwheel - Spacious working area - Height-adjustable table - Torsion-resistant design with welded steel construction - Manometer - Fine pressure adjustment - Additional hand pump Support prisms available at extra cost.

Condition: refurbished (used), Roller hearth furnace, make Mahler type: RHEE 500/100/3000-6500 refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h clear roll width: 500 mm clear height above roll: 100 mm furnace length: approx. 22100 mm Ncjdsfc Hbdspfx Afaon working temperature: - Warm-up zone: 800-1000°C - High temperature zone 800-1250°C heating: electric connected load: 400 kW gases used: nitrogen, hydrogen

Condition: used, Pressure: 200 t Length of stroke: 40-180mm Strokes by minute: 32 Up table size: 630x500mm Down table size: 900x800mm Technical characteristics: AIR CLUTCH Power: 15 HP DIMENSIONS: Ncsdpfx Afs Dvi Uoajn Height: 3000 mms Width: 1000 mms Length: 2750 mms Weight: 14000kgr New electric system

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: SKE000052, total length: 1,070 mm, total width: 1,200 mm, total height: 1,960 mm, cooling capacity: 27.82 kW (37.82 HP), The TCX4-90A series from Atlas Copco is a compact all-in-one chiller with an air-cooled condenser with integrated hydro module. The TCX28A chiller is specially designed for cooling water (or a mixture of water and glycol) for a wide range of industrial processes. Atlas Copco chiller TCX 28 A (indoor installation / +5°C) with integrated tank and 3 bar pump group Cooling capacity: 27.8 kW (37.2 kW) Absorbed power: 9.35 kW (9.33 kW) Water connection 2" Dimensions: 1067x1200x1960 mm lxwxh Nodpfxstq Twnj Afascn Used machine from year of construction 2022, very good condition, fully functional, without warranty

Condition: used, Year of construction: 2021, machine/vehicle number: HB 2022-A-073, Portal straightening press with 300 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 55 mm/sec c) table size 2500x1600mm d) open height 700 mm e) total size approx. LBH 4500 x 2300 x 3700 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) table in grid construction,with T grooves according to customer's request, otherwise 22mm i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 50 T to 300 T via MONITOR k) bridge moves by two gear motors, via racks l) Cylinder moves to the left and to the right via toothed racks m) Machine body double painted n) Cylinder induction hardened Type of construction Press design PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 3,000 kN Free ripping force max. 500 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 700 mm Stroke and min. opening 700 mm/ 0 mm Table height above floor approx. 9ß0 mm Height above floor (headroom) approx. 3700 mm Hall height min. 5.000 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 22 T Speeds Fast closing with 17 mm sec. Pressing speed 8 mm sec. Opening 55 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel after max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 350 bar Pressing pressure build-up time 02. mz sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 93 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24 V DC Ncodsh Agnuopfx Afajn Frequency 50 Hz Hydraulic connection Main motor IE3 22 kW Total connection Approx. 30 kW

Condition: new, Compressive force: 30 to Piston stroke: 150 mm table width: 185 mm passage (E): 535 mm passage (F): 140 mm distance cylinder - table (F1): 40 mm distance cylinder - table (F2): 1100 mm cylinder movable (M): 200 mm width (A): 800 mm depth (B): 700 mm Height 1 (C):1770 mm height 2 (D): 1800 mm Weight: approx. 168 kg Equipment: Njdsb Ibdljpfx Afaecn - Two adjustable speeds for piston feed by means of hydraulic pump. - Powerful workshop presses for craftsmen and repair shops - Optimal price-performance ratio due to rational design - The standard foot pedal leaves the hands free for the workpiece - Increased range of application due to the optionally available pressure mandrel set (10 pcs.). - Pressure cylinder with integrated return spring for piston retraction - Welded steel frame for heavy duty and high stability - Versatile use due to pressure cylinder that can be moved to the left and right

Condition: new, pressure 30 t Ncsdpfxeitt S To Afaen stroke 400 mm daylight longitudinal/sideways 740 x 300 mm dayligth 900 mm liter capacity 6,5 l feed down 7,5 mm/sec feed up 12,5 mm/sec Motor output 2,2 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,35 x 0,85 x 2,1 m High-quality, hydraulic press can be used either by hand or by motor operate. Cylinders can be moved sideways. Safety valve at cylinder end position. CE marking