Work center

Biesse Rover 24 XL

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Travel Paths: • X-axis: 6170 mm • Y-axis: 1395 mm • Z-axis: 180 mm Machine Structure: • Gantry design with moving machining unit • 10 consoles (ATS) with adjustable vacuum pods • 30 movable support elements • Multi-zone vacuum system (4 working areas along the X-axis) Installation Dimensions: • Machine length: approx. 8850 mm • Machine width: approx. 4020 mm • Working length: approx. 7300 mm Clamping and Vacuum System: • 2 vacuum pumps each with 90 m³/h capacity • Vacuum modules in various sizes (360° rotatable) • Pneumatic clamping systems: • Front stops • Side stops (left/right) • Central stops • Uniclamp clamping units for workpiece thicknesses 40–98 mm • Sensors for recognising lowered stops Machining Units Main Spindle: • Power: 7.5 kW to 12 kW • Speed: up to 24,000 rpm • Tool holder: HSK F63 Drilling Head: • Vertical spindles: • 10 along X-axis • 10 along Y-axis • Horizontal spindles: • 6 along X • 2 along Y Additional Parameters: • Max. drilling diameter: 35 mm • Usable length: 45 mm • Max. projection: 60 mm Tool Change System Turret Tool Changer: • Capacity: 18 tools • Holder: ISO30 / HSK F63 • Max. tool diameter: 200 mm • Max. tool length: 160 mm Additional: • Pick-up changer with 2 positions • Provision for aggregates (e.g., saw units up to Ø 270 mm) Electrical: • Connection: 400 V / 50 Hz / 3 phase • Power: 22 kW Compressed Air: • Connection: 3/8" • Working pressure: 6 bar • Consumption: approx. 400 NL/min Extraction: • Connection diameter: 250 mm • Air flow requirement: 5300 m³/h • Air velocity: 30 m/s • Pressure loss: 1500 Pa Mechanical Data • Machine weight: approx. 4750 kg Additional Equipment • Automatic central lubrication • Chip conveyor • Air blast device for spindle • Pneumatic pre-installation system • Safety equipment according to Directive 98/37/EC • CNC control (Biesse system) Credpfx Aaoyvz Emjaoa

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Biesse Rover A 1542 CNC Machining Center Working area X: 4140 mm Working area Y: 1560 mm Working area Z: 245 mm Csdpfx Aajyh Nd Rsaera 5-axis electrospindle, HSK-F63 interface Vertical drilling heads: 17 Horizontal drilling heads in X: 6 Horizontal drilling heads in Y: 4 Grooving saw blade 25-position tool changer Worktable with 8 beams

Condition: good (used), CNC Machining Center for Drilling and Milling Operations on Wood Panels, Derived Materials, Plastics, and Non-Ferrous Alloys Precise and highly reliable thanks to high-quality components, this machine is ideal for both craftsmen and industrial manufacturers aiming to increase flexibility and production quality. The main structure is made of a single welded steel base frame, constructed with thick-gauge steel plates. TECHNICAL SPECIFICATIONS • Working area X - Y - Z: 6,170 x 1,380 x 180 mm • Axis stroke X - Y - Z: 6,635 - 1,780 - 250 mm • Axis speed X - Y - Z: 100 - 100 - 30 m/min • Worktable: 10 bars • Bar carriages: 3 • Vacuum modules: 3 per bar • Pendulum processing up to: 2,975 mm • Two independent work zones allow simultaneous processing of two identical, mirrored, or different parts • Lifting device for easy positioning of heavy and large panels • 5-sided machining capability • "C-shaped" open frame structure • HSD routing unit • Air cooling system • Inverter included • Tool magazine: 1 with 10 positions • Drilling unit: • Vertical drilling spindles: X = 7, Y = 7 • Horizontal drilling spindles: X = 2+2, Y = 1+1 • Integrated saw blade: Ø 120 mm • Control system: NC 500 based on PC • Easy programming and file import • Remote control panel/console • Teleservice and video diagnostics for real-time support • Automatic guide lubrication system • Vacuum pumps: 2 x 100 m³/h • Chip conveyor belt • Centralized extraction duct • Extraction ports: 1 x Ø 250 mm • Safety devices: • Side protective curtains for the working unit • Perimeter safety guards with access door • Total installed power: 25 kW • Compressed air consumption: 400 NI/min • Operating pressure: 6.5 / 7.5 bar • Air consumption for extraction: 3,816 m³/h Crjdpfx Aetuxa Hjaaoa • Machine dimensions: 8,300 x 4,020 x 2,730 mm (h) • Machine weight: 4,100 kg + 600 kg (electrical cabinet) • Included documentation: user and maintenance manual, software manual, spare parts catalog, electrical diagram, CE declaration of conformity.

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: Credpfx Aoxraimeaasa 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Crodpfx Aov Sv Eneaasa Availability: short term Location: Röllbach

Condition: used, mileage: 1,208,995 km, power: 280 kW (380.69 HP), first registration: 12/1995, fuel type: diesel, number of seats: 52, gearing type: mechanical, color: red, brakes: retarder, Equipment: ABS, air conditioning, bathroom, parking heater, Mileage according to speedometer Engine: Mercedes-Benz V8 Euro: not known Crjdpfsu Rzglsx Aaaea Gearbox: 8-speed manual Seats: 49+1+2 high/fixed with lap belts Standing room: 48 _____ safety * Retarder * Cruise control * ABS, ASR * Fog lights Passenger compartment * Auxiliary heating * Air conditioning * Curtains * Luggage racks * Luggage nets * Jet ventilation * Double glazing * Refrigerator * Center WC * Head covers * Tour guide microphone Exterior * Double-width door * Power steering * Tachograph with windshield * Sun visor * Electric exterior mirrors * Ski boot eyelets * Central locking * Roof hatches, fans, roof ventilators Audio & communication * Radio/cassette * Video Miscellaneous * German vehicle registration document * Vehicle dimensions: Length 12.00 m, width 2.50 m, height 3.33 m * hubcaps * Twin tires * Approx. tires: VA.: 20%, HA.: 20% * Our internal vehicle number: 11137 Errors excepted. Pictures and text may differ from the vehicle. Over 300 vehicles always on offer.

Condition: used, Beams: 2700x120x50 mm 63 units Frames: 5200x1000x95 mm 17 units 4600x1000x90 mm 4 units 2300x1000x95 mm 2 units If you require racks or accessories in different configurations or versions, please contact us. We offer a comprehensive range of new and used racking systems and accessories, and are happy to assist you with your planning. Further accessories available, such as: Frame, corner, and collision protection, push-through guards, chipboard panels, wire mesh shelves, rear mesh panels, depth bars. Shipping: Please enquire about shipping costs, specifying your postal code, location, and the quantity of items required. Additional services: Planning, rack assembly/disassembly, purchase/sale Crsdpfx Aoh Izr Uoaaea Technical data, specifications and prices are subject to change and errors. Previous sale reserved!

Condition: used, machine/vehicle number: 007289, X axis working area: 3200 mm Y axis working area: 900 mm Cjdowukyqepfx Aaaera Main Electrospindle power: 4.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16

Condition: good (used), Weinig Hydromat H23 Cjdpfjwmw Nvsx Aaasra 50mm spindles 6,000 RPM Bottom 15kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Top 15kw jointer ready Bottom 11 kw jointer ready (straight jointer) + outboard bearing Top 11kw jointer ready (straight jointer) + outboard bearing Bottom 15 kw jointer ready Possible to add additional straight / profile jointers as needed !!! 15kW feed motor. Automatic lubrication system. Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: used, Year of construction: 2005, 2005 BIESSE ROVER B 4.40 FT 3-axis CNC machining center Technical features in the last photo Codpfewmdynjx Aaaera Engine hours on: 45,343 Machine hours in automatic operation (work): 27,267