Eccentric press

BMW TP3

Condition: excellent (used), Sell well preserved Helmerding eccentric press Very little used! Gsdpfx Aefdnw Hjbdjbg

Year of construction: 1983, condition: used, sheet width 1250 mm plate thickness 3,0 mm distance between columns 900 mm Gbjdpfx Ajnwr Dtobdeg power requirement 2,2 kW dimensions 3,27 x 1,69 x 1,29 m weight of the machine ca. 1,6 t used compact mech. guillotine shear - strokes per minute: 50

Condition: used, Year of construction: 1962, Working length: 1020 mm Sheet capacity max.: 3.5 mm Dimensions (WxDxH), approx.: 1640 x 1860 x 1390 mm Gbsdporh D Ttsfx Abdeg

Condition: good (used), Year of construction: 1977, machine/vehicle number: 1172, Offer 23443 Technical data: - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30 ° - Cutting gap adjustment by hand - Projection 200 mm - Manual backgauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirement incl. backgauge Gbedpfx Aborckh Sodog - approx. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg

Condition: good (used), Year of construction: 1970, machine/vehicle number: 30740, Offer 23465 Technical data: - max. working width 1040 mm Gjdporci T Ejfx Abdobg - max. material thickness (at 40 kg strength) 3.5 mm - Table width 300 mm - stand projection 100 mm - working height 880 mm - Front angle stop - 3 additional front support arms - Back fence manually adjustable 5 - 550 mm - Drive 400 V / 5.5 kW - E. foot switch - Space requirement including back gauge, without front support arms - approx. W 1500 x H 1250 x D 1400 mm - Weight approx. 1400 kg

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used SCHRÖDER motorized guillotine shear, type MHSU, built in 1994, No. 121204 Usable length: 1030 mm Max. sheet thickness: 2.5 mm Gbedpfx Abjv Tzphodjg - Pneumatic hold-down device - Front support arms 1000 mm - Digital back gauge 750 mm - Right-angle stop - Sheet support device - Forward sheet slide - Rear area protection with protective cage - Foot switch The machine is in stock at our location in 71334 Waiblingen-Beinstein and is available immediately.

Condition: used, Year of construction: 2008, sheet width 1530 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 34 Hub/min cutting angle 2.70 Grad distance between columns 1540 mm work height max. 920 mm Control konv. voltage 400 V engine output 3.2 kW weight of the machine ca. 1115 kg. range L-W-H 2275 x 2220 x 1400 mm Features: - Robust motorized swing-arm guillotine shear - Break-resistant, torsion-resistant welded steel construction - Compact and easy-to-use machine design - Manual backgauge, adjustable from the rear * Stepless adjustment across the entire travel range - 1x hold-down bar - 1x freely movable foot switch - Front, extendable table extension Gbsdpfjxyln Rex Abdsg - Rear safety device - Original operating instructions * Optional accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: used, Year of construction: 1963, sheet width 1040 mm plate thickness 2.50 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 90 Hub/min cutting angle 2.70 Grad distance between columns 1060 mm work height max. 940 mm back stop - adjustable max. 550 mm column arm 120 mm voltage 400 V engine output 4.0 kW weight of the machine ca. 820 kg. range L-W-H 1650 x 1200 x 1250 mm Equipment: - robust / motorized crank guillotine shears with motor drive - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analog position display * adjustable from behind * continuous adjustment over the entire travel range * travel range max. 550 mm Gbedpfxjxach Io Abdog - 1x hold-down bar - 1x side stop - 1x front support arm - original operating instructions

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, spindle speed (max.): 7,000 rpm, bar diameter (max.): 32 mm, number of slots in tool magazine: 23, Equipment: chip conveyor, TECHNICAL DETAILS Control: FANUC - F 32i-B Maximum bar diameter: 32 mm Number of axes: 7 Tool changer Number of places in the tool changer: 23 pcs. Number of driven tools: 6 pcs. Spindle speed for driven tools: max. 6,000 rpm Main and counter spindle Gbjdpfevt Sdvjx Abdog Maximum spindle speed: 7,000 rpm C-axis resolution: 0.001 ° Speed control: S command + direct 4-digit command Drive: AC spindle drive Drive motor (continuous operation): 5.5 kW Drive motor (30 min/60% ED): 7.5 kW Control axes Rapid feed X, Y, XB, ZB: 24,000 mm/min Rapid feed C: 198,000°/min (550 rpm) Maximum turning feed X, Y, XB, ZB: 10,000 mm/min Maximum turning feed C: 10,000°/min (27.8 rpm) Smallest input unit X, Y, XB: 0.001 mm Smallest input unit Z, ZB: 0.001 mm Smallest input unit C: 0.001° Machining performance Max. machining diameter SR-32J: Ø 32 mm Max. headstock stroke: 80 mm Max. drilling capacity fixed tool: Ø 13 mm Max. drilling capacity driven tool: Ø 8 mm Max. tapping capacity fixed tool: M12 x P1.75 Max. tapping capacity driven tool: M6 x P1.0 Max. milling capacity driven tool: Ø 10 mm Max. slot milling capacity driven tool: 1.5 mm (W) x 4 mm (D) MACHINE DETAILS Dimensions (L x W x H): 3,800 x 1,400 x 2,200 mm Machine weight: 3,100 kg EQUIPMENT - Main and counter spindle - 2 x C-axis - 2x tool turret - Chip conveyor - Bar loading magazine: FMB turbo RS 3-36-3200 - Part ejection - Part conveyor belt

Condition: good (used), Brand: HM Model: WKS 1000/4.0 Cutting length: 1000 mm Cutting capacity (steel): 4 mm Gedpfx Asw Hydvsbdjbg Cutting capacity (stainless steel): 2 mm Back gauge: 750 mm CNC controlled Hold-downs: 1 piece Table height: 780 mm