Machining center

Brother TC-22A

Condition: good (used), !! Bargain price !! !!You can't produce cheaper than this!! For sale is a package of 4 Brother machines. All machines are fully functional and were in operation until recently. Videos can be provided upon request. 1x Brother TC-22A (Year: 2008) incl. 4th axis (Lehmann) 2x Brother TC-S2A (Year: 1999) 1x Brother TC-S2A-O (Year: 1999) Brother TC-S2A Table size: 850 x 450 mm Travel X / Y / Z: 500 / 450 / 410 mm Table load: 300 kg Spindle taper: BT30 Spindle speed: 12 – 10,000 rpm Tool changer: 14 positions Feed rate X/Y: 1 - 10,000 mm/min Feed rate Z: 1 - 20,000 mm/min Rapid traverse X/Y: 36 m/min Rapid traverse Z: 50 m/min The zero-point clamping system is not included in the sale Ljdpsxvy Nzefx Afgjrw Brother TC-22A Table size: 850 x 450 mm Travel X / Y / Z: 500 / 450 / 410 mm Table load: 300 kg Spindle taper: HSK 40 Spindle speed: 12 – 10,000 rpm Tool changer: 26 positions Feed rate X/Y: 1 - 10,000 mm/min Feed rate Z: 1 - 20,000 mm/min Rapid traverse X/Y: 36 m/min Rapid traverse Z: 50 m/min 4th axis by Lehmann Price: net, ex-works, loaded onto truck

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 1200 mm max. module 32 min. module 3 total power requirement 25 kW weight of the machine ca. 60 t dimensions of the machine ca. m Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Accessories / Special Features: * Hydrostatic guides in grinding slide, table and in all other guideways. * Completely covered working area with sliding doors. * Automatic grinding process for various cycles, with settings for roughing, finishing, fine finishing and automatic dressing cycle after preset number of teeth. * Profile correction is possible via appropriate dressing, as well as additional movement of grinding slide (depth and width crowning). * Approx. 50 change gears. * Grinding slideTilt display device. * Large coolant device with band filter and oil mist exhaust. * Separate switch cabinet. * Separate hydraulic unit. * Separate oil cooling unit. Condition : Very good. Machine can soon be inspected in our showrooms. It is not under power at present. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. The machine comes directly from a first class gear factory, where it was grinding Quality 5 - 6. Grinding diagrams are available. This type and quality of machine is rarely available. Lrodpfst Hwqqox Afgjw Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 111855/111856/111640, overall weight: 2,250 kg, Offer Package: Brother Machining Centers Two fully operational machines and one defective machine included free when purchasing the complete package. Single owner from original use. Lredpfexp N Dbjx Afgjw Machines powered and ready for demonstration. Machine No.1 Brother TC-22A – Year of manufacture: 03/2001 – Serial No.: 111855 Equipment: - Travel paths: 500 x 400 x 410 mm - HSK-A40 tool spindle - Spindle speed: 12–12,000 rpm - Coolant filtration unit 20 μm - Through-spindle coolant 70 bar - Interface for connecting Kitagawa rotary table - Machine weight: 2,250 kg Machine No.2 Brother TC-22A – Year of manufacture: 03/2001 – Serial No.: 111856 Equipment: - Travel paths: 500 x 400 x 410 mm - HSK-A40 tool spindle - Spindle speed: 12–12,000 rpm - Coolant filtration unit 20 μm - Through-spindle coolant 70 bar - Interface for connecting Kitagawa rotary table - Machine weight: 2,250 kg Machine No.3 Brother TC-22A – Year of manufacture: 03/2000 – Serial No.: 111640 – defective Included as a spare when purchasing the complete package Spindle controller PE9A300UXXXC03H defective Equipment: - Travel paths: 500 x 400 x 410 mm - HSK-A40 tool spindle - Spindle speed: 12–12,000 rpm - Coolant filtration unit 20 μm - Through-spindle coolant 70 bar - Interface for connecting Kitagawa rotary table - Machine weight: 2,250 kg Total price for all three items. Ex works Luckenwalde (Germany), not loaded, without transport. Individual sale of the machines may be possible.

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : HSK40 - Spindle speeds : 12.000 [rpm] - Spindle power : 7,6 [kVA] LINEAR AXES Lrodpfx Ajuhbt Rjfgjw - Travels on X/Y/Z axes : 500 / 410 / 610 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 26 - Tool exchange time : 0.7 [sec] TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 200 [kg] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 25 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1.640 x 2.100 [mm] - Machine height : 2.274 [mm] - Machine weight : 2.250 [kg] MACHINE HOURS - Number of working hours : 9070 [h] EQUIPMENT - CNC : BROTHER A00 - Electronic handwheel - Interface : RS232 - Workpiece probe : Renishaw OMP 60 - 4th axis : LEHMANN sans variateur - Chips conveyor - Coolant tank - Coolant through spindle : 70 [bars] - Oil mist extractor : AAF Astrosta - Electric transformer - Tool-holders : 42

Condition: used, Year of construction: 2012, grinding diameter max. 320 mm grinding length 1.500 mm centre height 160 mm Control Touch Jones & Shipman between centers max. 100 kg table: Traverse Z-Axis 1.645 mm traversing speed 0,0001 - 12 m/min swivable +5 / -5 ° x-axis: Traverse X-Axis 260 mm traversing speed 0,0001 - 6 m/min grinding head: grinding wheel motor 7,5 kW cutting speed 45 m/s Grinding wheel Ø x width x bore 450 x 50 x 203,2 mm Tailstock: Swivel range -15 / +90 ° turning speed range 0 - 660 U/min Torque 27 Nm tool adaptor MK 3 total power requirement kW weight of the machine ca. 8,5 t Lrodpfx Afetqmrpogew dimensions of the machine ca. 5,5 x 2,5 x 2,0 m Cylindrical Grinding Machine JONES & SHIPMAN - Suprema Easy 1500 E - Replacement grinding wheel flange - Multi-grain diamond (for circumferential and lateral dressing, 10mm, 1 carat) - Tailstock with micro adjustment (max. adjustment range +-0.05mm) - Pneumatic quill retraction - Two-jaw bezel (range 8-75 mm)

Condition: good (used), Year of construction: 1990, CNC Cylindrical Grinding Machine Make: TSCHUDIN Type: HTG 22 - 862 Year 1990 with MARPOSS E14 control and measuring control E5. center width : 650 mm center height : 100 mm grinding length : 620 mm Weight : ca.4 500 Kg. Lsdpfx Aoid Aphefgorw Further data See : TECHNICAL DATA SHEET With many grinding stones and holders Complete machine documentation available. Machine in stock.

Condition: used, functionality: fully functional, machine/vehicle number: 211433, workpiece weight (max.): 1,200 kg, Offered for sale is a Schaublin 135 lathe in good technical condition. The machine is fully functional with accessories. All guideways are in good condition, and the machine's geometry is sound. All slides run smoothly and evenly. Lrjdsv Rxhijpfx Afgow The machine was overhauled in 2002 and has always been serviced according to the manufacturer's specifications. Please take advantage of the opportunity to view this machine on-site.

Year of construction: 2008, condition: ready for operation (used), Control Unit Brand FANUC Lsdpjv Rr Rdsfx Afgsrw Model 310is-WA Main Drive Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 310 mm V-Axis Movement 200 mm U-Axis Movement 200 mm Workpiece Workpiece X 1050 mm Workpiece Y 775 mmm Workpiece Z 300 mm Additional Equipment Includes all accessories in the photos Includes digital documentation This 5-axis FANUC Alpha 1ID wire EDM machine was manufactured in 2008. It offers precision and efficiency for intricate metalworking tasks. If you are looking to get high-quality EDM capabilities, consider the FANUC Alpha 1ID machine we have for sale. Contact us for more information. Application Types EDM

Condition: used, machine/vehicle number: 007618, Max. panel width: 4400 mm Max. panel length: 4400 mm Lrjdpfx Aou N Sliofgsw Main saw blade projection: 72 mm No of Grippers: 6

Condition: ready for operation (used), spindle bore: 84 mm, Echea lathe model AII of 5000mm e.p diameter over bed 750mm, over neckline 1050mm, over carriage 500mm, diameter of the quill hole 84mm, 12 rpm of the motor from 8-850rpm, mounted with a 400mm universal plate with 3 self-centering jaws and a 600mm independent jaw plate, with fixed and mobile steady rest, lathe with protections, generally in good condition Lsdpfx Afju I Rl Ejgorw