High Speed Press

BRUDERER BSTA 20H

Condition: used, Parts cleaning system from renowned Austrian company Machine comes from company liquidation, was in operation until the end. Cleaning agents are included. Lhsdjvcrutjpfx Anxel

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, shaft length under head: 30 mm, section length (max.): 52 mm, Hilgeland CH1 KHA double-acting press Ljdeur N Daepfx Anxohl Year of construction 1970 The machine is ready for immediate use!

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. Lhsdpfev Sa I Tsx Anxjl It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE - Type: 45/4 - Year of manufacture: 2001 Lhsdouhpiyspfx Anxjl - Monovis Ø45mm 25LD - Right-hand analog control - Screw profile: PVC - 4 heating zones on cylinder - 4 tool heating zones - Motor power: 8.5kW - Up to 60kg/h Good overall condition, very clean machine

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Ljdpfoihf Ufjx Anxehl Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, clamping force: 500 kN, screw diameter: 25 mm, injection weight: 46 g, total height: 1,779 mm, overall weight: 4,200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Lhjdpfex D Eccsx Anxsl Additional equipment • Granule Dryer • Handling System • Conveyor Belt - 1400 mm x 400 mm • Precision Scale • Temperature Units - 2x HB‑Therm Machine Benefits Technical Machine Benefits • Exceptional energy efficiency • Enhanced platen rigidity and mold safety • Fully electric direct-drive system • Ultra-precise direct-drive motors with 0. 1 ms response time • Displacement: 52 cm³ • Spray pressure: 2180 bar • Tool clamping platens: 520 x 570 mm Extra Information Control Unit Advanced control system with NC5+ Automatic mold height and clamping force adjustment Energy-saving routines Dimensions Machine Depth 4308 mm

Condition: as good as new (ex-display), Year of construction: 2022, overall weight: 68 kg, pressure: 10 bar, input voltage: 230 V, hose package length: 5,000 mm, CRYONOMIC COB62+ dry ice blaster. Demo machine used for presentations by the distributor in Poland, condition like new. Used for about 20 h of demonstrations. Included in the scope of supply: machine, 5m hose, gun with standard nozzle. Max. blasting pressure: 10 bar. Air consumption: 0,5 - 5,5 m3/min. Dry ice consumption: 20 - 80 kg. Possibility to use additional abrasive module for more aggresive cleaning with abrasive. Possibility to use LED gun light. Simple and reliable operation and design backed by over 30 years of experience in manufacturing dry ice cleaning equipment. Lhsdpeq Rvakofx Anxsl Manufactured in Belgium.

Condition: used, Stretch blow molding machine by Etek Ledpfskucxlex Anxehl ISBM line = Injection stretch blow molding Stretch blow molding machine for single-use PET bottles made from PET preforms Stretch blow molding machine for production using the rotary process Manufacturer: ETEK / GF-Industries, Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 volts, 50 Hz Weight: approximately 6000 kg In like-new condition

Year of construction: 2019, condition: ready for operation (used), number of axes: 2, This Nikon V-12BDC was manufactured in 2019. It features a 305 mm screen diameter, a measuring stage of 250 × 150 mm, and integrated XY and angle digital displays for precise measurements. The machine includes a 3-position objective turret for quick magnification changes and high-quality halogen illumination for clear imaging. Ideal for production control and precision mechanics. Contact us for more information about this machine. • Laterally correct image (no reflection) for easy evaluation Lhodpfsx D I Etjx Anxol • 3-position objective turret for quick magnification selection • Magnifications: 10×, 20×, 50×, 100× • Screen diameter: 305 mm • Measuring stage travel: 250 × 150 mm (8" × 6"); rotary stage type 2 • Maximum workpiece height: 100 mm • Integrated XY and angle digital display for precise readings • Illumination: combination of contour (transmitted) and vertical (incident) light • Light source: 24 V / 150 W halogen for high-quality projection • 4-fold condenser in transmitted light with automatic illumination adjustment to magnification • Optics: semi-transparent mirror for clear incident-light image; telecentric lenses for distortion-free imaging across the full field • Focusing via movable optical head (stage remains stable to avoid measurement deviations) • Measurement accuracy: contour illumination ±0.1%; inclination/area illumination ±0.15% • Solid construction with precision-engineered guides; workshop-ready and easy to operate • Proven Nikon quality, made in Japan • Large projection area suitable for medium-sized and complex workpieces • Quick magnification changes via turret • Ideal for production control, toolmaking, precision mechanics, and sample inspection • Flexibly upgradeable with digital interfaces or SPC connectivity

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, overall weight: 500 kg, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 200 mm, torque: 24 Nm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, power: 0.005 kW (0.01 HP), The CMA 3-axis controlled tapping center is designed for the post-processing of laser-cut sheet metal parts and complete processing of small parts and tubes, for example. The machine offers the following processing options: Ledpfx Anorbz T Nsxehl - Thread cutting - Drilling (standard / with chip breaking / hollow profile cycle) - countersinking - Flow drilling (with optimum feed curve) - reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) - Radial compensation of the tool by means of patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine portal