Vertical machining center

CHIRON FZ 15 W baseline

Condition: good (used), Year of construction: 2014, functionality: fully functional, Siemens 840 control, pallet changer table, 20-position tool changer, through-spindle coolant (IKZ), Knoll coolant system. Fsdpfsyg H U Hjx Abuefu

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Fedpfx Abow T Sd Tjuefu Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: good (used), Year of construction: 2006, Spindle 12000 TR:MN CN SIEMENS SINUMERIK 258-38. Number of hours on the counter: 85 642 hours Ffsdpfx Abjn D D Nheueu total machine power 30 KVA stroke X 300 mm, stroke Y 400 mm, stroke Z 425 mm spindle speed 12000 rpm travel speed 60m/min tool attachment SA40 2 UNITS AVAILABLE

Year of construction: 2012, condition: good (used), Muratec MW120 GT for sale Ffodeifi D Topfx Abusu Used, in excellent condition. The machine can be viewed by appointment. Delivery is the customer's responsibility, but we can help with packing and loading of need. Delivery: EXW Székesfehérvár

Condition: excellent (used), FANUC 21i-T Control Center Height 175 mm Distance between centers 1000 mm Grinding head B-axis 1° Grinding wheel 500 x 63 x 203 mm Grinding wheel speeds -1'500 rpm Internal grinding attachement 60'000 rpm Work piece spindle head C-axis 0.001 ° Measuring probe Automatic balancing attachement Ffedpfxjyabt De Abuou Wheel dresser Misc. accessories MARCELS MASCHINEN AG

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 Ffedpfoxmhdnjx Abuju The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, table width: 850 mm, table length: 3,700 mm, overall weight: 18,500 kg, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2007 Travel / Stroke Capacities: Longitudinal (X): 3,500 mm Vertical (Y): 1,250 mm Cross (Z): 1,000 mm Table dimensions: Length: 3,700 mm Width: 850 mm T-slots: 5 x 22 H12 Fjdpfx Absxgn Efousfu Reference slot: 1 x 22 H8 T-slot spacing: 140 mm Paintwork: RAL 5011 (steel blue) RAL 7035 (light grey) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle 24 kW Spindle speed range: Spindle speed: 20-3,000 rpm Torque: 479 Nm Max. feed rate: X, Y, and Z axes 25,000 mm/min Mean acceleration: 2 m/s² Weight: approx. 18,500 kg HEIDENHAIN iTNC 530 HSCI Swiveling control pendant including Heidenhain iTNC 530 control (1 processor / 4 axes) with software options 1 and 2. Automatic Milling Head, Diagonal H4 Automatic indexing Soraluce “Diagonal” milling head, Type H4 / 2 planes with 2.5° x 2.5° indexing, 479 Nm, tool clamping force 18,000 N. Automatic tool changer: Automatic tool changer (random carousel) with 20 magazine positions: The automatic tool change is carried out in the vertical position of the tool spindle. Maximum tool diameter: 125 mm Maximum tool length: 250 mm Maximum tool weight: 15 kg Number of magazine positions: 20 Chip conveyor package: Three chip conveyors, two longitudinal screw conveyors and one cross hinge belt conveyor with integrated coolant tank, discharge height: 1,000 mm Coolant System 2: Coolant/lubricant system 2 with discharge via shower ring and internal coolant supply according to DIN 69871 Form AD, tank capacity 500 l + 150 l lift tank with pump, delivery rate 50 l/min, delivery pressure 5/8 bar. Increased delivery pressure of high-pressure pump from 15 bar. RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are sourced by us following a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, all identified visible defects and faults are professionally repaired by our expert service team.

Condition: excellent (used), Year of construction: 2011, operating hours: 5,040 h, functionality: fully functional, turning length: 1,250 mm, turning diameter over cross slide: 420 mm, turning diameter: 420 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 80 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 33 m/min, rapid traverse Z-axis: 33 m/min, bar diameter (max.): 80 mm, MAZAK QUICK TURN 300 Smart Operating Hours: Automatic Operation: 5,040 hours Fodewzkvfspfx Abusfu Condition: Very good condition, regularly serviced and meticulously maintained! Capacity & Working Area Max. swing diameter: Ø 720 mm Max. turning diameter: Ø 420 mm Max. bar stock diameter: Ø 80 mm Max. machining length: 1,200 mm Main Spindle Max. spindle speed: 4,000 rpm Spindle nose: JIS A2-8 Rated power (40% duty cycle): 26 kW Max. torque: 750 Nm Turret Number of tool stations: 12 Tool cross-section: 25 mm (external), 50 mm (internal) Feed Axes Rapid traverse (X / Z): 30 / 33 m/min Travel (X / Z): 240 mm / 1,314 mm Tailstock Taper: MK NC axis, pressure controlled via M-codes Max. axial pressure: 10,000 N Dimensions & Weight Machine dimensions (L x W x H): 3,770 x 1,810 x 1,900 mm Weight: 7,100 kg (without chip conveyor and coolant) Chuck: Kitagawa BB210 with through-hole Chip Management Mayfran hinged belt chip conveyor Coolant pump 8 bar & chip flush General Specifications: SD MEMORY I/F (1P) + USB MEMORY I/F (1P) Mazak standard colour NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill (650U/1250U) Operator door with safety interlock switch Double foot switch Fully enclosed work area Work area lighting Safety devices according to global standards Complete coolant system Chuck status notification Automatic tool setter (Tool Eye) 10.4" colour display EIA/ISO package LAN interface

Condition: used, Year of construction: 2005, weight of the machine ca. 7.800 kg Ffsdpfx Ajudc S Hsbueu dimensions of the machine ca. 3.380 x 3950 x 3015 m

Condition: like new (used), Year of construction: 2023, operating hours: 1,000 h, functionality: fully functional, turning length: 640 mm, turning diameter: 460 mm, spindle motor power: 15,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 230 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 640 mm, Driven tool speed: 12,000 rpm Driven tool power: 8 kW 15-position turret Automatic tailstock Tool length measurement Chip conveyor Automatic door Robot interface prepared Fsdpfox Sy Daox Abuofu Set of fixed and driven tool holders