Datron MLCube B

Datron MLCube B

Condition: ready for operation (used), Year of construction: 2018, operating hours: 10,851 h, travel distance X-axis: 1,520 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 245 mm, overall weight: 2,500 kg, number of axes: 3, This 3-axis Datron MLCube B was manufactured in 2018. It features an impressive X-axis travel of 1520 mm, Y-axis travel of 1150 mm, and Z-axis travel of 245 mm. The machine is equipped with a high-frequency spindle capable of reaching speeds up to 60,000 rpm and includes a 15-fold automatic tool changer. If you are looking to get high-quality machining capabilities, consider the Datron MLCube B vertical machining centre we have for sale. Contact us for further details. • Portal clearance: 200 mm Nksdeymzy Depfx Aacju • Max feed rate: up to 20 m/min • Feed rates (XYZ): X 20 m/min / Y 20 m/min / Z 11.5 m/min • Spindle: High-frequency, 2.0 kW • Collet size: 6 mm • Max tool diameter: 8 mm • Tool changer: 15-fold automatic tool changer • Tool system: Direct shaft • Control system: DATRON CNC with terminal • Table clamping area: approx. 1000 x 1500 mm • Installed power (machine): 4 kVA • Electrical supply (machine): 3 x 400 V, 50–60 Hz • Operating pressure (machine): 0.7–1.0 MPa (7–10 bar) • Machine dimensions (without terminal): 2410 x 2280 x 1950 mm • Material produced: SMC, PVC, PC • 3D sensor for zero point is available Additional equipment • Hand control unit: B10-2 for HSPro • Vacuum plates: 1000 x 500 x 30 mm (3 pcs) • Vacuum pump: • Capacity: 200 m³/h • Motor power: 5.5 kW • Operating voltage: 3 x 400 V • Max fuse: 16 A • End pressure: 10 mbar • Weight: 150 kg • Software: PrimCAM-ET (second license)

Year of construction: 2009, condition: used, Technical details: tool taper: Ø 54 voltage: 3Ph AC 400V / 50-60 Hz V / Hz compressed air: Anschluß: 6 bar total power requirement: 11 kW Total weight, approx.: 120 kg dimensions L x W x H: 0,7 x 0,65 x 1,7 m Application: for secondary quick tool change through targeted inductive heating. Induction shrink fit unit with water cooling (tank 30 litres, built into the housing) Cooling medium: emulsion for Ø 3 - 50mm HM (carbide) and Ø 6 - 50 HSS tools Tool holder Ø 54mm Concentricity < 0,003mm ThermoGrip chuck Operation via control panel Nsdpfx Aaswp I S Hjcoku *

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 9 kVA, torque: 82 Nm, controller manufacturer: Siemens, table width: 560 mm, table length: 900 mm, table load: 600 kg, rotational speed (max.): 12,000 rpm, overall weight: 5,200 kg, number of spindles: 1, number of slots in tool magazine: 60, mount diameter: 40 mm, Equipment: chip conveyor, documentation/manual, Vertical machining center Nksdpfx Aaew Ei E Hecju DMG MORI SLIMline Multi-Touch Control Table size: 900 x 560 mm Table load capacity: 600 kg Direct path measuring system X, Y, Z SK 40 spindle taper 20 bar internal coolant supply 60-position tool changer Chip conveyor Renishaw probing kit for SIEMENS control

Condition: good (used), Injection molding machine Engel Victory 310-60 Electric CC200 Year of manufacture: 2006 Clamping unit type: Fully hydraulic Nsdjrg Hh Nopfx Aacsku Clamping type: Columnless Clamping force: 600 kN Plate dimensions (table dimensions): 720 mm Distance between columns: 450 mm Mold height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 mm Moving plate centering (D): 125 mm Fixed plate centering (D): 4,70 m Threaded holes on plates: 5700 kg Maximum mold weight: 1,40 m Dimensions (W x H): 2,70 m Machine weight: 5700 KG Heating channels: 9 Nozzle clamping force: 160 mm Nozzle stroke: 360 1/min Pump drive power: 13 kW Heating capacity: 9 kW Standard voltage: 400 V 50 Hz Oil capacity: 185 l Auger diameter: 35 mm Injection volume: 154 cm³ Injection pressure: 2400 bar Screw pitch: 24 mm Screw speed: 155 cm³/sec. Plasticization capacity: 40.6 Air injection speed: 290 Additional equipment: Monitor text in German CEE 16A plug socket CEE 16A plug socket Hydraulic core 2x Air fan 1x Water-cooled machine battery Machine without material tank Leveling elements Standard interface/Euromap 12 Schuko 10A plug socket Schuko 10A plug socket

Condition: excellent (used), functionality: fully functional, Filter for extraction of dust and sawdust. Nkjdstzld Uopfx Aacju

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter Nedpfx Aem E I D Hjacoku machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA installation and training not included. ( price depend on loacation and on request)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Biesse Rover K FT 2243 Machining Center The machine is equipped with one working area with two left-side origins, front and rear. Pneumatic stops WORKING UNIT: C-Axis electrospindle with 9.0 kW power BH10 boring head 1 circular saw blade, 120 mm diameter Automatic Loading and Unloading System (Sweeping Arm + Loading Suction Cups) Type A loading station – 3 reference columns Scissor lift Control system: BH660 fully PC-based Standard remote control panel Automatic lubrication system Vacuum system with zone clamping Electrical system bSolid software 250 m³/h vacuum pump Nkodsx I Iu Sjpfx Aaceu Working table dimensions FT: X 4298 mm; Y 2203 mm Available end of July 2026

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm Njdov Td Elspfx Aacjku

Condition: new, pressure 2,5 kN stroke 45 mm throat 90 mm Working height from to 80 - 220 mm table surface area 120 x 60 mm weight of the machine ca. 22 Kg dimensions 160 x 230 x 390 mm Nsdjfv Av Ijpfx Aacoku Hand presses with rack HZ 250 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 1,700 h, functionality: fully functional, machine/vehicle number: MP7/5/P, travel distance X-axis: 730 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, feed length X-axis: 585 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, spindle speed (min.): 1 rpm, spindle speed (max.): 42,000 rpm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, type of input current: three-phase, table load: 60 kg, workpiece weight (max.): 60 kg, overall weight: 8,000 kg, MP7-5 Axis with integrated pallet changer 5-axis with rotary/swivel axis Travel range X/Y/Z 585x250x400 mm Travel range B +/- 105 degrees Travel range C continuous Workpiece weight 60 kg Distance machine table to spindle nose 450 mm Machine dimensions (W x D x H) 2845 x 2370 x 3000 mm Machine weight 8000 kg Spindle speed 42,000 rpm Equipment: Control: Heidenhain TNC640 Main spindle: HVC140 HSK-E40 with rotary union for internal media supply - Max. speed 42,000 rpm - Milling power S1/S6 10 kW / 13 kW - For internal coolant supply, air and emulsion Oil mist extraction for oil/emulsion Dust extraction: L-CUT Machine-integrated workpiece changer for 36x EROWA ITS50 or 18x EROWA ITS115 Hand-held control unit with electronic handwheel and enabling switch Measuring probe system: Renishaw OMP400 Aerosol DRY LUBRICATION (ADL) - Precise dosage of media externally and through the tool Rotary table chuck: EROWA PowerChuck P on 5-axis Blum laser: LC50 Media distributor: MHT Tool changer 90 positions, HSK E40 Nkedpfoxlctbox Aaceu Warranty: 12 months Transport Initial commissioning on site Training