Vertical machining center

DECKEL MAHO DMU 50 T

Condition: ready for operation (used), Year of construction: 2001, operating hours: 28,585 h, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 9,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 50T was manufactured in 2001. It features a maximum spindle speed of 9,000 RPM and an impressive X-axis travel of 500 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine includes a turret with 16 positions and a round axis diameter of 700 mm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 50T vertical machining centre we have for sale. Contact us for further details. • Round axis: dia 700 x 500 Nkedpfxoympuve Aacju • Turning of the table: 360 deg • Swing zone: deg • Positions in turret: 16 Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Nedpfx Asu Aa I Ssacoku Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Year of construction: 2002, condition: ready for operation (used), Axes: 5, travel X/Y/Z: 500mm/400mm/400mm, speed: 9000rpm, spindle power: 9kW/13kW, tool stations: 16, max. tool length: 290mm, max. tool weight: 6kg, max. table load: 200kg, feed rate: 10m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 4500mm/4000mm/2500mm, weight: approx. 3400kg, control: Heidenhain MillPlus, operating hours: 34724h, spindle hours: 6490h. One operating button of the machine is defective, and the tool is sporadically not ejected. Documentation available. An on-site inspection is possible. This machine was used for training purposes. Nodpjx Aupiefx Aacjku

Year of construction: 1999, condition: ready for operation (used), Travel X/Y/Z: 500mm/400mm/400mm, speed: 9000rpm, spindle power: 9kW/13kW, tool holder: SK40, feed X/Y/Z: 10m/min, rapid traverse X/Y/Z: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, T-slot spacing: 63mm. Tool positions: 16, max. tool length: 290mm, max. tool weight: 6kg. Machine dimensions X/Y/Z: approx. 4000mm/2200mm/2500mm, weight: approx. 3500kg, control: MillPlus. Documentation available. On-site inspection is possible. Nodpfx Aasu T Riljcjku

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany Nkedoh Rdwxspfx Aacou We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: ready for operation (used), Year of construction: 1998, Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg. Nedsw Tc Nyepfx Aacsku

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430 MHaidenhain TNC 430 M, spindle speed (max.): 8,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 50 T was manufactured in 2000, featuring a Heidenhain TNC 430 M control system and a manual swivel rotary table for versatile 5-axis machining. It has a spindle speed up to 8,000 rpm, tool holder SK 40, and rapid traverse rates of 12 m/min in X/Y/Z. If you are looking to get high quality milling capabilities consider the DECKEL MAHO DMU 50 T machine we have for sale. Contact us for more information. • Rapid traverse (X/Y/Z) 12 m/min • Machining capability: 5-axis machining via manual swivel/rotary table axes • Cooling system: External coolant supply; capacity 80 liters; coolant used Alusol SL 51 XBB • Tool system: Tool magazine with 16 tool positions Nksdpfx Aeydk Npsacju Technical Specification Taper Size SK 40

Condition: used, machine/vehicle number: 632/6, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm table-size:480 x 450 mm Bruderer Double Roll Precision Feed:links stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm Nkjdpecxxycsfx Aaceu dimensions of the machine ca.:2,10 x 1,65 x 0,75 m with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: excellent (used), Year of construction: 1999, operating hours: 37,300 h, functionality: fully functional, X-travel 500 mm Y-travel 400 mm Z-travel 400 mm Control: Heidenhain TNC Speed range - main spindle 20 - 9,000 rpm Drive power - main spindle 9 / 13 kW Table diameter 700 x 500 mm Swiveling B: 105° (-10°/+95°) manually Rotatable 360° manually Max. table load 200 kg Nedpowm Nqrjfx Aacsku Number of T-slots: 7 Centering hole 30H7 mm Number of tool positions: 16 positions Tool holder ISO 40 DIN 69871 Max. tool length 290 mm Max. tool weight 6.0 kg Max. total weight 50 kg Max. feed rate 10,000 mm/min Total power requirement 17 kW Machine weight approx. 3.2 t Space requirement approx. 4.0 x 4.0 x 2.5 m

Condition: ready for operation (used), Year of construction: 1997, CNC milling machine Deckel Maho DMU 50 T Control: Heidenhain TNC426 Spindle speed: 20-9000 rpm Feed rate X, Y, Z: 20-10000 mm/min Rapid traverse X, Y, Z: 12000 mm/min Working area X 500mm, Y 400mm, Z 400mm Tool holder: SK40 DIN 69871 Drawbar DIN 69872 Tool changer: 16 positions Max. tool projection length from spindle nose: 290mm Nkedpfx Aaox Taq Nscsu Worktable: Manually rotatable and tiltable rotary table Dimensions: 700 x 500mm T-slots M14 Centering bore: 30mm Transport data: Weight: 3200kg Dimensions (length x width x height): 2.10 x 2.30 x 2.30m

Condition: as good as new (ex-display), Year of construction: 2022, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Nkedoph Uk Njpfx Aaceu Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: like new (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 200 kg, rotational speed (min.): 9,000 rpm, spindle speed (max.): 9,000 rpm, operating hours of spindle: 2,000 h, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, The machine is fully complete and ready for immediate use. Supplied with 25 tool holders. Software: Heidenhain 426/430. All manuals and documentation are complete. Nkodpfx Aaox Rqckecsu

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand HEIDENHAIN Model na Movement X-Axis Movement 500 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm This DECKEL MAHO DMU 50 T was manufactured in 2002. It features a spindle mount of SK40 DIN69871, a table size of 700x500 mm, and a maximum RPM of 9000. Ideal for versatile machining tasks. Contact us for more information. Nsdpfx Aox D Dukjaceku Application Types Milling

Condition: used, Year of construction: 2007, turning diameter 300 mm swing over bed 430 mm swing diameter over slide rest 300 mm control SIEMENS, SINUMERIK 840 D travel -x axis 160 mm travel -z axis 510 mm Part length max. 480 mm main spindle bore 53 mm main spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm main spindle drive 15 kW sub spindle bore 53 mm sub spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm sub spindle drive 15 kW C-axis resolution 0,001 ° C-axis rapid feed 1000 U/min tool turret 1 x 12 Stat. number of driven tool stations 12 tool shaft (cylinder shaft DIN 69880) VDI 25 Nksdpfxswx R Rks Aacou speed of driven tools 0 - 8000 U/min max. torque 16 Nm output 4 kW feed power X/Z axis 4000 / 6000 N rapid traverse X-axis 24 m/min rapid traverse Z-axis 30 m/min total power requirement 38 kVA weight of the machine ca. 4 t dimensions of machine L x W x H 2,65 x 1,84 x 2,32 m Accessories: collet fixture 173 E on main spindle, collet fixture 163 E on sub spindle, bar loading magazine make FMB, model turbo 3-36/3200 A, YOM 2018, for bar dia. up to 36 mm and bar length up to 3200 mm, various toolholders for turret (no driven toolholders), coolant

Condition: excellent (used), functionality: fully functional, Equipment: chip conveyor, Universal milling machine Deckel Maho DMU 50T with TNC 426 / 430 control from Heidenhain with chip conveyor Technical data: >> Year of manufacture 2000 >> Heidenhain control TNC 426 / 430 >> Travel paths X500/Y400/Z400 >> C and B axis manual with digital display >> Work spindle: Max. torque 88 Nm Max. spindle speed 20 - 9,000 rpm Tool holder SK40 >> Feed X, Y, Z -10,000 mm/min Rapid traverse X, Y, Z 12 m/min >> Tool magazine: Number of tools 16 >> Table Ø700x500mm >> Swivel range +95° /-10° >> Dimensions and weight: Dimensions 2,200 x 4,000 x 2,450 mm Weight approx. 3,500 kg >> Coolant system >> Power connection 400V kVA 17 Nodpfx Asvyr N Soacsku About the machine: Offered is a Deckel Maho DMU 50T universal milling machine with a Heidenhain TNC 426/430 control in very good condition. The table can be manually (digitally) adjusted using two additional axes B and C. The machine runs smoothly and precisely. The DMU 50T has a chip conveyor. Take the opportunity to view and try out the machine on site with power on.