Eccentric press

Dirinler CDCS 600 P

Condition: excellent (used), Year of construction: 2012, Soco Case / Carton / Box Taper Fully Stainless Steel Gedpfx Aksw Rr Dhohekd Top and Bottom Tape Heads (removable) Mobile on lockable castors Manual side drive adjustment Manual top head adjustment Tape sizes 28mm to 48mm In excellent condition

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: Press Model: T160 CNR6 Serial number: 160/0/46/00 Gsdpfxewaiw Ss Akhskd Year of construction: 2000 Nominal force: 1600 kN Weight: 13,800 kg Nominal number of strokes: 55 C/min. Min./max. number of strokes: 10/55 C/min. Max. number of insertions: 17 C/min. Min./max. clutch pressure: BAR 4.0÷5.5 Max. stop time: 0.22 s Safety distance: 355 mm. Energy (i=15% nominal strokes): 14,500 KJ Min./max. stroke: 10/200 mm Ram adjustment: 110 mm. PMI high adjustment: 430 mm Maximum extraction stroke: 60 mm Work surface dimensions (H, D, L): 78/750/1250 mm Ram dimensions (D, L): 600/850 Shank diameter: 60 mm Protrusion from the center: 370 mm Maximum mold size: 600/850 mm Maximum mold head weight: 344 daN Operating air pressure: BAR 5.5÷6 Stop position: TDC Voltage: V 380 Frequency: 50Hz Auxiliary voltage: V 24 NEW COMPONENTS INSTALLED: • Safety guards with safety keys; • Clutch plates; • Clutch pins and brite; • Flywheel bearings; • Flywheel oil seals; • Stroke change nose; • Balancing cylinder gasket kit; • Air pressure gauges; • Electrical panel; • Inverter (speed variator); • Motor; • Motor pulley; • Work surface revived on CNC machine Supplied with six (6) months warranty, technical documentation and CE conformity Twelve (12) months electrical panel warranty.

Year of construction: 2023, condition: new, pressure 40 t throat 195 mm stroke 8-78 mm no. of strokes 76-190 Hub/min ram - range of adjustment 60 mm table surface area 650x380 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm Gjdpfx Akjp Udupohjkd tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 2,2 t dimensions of the machine ca. BxTxH 1450x1220x2110 mm

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm Gkjdpfjvfhq Ajx Akhed tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Year of construction: 2023, condition: new, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW Gkodpfx Akop Uduhohed weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Year of construction: 1985, condition: like new (used), Wanzke hydraulic high speed press SP/F12 -WKG 499- Offered here is a hydraulic high-speed press from the company Wanzke. This press is in mint condition! Technical data: Manufacturer: Wanzke Type: SP/F 12 pressing force: 120 KN retraction force: 17,8 overrun time: 0,028 sec year of construction: 1985 Main drive: 1,5kW / 1,5kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overtravel: 2,8mm safety distance: 4mm Gsdpfxshgiyie Akhekd Accessories: decoiler GM1

Year of construction: 1987, condition: used, pressure 40 t Gkodpfjp Syctox Akhed throat 270 mm stroke 4-100 mm no. of strokes 130 Hub/min ram - range of adjustment 80 mm table surface area 670x540 mm ram surface 460x300 mm hole in the table Ø 100 mm table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 6 t dimensions of the machine ca. BxTxH 1500x2300x3300 mm

Condition: used, mileage: 9,300 km, power: 346 kW (470.43 HP), first registration: 08/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Like-new and excellently maintained M.A.N. 18-ton TGS flatbed truck with Palfinger PK 14.502 SH crane featuring 6-stage outriggers, a side reach of approximately 17 meters, and a vertical reach of approximately 20 meters, with remote control, 5 + 6 control circuits, a 6.20 m long flatbed, a payload of 6.1 tons, a 470 hp engine, and a wheelbase of 5.50 m, with only 9,300 km on the odometer, auxiliary drive, air suspension on the rear axle, intarder, air conditioning, auxiliary heater, digital mirror replacement system MAN Opti_View, and more. Equipment: 20,500 kg permissible total weight TGS TN long cab with bed and rear window Gkjdpfx Akez Hhk Eshsd Wheelbase 5,500 mm Euro 6 e engine 4x2 drive Unladen weight 11,860 kg Payload 6,140 kg with 18,000 kg permissible total weight Payload 8,640 kg with 20,500 kg permissible total weight New aluminum flatbed with split side panels and 4-way retractable boarding Flatbed dimensions approx. Length 6.20 m x Width 2.48 m x Height 60 cm Palfinger PK 14.502-SH folding crane, mounted behind the cab The crane has been inspected at a Palfinger workshop UVV crane certification valid until October 2026 Max. lifting moment 13.8 mt Only 610 operating hours according to the hour meter PAL com P7 remote control Engine Start/Stop with RPM increase Crane with 6-stage outriggers Rotation servo and grab control Oil cooler 10.5 kW Crane outreach up to 16.80 meters Lifting capacity at approx. 4.20 m / 2,950 kg // 6.20 m / 1,840 kg // 8.20 m / 1,300 kg // 10.30 m / 970 kg // 12.50 m / 780 kg // 14.60 m / 660 kg // 16.80 m / 530 kg 2-point hydraulic stabilizers with pivoting supports Transport position monitoring HPSC additional function 2. ballast Auxiliary drive, gear-dependent, type NH/4c, without flange, f=0.97, position approx. 3:30 Differential lock in rear axle MAN TipMatic 12.26 DD transmission MAN intarder with MAN EVBec, adjustable MAN Idle Speed Driving transmission function MAN freewheeling transmission function Air conditioning, Climatronic Water auxiliary heater, 4 kW Trailer hitch, ring-feder type 400 G 150A with pneumatic connections Permissible total weight of combination 44,000 kg Trailer load 26,470 kg Front axle with leaf suspension and rear axle with air suspension Front axle 9,200 kg, rear axle 13,000 kg Axle ratio i=2.85 Stabilizer for front and rear axle MAN EasyStart hill start assist Full brake assist Emergency brake assist EBA EBS ABS ASR ESP Lane departure warning LDW MAN Attention Guard Reversing warning Cruise control Sun visor Multi-function steering wheel MAN EasyControl control panel, 4 functions operable from the outside when the door is open Glass sunroof, electric Electrically adjustable and heated exterior mirrors Electric windows MAN SmartSelect infotainment control with touchpad and direct access buttons MAN Media System Professional Navigation 12.3 inch MAN Sound System Digital side mirrors Driver comfort seat with air suspension, lumbar support, shoulder adjustment, and heating Seat covers in comfort quality 2 air horns on the roof 2 revolving warning beacons, pre-installed Like-new condition Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information is without guarantee. Errors and prior sale are reserved. Internal vehicle number: 2475

Year of construction: 1985, condition: like new (used), Wanzke hydraulic high speed press SP/F12 double column press. -WKG 499- Offered here is a hydraulic high-speed press from the company Wanzke. This press is in mint condition! There are 2 presses on one stand. Technical data: Manufacturer: Wanzke Type: SP/F 12 Pressing force: 120 KN Retracting force: 17,8 overrun time: 0,028 sec Gkodpfxshgiwnj Akhjd year of construction: 1985 Main drive: 1,5kW / 1,5kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overtravel: 2,8mm safety distance: 4mm Strokes/min: Working stroke: 10mm/sec. rapid traverse: 20mm/sec Max.stroke: 100mm Table area: 320 x 300 x 280mm Accessories: Double decoiler type GMD1 Digital function control "Tronic press" with full upgradeability to CNC control. There are 2 pieces in total!

Condition: new, Year of construction: 2025, pressure 75 t stroke 8-80 mm no. of strokes 80-200 Hub/min ram - range of adjustment 70 mm table surface area 900x600 mm ram surface 900x470 mm hole in the table 450x180 mm dist. between columns - front to rear 500x350 mm Gkjdpjxh Swusfx Akhjd dist. between pillars (front to rear) 788 mm total power requirement 10 kW weight of the machine ca. 10 t dimensions of the machine ca. BxTxH 1600x1200x2800 mm