CNC turning and milling center

DMG MORI NTX 2000/1500 SZ Mapps-IV CNC

Condition: good (used), Year of construction: 2008, In good technical condition and fully operational. Year of manufacture: 2008. Additional Y-axis ±60 mm Maximum spindle speed 3,000 min⁻¹ Spindle motor power 22/18.5 kW Maximum driven tool speed 6,000 min⁻¹ - 300 mm chuck with 90 mm through hole, spindle head A2-8 - Increased power and torque 25/30 kW, 1,000/1,300 Nm - Turning diameter 420-500 mm Codpfx Aexdcigea Nogp - Turning length 1,250 mm - C-axis, driven tools - NC tailstock, fully programmable, separate motor - Increased Z-axis power - New chip conveyor

Condition: good (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Cgedpfsu Aa I Sex Aa Nop Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, number of slots in tool magazine: 36, table length: 2,200 mm, table width: 850 mm, controller model: OKUMA-OSP-HMI, coolant supply: 15 bar, distance table center to spindle nose: 950 mm, spindle motor power: 22 W, number of spindles: 36, rapid traverse Z-axis: 16 m/min, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 16 m/min, spindle nose: BT 50, spindle speed (max.): 10,000 rpm, spindle speed (min.): 50 rpm, table load: 2,500 kg, tool diameter: 120 mm, tool length: 400 mm, tool weight: 20 g, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA-OSP-HMI 3-Axis Vertical Machining Center with CNC Cgsdpfx Aou Dinkoa Nep

Condition: excellent (used), Year of construction: 2013, operating hours: 87,327 h, functionality: fully functional, We offer you: Universal CNC machining center Manufacturer: DMG MORI Model: DMU 210P duoBlock µ-Precision Year of manufacture: 2013 Control system: Siemens 840D sl Technical specifications: Travel distances: X-axis: 1,800 mm Y-axis: 2,100 mm Z-axis: 1,250 mm Swivel range: 360° Main spindle: Max. spindle speed: 18,000 rpm Drive power - main spindle (100/40% ED): 35 / 25 kW Rotary table: Table diameter: 1,700 mm Tool changer: Tool holder: HSK-63A Number of tool positions: 120 Operating hours: approx. 87,327 h Spindle hours: approx. 48,297 h Technical features & equipment: - Universal milling head with controlled B-axis - NC rotary table with cooled drive train - In-process tool measurement, type: BLUM Laser NT Hybrid Codpfx Asyhbcuja Negp - Coolant supply 40 bar through the spindle center - Coolant tank 2,500 l - Chip conveyor - Rotating inspection window - Electronic handwheel - 3D path control - Infrared measuring probe, Renishaw PP60 optical (OMP 60) - 3D quickSET - 4-color signal tower - Rinse gun with pump - Operating mode 4 - Machine adaptation for aluminum and glass machining, comprising: - Linear guides with additional Viton wipers - Ball screws partly with additional Viton/felt wipers - Sealing air for all linear measuring systems - Lubrication interval reduced to 10 to 15 minutes (overgreasing) - Adjustment of the maintenance plan for steel covers - Interface for camera monitoring and integration into the control system - Machine equipped for vacuum operation, including: - 2-channel rotary union, special centering bush and cable conduit in T-slots to the table edge - Additional compressed air connection at the table plate edge (opposite vacuum port) - Integration of vacuum monitoring with terminals for NC stop and error message "Vacuum error" - Oil-resistant rubber hose secured by 2 clamps at the rotary union - Evaluation of "minimum level" error in feed and spindle stop - Monitoring of coolant flow for internal and external supply - Machine prepared (cable routing) for use of spindle growth sensor (SGS) At the beginning of 2025, the ball screws and linear guides in X, Y, and Z axes were replaced. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if explicitly listed in the additional information. Technical data, information, and interim sale subject to change and errors!

Condition: ready for operation (used), Year of construction: 2010, operating hours: 7,186 h, controller manufacturer: HEIDENHAIN, controller model: ITNC530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DMG MORI DMU 60 MonoBlock was manufactured in 2010. It features a 60-tool automatic tool changer, a maximum spindle speed of 12,000 RPM, and SK40 tool holder. Additional features include a Heidenhain TS649 probe, 3D quickSET, and 40 bar through-spindle coolant. Ideal for complex and precise machining tasks. Contact us for more information about this machine. • Through-spindle coolant: 40 bar • Spray gun • Electronic handwheel • BA4 mode Additional equipment • Heidenhain TS649 touch probe • 3D quickSET (calibration/checking system) Technical Specification Taper Size SK 40 Csdpsx D Iirjfx Aa Nsgp

Condition: reconditioned (used), Year of construction: 2006, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock Codpfx Aaexn Aczj Nogp With MILL PLUS iT path control system Year of manufacture: 2006 Travel paths: X 800 Y 800 Z 800 mm Spindle speed range: 0 – 8,000 rpm, stepless (SK 50) Including the following accessories: - NC rotary table, 900 mm x 700 mm clamping surface (maximum table load 1.4 t) - Universal milling head with controlled B-axis - Universal tool changer with 40 magazine stations, double gripper (SK 50) - Fully enclosed guard cabin with sliding doors and interior lighting - ICS – 40 bar (internal coolant supply) - Chip conveyor - Rotoclear - 3D tactile probe Heidenhain TS 641 - Operating modes 3 + 4 - Electronic handwheel - 50 pcs. tool holders SK 50 - 3 height-adjustable machine feet - Transport device - Operating manuals

Condition: used, Technical details: Cgodpfjw Rktbsx Aa Nep grinding diameter: 600 mm grinding length: 2600 mm centre height: 180 mm workpiece diameter - max.: 360 mm swing diameter: 600 mm grinding wheel diameter: 600 x 305 x 160 mm total power requirement: 17,6 kW coolant device: 90 l/min work piece spindle speed: 12,5-250 U/min feed continuous: 0,05 - 6,0 mm weight of the machine ca.: 8,2 t dimension machine xH: 6,4 x 2,2 x 1,9 mm Final balance balancing device Tailstock with cylinder error correction Digital display X=0.001 - Z=0.01 Radius device 2-10 mm *

Condition: used, Year of construction: 2011, Mazak HC Nexus 5000-II Mazatrol Matrix Nexus Year: July 2011 Pallet Size: 500 x 500 mm Movement: - X: 730 mm - Y: 730 mm - Z: 740 mm Csdpfxjv Tvh Se Aa Njgp Spindle Speed: 12,000 rpm Tool Changer: 40 positions Chip Conveyor: Chrome

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm gear width 355 mm max. module 4,5 spindle bore 75 mm centre distance 410 mm min. number of teeth 2, 3 cutter diameter max. 115 mm cutter length max. 105 mm axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° milling spindle speeds 70 - 400 U/min axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U total power requirement ca. 9,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Cedevzhf Sspfx Aa Nogp Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices - Documentation

Condition: excellent (used), Year of construction: 2003, Deckel Maho DMU200P Year: 2003 Control Heidenhain iTNC530 Travels X: 2000 mm, Y: 1800 mm, Z: 1100 mm B-axis: 0.001° Codpfjx Swbcex Aa Njgp C-axis: 0.001° Number of controlled axes: 5 Table size 1700 mm x 1400 mm Spindle max speed 12000 rpm Spindle nose SK50 Tool changer 60 Positions Accessories/options: Through spindle coolant, (IKZ) 40 bar Swarf conveyor Touch probe Heidenhain TS642 elektr. Handwheel Heidenhain Tool measuring system Blum Laser