CNC lathe

DOOSAN PUMA 2600

Condition: like new (used), Year of construction: 2018, Doosan Puma 2600, year 2018/11 Hjdpjy Snuysfx Apnenl Fanuc Excellent condition, only 1000 operating hours Max. turning diameter: 481 mm Max. turning length: 790 mm Chuck: 250 mm Spindle bore: 76 mm 12-position turret Tailstock Chip conveyor Documentation

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm Hsdpfot Hw N Hox Apnjnl total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), Year of construction: 2020, CNC multi-function turning center with 9 axes Sub spindle, Y-axis, milling spindle, and turret with driven tools Milling spindle: X: 630 mm Y: 230 mm Z: 1585 mm Swivel axis: 240° 40 tool stations Capto C6 Coolant pump 20 bar Turret (lower): X2: 220 mm Z2: 1515 mm 12 driven tools Coolant pump 10 bar Travel distance of sub spindle: 1550 mm Main spindle: 10" chuck Bar capacity: 75 mm Sub spindle: 10" chuck Bar capacity: 73 mm Hedpfoy N T Dusx Apnsnl Control: FANUC F3B5 with 15" Features: Various accessories Oil skimmer Removable tool measurement arm Air conditioning in control cabinet AICC II (600 blocks) LNS chip conveyor, hinged belt right side

Condition: used, Year of construction: 2014, turning diameter 376 mm turning length 760 mm control Fanuc x-axis 260 mm z-axis 830 mm Hnodpfx Apsy Sblrenel weight of the machine ca. 6000 kg

Condition: excellent (used), Grinding length without magnetic table: 1500 mm Hnedpewlh Adjfx Apnel Maximum grinding width: 750 mm X-axis longitudinal travel: 1520 mm Y-axis transverse travel: 650 mm Z-axis vertical travel: 690 mm Grinding wheel diameter: 406 x 100 mm Spindle speed: 1400 rpm Weight: 8600 mm Accessories: Braillon magnetic table 1000 x 500 mm Elcon 3 electronic control

Condition: excellent (used), Year of construction: 2019, CNC lathe DOOSAN Puma 2600SY II with Siemens control system; Thermal sensors for maximum precision; Y-axis; Subspindle with collet chuck; Spindle bore 80 mm (main spindle); All axes with box ways – suitable for heavy-duty machining; Chip conveyor, tool setter, parts catcher with belt, coolant gun, extraction system; Hodpfxjy R S Uzs Apnsnl 70 bar high-pressure coolant system; Various fixed and driven tool holders included; Robot loading by Halter available upon request! Photo attached. An automatic door can be retrofitted for this purpose. In Germany, complete commissioning upon request. All at additional cost!

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,000 W, total height: 1,915 mm, total width: 1,985 mm, overall weight: 6,550 kg, controller manufacturer: SIEMENS, product length (max.): 3,857 mm, number of axes: 6, This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2022. It features a maximum turning diameter of 255 mm and a turning length of 760 mm. The machine is equipped with a 24-station tool turret and driven tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600 SY II horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D Control touchscreen with ShopTurn 15 inch display • 6-axis configuration with driven tools, Y-axis and sub-spindle • Main and sub-spindle as built-in motor spindles • Cylindrical roller bearing, accuracy class P4, lifetime lubrication • Main spindle chuck diameter 255 mm • Sub-spindle chuck diameter 175 mm • Hollow clamping device, hydraulically actuated • Hollow clamping cylinder • 24-station tool turret (BMT65P interface) • Automatic tool measuring arm, electrically swiveling • Dynamic spindle speed control • Counter spindle with tailstock function • Coolant flow max 448 L per minute • Oil flow 336 L per minute • Electronic safety clutch for X and Z axes • Working area swing over bed 780 mm • Swing over cross slide 630 mm • Max turning diameter 255 mm • Max turning length 760 mm • Bar capacity 76 mm • Max workpiece weight including chuck 250 kg • Main spindle bore 91 mm • Max torque approx 706 Nm • Sub-spindle bore 52 mm • Spindle speed up to 6000 rpm • Motor power approx 18.5 kW Hsdpfx Apjy E Izasnjnl • Torque approx 118 Nm • C-axis main spindle: 360° resolution 0.001°, speed 200 rpm, torque approx 1508 Nm • C-axis sub-spindle: 360° resolution 0.001°, speed 200 rpm, torque approx 121 Nm • Turret: 12 driven tool stations out of 24 • Max driven tool speed 5000 rpm • Driven tool power approx 7.5 kW • Driven tool torque approx 50 Nm • Rapid traverse X and Z approx 30 m/min; Y approx 10 m/min • Bed angle 30° • Coolant tank capacity approx 220 liters • Coolant pump pressure 7 bar • Hydraulic tank approx 20 liters • Central lubrication automatic system • Electrical connection AC 380 V, 3-phase, 50/60 Hz • Total power approx 69.27 kVA • Machine was never used (like new) Additional equipment • LNS hinged belt chip conveyor, right side, without filtration • Dormatec AF-30P oil mist extraction system • Boring bar holders, diameter 50 mm to 25 mm • Double boring bar holder, diameter 32 mm • Reducing sleeves set: 40/10, 40/12, 40/16, 40/20, 40/25, 40/32 • U-drill reducing sleeves: 40/20, 40/25, 40/32 • Two Eppinger driven tool holders BMT65P, straight, with external cooling Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Thread rolling machine ORT RP30U 2-roll Hsdpfx Apet H Ty Usnjnl 30 ton swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Power (Ton): 30 Number of rollers: 2

Condition: excellent (used), Year of construction: 2015, 1000mm Swing, 760mm max. machining diameter, 1540mm max turning length, 4000rpm main spindle, 76mm bar capacity, 12000rpm milling 18.5kW, Hnodpfx Apjw I Tnisnel C axis 0.001 degrees, Y axis -/+115mm, 40 station ATC, 12 station lower turret, milling speed 4,000rpm, 22kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, total height: 2,163 mm, total width: 1,945 mm, controller manufacturer: FANUC, controller model: i Series, product length (max.): 3,873 mm, number of axes: 4, This 4-axis DOOSAN Puma 2600YB II was manufactured in 2019. It features a maximum turning length of 725 mm and a swing over bed of 780 mm. The machine is equipped with a FANUC i Series controller and includes 12 turret stations for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600YB II machine we have for sale. Contact us for further details. • Working hours: 4436 h • Parts count: 305 • Swing over bed: 780 mm • Swing over carriage: 630 mm • Max turning length: 725 mm • Bar capacity: 102 mm • Spindle nose: ASA A2#11 • C-axis indexing: 0.001 degrees • Turret stations: 12 • Driven tool speed: 5,000 rpm • Rapid traverse (X/Z): 30 m/min Hjdpfxjy A N Dqo Apnonl • Tailstock taper: MT#5 Additional equipment • Chip conveyor • Tool setter • Manuals • CE Declaration Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW Hnedstycg Sspfx Apnol weight of the machine ca. 2.500 kg With rack and pinion unit Change gear set Year of construction: Approx. 1981

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,000 W, total height: 2,163 mm, total width: 2,005 mm, overall weight: 7,500 kg, product length (max.): 4,438 mm, number of axes: 4, This 4-axis DOOSAN Puma 2600 LYB II was manufactured in 2021. It features a maximum turning diameter of 376 mm and a turning length of 1,350 mm. The machine includes a 12-station turret, a live tailstock, and a steady rest with a diameter range from 40 mm to 200 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600 LYB II horizontal turning machine we have for sale. Contact us for further details. • Capacity Hsdpfx Apjytt A Ronenl • Swing over bed: 780 mm • Swing over carriage: 630 mm • Recommended turning diameter: 315 mm • Max turning diameter: 376 mm • Max turning length: 1,350 mm • Bar capacity: 102–103 mm • Main spindle • Nose: ASA A2-11 • Bearing diameter: 160 mm • Through-spindle bore: 115 mm • C-axis indexing accuracy: 0.001° • Turret • Stations: 24 (option installed; standard 12) • Tool size: 25 mm • Boring bar capacity: 50 mm • Indexing time: 0.15 s • Live tool speed: 5,000 rpm • Axes • C rotation: 360° • Rapid traverse • X: 30 m/min • Z: 30 m/min • C: 10 m/min • Tailstock • Type: Live tailstock • Quill diameter: 100 mm • Taper: MT5 • Quill stroke: 100 mm • Motor / Power • Live tool motor: 7.5 / 1.5 kW • Feed motor: 3.0 / 4.0 / 3.0 kW • Coolant pump motor: 0.4 kW • Electrical capacity: 46.40 kVA Additional equipment • 315 mm chuck • MORARI steady rest, 40–200 mm diameter range • Three motorized radial Eppinger live toolholders/spindles • Tool presetting system (tool presetter) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter over cross slide: 630 mm, turning length: 760 mm, turning diameter: 376 mm, spindle bore: 92 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,163 mm, total length: 3,560 mm, total width: 1,945 mm, turning diameter over bed slide: 780 mm, overall weight: 6,550 kg, bar passage: 81 mm, Equipment: documentation/manual, I am offering a Doosan Puma 2600 SY II CNC lathe, a high-productivity machine equipped with a Y-axis, main spindle, and sub-spindle, ideal for complete machining operations in a single setup. The machine is fitted with a bar feeder and numerous accessories, is fully operational, and can be seen running by appointment. The lathe is in excellent operating condition, regular maintenance has been performed, and it can be demonstrated in idle mode by appointment. Included accessories: . Top Automazioni bar feeder model X-Files S380SX . Chip conveyor . Tool presetting system . Bellegrandi collet chucks on main and sub-spindle Hodpfxeymdt Te Apnjnl . Workpiece pick-off arm with conveyor belt . Static and driven tool holders

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Technical details shown on picture. Hnsdpfxerpn Dvs Apnol

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and subspindle. Condition: Very well preserved, machine comes from a company liquidation. Time recording: Control unit on: 13127 hours Runtime: 3833 hours Processing time: 2835 hours The upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning. Fanuc 31i-B CNC control Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Hnodpfsyzzf Rjx Apnsl Maximum bar diameter (manual/continuous): 76/76 mm Y-axis travel: 230 mm (±115 mm) Clamp (counter spindle) ASA interface: A2-8 Spindle speed: 4000 rpm AC motor power (cont./30 min.) 22/26 kW Turning/milling head B-axis rotation / indexing 240 deg. (±120 deg.) Tool holder Capto C6 Speed in revolutions per minute 12000 rpm AC motor power 30 min. 15/18.5 kW 40-station ATC Tool turret Number of driven tools 12 (12)