Rotary Welding Table

DUMETA D-HB-60

Condition: new, Article: Welding rotary table 50 kg TYPE: KT-50 without jaw chuck Max. Load: 50Kg horizontal Max. Load: 25Kg vertical Rotation speed: 1-7,5 rpm Rotation direction: left and right Face plate speed: manually adjustable Face plate diameter: 315mm height of faceplate: 375mm inclination angle of face plate: 0-90 Motor power in operation: 0,08kw Motor power standby (Kw): NA dimensions: 430 x 430 x 375mm Nsdpsbambrjfx Ah Uslk Weight: approx. 38kg Power: AC 110V / 220V 50/60Hz Price is without chuck and height adjustable workbench Surcharge quick chuck 195.-€ Packing and shipping Germany approx. 80.-€

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) Nodpfxjfg E Hlo Ah Uslk • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Year of construction: 2021, condition: excellent (used), Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment dimensions: Nodpfx Ajm Ew Stjh Uelk height tilted min: 800mm height tilted max: 1900mm height horizontal min: 1050mm height horizontal max: 2000mm diameter of the clamping disc 1500mm length 2900mm, width 1400mm weight 3200 Kg speed from 0,01 to approx. 0,7 rpm.

Condition: new, Year of construction: 2023, cutting diameter 1100 mm saw band length 11000 x 67 mm cutting width 1,6 mm Nljdpfxjtq Dw Ej Ah Uok capacity 90 degrees: square 1100 x 1100 mm capacity 90 degrees: flat 1100 x 1300 mm total power requirement 7,5 kW / 3100 Nm weight of the machine ca. 8700 kg dimensions of the machine ca. 2800 x 1700 x 5200 mm The KSY 550 x 700 is a semi-automatic and column-guided horizontal bandsaw. The chips are transported away via a spiral conveyor. A chip trolley approx. 60 x 50 x 40 is included in the scope of delivery. The roller tables can be moved forwards and backwards via the control panel. There is a 1.40 x 1.00 metre roller table on the outfeed side. There is a motorised roller table 2 x 1.40 m on the infeed side. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Year of construction: 2022, condition: new, Load capacity: 10.000kg Speed: 0.03- 1.6 rpm Njdpfx Asfxgp Uoh Uslk faceplate diameter: 1.500mm, expandable to 2.500mm welding current transmission: 800A

Year of construction: 2011, condition: good (used), 1 used, well-preserved welding rotators, tank turning rolls designed for a load of 300 tonnes, consisting of Nedpsfn Hmzsfx Ah Uslk 1 driven unit 1 idler unit with the following technical data: Type : PR 3000 SB total load : 300t Load per unit : 150t Roller diameter/width : 850 x 250 mm; Roller material : steel Roller centre height : 778 mm from lower edge of machine frame Rotation speed : 65-1,230 mm/min continuously adjustable Support diameter : 1.000-9.000m electrics : switch cabinet permanently attached to the machine frame of the drive unit Control : wired remote control Supply voltage : 380/400 V, 3Ph, 50 Hz The system is also available for hire (trial hire)

Year of construction: 2021, condition: ready for operation (used), 20 identical welding machines are available. Type: cool41 U31, standard: IEC 60974-1, -2, -10 C.L.A, mains voltage: 400V, frequency: 50/60Hz, protection class: IP23, power consumption P min: 0.9kW, cooling capacity P max: 0.35MPa (3.5bar), max. current consumption: 2.5A, length: 539mm, width: 210mm, height: 415mm, weight: 22kg. Control: Comfort 2.0 with intuitive operation via click wheel, pulse spot normal mode continuously adjustable (especially for TIG welding), pulse pause ratio (balance) adjustable for example from 10-90%, Hz and kHz pulses up to approx. 15kHz, ActivArc technology dynamic arc control to ensure constant performance despite distance fluctuations and to prevent electrode sticking, improved root and penetration quality, spotArc Spotmatic functions for spot welding and tacking, 2-stroke and 4-stroke mode depending on torch trigger operation, manual metal arc welding often with MMA pulse automatic also integrated, gas pre-flow and post-flow times adjustable, upslope and downslope times also controllable, torch modes via torch trigger such as reduced secondary current, memory and job storage recurring welding tasks can be saved depending on version approx. 8-100 jobs, energy efficiency high efficiency, standby function available. Remote control and interfaces remote adjusters and functional torches can be connected, optional LAN WiFi gateway ewm Xnet, PC interfaces for parameter setting and monitoring. Very little used. An on-site inspection is possible. Nlodpexdc Upefx Ah Uek

Condition: good (used), Year of construction: 2003, load capacity: 150 kg, arm reach: 3,300 mm, Model: KR150 Condition: USED Year: 2003 Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets Nlsdpfxehakfas Ah Ujk Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: new, Year of construction: 2025, TTMC WELDING MANIPULATOR TYPE WP500 - Capacity horizontal 500 kg - Capacity vertical 250 kg - Table dimension 560 mm - Door stop 170 mm - Electric tiltable - Foot pedal - Documentation - 230V Nsdegg Rb Tepfx Ah Ujlk CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE

Condition: new, Year of construction: 2024, load capacity: 5,000 kg, Complete set including hand and double-foot remote control Digital speed display Hydraulic height adjustment Dimensions: Tilt height min: 800mm Nlodpfx Asl Dq U Ush Usk Tilt height max: 1900mm Horizontal height min: 1050mm Horizontal height max: 2000mm Clamping disc diameter 1500mm Length 2900mm, width 1400mm Weight 3200 kg Speed from 0.01 to approx. 0.9 rpm. CE certified