Lathe-conventional-electronic

EX-CELL-O 438/6-DLZ 500 SL

Condition: excellent (used), Between centres – 1000 mm Centre height – 311 mm Lajdpfxoxcpbaj Af Nei Max swing over bed – 660 mm Max swing over cross slide – 618 mm Max swing in gap – 690 mm Bed width – 384 mm Spindle bore – 52 mm Spindle speed – 18 speeds from 32 to 1600 rpm Carriage travel – 156 mm Tailstock quill diameter – 82 mm Tailstock quill travel – 120 mm Machine weight – 2150 kg

Condition: ready for operation (used), YEAR OF MANUFACTURE: 1963 Ledpfx Afexcw Axo Njai (see attached documents for technical data) Swing diameter: 600 mm Turning length: 1000 mm Equipment: - Three-jaw chuck Ø 250 mm - Four-jaw chuck Ø 250 mm - Tailstock center - Quick-change drill chuck MK5 - Documentation

Condition: as good as new (ex-display), For sale Demag Rotor NB! we have more than 15,000 Demag parts in stock Lodpjh Uqgyefx Af Njai see our website or other ads

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Ljdpfevtp Edjx Af Neai Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), EMCO Precision Lathe EMCOMAT 17 D Including 3-axis EMCO digital readout Year of manufacture: 2007 with CE mark 2 units available! Centre distance: 700 mm Centre height: 170 mm Swing over bed: Ø 340 mm Swing over cross slide: Ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Compound slide travel: 110 mm Compound slide length: 410 mm Compound slide width: 150 mm Bed slide guide length: 380 mm Tool section: 20 x 20 mm Distance spindle centre – compound slide: 34 mm Compound slide (support) swivel range: 60 / 120° Main spindle: Spindle mount: DIN 55029 (Camlock) Spindle bore: Ø 50 mm Internal taper to DIN 7178 1:22 Spindle diameter at front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. faceplate diameter: Ø 200 mm Spindle speeds: 40 - 3,000 rpm Infinitely variable speed adjustment Mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. rated torque at main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045–0.787 mm/rev 20 (28) cross feeds X: 0.023–0.406 mm/rev Threads: 20 (28) metric threads (basic equipment): 0.4 – 7.0 mm Tailstock: Quill diameter: Ø 50 mm Quill internal taper: MT 3 Lsdjxx S R Ajpfx Af Nsai Quill stroke: 120 mm Lateral offset: ±13 mm Permissible workpiece weight (between centers, unsupported): 50 kg, supported with tailstock: 150 kg Weight: 755 kg Dimensions: 1650 x 1060 x 1635 mm The EMCOMAT 17 D is a precision lathe suitable for all areas of mechanical engineering and training purposes. Equipment: - EMCO 3-axis digital display with color screen - Potentiometer - Emergency stop button - Digital speed display on control panel next to digital readout - 3-jaw chuck - MULTIFIX tool post, size B - Electrically interlocked chuck guard - Quick-action collet chuck - MICROJET coolant spray unit - Chip guard rear panel - Machine lamp - Machine feet - Bed stop Condition: Very good, from training facility Available from March 2026

Condition: good (used), Year of construction: 1985, functionality: fully functional, Lead and Feed Screw Lathe MARTIN KM 200 x 1000 Year of manufacture: 1985 HEIDENHAIN 2-axis digital readout Technical Data: Center height: 200 mm Swing over bed: 400 mm Swing over cross slide: 220 mm Faceplate diameter: 400 mm Ljdexx N A Ajpfx Af Neai Distance between centers: 1000 mm Bed width: 330 mm Spindle: Spindle nose: 6 DIN 55022 Spindle bore: 45 mm Spindle diameter at front bearing: 80 mm Morse taper in tailstock quill: MT4 Internal taper of main spindle: 1:20 metric 50 Spindle speeds: 40 to 1800 rpm Feeds: -- longitudinal: 1.10 mm/rev to 0.08 mm/rev -- cross: 0.40 mm/rev to 0.03 mm/rev Thread pitches: 18 metric threads: 0.5 - 7 mm 24 threads per inch (TPI): 56 - 4 TPI 13 module threads: module 0.25 - 3.5 Tailstock: Quill diameter: 60 mm Maximum quill travel: 170 mm Morse taper: MT4 Drive power: 5.5 kW Permissible max. workpiece weight between centers: without fixed steady rest: 750 kg with 1 fixed steady rest: 950 kg with 2 fixed steady rests: 1050 kg Installation dimensions: L 2,500 mm x W 1,500 mm x H 1,600 mm Weight: 1,400 kg

Condition: excellent (used), functionality: fully functional, 3-axis digital readout Centre distance: 800 mm Centre height over bed: 175 mm Spindle bore: 46 mm Lajdpfx Afoxyh D Us Nji 18 stepped speeds: 25 - 2000 rpm Power approx.: 2.2 / 4.4 kW .....

Condition: ready for operation (used), Rexroth Indramat MHP090B-035-HG0-UNNNNN Permanent Magnet Motor SN:MHP090-00147, used, normal signs of use, 100% functional, scope of delivery as per photos Laodpjt H Umpefx Af Nei