Vertical machining center

FANUC ROBODRILL α-D21LiB5

Condition: new, Year of construction: 2022, Vertical high-performance machining center FANUC Robodrill α-D21LiB5 ADVANCED Control: FANUC 31i-B5 Travel ranges X / Y / Z: 700 / 400 / 400 mm Distance spindle nose - table: 180 - 580 mm Clamping area: 850 x 410 mm Max. table load: 400 kg Max. spindle speed: 24,000 rpm Spindle power 1 min / S1: 26 / 5.5 kW Torque 1 min / S1: 35 / 7.5 Nm Kdjdpfx Ajg If Sgoa Rst Programmable feed rate: 30,000 mm/min Rapid traverse all axes: 54 m/min Acceleration X / Y / Z: 1.4 / 1.0 / 1.6 G (at table load 100 kg, tool 2 kg) Number of tool positions: 21 Tool holder: BBT 30 Max. tool length: 250 mm Max. tool diameter: 80 mm Max. tool weight: 4 kg Tool change chip to chip: 1.3 s (at tool weight 2 kg) Positioning accuracy (ISO 230-2): < 0.006 mm Repeatability accuracy (ISO 230-2): < 0.004 mm Automatic side door on the right Machine door Transformer AI - Contour Control II TWP - Indexing command for swiveling machining plane High Speed Smooth TCP Original FANUC warranty 12 months

Condition: good (used), Year of construction: 2013, functionality: fully functional, DECKEL MAHO PFRONTEN GMBH DMG MORI DMU 60 eVo Universal Machining Center Travel X/Y/Z: 600 / 500 / 500 mm Standard Spindle Speed Range: 20 – 14,000 rpm Motor Spindle: 18.9 / 14 kW (40/100% duty cycle) Standard Tool Holder: SK40 to DIN 69871 Control: Heidenhain iTNC 530 HSCI Operator Interface: SmarT.NC Kodsyzamaepfx Aa Rjdt Control Panel: DMG ERGOline Control Display: 19" NC Swivel Rotary Table Clamping Surface: 600 x 500 mm B-Axis Swivel Range: -5° to +110° C-Axis: 360° Table Loading Capacity: 400 kg Direct Measuring Systems Table Cooling Spindle Version: 20 – 18,000 rpm Tool Holder: HSK-A63 to DIN 69893 Tool Magazine: 60 positions Magazine Type: Chain magazine with double gripper Heat Exchanger for Spindle and Table Active Cooler for Control Cabinet Direct Position Measurement System Full Enclosure Cabin 3D Control Touch Probe: Heidenhain TS 649 DMG 3D quickSET Toolkit Preparation 3D quickSET Software Option 5-axis Machine Configurations Signal Light: Four-color Preparation for Handling System: PH 150-8 Chip Conveyor: Scraper belt chip conveyor with cleaned slotted screen Internal Coolant Supply (IKZ) Paper Band Filter: 40 bar / 231 l/min / 600 l tank Rotating Viewing Window Pressure Air Seal Linear Measuring Systems Bed Flushing Flushing Gun for Chip Removal Blow Air Through Spindle Center Selection via M-function Serviced Air with Low Oil Content Power Failure Safety Package Overvoltage Limiter Undervoltage Monitoring with Fast Braking Actuation Operating Mode 4 Production Process Monitoring Documentation: German Screen Text: German / English DMG / MORI SEIKI Messenger DMG Netservice Client Automation: DMG PH 150-8 Pallet Loading and Unloading System with Handling Unit and Pallet Magazine Rotary Storage: 8 positions Servo Axes: 2 Z-Axis: Pneumatic Gripper Arm / Fork IPC with Touch Panel DMG Automation Job Manager Graphical Operator Guidance Signal Light: 4-color Integration Kit: For DMU 50 / 70, DMU 40 / 60 / 80 eVo linear Chuck: Erowa UPC P Pallets: Erowa UPC 320 x 320 mm Number of Pallets: 8 Hole Grid: 50 mm Z Support: Steel Interface: Profibus Standard Automation Electrical Interface Version 4.0 Safety Door and Emergency Stop Signals Robot Side Machine Gross Weight: 11,000 kg Machine Net Weight: 9,500 kg Machine Dimensions: 400 x 280 x 315 cm IKZ Package Gross Weight: 800 kg IKZ Package Net Weight: 650 kg IKZ Dimensions: 200 x 175 x 190 cm Chip Conveyor Package Gross Weight: 640 kg Chip Conveyor Package Net Weight: 590 kg Chip Conveyor Dimensions: 355 x 140 x 170 cm Transport Traverse Package Gross Weight: 200 kg Transport Traverse Package Net Weight: 200 kg Transport Traverse Dimensions: 210 x 80 x 50 cm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, controller model: 31iB5, table width: 410 mm, table length: 850 mm, number of slots in tool magazine: 21, Equipment: documentation/manual, FANUC ROBODRILL ALPHA D21LiB5 MACHINING CENTER, YEAR OF MANUFACTURE 2016 EQUIPPED WITH FANUC 31iB5 CONTROL ELECTRONIC HANDWHEEL Kdjdpfx Aajy Tvfcj Ret TRAVEL: X 700, Y 400, Z 330 MM TABLE SURFACE: 850 x 410 MM DIRECT DRIVE MOTORIZED SPINDLE, BBT 30, 10,000 RPM 21-TOOL AUTOMATIC TOOL CHANGER 4TH-AXIS DIVIDER WITH DIRECT DRIVE LASER PROBE FOR TOOL MEASUREMENT INTERNAL COOLANT SYSTEM SPINDLE CHILLER

Condition: good (used), functionality: fully functional, Year of construction: 2009, Used tube bending machine from Jutec Kdodpfjyfmwxjx Aa Ret Type: 5000 Capacity: up to approx. 40 mm Mandrel length: 4500 mm CNC controlled Automatic head Manually rotatable head with hydraulic clamping Incl. 3 sets of tools Year of manufacture: 2009 Very little used

Condition: good (used), Year of construction: 2003, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 4,000 kg, number of slots in tool magazine: 120, controller manufacturer: Heidenhain, total height: 2,800 mm, total length: 6,000 mm, total width: 6,000 mm, overall weight: 12,000 kg, table length: 630 mm, table width: 500 mm, controller model: iTNC530, nominal power (apparent): 61 kVA, rapid traverse Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, spindle speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, table load: 4,000 kg, operating hours of spindle: 19,500 h, Equipment: chip conveyor, rotational speed infinitely variable, DMG DMC 60T RS3 with Heidenhain iTNC 530, no maintenance backlog, in good condition. Ideal machine for unmanned operation, geometrically within new-machine tolerance. The machine can be inspected and measured on site by arrangement. Machine Data: Machine description: Machining centre with pallet storage Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: good Equipment: - Direct linear measurement in X/Y/Z (glass scales) - Chip conveyor - High-pressure coolant system 40 bar (IKZ) - Extraction unit - NC rotary table - Tool magazine, 120 positions - Heidenhain measuring probe - Rotating viewing window - High-pressure coolant 40 bar - Signal lamp - Chip flushing Kjdpfxjrxrkle Aa Rodt - Operating mode 4 Technical Data: Number of axes: 5-axis Control: Heidenhain iTNC 530 NC rotary table clamping surface: 500 mm x 630 mm Weight: approx. 9,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Travels and axes: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: -90°/+12° Feed rates and rapid traverse: X-axis: 50 m/min Y-axis: 50 m/min Z-axis: 50 m/min B-axis: - C-axis: 30 m/min Motor spindle: Max. speed: 18,000 rpm Spindle taper: HSK A63 Tool changer: Automatic tool changer: Yes Number of magazine positions: 120 Pallet changer: 5 pallets

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle Kdjdpslz Rvlsfx Aa Rjt 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, table length: 4,000 mm, table width: 2,000 mm, spindle speed (max.): 22,000 rpm, torque: 128 Nm, spindle nose: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE Dimensions: mm 4.000 x 2.000 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to X-axis movement. AXIS CHARACTERISTICS Axis feed rate: mm/min 50.000 Acceleration: m/s² 4 WORKING AREA (CLEARANCES) Maximum horizontal clearance: mm 3.200 Maximum vertical clearance under crossbeam: mm 1.926 Height of worktable from floor: mm 330 CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. B-axis rotation range: ± 185° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Tool interface: HSK-A63 DIN 69893 The head is supplied complete with a cradle for handling and storage. The cradle is used outside the working area and therefore does not reduce the machine’s actual working capacity. CHAIN TOOL MAGAZINE – 30 POSITIONS (HSK) 30-position automatic chain tool changer located at the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter (adjacent pockets occupied): mm 90 Max tool length: mm 300 Max tool weight: kg 10 MEASURING SCALE PRESSURIZATION Pneumatic system complete with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL LUBRICATION/COOLING Mist lubrication system. The mist is generated by mixing air and oil and is controlled via M-function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and provides cooling. Highly effective for improving surface finish quality. Kjdpfezb Evlox Aa Rsdt EXTERNAL TOOL COOLING Coolant distribution system controlled by the CNC, with nozzles positioned on the flange around the spindle. Complete with a tank (1,200-liter capacity) for coolant collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS Maximum installed power: kW 150 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • No. 2 chip conveyors positioned on both sides of the worktable • User and maintenance manual and CE declaration of conformity

Condition: good (used), Year of construction: 2000,  Printing technologies installed: • 3 x Flexographic printing units • 3 x Screen printing units • Gravure capability (cylinder formats available) Maximum mechanical speed: 150 m/min Maximum web width: 417 mm Minimum web width: 166 mm Maximum print width: 407 mm Substrate thickness range: approx. 0.008 – 0.18 mm  Repeat ranges Flexo: 228.6 mm (Z72) up to 609.6 mm (Z192) Screen: 269.875 mm (Z85) up to 533.4 mm (Z168) Gravure: 304.8 mm (Z96) up to 609.6 mm (Z192)  Die Cutting Section Flat die cutting: Die cutting width: 407 mm - Repeat: 254 mm (Z80) up to 609.6 mm (Z192) Rotary die cutting capability installed. Unwind / Rewind Section Unwinder: • Martin nonstop unwinder • Core diameters: 76 / 152 mm • Maximum unwind diameter: 1000 mm • Maximum roll weight: approx. 485 kg Rewinder system installed. Kjdpfxeylypue Aa Rodt Electrical Data Nominal current: 500 A Connected load: 275 kW General Condition The machine is designed for web label production and represents a robust hybrid combination press with flexo and screen printing capability. The press is available for inspection by appointment.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 6,929 h, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5s POSmill H 500 U was manufactured in 2017. It features a Heidenhain TNC 530 control, a 60-station tool magazine, and a KESSLER rotary table with a diameter of 500 mm. The machine includes advanced systems such as automatic coolant level monitoring and a BLUM laser tool measuring system. Consider the opportunity to buy this POSmill H 500 U vertical machining centre. Contact us for further details. • Tool magazine: 60-station, HSK-A63 • Rotary table: KESSLER rotary table, Ø 500 mm • Spindle air blast: Air through the spindle • Internal coolant supply: 20 bar, with belt filter unit • Coolant system: Automatic coolant level monitoring • Media supply: 3-channel media supply at table center • Handwheel: Mobile electronic handwheel • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D touch probe); workpiece measuring preparation included • Viewing: Rotation viewing window included • Collision monitoring: POS DCM collision monitoring module • Condition: Top condition • Hours: 6,929 • Accessories note: Without tool holders and without quick clamping system Additional equipment Kdsdpfeyir Dxjx Aa Rot • Oil mist separator: Electromechanical • Hydraulic unit: Hydraulic aggregate, M-function controlled Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 2011, Milling machine Quaser MV 184, year 2011. The machine is sold complete, as shown in the pictures. Includes hydraulic vices, power unit, chip conveyor, belt filter system and extraction unit. Kdedsyfm T Hopfx Aa Rot