Surface and profile sanding machine

GEIBEL & HOTZ FS 635-Z-SL

Condition: used, OKAMOTO ACC 52 DX SURFACE GRINDING MACHINE MAKE OKAMOTO, MADE IN SINGAPORE MODEL ACC 52 DX CONTROL AUTOMATIC TABLE SIZE 200 x 600 mm MAGNETIC CHUCK 200.0 x 500.0 mm ELECTRO MAGNETIC GRINDING WHEEL SIZE 205.0 x 19.0 x 50.0 mm TRAVERSES X AXIS: 650.0 mm Z AXIS: 230.0 mm DISTANCE GRINDING WHEEL TABLE 47.5 – 397.0 mm TOTAL POWER REQIUREMENT 2.25 kW MACHINE DIMENSIONS 2600 x 1600 x 1800 mm MACHINE WEIGHT 2,100 kgs PLUS DIAFORM WHEEL PROFILLING ATTACHMENT Iedpfx Aew Elu Rjm Ejia FAGOR DIGITAL READOUT VERTICAL HEIGHT READ OUT DISPLAY CROSS TRAVEL READ OUT DISPLAY AUTOMATIC DOWN FEED HYDRAULIC MOVEMENT COOLANT SYSTEM 200.0 x 500.0 mm FINE LOOP ELECTRO MAGNETIC CHUCK PAPER FILTRATION SYSTEM

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Iedpfx Aoxtmqtsm Ejia Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2021, max. travel distances (transverse x longitudinal) 280 x 600 mm distance spindle /table 500 mm Grinding surface of table 250 x 500 mm Grinding Wheel Dimension 355 x 25 x 127 mm grinding wheel turning speeds 1.500 / 1.800 mm power requirement 2,2 kW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Iisdpfexp R D Nsx Am Eja Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2007, x-travel 620 mm y-travel 420 mm z-travel 400 mm control TNC 320 HEIDENHAIN spindle taper ISO 40 spindle turning speed range 50 - 4.000 U/min table-size 800 x 400 mm table load 400 kg feeds -stepless- 0 - 8000 mm/min rapid traverse 8,0 m/min power capacity 6,0 kW quill stroke 80 mm voltage 400 V total power requirement 17,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,90 x 2,70 x 2,05 m - .: 90288 - Control: TNC --- Iiedpoyq Sv Djfx Am Esa - electrical hand wheel - Horizontal milling spindle - Coolant equipment

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, table width: 450 mm, table length: 1,530 mm, table load: 350 kg, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Isdpfoxtbkuox Am Eoia Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, travel distance X-axis: 560 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 2,400 m/min, feed rate Y-axis: 2,400 m/min, feed rate Z-axis: 2,400 m/min, table width: 450 mm, table length: 950 mm, Fixed table 950 x 450 mm Feeds all direction ISO-40 and 3kW 3 Axis Digital Read Out Systsem CE-Safety  Coolant system with semi closed lower base  X-Axis: 560mm Y-Axis: 320mm Z-Axis: 400mm Table Length: 950mm Table Width: 450mm Table load: 350 Spindle speeds: 2240Rpm Iijdpfx Amjxdltbo Esa Feed rate X-Axis:2400mm/min. Feed rate Y-Axis:2400mm/min. Feed rate Z-Axis:2400mm/min. Stroke pinole: 0 - 95mm Length: 1800mm Width: 1600mm Height: 1900mm Weight: 1700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1991, pressure 63 t throat 325 mm stroke 560 mm dayligth 700 mm table surface area 640 x 640 mm die cushion capacity 25 t die cushion stroke 200 mm die cushion area 450 x 450 mm table height over floor 800 mm ram surface 560 x 560 mm oil volume 450 l total power requirement 15,0 kW weight of the machine ca. 7,0 t Iiedpfx Amovuuacs Eea required space 1,2 x 2,0 x 3,1 m year of manufacture 1971 - overhaul 1991 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, two-hand operation press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 2018, Operating hours: 600 h Technical Data: Travel range X/Y/Z: 450 / 350 / 400 mm Distance spindle nose to table: 230 - 630 mm (horizontal milling spindle) Rapid traverse speed X/Y/Z: 5000 / 5000 / 5000 mm/min Feed rate X/Y/Z: 10 - 2000 mm/min, stepless Max. feed force in X/Y/Z: 10 / 10 / 15 kN Clamping surface: 800 x 400 mm (fixed angle table) Max. table load: 30 kg (fixed angle table) Vertical milling head: Speed range: 10 - 5000 rpm Power: 10 kW Dimensions (LxWxH), approx.: 1980 x 2030 x 1990 mm Iedpfx Asxu I Txjm Esia Weight, approx.: 2,270 kg Equipment: - Swiveling control panel - Digital display based on Sinumerik 828D - Forward/reverse rotation of main spindle - Linear guides - Milling spindle with quadruple radial/axial bearing - Main motor with spindle brake - CE compliant

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, TECHNICAL CHARACTERISTICS: ROSS Press Model: T50 Nominal force: kN 500 Min./max. slide stroke: mm 8÷100 Max. slide adjustment closed height: 70/275 Speed: c/min. 90 Clutch pressure: Bar 5.5 Motor frequency (Hz) / speed (r/min): 50/1410 Work surface size: L=650 x D=520; Shank hole: Ø50 Ijdpfx Asu Rdw Hjm Esia Protrusion at the center of the ram: mm 260 Front passage: mm 290 Machine stop: PMS (top dead center) Complete with user manual and CE conformity Six (6) month warranty excluding electronic parts. NEW COMPONENTS INSTALLED: • Safety guards with safety keys; • Motor bearings; • Electrical panel; • Brake/clutch group; • Two-hand control; • Pedal; • Air regulator; • Plan revived on CNC machine

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Kunzmann WF 600 M milling machine (2012) Manufacturer: Kunzmann Type: WF 600 M Year of manufacture: 2012 Condition: used, very good Control: Heidenhain TNC 124 X-axis 600 mm Y-axis 400 mm Z-axis 400 mm Table length 650 mm Table width 350 mm Spindle speed 4500 rpm Vertical spindle and horizontal spindle - SK40 Hydraulic tightening system Main drive motor: 5.5 kW Dimensions approx.: 2 x 2 x 2 m Weight approx. 2000 kg Coolant system Scope of delivery: - Documentation - Machine light Iijdpfxjxwl Ule Am Eja - Machine feet - Machine vice