Vertical machining center

Haas S MiniMill

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar Ppedpfjv S Svvex Almet - Year: 2007 - including chip conveyor - coolant tank - immediately available

Condition: used, Year of construction: 2023, x-travel 3000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 15 kW distance spindle centre table top edge 140 - 860 mm table load 2500 Kg rapid travel x/y/z 50 m/min table width 3500 mm table length 820 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec Ppsdeyvvluepfx Almst wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 500 l total power requirement 46,7 kW weight of the machine ca. 15,4 t dimensions of the machine ca. 5,3 x 3,6 x 3,3 m Standard machine including the following optional extras: - Provision for dual oil mist extraction - Air cooling via the rotating milling spindle - 48-tool magazine - Pulse handwheel - 3-colour LED signal light - Additional work area lighting - Air blow-off device on the milling spindle - High-pressure coolant supply through the spindle (15 bar) - Provision for MAZAK Monitoring - Chip conveyor with left-hand ejection (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with automatic chip breaking - Synchronous thread cutting - Rapid traverse with constant angle of inclination STANDARD ACCESSORIES Adaptation for the European market USB port (1 port) Mazak standard colour Work area lighting SAFETY FEATURES Operator door with interlock switch Work area cladding The splash guard enclosure encloses the work area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply via spindle (pump pressure = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of high-quality components. FACTORY AUTOMATION Automatic start/stop and warm-up function Automatic activation of a warm-up via digital timer MEASURING SYSTEM Tool length measurement and tool breakage detection NUMERICAL CONTROL Horizontally adjustable NC control panel Relocation Detector Mazatrol SmoothG control 19" colour LCD screen (touch screen) Mazak Tornado tapping/drilling cycle (Mazatrol) EIA/ISO input function Tool path verification in the background 3D coordinate conversion Shape compensation for rotating axes Mazacc-2D software (contour correction) Mazacc-3D software package MAZACC-3D high-speed software package (NO456) is additionally required. Control system with high smoothing Interface for LAN SD memory card interface Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High-precision control for finishing - Seamless corner point control - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse paths, rounding function Absolute positioning system - All dimensions, weights and performance specifications are subject to change - - Used machine without warranty - - Subject to prior sale -

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 508 x 406 x 356mm, Table 1016 x 353mm, Spindle taper BT40, 20Hp spindle motor, Spindle Speed 10000rpm, Ppsdpfxsyw R Hpe Almot HAAS Control, 20 Station ATC, coolant.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: HEIDENHAIN TNC-620, total height: 2,500 mm, total length: 3,600 mm, total width: 2,500 mm, table width: 1,000 mm, table length: 450 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED "DOOSAN DNM 4500" vertical machining center with Heidenhain TNC-620 CNC Psdpew D Dy Njfx Almopt

Condition: as good as new (ex-display), Year of construction: 2021, Brand new, unused machine!!! DOOSAN LYNX 2100G Year: 2021/10 Max. turning diameter: 170 mm Max. turning length: 330 mm Standard chuck size: 6" Max. spindle torque: 118 N·m Psdpfx Aloy E Ixxjmopt Max. spindle speed: 6000 rpm Max. spindle power: 18.5 kW Parts catcher Control system – FANUC touch Cromar chip conveyor Machine documentation

Condition: ready for operation (used), Year of construction: 2017, operating hours: 67 h, spindle motor power: 22,000 W, spindle speed (max.): 3,300 rpm, travel distance X-axis: 615 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 1,585 mm, overall weight: 16,600 kg, controller manufacturer: MAZATROL, number of axes: 5, This 5-axis Mazak INTEGREX i-200 S was manufactured in 2017. It features full 5-axis simultaneous machining, a maximum machining diameter of Ø658 mm, and a maximum machining length of 1519 mm. The machine includes a robust tool magazine capacity of 72 positions and is equipped with both main and second spindles for enhanced capabilities. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX i-200 S turn-mill centre. Contact us for further details. • Operating time: Approx. 68 hours • Availability: Immediate • Key capabilities: • Full 5‑axis simultaneous machining • Main spindle + second spindle • Milling spindle with automatic tool changer • Complete turning and milling in one setup • Capacity and working range • Max swing: Ø658 mm • Swing over cross slide: Ø658 mm • Max machining diameter: Ø658 mm • Max machining length: 1519 mm • Bar capacity (main spindle): Ø102 mm • Bar capacity (second spindle): Ø65 mm • Max support mass (main spindle): 650 kg • Max support mass (second spindle): 300 kg • Main spindle (HD1) • Chuck size: 12" • Spindle bore: Ø112 mm • Motor output: 22 / 18.5 kW • Torque: 883.3 / 716.2 Nm • Acceleration time: 4.9 s • Air blow system: Included • Additional configuration: Heavy‑duty HD1 spindle; removal of standard spindle cylinder and chuck • Second spindle (HD2) • Chuck size: 8" • Max speed: 5,000 rpm • Spindle bore: Ø76 mm • Motor output: 18.5 / 15 kW • Torque: 325 / 238 Nm • Acceleration time: 4.5 s • Factory option: HD2 spindle synchronization function • Milling spindle • Max speed: 12,000 rpm • Motor output: 24 kW • Cooling: Oil & air • Tool interface: HSK‑A63 (T63) • 90° indexing time: 0.5 s • Acceleration: 1.27 s • Lubrication: Oil & air • Tool capacity: • O.D. turning tools: □25 mm • I.D. turning tools: Ø40 mm • Milling tools: Max Ø125 × 400 mm • Axis travels • W: 1574 mm • Rapid traverse: X/Z 50 m/min; Y 40 m/min; W 30 m/min Pedsy Sltgepfx Almjpt • Tool system and magazine • Tool system: CAPTO C6 • Tool magazine capacity: 72 positions • Automatic tool changer: Included • Functions: Tool breakage detection in magazine; Overload detection • CNC functions and software • 5‑axis machining function package • Tool radius compensation for 5‑axis • Cylindrical interpolation • Polar coordinate interpolation • Synchronous tapping with milling spindle • Cooling and preparation • Through‑tool coolant: 7 MPa • Preparation for oil mist extraction system • Highlights • Practically new condition with only ~68 operating hours • Very rich factory configuration • Full 5‑axis simultaneous machining • Main and sub‑spindle configuration • 72‑tool CAPTO magazine • Production‑ready with significant savings vs. new Additional equipment • Chip and parts handling • Side chip conveyor – Consep type • Belt‑type parts conveyor • Bar feeding and workpiece handling • LNS QLS II bar feeder • Bar feeder interface kit • Automatic parts catcher • Filtration • SEI FILTRATION unit • Series: JT040 • Model: 40/70‑V‑I‑R‑FM • Year: 2018 • Other accessories • Machine mounting anchors • 3‑color machine status signal lamp Technical Specification Counter Spindle Yes Driven Tools No

Condition: good (used), CHIRON FZ 08 KS Magnum is a 5‑axis machining center engineered for precision, high accuracy and reliable production. Travels X450×Y270×Z310 mm; drilling 12 mm; tapping M8. Tool magazine 24 pos., tool Ø max 47 mm (100 mm free), length 160 mm, tool wt 1.2 kg. Spindle HSK‑A40 0–36000 rpm; spindle motor 7 kW; rapid 75 m/min; 3×400V 50Hz; air 6 bar; installed power 14 kW (19 kVA); machine ≈3400 kg; dims 2308×1405×2447 mm. Features: tool‑break control, RS232, switch‑cabinet air‑con, status light. Delivers tight tolerances for automotive, aerospace, medical, watchmaking. Ppedpfx Asyxn Hcelmet

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105842, SPECIFICATION Table size 914mm x 356mm Maximum table load 1361Kg X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 +1 tools Tool to tool time 2.8 seconds Approximate weight 3500Kg MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (Removable) Wireless intuitive probing system Remote jog handle Swarf auger Pedpfx Aoykqtzolmopt High speed machining Programmable coolant nozzle Lighting Guarding Manual

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, torque: 18,500 Nm, controller manufacturer: Heidenhain, controller model: iTnc530, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, coolant supply: 30 bar, distance table center to spindle nose: 680 mm, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 90 mm, tool weight: 6 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Additionally, the machine is equipped with: Ppodpfeyh Ri Isx Almet - Spindle change-over gearbox - Flat guideways - Centralized oil lubrication - Control cabinet cooler - Spindle oil cooler - Grundfos IKZ pump - Oil skimmer - Hand wheel - Renishaw 3D measuring probe - Signal lamp - Tool cabinet - Various tool holders

Year of construction: 2016, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 6000 mm TRANSVERSAL TRAVEL: 1500 mm VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min SPINDLE: 337- 5000 rpm; 42 kW; 1180 Nm WORKTABLE: 300 x 2500 x 7000 mm HEAD: ISO 50 ; MILLESIMAL POSITIONING ; A/B AXIS AUTOMATIC TOOL MAGAZINE: PICK-UP ; 12 POS CONTROL UNIT: HEIDENHAIN TNC 640 Ppsdpfxsx Ru Azs Almst HIGH PRESSURE COOLANT: 20 Bar NOTE: AUTOMATIC HEAD CHANGE; COMPRESSED AIR INSIDE THE TOOL; RTCP; AUTOCAL SOFTWARE FOR AUTOMATIC CALIBRATION