Vertical machining center

HAAS VF-3

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 1,814 kg, overall weight: 7,485 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 44,700 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis HAAS VF-3YT/50 was manufactured in 2019. It features an impressive X-axis travel of 1,016 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine is equipped with a high-performance spindle capable of 10,000 rpm and a 30-position automatic tool changer. If you are looking to get high-quality machining capabilities, consider the HAAS VF-3YT/50 vertical machining centre we have for sale. Contact us for further details. Lrsdpfxozwd Auj Afwer • Condition: Used, fully operational • Operating/cycle hours: 6,744 h • Spindle/cutting hours: 4,454 hTravels • Spindle nose to table: 201–836 mm • Rapid traverse: 18 m/min • Maximum cutting feed: 12.7 m/minSpindle and tool changer • Maximum torque: 460 Nm • Drive system: Vector drive with 2-speed gearbox • Tool changer capacity: 30 toolsTable • Table size: 1,372 × 610 mm • T-slots: 7 • T-slot width: 15.9–16 mmShipping • Note: Dimensions listed as 1,370 × 660 × 630 mm are not overall machine dimensions • Export shipping dimensions (approx.): 3,970 × 2,600 × 3,230 mm • Approx. shipping weight: 7,485 kg Additional equipment • Chip conveyor with four additional augers • Haas Chip Lift • Through-Spindle Coolant (TSC), 300 psi / 21 bar • Programmable coolant nozzle • Coolant chiller • ACF 25-micron auxiliary coolant filter • Coolant mist condenser • Minimum Quantity Lubrication (MQL) • Automatic air gun • Through-Tool Air Blast (TAB) • PulseJet system • Renishaw Wireless Intuitive Probing System (WIPS) with probe riser block • Fourth-axis drive and wiring • High-Speed Machining (HSM) • DWO/TCPC (Dynamic Work Offsets/Tool Center Point Control) • RTAP-3 synchronized tapping • Wi‑Fi network connection and Wi‑Fi camera • Automatic door • High-intensity lighting • Approximately 15 tool holders • Complete documentation Technical Specification Taper Size ISO 50

Condition: used, turning diameter over slide rest 800 mm Control Siemens 802D Ljdpfov H Etdjx Afwsrr swing diameter 2000 mm centre height 1000 mm

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF3 SS Machining Center was manufactured in 2017. It features a robust 1219 mm x 457 mm table, capable of handling up to 794 kg. Equipped with a high-speed spindle reaching 12000 rpm and a 30+1 side-mount tool changer for efficient operation. Ideal for precision tasks with rapid movements up to 35.6 m/min on all axes. A great opportunity to buy this HAAS VF3 SS Machining Center. For more information about this Machining Center, please reach out to us. Additional equipment Lredpfezvvwhjx Afwsr • number of tools: 30+1 • Air Requirements: 113 L/min @ 6.9 bar, Inline Air Hose: 3/8 in, Coupler (Air): 3/8 in, Air Pressure Min: 5.5 bar. Machine Benefits Qualitative Machine Benefits • Bearing lubrication: air / oil injection • Cooling: liquid cooled Technical Machine Benefits • Max cutting feedrate: 21. 2 m/min • Rapids on x, y, z: 35. 6 m/min • Max thrust (x, y, z): 13723 n, 13723 n, 17450 n • Tool-to-tool (avg): 1. 80 s • Chip-to-chip (avg): 2. 40 s Extra Information Table Dimensions: Length: 1219 mm, Width: 457 mm, T-Slot Width: 15.90 mm to 16.00 mm, T-Slot Center Distance: 80 mm, Number of Std T-Slots: 5, Max Weight on Table: 794 kg // Electrical Specification: Input AC Voltage (3 Phase) - Low: 220 VAC, Full Load Amps (3 Phase) - Low: 70 A, Input AC Voltage (3 Phase) - High: 440 VAC, Full Load Amps (3 Phase) - High: 35 A // Shipping Dimensions and Weights:Domestic Pallet: 387 cm x 251 cm x 269 cm, 5316.0 kg // Export Pallet: 333 cm x 233 cm x 257 cm, 5316.0 kg // Domestic Pallet w/Conveyor: 387 cm x 251 cm x 269 cm, 6260 kg // Export Pallet w/Conveyor: 389 cm x 233 cm x 257 cm, 6260 kg // Domestic Pallet w/50+1 SMTC: 387 cm x 251 cm x 310 cm, 5525 kg // Export Pallet w/50+1 SMTC: 333 cm x 233 cm x 257 cm, 5525 kg // Domestic Pallet w/Conveyor & 50+1 SMTC: 387 cm x 251 cm x 310 cm, 5752 kg //Export Pallet w/Conveyor & 50+1 SMTC: 389 cm x 233 cm x 257 cm, 5752 kg // Domestic Pallet w/70+1 SMTC: 386 cm x 252 cm x 342 cm, 6278.0 kg // Export Crate w/70+1 SMTC: 386 cm x 258 cm x 359 cm, 6278.0 kg Technical Specification Taper Size SK 40

Condition: ready for operation (used), A Haas CNC vertical milling center is available. Travel X/Y/Z: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, max. table load: 1500kg, rapid traverse: 25m/min, feed rate: 16m/min, tool stations: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. An on-site inspection is possible. Ljdjyv H Hispfx Afwjrr

Condition: used, Year of construction: 2015, faceplate diameter 2000 mm turning dia. in gap 2400 mm length of gap 200- 630 mm travel -x axis 1700 mm travel -z axis 400 (+550) mm faceplate turning speed range -stepless- 5- 180 U/min centre height over plate 1140 mm Ljdpfx Afsydqpcewsrr diameter of main spindle 285 mm spindle bore 90 mm Control S 840 D max. workpiece weight 5000 kg max. torque on the faceplate 3000 Nm total power requirement 57 kW weight of the machine ca. 20 t dimensions of the machine ca. 5,5 x 3 x 2,8 m Machine was reconditioned and modernized in 2015 with Siemens 840 D CNC control. Originaly it was built in 1980.

Year of construction: 2010, condition: ready for operation (used), Travel X/Y/Z: 1016mm/508mm/635mm, speed: 10000rpm, table dimensions X/Y: 1219mm/457mm, max. table load: 1550kg, tool positions: 20, rapid traverse X/Y/Z: 25m/min/25m/min/25m/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/2600mm, weight: approx. 5400kg. Documentation available. On-site inspection is possible. Lrodeu T Rgqspfx Afwjr

Condition: used, Year of construction: 2019, operating hours: 6,744 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 18,000 m/min, feed length X-axis: 1,016 mm, feed length Y-axis: 660 mm, feed length Z-axis: 630 mm, feed rate X-axis: 12,700 m/min, feed rate Y-axis: 12,700 m/min, feed rate Z-axis: 12,700 m/min, nominal power (apparent): 45 kVA, torque: 460 Nm, controller manufacturer: Haas, controller model: Haas, workpiece length (max.): 1,370 mm, workpiece width (max.): 610 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 1,814 kg, total height: 630 mm, total length: 1,370 mm, total width: 660 mm, table width: 610 mm, table height: 630 mm, table length: 1,372 mm, table load: 1,814 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,454 h, spindle motor power: 44 W, number of slots in tool magazine: 30, Equipment: chip conveyor, We have two machines: SPECIAL PACKAGE PRICE – €125,000 FOR BOTH MACHINES Haas VF-3 YT50 (Ad ID A22113533) + Haas VF-4SS (Ad ID 22522747) Buy both machines together for €125,000. Excellent opportunity for a complete Haas machining package. • Haas VF-3YT/50, 2019. • 10,000 rpm original high-performance spindle, 44.7 kW, vector drive, gearbox • 2-speed gearbox • ISO 50 tool holder • 30 ATC (Automatic Tool Changer) • Chip conveyor with 4 additional lead screws • RTAP-3 – Synchronized threading without expensive holders with compensation • TSC 300 psi (21 bar) • Coolant chiller • Programmable coolant nozzle • MIN QTY LUBE • Automatic air gun • TAB – air cooling through the spindle • Renishaw WIPS – measuring, scaling, rotation • High-speed machining • ACF 25-micron filter • Electrical cabinet cooler • Mist condenser • 4th-axis pre-wiring • DWO/TCPC • WIFI connection to local network • WIFI camera • Automatic door • 15 tool holders • 4,454 hours of cutting (Spindle On Time) • 6,744 hours of cycle time The machine is powered on and available for inspection at any time. Lredpfxozc Ni So Afwor Complete documentation available. Original paint, no accidents, no crashes. Regularly maintained machine. Immediate availability.

Condition: new, functionality: fully functional, Year of construction: 2025, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity while simultaneously offering the lowest overall operating costs. The high-quality components used in this machine, as well as the latest version of the BENDtronic® control, which is installed as standard on all EVO machines, are particular highlights. HAEUSLER EVO 21015 4-roll round bending machine / roll bending machine Manufacturer: Haeusler Type: EVO 21015 4-roll round bending machine / roll bending machine Origin: Germany / Switzerland Condition: NEW, showroom machine Availability: 12-14 weeks Performance: Working width 2100 mm Round bending capacity 12 mm Pre-bending capacity 9 mm Standard equipment: • Variable oscillation adjustment of the side rolls VSA® • HAEUSLER Hybrid Drive System HHDS® • Movable 21.5" touch control panel including high-end BENDtronic® control • Infinitely adjustable rotation speed between 0 and 8 m/min • Machine prepared for remote maintenance • Electro-mechanical locking system for the rotation of the top roll • Automatic pressure adjustment of the bottom roll • Automatic pressure compensation of the bottom roll cylinder, standard cooling system for ambient temperatures up to 35° C • Automated axis optimization • Automatic shutdown of the hydraulics for the roll position • Ultra-compact design to reduce or even eliminate foundation costs • Safety emergency stop cord Optional equipment: • Two-roll drive for the top and bottom rolls Ledpfsxnnf Ijx Afwjrr • Taper bending device for bending conically shaped workpieces • Extended cooling system for ambient temperatures up to 45 °C • Upper support for easier bending of large diameters • Side support to assist in bending large diameters • Gas pressure accumulator for calibrating already welded cylinders • BendIT-Office workstation software • Autonomous bending • Machine prepared for quick change of top rolls • Interchangeable top rolls with different diameters for bending shots with small diameters • Hardened rolls if black and stainless material is to be bent • Infeed roller table for easy feeding of sheets into the machine • Centering device for the infeed roller table, for automatic centering of the sheets before bending Not the right machine? As a representative of Haeusler, we can put together and offer you your desired machine according to your needs. Further information on request.

Condition: used, Year of construction: 2014, operating hours: 7,500 h, 5-AXIS MACHINING CENTER BRAND: HAAS VF-3 SS YEAR OF FIRST INSTALLATION: 2014 Lsdpfx Aozminnsfwjrr TABLE DIMENSIONS: 1,219 mm x 457 mm MAXIMUM TABLE LOAD: 800 KG TRAVEL: X: 1,016 mm Y: 508 mm Z: 635 mm SPINDLE SPEED: 12,000 RPM TOOL MAGAZINE: 40 POSITIONS HIGH PRESSURE / INTERNAL SPINDLE COOLING RENISH PROBE PRESETTING ADJUSTABLE COOLANT NOZZLE

Condition: ready for operation (used), Year of construction: 2019, operating hours: 4,456 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, workpiece weight (max.): 1,814 kg, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel, X-axis: 1,016 mm Travel, Y-axis: 660 mm Travel, Z-axis: 635 mm Spindle speed: 10,000 rpm Rapid traverse rate, X-axis: 18,000 mm/min Rapid traverse rate, Y-axis: 18,000 mm/min Rapid traverse rate, Z-axis: 18,000 mm/min Feed length, X-axis: 1,016 mm Feed length, Y-axis: 660 mm Feed length, Z-axis: 630 mm Feed rate, X-axis: 12,700 mm/min Feed rate, Y-axis: 12,700 mm/min Feed rate, Z-axis: 12,700 mm/min Workpiece length (max.): 1,370 mm Workpiece width (max.): 610 mm Workpiece height (max.): 630 mm Workpiece weight (max.): 1,814 kg Table width: 610 mm Table height: 630 mm Table length: 1,372 mm Table load capacity: 1,814 kg Number of tool positions in the tool magazine: 30 MACHINE DETAILS Operating hours: 20,865 h (as of July 26, 2026) Machining hours: 4,456 h (as of July 26, 2026) Cycle hours: 6,745 h (as of July 26, 2026) Control system manufacturer: Haas Rated power: 45 kVA Torque: 460 Nm Spindle motor power: 44.7 kW Dimensions (L x W x H): 1,370 x 660 x 630 mm EQUIPMENT Chip conveyor with 4 additional feed screws ISO 50 tool holder 30-position automatic tool changer (ATC) RTAP-3 synchronized thread cutting Lredozlxnhjpfx Afwsr TSC 300 psi (21 bar) Coolant cooler Programmable coolant nozzle MIN QTY LUBE (minimum quantity lubrication) Automatic air nozzle Air cooling through the spindle Renishaw WIPS High Speed Machining ACF 25-micron filter Control cabinet cooler Mist separator 4th axis pre-wired DWO/TCPC WIFI connection to the local network WIFI camera Automatic door 15 tool holders

Condition: like new (used), Year of construction: 2018, operating hours: 531 h, functionality: fully functional, feed length X-axis: 1,016 mm, feed length Y-axis: 660 mm, feed length Z-axis: 635 mm, controller model: NGC, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, The Haas VM Series machines are high-performance VMCs that deliver the accuracy, rigidity, and thermal stability required for mold making, tool and die work, and other high-precision industries. Each machine features a generous work cube, a multi-fixturing table, and a 12,000-rpm inline direct-drive spindle. Standard features include the Haas high-speed control with full look-ahead, a side-mount tool changer, a programmable coolant nozzle, an automatic air gun, and much more. Inline direct-drive spindle Side-mount tool changer Multi-fixturing table High-speed machining software Ljdpfx Afszr U I Dowerr

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,163 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS was manufactured in 2017 and features a robust Haas CNC Control. It offers X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine supports a spindle speed of 12,000 rpm and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information. • Machine hours (as shown on the screen): • Power On: 25,416 h • Cycle Start: 8,164 h • Table: • Size: 1,372 × 457 mm • Tool changer: 30+1 positions (side-mount) • CNC control: Haas CNC Control Lrjdpfx Ajx D I Stjfwjr

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,792 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS vertical machining center was manufactured in 2015. It features a 1,372 × 457 mm table, a maximum load of 794 kg, and a spindle speed of 12,000 rpm. The machine includes a 30+1 side-mount ATC and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information about this machine. • Electrical: • Voltage: 354 / 488 V • Phase: 3 • Frequency: 50/60 Hz • Full load: 40 A • Largest load: 70 A Lrodpfx Aex D I Smsfwjr • Short circuit interrupting capacity: 10,000 A • Short circuit current: 5,000 A RMS symmetrical • Machine hours (from control): • Power on time: 19,635 h • Cycle start time: 8,564 h • Table: • Size: 1,372 × 457 mm • Tool changer: 30+1 side-mount ATC • Control unit: Haas CNC Control

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1124343, travel distance X-axis: 1,060 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, workpiece weight (max.): 1,800 kg, total height: 2,570 mm, total length: 4,000 mm, total width: 2,600 mm, table width: 630 mm, table length: 1,372 mm, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, HAAS VM-3 CNC Vertical Machining Center – 2015 Price: €36,900 + VAT For sale is a HAAS VM-3 CNC Vertical Machining Center, manufactured in 06/2015. The machine is currently connected and operational and can be inspected and demonstrated under power by prior appointment. Technical specifications Manufacturer: HAAS Automation Model: VM-3 Year of manufacture: 06/2015 Serial number: 1124343 CNC control: HAAS Classic Control Software: M18.24B X-axis travel: 1,016 mm Y-axis travel: 660 mm Z-axis travel: 635 mm Maximum spindle speed: 12,000 rpm Spindle taper: 40 taper Automatic tool changer: 24 positions Power supply: 354–488 V / 3-phase / 50–60 Hz Equipment / Options TSC – Through-Spindle Coolant HSM – High Speed Machining Renishaw workpiece probing system Tool measurement / tool setting system Automatic tool changer Chip removal system Programmable coolant Coolant system with filtration Machine data from CNC control Ljdpfx Afszt Nu Uewsrr Run Time: 14,870 hours Tool Changes: 117,359 Power Ons: 2,608 The machine is well suited for precision CNC milling, tool and mould making and demanding 3-axis machining applications. The machine is offered for sale as a used machine. Inspection, functional testing and demonstration under power are available by prior arrangement. Location: Slovenia, EU Additional information, photos and a video of the machine in operation are available upon request. On-site inspection can be arranged by appointment.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: 1084327, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, The following automation systems are also being auctioned from the same location: System 3R Workpartner (Search ID: 21119877) System 3R Workpal 1 (Search ID: 21119737) System 3R Transformer Workmaster (Search ID: 21119557) TECHNICAL DETAILS X-axis travel: 1,016 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Spindle speed: 10,000 rpm Lredsyfuq Tepfx Afwor Number of tool positions: 40 Tool holder: BT 40 MACHINE DETAILS Control: Haas Spindle hours: approx. 4,500 h EQUIPMENT Chip conveyor Hardened clamping plate, 20-M10 Tool measurement / tool breakage monitoring Digital 3D touch probe Renishaw Automation interface Automatic side door Oil mist extraction Internal coolant supply