Vertical machining center

Hedelius BC 80

Condition: good (used), Year of construction: 1999, Used machining centers from Hedelius Type: BC 80 X-axis: 2500 mm Y-axis: 800 mm Z-axis: 550 mm SK 50 tool holder Heidenhain CNC control with Siemens motors/servo Excluding tools/workpiece clamping on the table Excluding mist extraction system Lasdpfxoy U Ivio Anxeg Prepared for a 4th axis (4th axis not included) Year of manufacture: 1999 The machine is available immediately and can be inspected while powered on.

Condition: used, Year of construction: 2012, x-travel 2100 mm y-travel 1020 mm z-travel 762 mm Control Fanuc MXP-200FP spindle speed 6000 U/min spindle capacity ca. 22 kW max. torque on the spindle ca. 550 Nm tool taper SK 50 table surface area 2300 x 1020 mm max. table load 3000 kg Lasdpfx Anox Sr A Uexog T-slots 6 x 22 mm T-slot - distance 150 mm 3-Axis CNC Machining Center Equipment/Accessories: - Automatic tool changer with chain magazine, 40 stations - max. tool-Ø: 120/240 mm - max. tool length: 350 mm - coolant system with internal coolant supply and filter - emulsion mist extraction - electronic handwheel - 2 pcs. magnetic clamping plates 800 x 400 mm - various tool tapers SK50 - chip conveyor

Condition: good (used), Year of construction: 1997, Used Hedelius machining center Type BC 80 X-axis: 2500 mm Y-axis: 800 mm Z-axis: 550 mm SK 50 spindle Ledpfx Aozhat Djnxjag Heidenhain CNC control with Siemens motors/servos Includes tool/clamping system on the table Year of manufacture: 1999 Excluding chip conveyor

Condition: repair required (used), Year of construction: 1999, functionality: limited functionality, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 750 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 40, Hedelius BC 80 Ledpfx Ajzx Ecxonxjag This machine was primarily used for pre-milling operations at our facility until January and is currently out of service due to a hard drive malfunction. It has a Heidenhain control system, and the 4th axis is prepared but has never been installed. The drives were functioning without any issues; however, the spindle makes noise at higher speeds. As we need the space for our assembly operations, we are offering the machine for sale. Our asking price, ex works, is 6,000.00 Euros.

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning diameter: 545 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 570 mm, Equipment: chip conveyor, The MAZAK Integrex 100-IV is a compact and highly precise CNC turning and milling center designed for complete machining of complex workpieces in a single setup. Thanks to the combination of turning and milling functions, as well as the integrated B and Y axes, the machine is particularly suitable for demanding precision parts in the medical technology, mechanical engineering, and precision engineering industries. The machine was manufactured in 2007 and is equipped with the powerful MAZATROL Matrix control. This enables both dialog-oriented and ISO programming and offers modern functions for efficient and productive manufacturing. Key technical data: The travels are 410 mm in the X-axis, 140 mm in the Y-axis (±70 mm), and 570 mm in the Z-axis. The B-axis has a swivel range of 225°, enabling complex 5-axis machining. The C-axis of the main spindle operates with a high positioning accuracy of 0.001°. The maximum turning and swing diameter is 545 mm each. The main spindle reaches speeds of up to 6,000 rpm with a power of approximately 11 kW, which enables dynamic and precise turning operations. The integrated milling spindle operates with speeds of up to 12,000 rpm with a power of approximately 5.5 kW and is ideally suited for milling, drilling, and threading operations. The machine features a tool changer (available) with a maximum tool length of 210 mm and a KM tool holder, which ensures high rigidity and fast tool changes. Equipment: The equipment includes: • Chip conveyor • Tool measurement system "Tool Eye" With a machine weight of approximately 5,040 kg, the Integrex 100-IV impresses with its compact design, high precision, and flexibility – ideal for economical complete machining in modern production environments. Lsdpfx Anszpyvhexjag You are in the best hands with us – professional, reliable, and with a passion for machines! Necoyir I Rs Eanhd Held PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: excellent (used), Year of construction: 2000, x-travel 2500 mm y-travel 800 mm z-travel 750 mm Lajdpsxa Hl Dofx Anxeg Control HEIDENHAIN TNC430i table dimension - longitudinal 3220 mm table dimension - cross 800 mm tool taper ISO SK40 spindle turning speed range 15000 U/min connected load 25 kVA tool change unit 40 Pos. weight of the machine ca. 20 t dimensions of the machine ca. 6,5 x 3,8 x 3,7 m This HEDELIUS BC80 is in good condition and can be viewed under power by arrangement with the seller. Description: Designation: Hedelius BC80 Type: 4-axis machining centre Control: Heidenhain TNC430i Year of manufacture: 2000 Travel distance X: 2500 mm Travel distance Y: 800 mm Travel distance Z: 750 mm Table clamping surface: 3220 x 800 mm Tool holder: SK40 Tool changer: 40-fold Spindle power: 10 kW S1 / 15 kW S6 Spindle speed: 50 to 15,000 rpm Total connected load: 25 kVA Special equipment: - Partition wall for pendulum machining - Internal coolant supply - 4th axis Hoffmann with counter bearing, hydraulically clamped - Belt filter - Scraper belt chip conveyor - Flushing guns - Renishaw TS27R tool measuring system - Renishaw infrared workpiece measuring system - Ethernet connection - Hand-held control module Other: - Ball screw drive in X and Y replaced in 2018 - Complete documentation available Machine weight: Approx. 20 t Space requirement: 6.5 (width) x 3.8 (depth) x 3.7 m (height)

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 2,340 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 40,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 40,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,100 mm, total length: 6,500 mm, total width: 3,100 mm, table width: 750 mm, table length: 2,900 mm, table load: 2,800 kg, spindle motor power: 27,000 W, 3-axis CNC machine (VMC) Hedelius - BC80 /2300 Make: Hedelius Type: BC80 /2300 Control: HeidenHain iTNC530 Year: 2005 X - Travel: 2340mm Y - Travel: 800mm Z - Travel: 600mm Table Length: 2900mm Table Width: 750mm Table load: 2800 Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 27kW Speeds / ranges: 8000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 6500mm Width: 3100mm Height: 3100mm Weight: 13500kg Ledpfsy Enzajx Anxsag Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, 600mm C axis Table (360 degrees) +/- 90-degree head (B axis), 37kW Spindle Motor, Laodpfxszh Ncze Anxog 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Hurco Winmax 5 control, through spindle coolant, swarf conveyor, spindle probe.

Condition: ready for operation (used), Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l Lsdpjxaa Urjfx Anxsag operating pressure 340 bar total power requirement 14.0 kVA weight of the machine ca. 9050 kg range L-W-H 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition (!!) with only approx. 28.500 operating hours - in checked condition - machine video - ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Condition: like new (used), Year of construction: 2018, operating hours: 500 h, functionality: fully functional, LAGUN BM4RT Bed Milling Machine Manufacturer: Lagun Type: BM4RT Year of manufacture: 2018 Lsdpfxszmpydj Anxeag Condition: operational, used, like new Operating hours: 1650 h Spindle hours: 438 h Control system: Heidenhain iTNC 640 Video available. Further information upon request.